Keys are screwed up

Hi everyone,
A couple of days ago the most stupid thing happened to my phone. I'm sure you already get it: I dropped it in the toilet. A clean toilet, I must say.
I have put it in dry rice everyday for 4 days and now I tried to turn it on again. Everything works as it's supposed to, but my keys are screwed up. When I push one button, let's say 'h' I get 'hoyu'. 'Delete' turned in to 'Enter'. The only buttons that do work are the Enter button, the 'g', 'a' and 't' and ofcourse the trackball is working perfectly fine.
Now I wonder, is my phone broken or should I leave it to dry for a couple more days?
Thanks in advance!
Edit: forgot to say that all the keys have been working for a sec.

I dropped mine in water.. Everything works on it but the buttons, I haven't found anything to fix it either..Good luck
Twisted Gypsy

Similar Messages

A few keys are not working

A few keys were a sticky so when I would press it would give a sticky effect.
So I got a tissue and wet it and then applied it onto those keys. Then those keys weren't sticky anymore.
But soon a few of those keys stopped working. These keys are "brightness up", "2", "w", "s".
So I have left it out in the for a little while, so any water can evaporate.
PLEASE HELP ME.
Are there any solutions or if repair is required how much will it cost?

Thanks for replying (thorvsphoenix)
The windex was sprayed on the cloth, not the keyboard. And only one or two pumps on a hand towel. No liquid seeped between the keys the towel was barely damp. You are saying the ammonia gas created the problem?
I think It was more an issue of multiple keys being depressed at the same time that screwed up the configuration. That is why I need to "reboot" the keyboard.

I cleaned my wireless keyboard with a cloth that had a few sprays of windex on it, wiping back and forth and up and down on the keys. Now, various keys are not working. Is there a way to "reset" the keyboard to restore the keys?

I cleaned my wireless keyboard with a cloth that had a few sprays of windex on it, wiping back and forth and up and down on the keys. Now, various keys are not working. Is there a way to "reset" the keyboard to restore the keys?

Thanks for replying (thorvsphoenix)
The windex was sprayed on the cloth, not the keyboard. And only one or two pumps on a hand towel. No liquid seeped between the keys the towel was barely damp. You are saying the ammonia gas created the problem?
I think It was more an issue of multiple keys being depressed at the same time that screwed up the configuration. That is why I need to "reboot" the keyboard.

My keyboard on macbook pro (laptop) is acting weird. One key is not responding at all. Have verified using Keyboard viewer and some other keys are printing the unresponsive character at random.

my keyboard on macbook pro (laptop) is acting weird. One key is not responding at all. Have verified using Keyboard viewer and some other keys are printing the unresponsive character at random. "z" is the unresponsive character.
Is it a damaged keyboard ?
The laptop is just 2 months old, will Apple replace it with a new one if its indeed a damaged keyboard or just repair, I use it for official purposes so being without a laptop is not much of an option.

No one here works for Apple, so we don't know what Apple might or might not do. If it's a genuine defect, they will of course repair it under warranty. It is not their responsibility if it effects your ability to work or not, so that's on you.
If, however, they determine that the key is problematic as a result of your misuse of the laptop, then everything is on you. And trust me, if they find a glob of dried up beer or coffee there, they will charge you.
Your only choice is to take it in for repair.

Why two remote keys are genrated in data manager when i'm syndicating the same records twice

Hi Experts,
Please guide me that will there be any problem if two remot keys are getting generated for the same system thougt we are expecting to update the same Business Partner Number in ECC.
Also We are able to see two different business partner number(in ECC this is KUNNR in KNA1)
Please guide me how to proceed so that when we syndicate the same set of records we want to get update the records in ECC for the same KUNNR.
We don't want to get another KUNNR for the same records.
Thanks!
Pankaj

"barbara" wrote in message
news:506500000008000000FAC20000-1077587809000@exchange.ni.com...
> I'm using the simulation interface toolkit V2.0 but it works only the
> first time after the installation. When I restart again my computer it
> doesn't work any more. Why??????????
>
---snip
I am not familiar with the different software that you mentioned but as a
first step I would check compatibility which is done as below:
Get original operating system CD that was used to install Windows XP on the
machine in your post. When Windows XP is inserted into CD ROM drive it
normally will ask you to conduct compatibility check for the current
installation. See what it says.
HTH
Mohan Pawar
----snip

Function keys are not working correctly

I've been looking all over the various threads and I can't find an answer that solves my problem.
Here are the details:
I bought the computer in the U.S. where I live.
I have a iMac 2.4GHz intel Core 2 Duo EMC 2133 with a 20" screen. Bought it new in February 2008.
I have Mac OS X 10.5.8 (I am waiting for my order for OS Snow Leopard to come in!!)
I have been using a wireless mouse and Keyboard (Love not having cords!)
Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
Here are the problems:
Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows.
Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
A couple more important or interesting facts:
Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
I have restarted the computer.
One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

Function keys are not working on a paired apple bluetooth keyboard

hello, I just got this apple bluetooth keyboard and paired it to my ipad2. The letter and number keys are working perfectly fine, but my ipad will not respond to F1 to F12 keys,I tried Fn+F1-F12 they are not working. Then I tried to restart both my ipad and keyboard but the problem is still there. Additionally, Command+arrows can't function either. command+space is working though. Could some one please help? thanks a lot!

It might have been functionality that Apple has removed in the current version of iOS. This old web article says the function keys worked in iOS3, but that's a couple of years ago:
http://socialtimes.com/apple-bluetooth-wireless-keyboard-function-keys-work-with -the-ipad_b47087

How to find out which keys are pressed while a d&d drop occurs?

