Key mapping on Symbol MC 9000 with Websapconsole

Hi Experts
I am trying to map hardver key on mobile device MC 9000 which should work as a function keys as on the desktop. I am using websapconsole 7.1 and as a browser I use pocket internet explorer.
In websapconsole administrator I checked field "Function key mapping" but it doesn't work.
I read that should by use CTRL + key but it doesnt work. I also try software Naurtech but with the same result.
Could anyone give me some suggestion how to map hardver(buttons on device) keys to function keys?
Urgently
Thanks in advance
ptako

Thrums1,
I've never had to "register" ViaVoice after updating the system. I thus suspect you haven't fully followed my above, three-step advice (particularly step 3).
1) Reinstall ViaVoice from CD.
2) Update to the latest version (using the patch downloadable from Nuance's website).
3) Replace the “temp” and “users” folders (in the "ViaVoice" folder at the upper level of your home directory) by a previous copy thereof. When I say previous copy, I mean a copy from when ViaVoice was still working properly, e.g. a copy from when it was running under Tiger.
As I said, I've gotten ViaVoice to survive several system updates by following the above steps. To my knowledge, the last step is critical since it saves you from having to reconfigure ViaVoice under the new operating system (in this case Leopard). I suspect that ViaVoice is crashing on your system because it's trying to start some module of the SetUpAssistant that is incompatible with Leopard (as many are). If you instead use old copies of the "temp" and "users" folders (from the previous system), then ViaVoice doesn't have to go through the initial "registration" process; ViaVoice doesn't need the SetUpAssistant; and all is (more or less) fine.
Good luck!
BTW, to my knowledge, Dictate only runs on Intel Macs. It thus won't run on a G4 iBook, just as it won't run on my PowerBook G4.

Similar Messages

Key mapping to symbols is incorrect on Asha 303

Hello everyone.
I just got a slightly used Asha 303 and noticed that the symbols obtained when you press the lower-left gray arrow key (like colon, slash, plus, parenthesis, etc.) are not those shown on the key caps. (e.g. semicolon is shown on the comma key, but pressing the 2nd and that key gives me an accented o. The other keys on that right side of the keyboard all give accented letters.) How can I correct/change this, even if it means manually re-mapping?
Incase it matters, This phone was originally sold in Malaysia, Thailand or China I think since those maps were pre-loaded on the memory card. There are no special characters on the keys though, other than some yellow stroke marks on the R,T,Y,F and G keys. I have since upgraded the device software, restored it to factory defaults and set the language to English but it didn't make a difference.
Any ideas are welcome.

Hi,
Welcome to the forum!
It doesn't matter if your phone was originally sold in other country. You should be able to see the exact character when you press the button. Have you tried to switch off the phone, take out the battery for a second and then switch on the device? What happened after that?
If switching off/on of the device didn't work and tried all the possible solution for your concern, it's best to have your phone checked with the Nokia Care Point. If your phone is already out of warranty, repair charges may apply.
Check from this link for the nearest Nokia Care Point in your area: www.nokia.com/support
Hope this helps.

Key mapping question. (for mobile phones with PC-like keyboard)

For phones with mini keyboard (one button per one character, like a PC keyboard).
I'm trying to implement a form with few text boxes. The goal is to let user type the message like they're using a PC keyboard (unlike in traditional phones, where you need to press the 'numpad two' button three times in order to type the character 'C')
I've successfully implemented this functionality. But it's an ugly implementation because I use a switch-cases for each and EVERY keycodes.
Forexample:
char inputChar;
switch(keyCode)
case 97: input = 'A' break;
case 98: input = 'B' break;
// go on until every keys are covered, including the lower case letters. T_T
buffer.append(inputChar);
Yes I know that my programming skill is real crap >_<, so I try google for some good implementation method. But I always found only the detail about the traditional numpad implementations.
Ok, my real question is, can this keyboard implementation be done in a better way? The code should be able to look more beautiful than this, right?
Thank you. =)

I still don't get the problem here?
A textbox in a form will work just fine with those mini keyboards. You don't need to do anything for it..
Otherwise, this code can obviously be done better, a simple array where you just lookup your keycode will be much simpler and faster for instance.

