KM Performance for distant offices

Hello,
We are an international Company with a lot of small offices around the world, but with 2 main locations: Israel and US.
Our Portal development and Administration team is currently located in Israel and so are our servers. we are using a lot of our own java iViews and also
KM iViews for presenting CM.
Our main performance problem is that our US users are complaining about bad performance for our KM iViews (resource collections rendering and initial iview loading are very slow i.e. 5-6 sec. per action).
Does anyone have any suggestions about what we can do to improve the performance of KM users in US.
We currently have 2 portal servers (clustered) located in Israel.
1 portal database and PCD server located in Israel.
1 portal ldap server (replicated from our corporate ldap server) located in Israel.
1 corporate ldap server located in Israel.
We are using windows machines as we have EP 5 SP5 portal.
I would very much appreciate a suggestion that will allow us to keep the performance we have in Israel but also improve what the US users have.
Thanks,
Carmit.

Hi,
we had also performance problems with browsing in repositories and taxonomies when we used EP5 SP5.
We updated our portal to EP5 SP6 and installed CM SP6 Patch 1 for improving the performance in the content management component.
Best regards,
Arnold

Similar Messages

Hi all,I am planning to buy apple air or pro laptop for my office use,kindly give ur suggestions,will it work structural design software like staad pro ETAB,cad in apple laptops?

Hi all,I am planning to buy apple air or pro laptop for my office use,kindly give ur suggestions,will it work structural design software like staad pro ETAB,cad in apple laptops?

Hi VigneshCivil,
Thank you for using Apple Support Communities.
Without knowing the specification requirements of the applications you will be using, I can't give you a specific recommendation. But I have provided you with the specifications of the two screen sizes of both the MacBook Pro Retina and the MacBook Air to compare with the requirements of your apps. One caution I would provide is not to go with the bare minimums required for the app, doing that would not give you optimum performance.
MacBook Pro (Retina, 15-inch, Mid 2014) - Technical Specifications
MacBook Pro (Retina, 13-inch, Mid 2014) - Technical Specifications
MacBook Air (13-inch, Early 2014) - Technical Specifications
MacBook Air (11-inch, Early 2014) - Technical Specifications
Regards,
Jeff D.

Template Builder (XML Publisher Report) for Open Office

Hi,
Do any body has any idea, if can have template builder for Open Office also, My company has un installed MS Office from my machine, and they dont have license now.
Thanks and Regards,
Nidhi Gupta

Hi All,
I think Oracle can provide a BI Publisher Software for the Open Office, since the licencing cost for MS Office is very high.
"OpenOffice Writer" is a open source alternative to MS Word and can be used on Linux. If I am using Linux OS and have to work on BI Publisher templates then certainly I will have to install Windows or use WINE ( I donno how it works but heard of it)
Other Oracle tools such as SQL Developer, etc are platform independent.. then why only BI Publisher is limited for windows/MS Office.
Tim,
Can you please answer..
I think it should integrate with OpenOffice too!!
Regards,
- Ejaz
[email protected]

How to obtain the table index in word use LabVIEW Report Generation Toolkit for Microsoft Office

I created a word templete and it had several tables. When I use the "Word Edit Cell" function in LabVIEW Report Generation Toolkit for Microsoft Office, the function need "table index", and I didn't find any function to get or set the table index in word document. How can I achieve my attention to write value to specified table cell using the "Word Edit Cell" function?
Thanks for reply!
YangAfreet

Hi yangafreet
You do not need to get the table index for the word edit cell.vi from anywhere. LabVIEW will automatically index all the tables in the document. See the attatched vi for an example.
Rich
Attachments:
Table Edit.vi ‏23 KB

Performance for table BKFP

Hi,
I would like to enquire is there anyway that i can improve the performance for table BKPF from the ABAP code point of view.
Because we have customise one program to generate report for the asset master listing.
one of the select statement are show as below:
      SELECT SINGLE * FROM BKPF WHERE BUKRS = ANEP-BUKRS
                                  AND GJAHR = ANEP-GJAHR
                                  AND AWKEY = AWKEYUS.
I would like to know how it different from the select statemene below:
SELECT SINGLE * FROM BKPF INTO CORRESPONDING FIELDS OF T_BKPF
      WHERE
      BUKRS = ANEP-BUKRS
AND GJAHR = ANEP-GJAHR
AND AWKEY = AWKEY.
Which of the select statements above can enhance report,because currently we have face quite bad issue on this report.
Can i post the ABAP code on this forum.
Hope someone can help me on this. thank you.

