Keyboard not responding after installing Leopard Server

I just upgraded on of our old 10.4 Servers to 10.5 and when it boots up the initial setup screen where you pick the language and enter the serial number, the keyboard doesn't respond.  I tried different keyboards, resetting PRAM, single user mode with disk repair and nothing seems to work.  Any ideas on why this is happening and how to fix it would be appreciated.

Reset SMC.     http://support.apple.com/kb/HT3964
Choose the appropriate method.
"Resetting SMC on portables with a battery you should not remove on your own".

Similar Messages

  • Trackpad+keyboard not responding after installing drivers from Leopard DVD

    I've just installed the Windows XP (SP2) drivers from my Mac OS X DVD (10.5.2), just sitting and watching as it progressed. When the final notice appears, saying that I am to press "finish" to exit the setup, I discover that the trackpad is unresponsive and so is the keyboard (I have a 15" MacBook Pro). I tried pressing the "shut off" button on my MBP and it turned off immediately. After starting up again I tried to connect a mouse using both USB-ports with no results.
    I.e., there's no response from either USB port, nothing from the trackpad and nothing from the keyboard. Please help

    Yes same here. Installed new trackpad driver on 18th Dec and the trackpad has had HUGE issues - unresponsive after resuming from hibernation in Vista. Takes about 5-10 minutes to sort itself out. Horrendous!!

  • Firefox Not Responding after Installing Microsoft Office 10

    After installing Microsoft Office 10 (student and home edition) on my laptop, I noticed that Firefox is going into the state 'Not Responding' every time I access it - it takes about 10 secs to 'think' and then comes back online. It continues to do this every time I want to access a new page, new link, click on mail in Yahoo Mail, etc. Has anyone experienced this issue?

    1) Check the $IAS_ORACLE_HOME/Apache/JServ/etc/logs/jvm
    has servral logs for OACoreGroup Servlets that are initialied
    2) You might have to enable the debug option in jserv.properties and jserv.conf
    (find IsItWorking.java in Metalink for the appropriate note )
    3) If this is 403 forbidden then check trusted.conf alongside httpd.conf
    pls keep posted about how this issue got resolved.
    Sunil
    JSP not responding after installing 11.5.10.2 on IBM
    HACMP
    i have finished installing Oracle applications
    11.5.10.2 on IBM clusters (HACMP version 5.1)its a
    multinode setup with mutual failover. other
    applications are working fine. the installation went
    well. but the final part on the middle tier , during
    the post install checks it says JSP not responding. I
    checked the apache error-log and saw the follwoing
    entry
    [Sun Apr 23 21:04:21 2006] [error] [client
    172.29.200.74] client denied by server configuration:
    /appl/oracle/devcomn/portal/
    DEV_erpappssrv/oprocmgr-service
    >
    that bafles me because that ip address was not used
    in the installation. its the persistent ip address of
    the HACMP. the service ip that was used in the
    configuration file was 172.29.200.75
    however there is no mention of this in the error
    log.i also edited the oprocmgr.conf in the
    Apache/conf directory after which i dont get the
    error however the servlets pages then hangs and
    returns page cannot be displayed error on internet
    explorer. no error is registered on the error log.
    the jdk am using is 1.4.2 which is the recommended
    one.
    what this means is that i cannot access the self
    service pages and as you know you need self service
    pages to access the application in 11.5.10.2
    i opened a TAR with oracle on 8th April 2006 and till
    today i have not been able to get a solution.
    I am hoping that i will get someone in this forum who
    has met a similar problem or who has an insight into
    how we can solve this problem already am weeks past
    the target go live!!!
    Please Kindly help
    Jeremiah Ochieng

  • "Import Mailbox" not available after installing Leopard - no email

    The first time I opened Mail after installing Leopard. It found my accounts and folders but nothing was in them. Everything I've read says to "Import Mailboxes" from the Library, however that option isn't available to me. (it is in shadow). Should I re-install Leopard? Is there a way to re-install just the "mail" rather than the whole operating system?

    Restarting the MBPr a second time after the update resolved the issue for me. I was updating from 10.10.2.
    Prior to resolving this, the symptoms I experienced were a loss of the Bluetooth icon in System Preferences, and no option to search for Bluetooth devices in both the Mouse and Keyboard menus. The Bluetooth icon in the top menu bar also had a squiggly line going through it, and when clicked reported Bluetooth not available.