Problems with ViaVoice under Leopard, especially key mapping problems

ViaVoice's behavior has changed considerably under Leopard. First I will discuss the key mapping problem, since I'm eagerly looking for an answer to this problem. At the end of this post, I will voice some of the other problems I've experienced for those who may be interested. The key mapping problem may be specific to the fact that I use a foreign keyboard with a US version of ViaVoice.
INTRO:
I have used ViaVoice on my Mac for years, more or less without problems (ViaVoice's bugginess is notorious).
Those who know ViaVoice will know that one has two general options for dictation. One can dictate into ViaVoice's so-called SpeakPad, which allows special formatting, editing and dictation error correction within the dictated text, or one can dictate into "external" software such as Microsoft Word, in which case ViaVoice just sends a string of characters to that software. SpeakPad appears to make strong use of the operating system's built-in functionality for character formatting, document formatting, etc.
*MY PROBLEM*
I have a German keyboard on my PowerBook, yet dictate in US English. When I dictated into SpeakPad under Tiger, all characters appeared correctly. However, when I dictated into Microsoft Word using Tiger, I had to switch the keyboard mapping from German to US to get all characters (that means including the characters that are located at different positions on a German keyboard than they are on a US keyboard such as y, z, apostrophes and parentheses) to appear correctly.
Under Leopard, things have changed. Now it doesn't matter whether I dictate into SpeakPad or Word; the results are the same and many characters do not appear correctly.
If set to a German keyboard, y and z appear as expected. To name a few irregularities:
"(" appears as ")"
")" appears as "="
apostrophes appear as "#" and
";" appears as ","
If set to a US keyboard, y and z are interchanged. "(" and ")" appear as expected. Apostrophes appear as "\" and ";" appears as ","
By comparison, if typed (as opposed to dictated, as in the examples above) "correctly" (i.e. based on the letters printed on the keyboard) on a German keyboard set to imitate a US keyboard:
y and z are interchanged
apostrophes appear as "|"
"(" appears as "*"
")" appears as "(" and
";" appears as the symbol for "less than"
Since I don't have a US keyboard, I can't say how it would behave if set to imitate a German keyboard, i.e. if there's a correlation to the results I get when I dictate.
Since I was previously able to dictate correctly into SpeakPad by setting the keyboard to "German" and into Word by setting the keyboard to "US," I presume that this is a problem in Leopard, not ViaVoice.
*OTHER PROBLEMS WITH VIAVOICE UNDER LEOPARD*
In addition to the aforementioned key mapping problems (that may be specific to those of us with foreign keyboards), ViaVoice appears to have lost considerable functionality in Leopard. I cannot access SpeakPad's Preferences and the correction window. Moreover, the traffic-light like window buttons have disappeared from the VoiceCenter (although they work if you click where they should be). SetupAssistent appears to function.
I've written to Nuance about these problems, but have little hope that they will invest the time in producing a patch since they haven't released any updates since 2003.

Thrums1,
I've never had to "register" ViaVoice after updating the system. I thus suspect you haven't fully followed my above, three-step advice (particularly step 3).
1) Reinstall ViaVoice from CD.
2) Update to the latest version (using the patch downloadable from Nuance's website).
3) Replace the “temp” and “users” folders (in the "ViaVoice" folder at the upper level of your home directory) by a previous copy thereof. When I say previous copy, I mean a copy from when ViaVoice was still working properly, e.g. a copy from when it was running under Tiger.
As I said, I've gotten ViaVoice to survive several system updates by following the above steps. To my knowledge, the last step is critical since it saves you from having to reconfigure ViaVoice under the new operating system (in this case Leopard). I suspect that ViaVoice is crashing on your system because it's trying to start some module of the SetUpAssistant that is incompatible with Leopard (as many are). If you instead use old copies of the "temp" and "users" folders (from the previous system), then ViaVoice doesn't have to go through the initial "registration" process; ViaVoice doesn't need the SetUpAssistant; and all is (more or less) fine.
Good luck!
BTW, to my knowledge, Dictate only runs on Intel Macs. It thus won't run on a G4 iBook, just as it won't run on my PowerBook G4.