Hi,
As much as possible use the primary keys of BKPF which is BUKRS, BELNR and GJAHR. Also, select only the records which are needed so to increase performance. Please look at the code below:
DATA: lv_age_of_rec TYPE p.
FIELD-SYMBOLS: <fs_final> LIKE LINE OF it_final.
LOOP AT it_final ASSIGNING <fs_final>.
get records from BKPF
    SELECT SINGLE bukrs belnr gjahr budat bldat xblnr bktxt FROM bkpf
    INTO (bkpf-bukrs, bkpf-belnr, bkpf-gjahr, <fs_final>-budat,
          <fs_final>-bldat, <fs_final>-xblnr, <fs_final>-bktxt)
    WHERE bukrs = <fs_final>-bukrs
      AND belnr = <fs_final>-belnr
      AND gjahr = <fs_final>-gjahr.
if <fs_final>-shkzg = 'H', multiply dmbtr(amount in local currency)
by negative 1
    IF <fs_final>-shkzg = 'H'.
      <fs_final>-dmbtr = <fs_final>-dmbtr * -1.
    ENDIF.
combine company code(bukrs), accounting document number(belnr),
fiscal year(gjahr) and line item(buzei) to get long text.
    CONCATENATE: <fs_final>-bukrs <fs_final>-belnr
                 <fs_final>-gjahr <fs_final>-buzei
                 INTO it_thead-tdname.
    CALL FUNCTION 'READ_TEXT'
      EXPORTING
        client                        = sy-mandt
        id                            = '0001'
        language                      = sy-langu
        name                          = it_thead-tdname
        object                        = 'DOC_ITEM'
      ARCHIVE_HANDLE                = 0
      LOCAL_CAT                     = ' '
    IMPORTING
      HEADER                        =
      TABLES
        lines                         = it_lines
     EXCEPTIONS
       id                            = 1
       language                      = 2
       name                          = 3
       not_found                     = 4
       object                        = 5
       reference_check               = 6
       wrong_access_to_archive       = 7
       OTHERS                        = 8.
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ENDIF.
if successful, split long text into start and end date
    IF sy-subrc = 0.
      READ TABLE it_lines TRANSPORTING tdline.
      IF sy-subrc = 0.
        SPLIT it_lines-tdline AT '-' INTO
              <fs_final>-s_dat <fs_final>-e_dat.
      ENDIF.
    ENDIF.
get vendor name from LFA1
    SELECT SINGLE name1 FROM lfa1
    INTO <fs_final>-name1
    WHERE lifnr = <fs_final>-lifnr.
    lv_age_of_rec = p_budat - <fs_final>-budat.
condition for age of deposits
    IF lv_age_of_rec <= 30.
      <fs_final>-amount1 = <fs_final>-dmbtr.
    ELSEIF lv_age_of_rec > 30 AND lv_age_of_rec <= 60.
      <fs_final>-amount2 = <fs_final>-dmbtr.
    ELSEIF lv_age_of_rec > 60 AND lv_age_of_rec <= 90.
      <fs_final>-amount3 = <fs_final>-dmbtr.
    ELSEIF lv_age_of_rec > 90 AND lv_age_of_rec <= 120.
      <fs_final>-amount4 = <fs_final>-dmbtr.
    ELSEIF lv_age_of_rec > 120 AND lv_age_of_rec <= 180.
      <fs_final>-amount5 = <fs_final>-dmbtr.
    ELSEIF lv_age_of_rec > 180.
      <fs_final>-amount6 = <fs_final>-dmbtr.
    ENDIF.
    CLEAR: bkpf, it_lines-tdline, lv_age_of_rec.
ENDLOOP.
Hope this helps...
P.S. Please award points for useful answers.

LabVIEW Report Generation Toolkit for Microsoft Office

Hi!
One question. I have bought the LabVIEW Report Generation Toolkit for Microsoft Office
Version 1.0a and am trying to install it under Labview 7.1 but the installation stops with the error: "you need a Labview Version 6.0 runtime engine." Is there any possibility to install the toolkit anyway?
Regards
Stefan

Hi
You can try to update your Version 1.0 to Version 1.0.1. Then it should be working.
Here ist the link for the free update:
http://digital.ni.com/softlib.nsf/websearch/19003CF70BB8A57186256E5A00672E2A?opendocument
if it not works you can try to install the runtime engine 6.0 on your system. her is the link:
http://digital.ni.com/softlib.nsf/websearch/D5F11A64A905DB27862569EC005E31E2?opendocument&node=132070_US
Regards
Manuel

