Keynote - The font Calibri is missing. Your text might look different.

Since updating Keynote app, I keep getting the following message every time I open my presentation...even when I have made other changes:
Some changes were made to your presentation. The font Calibri is missing. Your text might look different.
With over 100 slides, how can I find the font? Keynote used to make the change for you and you would never see this message again. Its so annoying. Also, why have you taken away so many of the easy functions like replacing images. Now it takes additional steps..sure hurts productivity.

The fonts on iOS are a limited set of fonts system wide.
Only really few app allow to install custom fonts. I assume that apple trys to prevent compatibility problems with the system.
May i guess is that you have reused a PowerPoint-Template? The message is clear for Calibri is one of the standard fonts of MS-Office and not on the Mac or iOS by default. I get this message regularly whe opening Office-docs.
When you are using styles the soultion should be easy: change the styles to a font that is on the iPad too - as Times. The changed styles should affect the whole document.
And don´t forget the master slices for they got font formats too.
Regards
AW

Similar Messages

Is there a way to change the font size and color of text in the calendar app?

Does anyone know a way of changing the font size and color of text in the calendar app that comes with the iPad 2? It is very hard to see the small gray numbers on the calendar. Thanks

Looks like you didn't get a reply on your post, but it is still a problem. Font size is supposedly changeable via "Accessibility" in Settings, but it doesn't work. You can turn on "Zoom".

How do you change the font color in CALL-OUT text boxes in PRO XI?

How do you change the font color in CALL-OUT text boxes in PRO XI?

It's not so simple to find it if you don't know what you're looking for... But it can be found via View - Show/Hide - Toolbar Items - Properties Bar.

Using the paste options randomly misses out text, don't use it and use the 'Paste Special...' option instead (MS Outlook)

Also there seems to be no obvious way to report Office bugs. This is leaving little room for improvement. Not sure if there has been any planning on this front???
For example, [MS Outlook] using the paste options randomly misses out text, (don't use it and use the 'Paste Special...' option instead). But how do I communicate this to the Office team without knowing at least one of the team personally (which I
don't)???

Hi,
Do you have this issue when pasting in other programs?
If you are pasting something into Outlook, some formats and images may get lost, especially when you choose the Paste Options as Keep Text Only.
Once you have this issue again, please try with "Keep Source Formatting". This may keep the Sour Formatting and you may not get the text lost.
If you have any feedback when using our products, I suggest you press Ctrl + Alt + 7 or Ctrl + Alt + 8 to submit it. Microsoft will always listen to users' voice and make the products better and easier to use.
Regards,
Melon Chen
TechNet Community Support

ADF Mobile: How to change the font size of an Input Text field in .amx view

Is there a way to change the font size of the input data (not the label) in a text field? Changing the font size in the Style Font/Text settings doesn't seem to do anything for the label or the value in the input text field. Is this a bug or is there a way to get this to work?

Hi Anna,
depending on the UI element there are a range of ways. (and I'm sure people will post plenty of answers to tell you how).
However, if generically the fonts in you portal/wd applications are too small, you should consider changing your theme so as to have larger texts. Otherwise you will either need to customise all your applications, or you will get quite a lot of inconsistency of presentation between your various WDA applications.
Do a search on "themes for Web Dynpro ABAP" and you'll find loads of resources.
Hope this helps,
Cheers,
Chris

"Missing fonts" message when the fonts are *not* missing

I get the "Missing fonts" message fairly often for fonts that are not really missing. Then I have to specify the fonts that I used to create a given document, which are installed on my Windows XP system and have never left.
Has anyone else encountered this problem? Is there any way to stop it from recurring? It happens every so often, not every time I open a document but every once in a while. It involves a particular set of fonts (Geometric).
Any suggestions? Thanks.
Orson

>I don't see any AdobeFnt*.lst files in my Fonts folder. But is that where to look?
No. They're scattered through all of the Adobe application folders. Do a search for AdobeFnt*.lst (using the *) and it should find them all. They get rebuilt automatically as required after deletion. Don't delete any file ending in .db.
Peter

Can not change the font size in a new text into the smartforms

Hi!!
I have a Footer window into my smartform and I've created a new text into this one
text type: Text element
nothing extrange.
I copied and paste a text from a word document and after that I want to change the font size to 8 and font style to Arial, but after saving the font size and styles goes back the 10 and Currier New.
Any idea?
I also tried typing the hole parragraph and I get the same issue!...
Thanks.