Problem with childs nodes and automatic key mapping in a Data Object

Hi experts!
I'm doing the service order tutorial from the mobile help at [this link|http://help.sap.com/saphelp_nwmobile71/helpdata/en/21/9b5b924c3b434fba4767731794b029/frameset.htm] and I have a problem...
In the topic "Modeling the Equipment Data Object", says you have to mark the "Automatic Key Mapping" checkbox. So when I had to create a third child node ( the location node ) the system raised an exception with the message "Deselect automatic key mapping flag for more than two-level nodes". I'm trying deselecting the flag and creating the location node, but when I want mark again the automatic key mapping flag, this is disabled.
What can I do to solve this and create the three child nodes with the flag marked? It's a configuration thing?
Any help it's very welcome. Thanks in advance.
Best regards,
Simon.

The thing is: Its not allowed to use automatic keymapping if you have more than two levels. This is why the message showed up, and this is why its been disabled.
What automatic keymapping does: Figures out automatically which child node belongs to which parent (by guessing from the field name and type, which fields in the child correspond to which key fields of the parent).
On three levels, this becomes more complicated => Its disabled.
How to do keymapping yourself instead of having the DOE do it automatically: Do 'Explicit keymapping' from each child to its parent. Explicit keymapping is done by clicking on the corresponding menu button in the child node. Here you need to associate child node fields (they need not be key fields of the child, but they are allowed to be that as well) to each of its parent nodes key fields (so that each child can be associated to its parent).
Cheers

Problem with key mapping in 10g

Hello,
my client is using key mapping on their reports server. It works fine except for parameter values...
I can run this URL:
http://<host>/reports/rwservlet?kr+2002+20
and there is a mapping for kr in the cgicmd.dat file like this:
kr: report=KR userid=<user>/<pw>@orcl desformat=html destype=cache p_verksamhetsar=%1
p_verksamhetsar is a parameter of the report (meaning year).
My problem is that when the report is run using the above URL the parameter gets the value 2002=
An equal sign is added! The year column is a varchar2 so the query works but gives no result.
I get the same problem if I try this URL:
http://<host>/reports/rwservlet?kr%262002%2620
If I run this URL it works fine (with a result as well):
http://<host>/reports/rwservlet?report=KR&userid=<user>/<pw>@orcl&desformat=html&destype=cache&p_verksamhetsar=2004
Any suggestions?
Kind regards
Tomas Albinsson

Hi Kranthi,
I think you mean %* at the end, meaning all parameters sent.
Yes, I use this approach now as I've been unable to get %1, %2 etc to work.
Strange, because %1 is described in the manual and I feel I use it like they say.
Well, it works in a way, just that = is appended to the values.
It has that buggy smell :)
Kind regards
Tomas

Key mapping with rwservlet

Hi,
I am working on running reports through the web using html forms and rwservlet. The trouble comes when I try to use cgicmd.dat to do key mapping. The utility "showmap," that is used with rwservlet, shows the file has changed, but under "Parsed map file entries," my new keys are not displayed. How can I get these new key entries to work?
Thanks
Sarah

Hello,
Here is an extract from Reports documentation:
Oracle9iAS Reports Services Publishing Reports to the Web
Release 2 (9.0.2)
Part Number A92102-01
3.3.2 Reloading the Key Map File
Use the RELOAD_KEYMAP parameter to specify whether the key map file
(cgicmd.dat) should be reloaded each time the servlet receives a request.
For example:
RELOAD_KEYMAP=yes
This is useful if you frequently make changes to the map file and want the
process of loading your changes to be automatic. Runtime performance will be
affected according to how long it takes to reload the file.
Typically, this parameter is set to no in a production environment and yes in
a testing environment.
Regards