Office Plug-in : support for MS Office 2010 version

We tried to use the Office Plug-in that is available with OBIEE version 10.1.3.3.2 for MS Office 2010 version.
It does not work and throws an error message that indicates Office 2003 or Office 2007 are the versions that are supported.
Questions:
1. Is there a patch available for this plug-in that will work with Office 2010 version?
2. Does OBIEE 11.1.1.3 (Current release) support Office 2010 through the plug in? If not any insight into when Office 2010 is supported by the OBIEE Office Plug-in
Also, I heard that Office Plug-in and Smart View are going to be merged into a single product in the future releases... any thoughts on this as well.
Thanks
Sundar

We raised a support log few weeks back on this. The answer Support gave:
At the moment, Office 2010 is not certified against the current release of OBIEE 10.1.3.4.1 and OBIEE 11.1.1.3.0
Oracle is planning on Supporting MS Office 2010 on with BI 10.1.3.4.2 and 11.1.1.4.0. No official eta's for the releases at this stage.

Error in Plugin Installation For MS Office 2013 on Windows 8 and 8.1

Hello,
We have developed an installer for MS Word and MS Excel plugins. So far it has been working fine for MS Office 2003, 2007 etc. but since I have upgraded to a Windows 8.1 machine with MS Office 2013 installed, the plugin installation is giving error.
The installation fails and an error dialog appears with Error Code Type: Error, Error:1, Owner:30a.
The installer works well for MS Office 2010 on Windows 8/ 8.1 machine or MS Office 2010 on Windows 7 machine.

HiDinesh,
Is there any other error message when installation fails?
According to this error message “Error Code Type: Error, Error:1, Owner:30a.”
This is problem conclusion provided by IBM:
This issue is no longer reproducible in V6R2012x.
Installation checks have been modified to throw an error only when none of the Office applications
(Word, Excel, PowerPoint and Outlook) are installed. This error will not occur if one or more of the Office products are installed.
For more detail information:
http://www-01.ibm.com/support/docview.wss?uid=swg1HE09464
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If there is anything I can do for you regarding this issue, feel free to post back.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Add Report Generation toolkit for Microsoft Office in exe

Hi
I am having a problem. I am using LabVIEW 8.20, Report Generation Toolkit for Microsoft Office 1.1.2 and Microsoft Excel 2003. My OS is Windows XP (SP )
I want to build the vi attached below into an exe. The vis that I used are from addons>>_office>>excel.llb. I follow the suggestion found in the link below and add in all the files in excel.llb into my project so that it can be added into the executable as dynamic vis. However, some vis in excel.llb cannot be added into my project. After I have add all vis that can be added into the project, I build an application (exe) with the vi below as the Main vi and all other added vis (from excel.llb) as dynamic vis. After that, I build and run this exe on the same PC. I am unable to run it.
This vi will save datas when I click on the stop button. After I click on the stop button, a window will pop-up and prompt me to select which directory to save the vi. When I run the exe, I type in test.xls (for example) but the file saved is a picture and not an excel file. If I just run the vi instead of the exe, Excel will open and datas and graph will be displayed in Excel.
May I know where did I done wrong??
How do I use the Report Generation Toolkit in an executable with Microsoft Excel?
http://digital.ni.com/public.nsf/websearch/C38CE3F30542D65B86256F0E00740DD8?OpenDocument
Thank you & Regards
Lee
Attachments:
Self-Regulating.vi ‏132 KB
Untitled Project 1.zip ‏3841 KB

Hi centerbolt,
Thank you for your reply. I have tried adding in just that dynamic vi found in Excel Library and my main vi but it still cannot work. Is there anything that I need to look out as well?? [View attached picture.]
Thank you & Regards
Lee
Attachments:
added.JPG ‏92 KB

How can I distribute an application using Reprot generation Toolkit for MS Office for different versions of MS Office?