Hi,
while an item is dropped as part of a drag and drop operation, I would like to know if the user has pressed any keys.
I use a TransferHandler for managing the d&d and this works fine with the system dependent modifier keys for move, copy and link. But as my application needs to perform special actions if, for example, 'p' is pressed while a drop occurs, I'm stuck:
It looks like there is neither a way to poll for pressed keys [like Keyboard.isPressed('p')] nor are there any key events fired as long as the d&d operation is active.
I've tried a adding a key listener, adding a key binding and using the KeyboadFocusManager but nothing seems to work.
Any ideas?
Thanks,
Norb

Hi,
the question is where the focus would be - because as you know unless there is a record in InputMap and keys are usually only received by focused component anyway. I'd recommend hooking into Swing event queue, something like that:
Toolkit.getDefaultToolkit().getSystemEventQueue().push(new EventQueue() {
    protected void dispatchEvent(AWTEvent event) {
        if (event instanceof KeyEvent && dragging) {
            // do something
});

My apple wireless keyboard got wet a year ago i sprayed the cleaning spray on it some of the keys are working but some of the keys aren"t working. it got sprayed a year ago What should i do??? Can it be recovered plz tell?

I sprayed it a year ago i really like the keyboard and i really need it can it be recovered??? My apple wireless keyboard got wet a year ago i sprayed the cleaning spray on it some of the keys are working but some of the keys aren"t working. it got sprayed a year ago What should i do??? Can it be recovered plz tell?

There is almost no chance it can be recovered, except at a cost far greater than a new keyboard. Once wet, spraying with a cleaner will not do any good and most likely will make the situation worse.
Best thing at this point is go to your Apple store, or the on-line store, and buy a new keyboard. Water damage is not covered by the warranty or AppleCare.

Some keys are not working on my Satellite C notebook

since today i have some problems with some keys on my keyboard my Z, \ (left side next to the Z) and my FN key doesnt work (XD i had to copy and paste the Z) but this problem is realy anoying is there a way to fix this?

It is not known to me that single keys repair can be done.
In such case the whole keyboard must be replaced.
I dont know which notebook model and how old it is but it is possible that certain keys are broken.
What you can try is to remove key cap and check if key is dirty and see if there is some contact problem.

I have a 27" desktop mac running with OSX 10.6.8. The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing. Now the cursor moves but cannot select anything. Suggestions?

I have a 27" desktop mac running with OSX 10.6.8. The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing. When opening up a browser or application, the cursor moves but cannot select anything. Suggestions?

Maybe something in these Apple support articles will help.
Keyboard Doesn’t Work
Keyboard Keys Do Not Respond
Keyboard/Mouse – Troubleshooting Wireless

Hello, how much did you pay when some parts of the keyboard keys are not working properly due to accidental spilt of tea?

I accidentally spilt a tea on the keyboard of my Macbook Air 11'. I managed to wipe the keyboard and saved my laptop. However, I noticed that the Spacebar, Shift and Command keys are not working as it should be. It's like something's stuck inside that makes these keys hard to press as usual. I refered this problem to Amsys, Berwick St London, as the reservations in Apple Stores are full. Do you have any idea how much is the cost for diagnosis and repair if ever?
Please help.

if you spilled a good bit of tea, its a serious problem, yes.
it got inside, and will corode, and bad things will begin to happen.
Liquid spills, why your MacBook chassis is a one-way valve for spills
After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.

I have a iMac running on an iMac and the F operation keys are not working properly.

My new iMac bluetooth keyboard is having issues all of the F operation keys are not working exept for F12 witch is supposed to be volume up takes me to mission control. I went into system prefrences and there was no setting in keyboard for the volume keys there are some settings for the operation keys but they are all checked and they are still not working and the settings that are checked arn't even what the keys are supposed to do. Please help.

SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.
PRAM RESET
Zap the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

I am facing problem in playing yahoo pool in Firefox 4 while it was working fine in Firefox 3.6. In Firefox 4 the combination of mouse keys are not working properly.

I am facing problem in playing yahoo pool in Firefox 4 while it was working fine in Firefox 3.6. In Firefox 4 the combination of mouse keys are not working properly.

I updated to Firefox 4.01 today and the middle scroll button on my Lenovo T400 stopped working. I downloaded the updated Ultranav utility and the Ultranav driver for my T400 from here http://www-307.ibm.com/pc/support/site.wss/MIGR-72858.html and then uninstalled the "Thinkpad Ultranav Driver" from Add/Remove programs rebooted and then installed the updated utility and driver (another reboot) and it now works perfectly.
So glad to get this working again.

CTRL, ALT and SHIFT keys are sticking (not physically)

I am having a problem with the T-61p I have been using for 2 years now.
About once every 2 days Windows thinks that either the CTRL, the ALT or the SHIFT key is held down. I only notice this when my mouse's left click or my arrow keys starts behaving funny (like opening dialogs when clicking on icons or highlighting text on a page in MS Word) instead of moving the cursor as they should.
When this starts happening, pressing the CTRL, ALT and SHIFT buttons causes the strange behavior to stop.
None of the keys are physically stuck down. I am using an external keyboard with my laptop closed and docked. I have tried switching keyboards, and I get the same results with brand new Logitech keyboards.
What could this be? Has anyone seen this problem before?
Your help is much appreciated.

Welcome to the forum!
It sounds like you've inadvertently turned on the Sticky Keys accessibility feature. Since you didn't mention which operating system you're using, I can't tell you how to turn it off. Trying searching for Sticky Keys in Help in the Start button menu.
Hope this helps!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Keys are screwed up

Similar Messages

Maybe you are looking for