Key Mapping with Oracle Reports

I am currently trying to run report requests using the Oracle Report Server however the problem that I have is that we need to send database username/password information over the network. From a security perspective this is not acceptable.
One way we were going to get around this is to "wrap" the Oracle Report servlet with another servlet, so the client browser sends the wrapper servlet information such as report location and report name, and the
wrapper servlet adds in additional information such as the username and
password, eliminating the need for the client application to know this information.
The problem is that the URL returned to the client when the report is generated contains the username/password, which again is not
acceptable. As I have seen mention that Oracle Reports can be run over the Internet,
I assume that there is a mechanism for hiding this information. Do you know how to achieve this?.
I am keen to just hard code the user name, password, and database connection into a key mapping file to resolve this security issue. However we are having trouble getting this method to work with the Oracle Report Servlet. We are using WebLogic Server to serve these servlets.

Hello,
Here is an extract from Reports documentation:
Oracle9iAS Reports Services Publishing Reports to the Web
Release 2 (9.0.2)
Part Number A92102-01
3.3.2 Reloading the Key Map File
Use the RELOAD_KEYMAP parameter to specify whether the key map file
(cgicmd.dat) should be reloaded each time the servlet receives a request.
For example:
RELOAD_KEYMAP=yes
This is useful if you frequently make changes to the map file and want the
process of loading your changes to be automatic. Runtime performance will be
affected according to how long it takes to reload the file.
Typically, this parameter is set to no in a production environment and yes in
a testing environment.
Regards

Hp t510 right alt key mapping not working with ctrl + s

Using the HP t510 to launch a xendesktop session via storefront. We have a mission critical application that uses the ctrl + alt + s hotkey to secure itself. The left alt key with ctrl + s is working as it should but the right alt key does not. When testing in the win7 on screen keyboard the right alt and ctrl stay lit up. When hitting the S key after depressing both the right alt + ctrl (right or left ctrl doesn't matter) the alt keys disappear from the on screen keyboard as if they were no longer pushed. They hotkey combination never makes it to the application and it does not secure itself.
I've tested this same workflow on an ASUS thin client, desktop, and laptop hardware with no issues. It does in fact seem to be some hotkey mapping the HP device has baked into it using the right alt key.
Has anyone seen any issues that even closely mimic this? I've seen some for ctrl + alt + del but their fixes don't work for this specific issue.

Hello xXenStatex,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that the alt key mapping is not working with ctrl + s on your Thin Client, and I would be happy to guide you towards a resolution!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at:
http://h30499.www3.hp.com/t5/Workstations-Thin-Clients/bd-p/bsc-635
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Strange problem with key map file 10.1.2

Here is the entry in cgicmd.dat when running showmap:
ssipdf: userid=user@conn destype=cache desformat=pdf report=%1 %*
Here is the URL:
http://localhost:8889/reports/rwservlet?ssipdf&refcritd.rdf&projectid=76
I'm getting this message when using a key map file to run reports:
REP-110: File 'refcritd.rdf=' not found.
REP-0110: Unable to open file 'refcritd.rdf='.
Where are these equal signs getting appended to the filename coming from??
I know the report exists and works, because if I manually enter all the params in the URL the report runs fine.
This was working in 9.0.4 and I copied the same cgicmd.dat file from that version.
Any ideas?

ssipdf: userid=user@conn destype=cache desformat=pdf %*
Try this .....!
There is a slight change in kepMap in Release 2

