Keyboard support in DC based page

Is there a way to get keyboard event for WebDynPro DC components based page?
I want to react not only to mouse clicks, but to keyboard too.
thanks in advance.
my Portal is 7.0

Hi
No, There is few keyborad supports are available in CE, and that is in some UI only .
Best Regards
Satish Kumar

Similar Messages

Problem inserting FLV into template based page DW8

Error when inserting an FLV into a template based page.
The error is: "Making this change would require changing code
that is locked by a template or translator. The change will be
discarded."
I thought perhaps something was wrong with my code so I
created a new page in DW8, with one word of text. Saved the new
page as a template with the one word of text made into an editable
region. Created a page based on that template and attempted to
insert a FLV file into the editable region (using Insert > Media
> Flash Video). I still get the error message. I've attached the
code for this page.
I also get the error message when I go through the tutorial
Presenting
Video with the Flash Video Component in Dreamweaver 8. Using
the files provided in the tutorial.
Is the only workaround for this the one I found here?:
http://med.stanford.edu/irt/web/references/flash_video_installation.html.
Steps are under heading "Workaround for Locked Code insert error"
near bottom of page.
Any help is appreciated.
Jen

> Is the only workaround for this the one I found here?:
>
http://med.stanford.edu/irt/web/references/flash_video_installation.html.
> Steps
> are under heading "Workaround for Locked Code insert
error" near bottom
> of
> page.
This workaround *will* work....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"kilmeny21" <[email protected]> wrote in
message
news:[email protected]...
> Error when inserting an FLV into a template based page.
>
> The error is: "Making this change would require changing
code that is
> locked
> by a template or translator. The change will be
discarded."
>
> I thought perhaps something was wrong with my code so I
created a new page
> in
> DW8, with one word of text. Saved the new page as a
template with the one
> word
> of text made into an editable region. Created a page
based on that
> template and
> attempted to insert a FLV file into the editable region
(using Insert >
> Media >
> Flash Video). I still get the error message. I've
attached the code for
> this
> page.
>
> I also get the error message when I go through the
tutorial
>
http://www.adobe.com/devnet/flash/articles/flv_tutorial.html.
Using the
> files
> provided in the tutorial.
>
> Is the only workaround for this the one I found here?:
>
http://med.stanford.edu/irt/web/references/flash_video_installation.html.
> Steps
> are under heading "Workaround for Locked Code insert
error" near bottom
> of
> page.
>
> Any help is appreciated.
> Jen
>
>
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> 
> <title>Untitled Document</title>
> 
> 
> </head>
>
> <body>
> Text
> </body>
> </html>
>

Please do me provide with software which can support flipping and sreaming page on 27" iMac touch screen display

Please do me provide with software which can support flipping and sreaming page on 27" iMac touch screen display

IakovM,
See below for a few links.
You should ask the people at Troll Touch if the have a software to create a user interface.
Usually, the maker will provide programmers with the programming codes and a interface guide line on how to program the different gestures.
I know that PQLabs as a SDK for their touch screens.
With the programming codes in hand, any good Flash or HTML 5 programmer can setup a web site that will take advantage of the touch screen.
One thing I can tell you is that with touch screens based web sites, when it comes to links or buttons to push,everything needs to be bigger than on a standard web site. People will be using their fingers to do the clicking.
A finger is a much bigger pointer than a mouse pointer!
So links or buttons that are too small or to close to screen edges will be hard to click.
You can look at these for possible solutions:
TUIO is an open framework that defines a common protocol and API for tangible multitouch surfaces.
http://www.tuio.org/
http://kivy.org/#home
http://www.touchuserinterface.com/2009/06/multi-touch-programming-for-python-and .html

The keyboard shotcut to top of page was Control+home and to bottom was control+end. Now I am running Windows 8.1 neither works. Is there a keyboard shortcut?