  • RDL Reports are not working after installing SQL Server 2012 Service Pack 2 in the SharePoint integration Mode

    I am using Reporting Service Integration mode with SharePoint. SSRS is installed on separated machine of SharePoint stacks in Integration Mode. Everything was working properly and I could create/edit/modify RDL reports(parameters, Datasource, Subscription)
    inside SharePoint and Document Libraries.
    But after installing SQL Server 2012 Service Pack 2, on opening RDL reports inside SharePoint I receive this error message. 
    The permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation
    I should mention that SSRS is installed in the SharePoint integration Mode and there is no SSRS management console.

    Hi Hedayat-Abedijoo,
    According to your description, you are using Reporting Services in SharePoint Integrated mode, and everything worked fine before you install SQL Server 2012 Service Pack 2. After the package is installed, when you open RDL reports, the error occurred: The
    permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation.
    According to my search, there may be two reasons for the problem:
    This is caused when the application pool account that runs the SharePoint Web application you are on in IIS and the application pool account that SharePoint believes is running the site differ. This happens if the application pool account is changed directly
    in IIS instead of through SharePoint (using the approved method).
    This error can be caused when Kerberos authentication has been set up correctly and delegation in a double hop scenario will succeed, but Reporting Services integration has been set up for Trusted Account rather than Windows Authentication. This causes
    SharePoint to continue to impersonate the logged-on user when contacting Reporting Services; when Reporting Services compares the application pool account to the user account making the request, they are not equal.
    In this case, we can solve the problem by changing the application pool account in IIS back to the previous account and set AuthenticationTypes to RSWindowsNTLM only. For detail information, please refer to 8.3 “The permissions granted to user 'Domain\User'
    are insufficient for performing this operation” in the document:http://msdn.microsoft.com/en-us/library/ee384252(SQL.100).aspx
    If you have any questions, please feel free to let me know.
    Thanks,
    Wendy Fu

  • Finder not working after installing Leopard!!!

    Hi everyone.
    I'm getting a strange Finder behavior on my Intel iMac (not the newest version) after installing Leopard. The thing is, after instalation, when I start the computer, the top bar on the screen starts blinking, and there's no way to open a Finder window. And it stays like that forever! I tried to open Finder from the Dock, but the blue dot of the active programs blinks 3 or 4 times and then disapears. Plus, the only way to access the Apple logo on the corner to switch the computer off or restart it, is by opening one other program from the dock (in this case I have Safari running), because this way the top bar stops blinking.
    So, I thought I should try to update Leopard to 10.5.1, and this could solve the problem. But no. It searches for new software updates, tells me that there are new updates, but I cannot see them nor install them!
    This is really weird and annoying!
    Anyone had this problem? Please, help me.
    P.S.: Yes, I've tryed a second install of Leopard. Same thing!

    anamorphis wrote:
    Hi everyone.
    I'm getting a strange Finder behavior on my Intel iMac (not the newest version) after installing Leopard. The thing is, after instalation, when I start the computer, the top bar on the screen starts blinking, and there's no way to open a Finder window. And it stays like that forever! I tried to open Finder from the Dock, but the blue dot of the active programs blinks 3 or 4 times and then disapears. Plus, the only way to access the Apple logo on the corner to switch the computer off or restart it, is by opening one other program from the dock (in this case I have Safari running), because this way the top bar stops blinking.
    So, I thought I should try to update Leopard to 10.5.1, and this could solve the problem. But no. It searches for new software updates, tells me that there are new updates, but I cannot see them nor install them!
    This is really weird and annoying!
    Anyone had this problem? Please, help me.
    P.S.: Yes, I've tryed a second install of Leopard. Same thing!
    Do NOT install any updates until you resolve the problem, which is unrelated to any updates. Updating a computer that is not working correctly will only make the problems worse, never better.
    If this is the second install, was it on an erased HD or did you import your previous programs, etc?
    It sounds like you might have some errant 3rd party software running.
    Did you run a disk check and file permission verify/repair before installing?
    Check your startup program window and remove everything there. Write them down so you can put them back later.