Key Mapping in Forms 10g

Dear All,
I have migrated forms 3.0 in unix to forms 10g in windows 2003 server.
In my older version, '+' key is mapped to do COMMIT. I want to map the same key in forms 10g. i tried the same in my frmweb.res. Pls find the mapping done by me below.
*107 : 0 : "Add" : 36 : "Commit"*
This works fine.
The Issue is ... My cursor is in a text item .... I entered some data and press " + " key to save. The data is saved but at the same time the data in the text item is erased and + is getting replaced in the text item. I dont want my data to be erased and replaced with "+" symbol.
How to map the "+" just for COMMIT and should not replace the data in the text item ?
Can anyone help me to solve this issue...
Thanks in Advance
Sharf

Unfortunately, sometimes the role of the developer is to educate the user/management what can/can't and should/shouldn't be done. If I were in your postition, I would make every effort to educate the user/management this this is a REALLY bad idea and encourage them to use the standard key mapping or use a modifed key mapping that uses just the F-Keys.
The problem you have to overcome is that you have to not only tell Forms to do something different when the '+' key is pressed, but you have to have a listener in your application that is listening for the '+' key and supress the '+' character. To my knowledge, this cannot be done with native Forms built-ins. You would have to write your own Java solution (JavaBean or Pluggable Java Component [PJC]) to suppress the '+'. I have found that if you can provide the user/management with a cost estimate associated with the effort needed to code a particular feature. Once they realize the level effort and more importantly the cost associated with coding a particular feature, they typically will change their mind and see reason.
I know this is not what you wanted to hear, but I hope it will help anyway. :(
Craig...
Edited by: CraigB on Aug 2, 2010 2:05 PM
Edited by: CraigB on Aug 2, 2010 2:07 PM

Can we map mutiple Account ID's with a single House Bank in OBVCU? (FI-TRM)

Hi,
I want to map mutiple account ID's with single house bank in OBVCU for the purpose of making Automatic Payment Transaction(F111) for my Treasury postings.
For eg:-
Bank Master-FI12
House Bank Acc ID      GL
BOB         BOB01         10251030
BOB         BOB02          23506010
BOB         BOB71          23506380
BOB         BOB72          23506390
These account IDu2019s are linked to Main Accounts.
Maintained Sub accounts, Issue & receipt in the GL Master with numbering convention as :
Issue Accounts ends with 1 & Receipt Accounts ends with 2
For eg:-For account ID BOB01
Issue A/c: 10251031
Receipt A/c: 10251032
Bank Determination -FBZP
Created Payment Methods I & O,Inflow & Outflow.
But, OBVCU, the fields in grey are House Bank,Payment Method & Currency.
In treasury module for clearing the payment request, I want to map the House Banks and Account ID's in following manner.
House Bank   Pay. Method Curr       Acc ID     Bank Sub A/c
BOB                   I               INR       BOB01     10251032
BOB              O               INR       BOB01     10251031
BOB               I               INR       BOB02     23506012
BOB              O               INR       BOB02     23506011
BOB               I               INR   BOB71     23506382
BOB              O               INR   BOB71     23506381
BOB                   I               INR   BOB72     23506392
BOB              O               INR   BOB72     23506391
But system allows me only to link a single Account ID to House Bank(BOB) and If I try to add BOB02, BOB71 and BOB72 with house bank BOB, the system will through an error message as " Target key should be different from Source key".
I could have masked the issue/receipt in treasury account determination as follows:-
Eg :- Account Symbol 3 : GL 1025103+
But,since all the other modules except Treasury has gone live ,it is not possible to change the numbering convention or account IDu2019s.
Kindly revert with the suggestions.
Thanks & Regards
Ramesh Nair

Hi Ramesh,
It is not the problem of linking different account ids to a single house bank, you had done assigning a payment method for a single currency to different account ids for the same house bank.
SAP doesnt allow this scenario
BOB I INR BOB01 10251032
BOB O INR BOB01 10251031
BOB I INR BOB02 23506012
BOB O INR BOB02 23506011
BOB I INR BOB71 23506382
BOB O INR BOB71 23506381
BOB I INR BOB72 23506392
BOB O INR BOB72 23506391
Here above you tried to assign payment method I with currency INR to different account ID's (BOB02 & BOB71) apart from BOB01 which SAP doesnt allow. You can assign a payment method with a currency to only one account id.
HOpe u understood.
Your criteria cant be met.
Regards
srikanth