Hi
First Reset paragraph and Character and then set the new fontfor the same.
dont copy the same into word and back form
also goto change editotr and check the style used for the same.
Regards
Shiva

How can I change the font in which my emails text are recieved

Regardless of what font style I choose when compiling an email it is always recieved by the recipient in the same default not very good style, I cannot find anywhere under options etc where I can change this. I did not have this issue when using Outlook Express on my previous computer.
regards
J.A.Smith

If you're concerned about setting a specific font in outgoing messages, then I think the Stationery add-on will be useful to you. You can set up a template with explicit font specifications (but do bear in mind that not all fonts are available on all computers. We don't all use Windows!)
My experience is that the default html formatting in Thunderbird sets the size but not the face. Your recipient's email client, not being able to find a formal font request, will offer up whatever its default is set to, often Times Roman on a Windows system.
https://addons.mozilla.org/en-US/thunderbird/addon/stationery/
The trouble with this add-on is that it gives you a means to employ templates, but leaves you to your own devices to generate or obtain any. Most users would already be using stationery templates acquired for use with OE and wouldn't be concerned with creating their own.
I use one that contains this:
<code>
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<style type="text/css">
body {
text-align: left;
font-family: sans-serif;
font-size: medium;
color: black;
background-color: white;
</style>
</code>
You can insert specific font faces and sizes to suit.

An answer: Do you miss your texts when on duty?

I use my iPhone for a pager and when I am in the garage and other places making noise, I often miss the notification. Note the pager is a text message, that just rings, then goes away. It is not a phone call that someone knows is unanswered. I am expected to take each pager call and expected to hear it. So a problem for me as I have to put my life on hold when on pager duty for fear of missing the notification.
BUT, it turns out, if you plug your iPhone into an external speaker [through the headphone plug, not the docking station connector], the ring tone is amplified! OK so maybe you all knew this, but I did not. So for example, on my push bike was always a time I missed the text tone. Even though I had it maxed out on loudness, and with vibration on, I could not hear it above the wind rushing through my helmet. Nor could I feel it. Incredible the number of pager notifications I missed that way.
Now no problem; I wear one or two earphones, the ear bud type and I can hear the ring tone, stop and take the pager. In my shed, plugged into an external speaker, I have no problem hearing it. Note that I don't play music or stuff through the earphone or speaker, though I guess you could. On my bike I just have the buds in my ears and when the pager goes off, I hear it.
Problem solved for me in a very elegant way; I wish I had discovered this earlier.
I hope my answer to an unasked problem helps at least one of you.

You can also set text alerts to repeat up to 10 times. Settings>Notifications>Messages>Repeat Alert.

Keynote on Ipad warning: custom and mixed lists may look different... bulleted list have bullet vertical alignment "issues" any fixes?

Help.
I am working on a high-end Keynote presentation. It was originally a poerpoint file, that I opened in keynote. So far so good. I applied keynote themes, and used bullets etc, looks great on the mac. Move it to the ipad, and the top bullet looks fine, all 1st level bullets below it have a higher vertical alignment, which no longer in alignment with the text. What am I doing to cause this? all spacing etc, is exactly the same.
anybody know a tip or trick to keep this from happening?

I answered my own question... with many, many tests.
I FINALLY figured out what the common feature was, that was causing the misalignment of the bullets.
Line spacing.
If you apply line spacing BEFORE a paragraph, it misaligns the bullets... which is WHY it wasn't happening to the 1st bullet in each text box, but only those following....
In the final test I changed the line spacing attribute to AFTER a paragraph, and VOILA! no more misaligned bullets.
It's definitely a bug in the software, since either way it looks fine on the mac, and is only a problem on the iPad.
hope that saves someone else some valuable time!!!

I get missing fonts when opening a PDF, but the fonts are activated, I get garbage

I get missing fonts when opening a PDF, but the fonts are activated, I get garbage

The activated fonts are not the same version as those in the PDF. If you use Type>Find Font and replace the fonts with ones from your computer does it work?

Can you increase the fonts for your iphone 5s

I can increase the fonts for my email and texts but can you increase the fonts for everything on your iphone, example apps

If by "for the Apps" you mean the app labels? No. But you might try experimenting with Accessibility settings to see if you can acheive something that will help. As for the size of text within an app, that would depend on whether the app provides that configuration setting.

Font "Calibri" looks odd

Hi,
I want to use the font "Calibri", but it looks odd everywhere. That means it is not vertically centered.
I just set -fx-font-family: Calibri; in .root
What should I do?
Edited by: csh on 07.02.2012 04:49

Can you post an image somewhere of how the font looks odd and link to it?
Are you using the latest 2.1 developer build which enables LCD text on controls on Windows?
I don't think the LCD text feature is enabled by default on Mac or plain Text nodes which you add to your scene.
Are you using a Mac or Windows machine?
If Windows, is it 7 or XP?
If Windows, does it have ClearType turned on http://www.microsoft.com/typography/cleartype/tuner/step1.aspx?
For XP, you may need to download a PowerToy from the linked page to enable ClearType, for Windows 7 it may turn on ClearType by default, but you could check somewhere in the Windows 7 control panel to see.
Note that if you also want to target a Mac or Linux, it may not have the Calibri font available by default, so you may want to bundle it with your application (see the using custom fonts documentation: http://docs.oracle.com/javafx/2.0/text/jfxpub-text.htm). Note that bundling custom fonts gave errors for me in some of the 2.1 builds - I believe it has been fixed now, but I'm not sure if the fix has made it into the developer preview builds yet. The font is available here => http://www.labnol.org/software/tutorials/free-download-calibri-font-on-mac/3684/. I don't know what the license clauses on bundling Calibri are though, so you may want to check that first.