Untii now the keyboard shortcut to top of page was control+home and to end was control+end. Now I am running Windows 8.1 and Firefox Beta neither of these work. Neither does control++ or control+0. (They did not work before I upgraded Firefox while I was using W8.1). Is there any keyboard shortcut to get immediately to top and to end?

Home and End without the Ctrl key should be sufficient to go to the top and bottom of a page.<br />
You only need the Ctrl key if you are in a text area.
Do you otherwise have problems with scrolling a page?
Does the Ctrl key work otherwise?
Did you try a new profile?
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Start XML Publisher from a html based page.

Hi.
We have users that only have access to the html based pages in EBS.
I wonder if I somehow can make it possible for them to start a xml publisher report request with parameters, from those html based pages.
In the form based pages this is not a problem, just add the concurrent program to a request group. But there must be someway to do this from the html based pages as well.
Is there a Role that can be assigned or something?
Regards
Daniel

HI i have used the following code, but what should the class be?
code=AppletClassName.class Because, i have 10 files that are packaged as a jar file. shouldi put all the .class names in here?
<html>
<head></head>
<body>
<applet code=AppletClassName.class
archive="offwaltz.jar"
width=600 height=600>
</applet>
</body>
</html>

My keyboard is not working in "Pages" but works with all other applications. Please provide resolution advice.

My keyboard is not working in "Pages" but works with all other applications. Please provide resolution advice.

What version of Pages?
There are one or two of us here who are not intimately acquainted with your particular set-up.
Peter

When Pages will support portrait and landscape page orientation in the same document?

When Pages will finnaly support portrait and landscape page orientation in the same document?

Only Apple would know, and it isn't telling.
Peter

Portuguese Keyboard Support on iOS

About keyboard support, I have 2 iPads (generation 1 and 2) and I still am unable to use it daily for work because of the lack of language support on the keyboard layout. That standard keyboard on iOS is fine for messaging but not for any article writing, since you need to have full character support.
Recently, on advice from a friend I bought the EasyKEYKeyboard app from the iTunes Store and it shows that a pratical full language keyboard is possible on a touch screen device such as the iPad. Unfortunately the app is a word processor on its own and does not bring that keyboard to the rest of the system. As a word processor is buggy and unreliable (no Save and it crashes, making you loose everything you wrote... Scary, never used it again).
Why doesn't Apple understand that iPad will only be used worldwide for serious work unless you bring full language keyboard support?
I can believe that millions of non-english users will feel the same...

SilvaLazarus wrote:
That standard keyboard on iOS is fine for messaging but not for any article writing, since you need to have full character support.
You seem to be unaware of the standard iOS system for creating accented characters. It is to hold down the key for the base letter and then to select from the popup menu that appears the version that you want. You do not even need to activate the Portuguese keyboard for this, English will work fine. But the Portuguese keyboard will give you Portuguese spellcheck and autocorrect.
The iPad has been enormously successful worldwide with a huge volume of sales, and a large number of languages supported in the OS interface, the keyboard, and the autocorrect system, which you can see listed in the tech specs.
http://www.apple.com/ipad/specs/
If you find the screen keyboard too cumbersome for serious work, you can use a bluetooth hardware keyboard.

Technical Details: The website does not support encryption for the page you are viewing. Information sent over the internet withour encryption can be seen by other people while it is in transit

Technical Details:
The website does not support encryption for the page you are viewing.
Information sent over the internet withour encryption can be seen by other people while it is in transit
== This happened ==
Not sure how often
== started few days ago. previously never happened before.

I was loading a website, it then stated as below, it wasnt any of the problems stated below.
SERVER NOT FOUND
# Check the address for typing errors such as
ww.example.com instead of
www.example.com
# If you are unable to load any pages, check your computer's network
connection.
# If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
Thus i checked the Page Info, it states that:
Security Info on page:
'''This website does not supply ownership information.
Connection not Encrypted.'''
Technical Details:
The website does not support encryption for the page you are viewing.
Information sent over the internet withour encryption can be seen by other people while it is in transit

Cannot Access Routers Web Based Page?