Remote System and Remote Key Mapping at a glance

Hi,
I want to discuss the concept of Remote System and Remote Key Mapping.
Remote System is a logical system which is defined in MDM Console for a MDM Repository.
We can define key mapping enabled at each table level.
The key mapping is used to distinguish records at Data Manager after running the Data Import.
Now 1 record can have 1 remote system with two different keys but two different records cannot have same remote system with same remote key. So, Remote key is an unique identifier for record for any remote system for each individual records.
Now whenever we import data from a Remote System, the remote system and remote key are mapped for each individual records. Usually all records have different remote keys.
Now, when syndicating back the record with default remote key is updated in the remote system that is sent by xml file format.
If same record is updated two times from a same remote system, the remote key will be different and the record which is latest contains highest remote key.
Now, I have to look at Data Syndication and Remote key.
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back. But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
Regards
Kaushik Banerjee

You are right Kaushik,
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back.
Yes, but if they are duplicate, they needs to be merged.
But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
This is after merging. So whichever remote key has tick mark in key mapping option(default) , it will be syndicated back.
Pls refer to these links for better understanding.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/80eb6ea5-2a2f-2b10-f68e-bf735a45705f
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/7051c376-f939-2b10-7da1-c4f8f9eecc8c%0c
Hope this helps,
+ An

Key mapping

Hi All,
I have 3 fields in my source file Id,Category (Key Mapping) ,Name.
In Import Manager
I have mapped Remote Key field with ID .
Name with Name
category with Category Qualified Range (A 1-10)
I have source file like this
Id name category
11 10 A
In syndicator i have one more field Material Number .Mapped this with Material Number (should Get generated material Number )
Name with Name
Category with Category
Remote Key value with Material Number
After syndication I am getting Id values in Material Number .(Instead of 1 I am getting 11)
Can any one let me know the solution?

Got It . Should not Map Id field with the Remote key in Import Manager.

Key Mapping activates Versus Import Manager

Hello,
I have Key mapping activated in the console and Supress Unchaged Records activated in my syndication map.
Case : I import files (suppliers catalogs) to MDM via Import Manager manually. I am not sure about it, but since I activated Key mapping property,
I noticed that for each supplier ID in the Supplier table, a lot of remote keys were created. Previously I only had one remote key for each supplier and now I have a list of other supplier's ID. ( Existent or nonexistent supplier IDs). This becomes an issue for my import, because when I try to import a file where the supplier id does not exist in the MDM ( this scenario used to block my import and this is what a expect, as supplier is a key in my mapping), the system automatically maps that nonexistent supplier to other supplier.
Can you help me to understand if this is caused for the key mapping property ? Any Idea ?
Thank you very much
Luciana.

Hello Stanley,
The remote keys are form the same remote system.
My story is : When I am importing a file , suppose my file has an invalid supplier ID. ( this means this supplier is not in the lookup table Suppliers)
1)The import manager will give me a message such as : Map Supplier ID Values. This behavior was expected.
2)I decided to test the automap. The invalid supplier was not mapped to a different value. I am ok with that.
3)If the user ( dont ask me the reason ;-)) decides to map that invalid supplier ID to a different one, he/she is allowed to do so. I remember when the key mapping was not activated this option did not exist. The map and automap button was deactivated.
What I am trying to make sure is : a remote key will be created for invalid suppliers ONLY if I choose to map it with a different supplier ID.
Do you have any comments about it ?
Thank you very much
Luciana.

Key mapping on Symbol MC 9000 with Websapconsole

Similar Messages

Maybe you are looking for