  • Storage Provider not responding after installing SCVMM 2012 R2 UR5

    After installing UR5 registered storage providers show Not Responding. I had two registered, both scale out fileservers in the same domain as VMM  that were working fine before UR5. Sofs running 2012R2 with latest patches
    Trying to refresh provider:
    Error (26101)
    Storage discovery of provider {0869e333-12f6-44c7-b6b7-7139530a18c9} for user hyper-v\<user> failed from VMM01.hyper-v.blaa.com with error code 46010. 
    Recommended Action
    Specify valid provider, port and user credentials for storage discovery.
    The other one I deleted to recreate it. The deletion yielded:
    Error (26312)
    Unregistering the storage subsystem with unique ID {bca715fb-ce94-47f5-9558-f8e862c3e7dc}:SS failed from VMM01.hyper-v.blaa.com with error code 46005 [SM_RC_SUBSYSTEM_NOT_REGISTERED].
    However the storage provider was removed and now if I run Get-SCStorageProvider i can't see it. When I try to add it back I get an error :-(
    Error (26311)
    Registration of the storage subsystem ss02.hyper-v.blaa.com for user hyper-v\<user> failed from VMM01.hyper-v.blaa.com with error code 4 [SM_RC_GENERIC_FAILURE].
    Not sure what's happening but looking at the roleholder in the storage cluster I have an error in the VMI-Activity log:
    Log Name:      Microsoft-Windows-WMI-Activity/Operational
    Source:        Microsoft-Windows-WMI-Activity
    Date:          2015-02-23 00:11:52
    Event ID:      5858
    Task Category: None
    Level:         Error
    Keywords:      
    User:          SYSTEM
    Computer:      xxx
    Description:
    Id = {99940B20-4D23-0003-FC56-D599234DD001}; ClientMachine = SS02-1; User = HYPER-V\xxx; ClientProcessId = 332; Component = Unknown; Operation = Start IWbemServices::GetObject - root\Microsoft\Windows\Storage\Providers_v2 : SPACES_StorageProvider.ObjectId="{0869e333-12f6-44c7-b6b7-7139530a18c9}";
    ResultCode = 0x80041001; PossibleCause = Unknown
    And a Security error:
    Log Name:      Security
    Source:        Microsoft-Windows-Security-Auditing
    Date:          2015-02-23 00:11:52
    Event ID:      4656
    Task Category: Other Object Access Events
    Level:         Information
    Keywords:      Audit Failure
    User:          N/A
    Computer:      ss02-1.
    Description:
    A handle to an object was requested.
    Subject:
    Security ID:
    HYPER-V\xxx
    Account Name:
    xxx
    Account Domain:
    HYPER-V
    Logon ID:
    0x117FC549
    Object:
    Object Server:
    WS-Management Listener
    Object Type:
    Unknown
    Object Name:
    Unknown
    Handle ID:
    0x0
    Resource Attributes:
    Process Information:
    Process ID:
    0x14c
    Process Name:
    C:\Windows\System32\svchost.exe
    Access Request Information:
    Transaction ID:
    {00000000-0000-0000-0000-000000000000}
    Accesses:
    MAX_ALLOWED
    Access Reasons:
    Access Mask:
    0x2000000
    Privileges Used for Access Check:
    Restricted SID Count:
    0

    UPDATE:
    Managed to get a window to reboot the storage cluster with the incomplete delete. After rebooting the registration of the storage provider completed and is now ok. Will try to reboot the other storage cluster as well.

  • Keyboard not responding while installing Windows XP sevice pack 2

    Hi,
    I am new to macworld, Just got Macbook and try to use bootcamp to install windows xp, but keyboard did not respond hence got stuck at this point. Please help me. how to make keyboard working while installing windows xp using bootcamp. I know that for non-portable Mac USB mouse and keyboard can be used but whats need to be done for portable Mac like Macbook

    I have been scouring the internet on my limited dial-up connection trying to find someone who had a definitive solution to this problem which I too have been stuck with.
    What finally resolved this keyboard problem during that critical stage in the win xp setup was by:
    1. Going to System Preferences>Keyboard and Mouse and check-marking "USE ALL F1, F2 ETC. KEYS AS STANDARD FUNCTION KEYS (when this option is selected, press the Fn key to use the special features printed on each key)" Before starting up Boot Camp,
    2. and Unplugging the Mighty Mouse from the keyboard while my mac was rebooting.
    Switching out the apple keyboard for a standard USB keyboard did not work (perhaps in hindsight, i should have plugged it in first before boot camp rebooted and tried to install win xp;)
    Attempting time after time again did not solve the issue;
    Neither did doing all the software updates, firmware updates and such while borrowing an ethernet cable connection from my local library;
    I did not need to find another Win XP with SP2 nor did I need to find a USB keyboard;
    Not even updating my Mac OS X from 10.5.2 to 10.5.5 or installing the new firmwares for the Apple aluminium keyboard was necessary it seems.
    Just a simple checkmark to make the apple keyboard's F-keys primary and unplugging the Mouse from the keyboard before the WinXP install kicked in, allowed me to press Enter to proceed with the installation.
    I also turned off the special functions of the mighty mouse like the center click and roll ball, but I felt obligated to post the solution to this problem - Do as you would be done by.
    Hope this helps others who encounter this same problem, please confirm if I am correct. Good luck.