I have a wireless Linksys router Model WRT54G and it will not let me access my routers web based page. When I enter the default IP address into the Address Bar nothing happens (I've checked to make sure my router is on the default IP), i just get a blank screen, no pop-up or anything. Help?

Note that the router's "web pages" are built into the router. You do not need to be connected to the Internet to see them.
To view the router's web pages:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Check to see if your "modem-router" is using the same 192.168.1.x address space as your Linksys router. If it is, then report back with this problem, and also state the make and model of your modem-router.
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

Bootcamp and Apple Keyboard Support

Hi,
Been looking on the internet but have had no luck!
When using a Macbook Pro in Windows XP, I am having trouble getting inverted commas, speech marks, whatever you call them, basically this below
The comma below is fine, when you shift however to use these inverted commas, Apple's keyboard support provides this
¨
which isn't very useful when writing VB code. Was wondering if anyone knew any possible solutions? Every other button and when shifting provides the right charactor. At the moment Im having to copy and paste them which is most frustrating as I have to copy and paste other stuff all the time too.
Thanks

Try the bootcamp forum:
http://discussions.apple.com/forum.jspa?forumID=1165

TS3274 My keyboard moved to middle of page and is split. How do I get it back to bottom of screen?

My keyboard moved to middle of page and is split. How do I get it back to bottom of page?

Press and hold the 'keyboard' key at the bottom right of the keyboard and then select Dock and Merge from the popup.
If the keyboard becomes split at the bottom of the screen, or if you want to join it when it's undocked, then you can join the two halves together by using a finger on each half to drag them together (similarly you can then use two fingers to re-split the keyboard). If you don't want the option of a split keyboard then you can turn it off via Settings > General > Keyboard > Split Keyboard 'off'

Can HTML based pages be auditable in Oracle Apps R12?

Hi
I would like to know whether HTML based pages be auditable in Oracle Apps R12? LIke who has accessed OAM>sitemap>monitoring>current activity>user monitoring etc.
Regards

Hi,
Please see these documents.
For 11i:
Note: 557730.1 - Web Apps Not Updating Last Login Date In Fnd_Login_Responsibilities
Note: 278881.1 - Page Access Tracking in Oracle Applications 11i
For R12:
Note: 402116.1 - Page Access Tracking in Oracle Applications Release 12
Thanks,
Hussein

How can the DFF created for a PO form be used in PO web based page.

Hello,
I have created a DFF on the PO form using the attribute2 of the PO_HEADERS table. How can I create a DFF on the web page based 'buyer work center' page. My final goal is to use DFF for both the web based pages and forms.
Thanks for your help
Raj

hello Pradeep,
Whats the difference b/w DFF and custom DFF ?
I'll tell the steps what I did.
1. Application Developer > Flex Field > Descriptive > Register
Registered a DFF for PO_HEADERS_ALL table and used Attribute2.
2. Application Developer > Flex Field > Descriptive > Segments
So I used the DFF in the PO form. I want to see a DFF in the PO page also when the below navigation is used.
Purchasing: >Buyer Work Center>Orders. Opens a PO page.
Thanks for the help.
Raj

Keyboard support for AR 9.4.1 in ubuntu

I'm running adobe reader 9.4.1 in my ubuntu desktop. I would like to make annotation on pdf files by highlighting texts in different colors. Of course I can achieve this by several clicks, but I prefer to do that more efficiently. I explored a software called Autokey which can simulate pre-assigned keyboard strokes. I intend to use it to change the color of the highlights. But my research stopped at changing the color in the property menu of adobe reader, where it seemed impossible to active another color setting except the default one by keyboard strokes. It seems that I can do these in other adobe versions. Am I missing anything here?

My problem seems too specific to search for. I'm not looking the manual for the keyboard support, I'm rather reporting a bug and pursue a fix.

Keyboard support in DC based page

Similar Messages

Maybe you are looking for