What happened to the default folder set (for your own libraries) in Edit/Preferences, in Adobe Photoshop CC?

Once again I come to my computer, and it's not the way I left it. While I love cloud, I think in some way, the concept of Customer Service i.e. Providing a Service to a Customer "Set Service, for a Set Price" has lost the value of "service"
I find it extremely disheartening, to always be dealing with changes Adobe makes, it costs me an exorbitant amount of time. I don't work with a team, so it's just me. And every other week, there is some changes, when my 3D quite working in CS6 I had no forewarning, just woke up one morning and "Poof" no more 3D, the software turned off the feature in my CS6, however, it did work in CC.
The things I find most disheartening
features quit working with NO PRIOR WARNING.
Plug-ins, libraries what, now have to be stored in the cloud in order for MY system to automatically see them?
Again No Default Libraries on our machines ( unless you think I'm going to store 2 Terabytes of libraries on the cloud and/or in my AppData Directory *not* Nothing but system/program files themselves go on my Primary drive, everything else is on external drives, this is a security issue and one I'm not about to change, nor should anyone have to change it, since it is a *best practices* standard.
I still can't access items in (for instance: Color Themes created on Kuler, are available on my computer, but not for me to put them into a library on the cloud. I have over 100 color themes there I have created, on my Creative Cloud account, why can they not be imported or drag/drop into the library designated for it. When I log into my Cloud Account on My iPad it is the same cloud account as on my PC, yet it doesn't even see my previously created color scheme's? Why? Does anyone have any ideas?
I use a font manager for Windows called High-Logic, a Font Manager, Creator and a Scanner for Hand Writing Fonts Great Program, I've had it for over a year, while there is no plugin for Photoshop there is for In-Design and for Photoshop, I use the Font Manager on my computer to activate the font I want and it shows up in the Character Tool Box automatically. Yet, just in the last week, every time I try and create something in Photoshop, I'm fine, until I go to use a font, at which time, my working project goes "dark" ( no longer visible) until I click on another tool in Photoshop.
I cannot keep having these issues, it's way too time consuming, it's exorbitantly time consumer attempting to get a response to questions in the forums (no one's fault, it's just the nature of the forums themselves)
The true cost of a product is not only in it's subscription based fee, but also includes the time it takes to keep up with product changes, additional training, the cost of delivery (cable connections/provider). So far since the first of the year I have logged over 100 hours to either 'fix something that quit working with no notice', time spent re-reading documentation seeking a solution, time spent perusing the forums for a solutions, or posting a question, time spent in additional training/books, etc."
While I understand I'm relatively new, as I had a 5 years off from working, I went from Macromedia Suite 8 to CS5.5 -full suite (heck-of a learning curve)
Yet, I cannot believe I am the only person having these issues, otherwise the forums wouldn't be so full.
I did try limiting the permissions to not allow Adobe to update the software automatically, however, the permissions I wrote, were in fact re-written by adobe's cloud synchronization, Which I did find disturbing on a few levels. None of which I'll go into, but it needed to be mentioned that *yes, I tried that too*.
*I ended up re-configuring my machine AGAIN* and deleting CS6 altogether, The performance change after I deleted CS6, was/is the difference and why I am still with my cloud membership.
**I have reconfigured my machine numerous times, to facilitate the cloud, I am on a PC, Adobe and Microsoft Development Environments do not play well together, I ended up removing them altogether and creating a vm for them and basically all my development work. And have twice since reconfigured it for various reasons.

Hi
One of the reasons that Edge fonts and web fonts are though to be preferable to the old font stacks was because of Android tablets/smartphones only having the Droid font family available, (Android 4.3 added the Roboto font family also).
This meant that Android device users defaulted to the 'Droid' font or a user installed font. The default font if the user had installed a custom font and set it as default, could be anything, (even a comic script font) thus possibly destroying your text and/or layout completely.
If you are not using an Edge font or a downloadable font do not forget to set the last three fonts in your font stack to -
'...., Roboto variant, Droid variant, default font'
PZ

Since the latest update to OX I have been unable to download the contents of some emails because pages does not support the font they are created in. Is there a fix for this?

Hi, since I installed the latest update on my Mac I have been unable to open the contents of some emails because it is saying that pages does not recognise the font. For example it is saying 'some features aren't supported, the font Calibri isn't available on OS X. It was replaced with TrebuchetMS' This means that I cannot open letters from my daughters school. Is there any way round this other than getting rid of this nightmare MAC and going back to Windows!?

http://www.mozilla.com/en-US/firefox/3.6.13/releasenotes/
Had the same problem; would have been nice if they had told s that we need an intel processor on our older Macs! I am up and running again.

Keynote - The font Calibri is missing. Your text might look different.

Similar Messages

Maybe you are looking for