  • Hard drive not recognized AFTER installing leopard

    So I installed Leopard on my 12in Powerbook G4, having the usual problem of non-recognition of my hard drive (from a third party) but was able to install Leopard after fiddling with disk utility.
    Now the computer will not recognize the hard drive after I restarted it. I've tried rebooting holding down the option key and selecting the hard drive and it still didn't recognize after restarting (it shows a prohibit sign). Also tried booting in single-user mode but it keeps waiting for the root device forever.
    Has anybody had a similar problem?

    Unplugging worked!!!
    I have no idea what PRAM is but someone said that unplugging your computer resets it so, I thought I'd give unplugging a shot. So, I shut down my computer and unplugged it. I also unplugged the power on the HD. (because I wasn't sure which one they were talking about.)
    Anyway, I went away for about five minutes.
    I came back plugged in the HD power first. Then, I plugged in the power cord for the computer and turned it on.
    As soon as I logged in I was asked if I wanted to use my external HD for Time Machine backups.
    I saw the icon for the HD on the Desktop where is belongs. I can open the drive and access the files with no problem.
    Try this if you haven't yet.

  • Keyboard not responding after OSX 10.7.4 update

    I have just installed the OSX 10.7.4 update.
    About 12 hours after installation the screen dimmed with a message that I need to restart the computer. I did so and now after startup I get a message on the screen that the Bluetooth keyboard can't be found. I actually have a hard wired keyboard, not a Bluetooth one, but there is no response to keys on the keyboard and I can't get rid of the screen message, even after a restart.
    So I can't start in safe mode or anything like that because the keyboard doesn't work. Any ideas on how to get around this?

    Thanks for the suggestions, but the keyboard was connected to a built-in port.
    When I came back to the computer about an hour after the problem appeared, the bluetooth message had gone and the normal keyboard was working again, so I could log in. I checked Bluetooth in System Preferences and found there was a "phantom" wireless keyboard listed, that I had never installed. I removed that from the list so hopefully the problem won't re-occur.
    Not sure whether this problem was related to the update, but from other posts, it appears to have caused a number of issues.

  • SAP B1 always not responding after install in Windows 7

    Dear All experts,
    I have one client machine after change to Windows 7, the client SAP B1 always show not responding or seems like "freeze", cannot do any thing while user only open some marketing document. But the othes application like Ms Office or others than SAP B1 still can be respone.User have to end process the SAP B1. Sometimes it will create the dump file. Only user's machine with Windows 7 will happen this, others like Windows XP does not facing this problem.
    This issue happen since user change to new machine with Windows 7. Previously, user is using Window XP and does not happen this issue. The current version is SAP B1 2007A SP01 PL 7. The work around we have done is check the FMS, addon, and reformat the machine to reinstall Windows 7, turn off UAC setting. Please advise.
    Thanks & Regards
    Angie

    Hi,
    What windows 7 edition are you using and is it one of this following :
    - Professional, Enterprise & Ultimate
      Edition
    if yes, it is okay that you have done the work around. I suggest to consider the sql native client (sqlnc) installation. Use the correct version of sqlnc. you use 2008 version for SQL 2008 and 2005 version for SQL 2005. Also, check if you have installed  .net framework 1.1 or 2.0.
    What about the PC hardware and software spec. are you using B1 system requirement guidance ?
    Many causes that make slow performance in B1 especially when you are using B1 2007A SP01 PL07. I said that because it is the previous PL that approved by SAP to use in win 7. So, try to upgrade to latest PL i.e. PL11. See if the problem still persists. Let's know if persists.
    JimM

  • Syncing my iCal calendars in iTunes - Not working after installing Leopard

    * I have tried researching this as much as possible before posting this, so I apologize if a solution has already been posted for this issue!
    After recently installing Leopard, I have noticed that when I try to sync my iCal calendars to my (5th generation) iPod (using iTunes) that the only calendars showing up as available to sync with are "Home" and "Work". I do not have a "home" or "work" calendar in my iCal. In fact all of my calendars in iCal appear to be working fine, however, I am unable to see any of them when I go to my iTunes to sync them to my iPod. I tried syncing my iPod with the "Home" and "work" calendars, but they are empty. I used to be able to sync with no problem whatsoever. Anyone have any ideas? Thanks a lot for any helpful advise!

    JHeinz,
    Glad to hear that contacts are working again.
    Other troubleshooting steps involve refreshing the iTunes and iCal plist files.
    1. Quit iTunes and find the com.apple.iTunes.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder. Drag the file to your Desktop, log out/in or restart and check iTunes for expected behavior.
    2. Quit iCal and find the com.apple.iCal.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder. Additionally find the Calendar Cache file in your Macintosh HD/Users/yourusername/Library/Calendars folder. Drag both of these files to your Desktop, log out/in or restart and check for desired behavior.
    I listed these as separate steps to keep from changing too many things at one time. If you are dissatisfied with the results you can always return the original plist files to their original locations.
    ;~)

  • JSP is not responding after Installing oracle Apps 11i

    Hi,
    I installed Oracle Applications successfully on my PC with Windows XP OS.
    I used expess installation for the VIS database.
    After installation all Post Install checks passed except for "JSP is not responding"
    checking URL = http://kanaan.mydomain:8003/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=E:\oracle\visappl\fnd\11.5.0\secure\VIS_kanaan\vis.dbc
    JSP is not responding, waiting 15 seconds and retesting.
    Anyhow if I log to http://kanaan.mydomain:8003 I am being directed to a page showing :
    "Oracle Applications Rapid Install Portal"
    Kindly advise how to check what is wrong with JSP and how to fix.
    Thanks in advance
    AK

    Hi,
    All services are starting properly with no errors
    when opening the page "http://kanaan.mydomain:8003/oa_servlets/AppsLogin"
    , i recieve the error :
    The webpage cannot be found
    HTTP 404
    Most likely causes:
    There might be a typing error in the address.
    If you clicked on a link, it may be out of date.
    What you can try:
    Retype the address.
    Go back to the previous page.
    Go to kanaan.mydomain:8003 and look for the information you want.
    More information
    Apache is running in process manager.
    In apache log file the last few lines are :
    [Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=DiscoGroup, it's possible that your configuration file is not correct.
    [Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=OACoreGroup, it's possible that your configuration file is not correct.
    [Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=XmlSvcsGrp, it's possible that your configuration file is not correct.
    [Wed Feb 28 10:27:08 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 10:27:08 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
    [Wed Feb 28 10:27:17 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 10:27:17 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
    [Wed Feb 28 10:27:27 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 10:27:27 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
    [Wed Feb 28 10:27:43 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 10:27:43 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
    [Wed Feb 28 10:27:48 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 10:27:48 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
    [Wed Feb 28 11:54:28 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 11:54:28 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
    [Wed Feb 28 12:12:21 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 12:12:21 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
    [Wed Feb 28 12:13:56 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 12:13:56 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
    [Wed Feb 28 12:13:59 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 12:13:59 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
    [Wed Feb 28 13:57:23 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 13:57:23 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
    [Wed Feb 28 15:35:40 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 15:35:40 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
    When running the command "ps -ef | grep -i apache":
    C:\Documents and ettings\Administrator>E:\oracle\visora\iAS\Apache\Apache\bin
    'E:\oracle\visora\iAS\Apache\Apache\bin' is not recognized as an internal or ext
    ernal command,
    operable program or batch file.
    Also apache is running in the processes.
    Kindly advise and thanks for your help

  • Illustrator CS4 application not responding after install

    Anyone knows how to slove this problem? I got the creative suite CS4 today and after installed dreamweaver, photoshop, acrobat reader works fine and fast except illustrator. When I opened the application and click on open a file or create a file, the application will show "Not Responding".
    Anyone know how to solve it? I am using vista

    Wade,
    You said that Adobe's employees come and visit this forum. And you are right, Adobe's employees disguised as a regular users are here all the time.
    When the CEO said Adobe hired Low Level employees I did not know then what he meant. Now I know is for damage control.
    I am not only one as you can only wish. Go to Adobe Feedback forum: http://forums.adobe.com/community/general/adobedotcom_feedback
    Afraid of the wolves?
    Can count higher than 1000.
    But you have not answer the question. Where is the CS4 update?

  • Program not Responding after installing PSE8

    I recently upgraded to PSE8.
    Since then I have noticed that when I go to shutdown my system (XP w/ SP3) I get
    a window indicating a program is not responding. The title of the window is
    'End Program - 9c0'. The '9c0' part is not always the same.
    Last night it was 960. I've checked before the shutdown to see if there is any application
    or process with a number like that and I have never found one.
    I believe I keep my system free of viruses, etc. but I did do a complete virus scan
    with Avast as well as Symantec. Plus spyware checks by AdAware and SpyBot.
    I'm wondering if anyone else has noticed anything like this?

    I have the same problem.  I'm running XP SP/3, and after I installed PhotoShopElements my machine hangs at shutdown until I kill a running process.  The problem goes away if I stop ElementsOrganizerSynchAgent.exe.  So for now, my solution is to set the service to start manually.
    Any chance of getting a fix?  The program I assume performs a needed function, and I'm now without it.
    Alan Stone

Maybe you are looking for