I want to create an application which uses the Report Generation Toolkit for Microsoft Office. The office version of the target machine depends on what my customer has installed.
From several discussions I have seen that the installer detects which version I have on my development machine. I'm not able to hold three or four machines with different versions (97,2000,2002,XP).
I decided to do the following software architecture:
I create a LLB MakeReport.llb with a VI called MakeReport.vi. With VI server I will start MakeReport.vi in MakeReport.llb. Over a named queue I will send a command from my application to MakeReport.vi. Then the report will be
printed.
I will create this LLB by saving MakeReport.vi with File>>Save with options...>>Application distribution. All neccessary VIs will be in the LLB.
I will hold different directories for each version. I can create different version of the LLB. During installation of my application the LLB for the right version will be copied from the CD to the application folder.
I know I will be restricted in testing my report in only one version and hoping it will be good in the other versions.
I think that the difference lays only in the word and excel related llbs.
1. Will my software architecture work or is it obviously wrong?
2. How will I get all versions from the toolkit CD?
3. Which is the registry key I must read to get the right version (a minor question, if somebody knows I do not need to search for myself).
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Lookout saves the files in .csv form which can be opened in Excel. I did make some progress by using the "append table to report" vi which allowed me to put values into an array and then those values were entered into my template on my report vi.
Where I am stuck now is I want to be able to put values into my template from a .csv file, not from an array I have to manually put numbers in.
Once those values are in my template I want to pull summed values from the template and place them into a final excel file for printing.
I have attached examples of the files I am working with to help you better understand what I am trying to do.
I hope that makes sense.
Jason Phillips
Attachments:
HourlyTotalsTemplate.xls ‏120 KB
eb_rain_gauge_ss.csv ‏23 KB
EastBankHourlyRainReport.xls ‏28 KB

LV Report Generation Toolkit for Microsoft Office says "This VI or item belongs to a library that is expired or invalidly licensed"

I have downloaded the LV Report Generation Toolkit for Microsoft Office for evaluation with LabVIEW 2010. The examples for the Help get many errors, including "The subVI is not executable. You must fix all errors in the subVI before this VI can run." and "This VI or item belongs to a library that is expired or invalidly licensed".
I selected that I wanted to evaluate the toolkit instead of putting an activation code during installation. Installation went OK.
How can I get the examples in this LV Toolkit to Run so that I can evaluate it?
Solved!
Go to Solution.

Also when I place the MS Office Report function in my block diagram, I get: "Unable to View Properties" popup message and no Contextual Help on the function.
How can I get these RGT function to work properly so that I can evaluate the toolkit?

請問在NI網站上有NI LabVIEW Report Generation for microsoft office V 1.1.2

NI 網站上提供Report Generation for microsoft office 版本為1.1.3
可是我用的Lab View是8.0版，不適用。
找了許久都沒看到有1.1.2。

舊的正版軟體不會放在網站上，請洽業務部

How do I put data into a template using the Labview report generation toolkit for Microsoft Office?

I am running Lookout 5.0 and have recently purchased the Labview Report Generation Toolkit for Microsoft Office to create reports from my Lookout logged data. Since I have never used Labview I am having my problems. I tried following the tutorials but they do not seem to be examples of what I want to do.
I log rainfall totals (1 spreadsheet)in Lookout from 40 different sites in 5 minute increments. I copy these totals and paste them into another spreadsheet which sums them up to give me hourly totals and then paste those totals into a spreadsheet for distribution.
In Labview I create a new report and use the distribution sheet as my template, but how do I complete
the steps of loading the raw 5 minute data into labview and then paste it into the hourly total spreadsheet and then transfer those totals into the distribution template?
I have been trying to figure this out for over a week, and I am getting nowhere.
Any response would be appreciated.
Thanks
Jason P
Jason Phillips

Lookout saves the files in .csv form which can be opened in Excel. I did make some progress by using the "append table to report" vi which allowed me to put values into an array and then those values were entered into my template on my report vi.
Where I am stuck now is I want to be able to put values into my template from a .csv file, not from an array I have to manually put numbers in.
Once those values are in my template I want to pull summed values from the template and place them into a final excel file for printing.
I have attached examples of the files I am working with to help you better understand what I am trying to do.
I hope that makes sense.
Jason Phillips
Attachments:
HourlyTotalsTemplate.xls ‏120 KB
eb_rain_gauge_ss.csv ‏23 KB
EastBankHourlyRainReport.xls ‏28 KB

Control checkbox form field in word with report generation toolkit for Microsoft office

Hi all,
Happy New Year!
I insert in the word template the check box form field. It has a bookmark name "Check1".
Now I'm trying to checked or unchecked this field using the report generation toolkit for Microsoft office and I couldn't. If anyone now how to do it? I'm using LabView 8.0
Thanks in advance,
Boris
Solved!
Go to Solution.

Boris,
The Microsoft Office Toolkit does not have support for checking/unchecking check box forum field. You would have to research the activex functionality that enables this to be checked or unchecked and then do the activex calls yourself. I did hear of one csutomer who used a special font to write a blank box or a checkbox into a word document and changed it that way as well.
Maybe http://www.ozgrid.com/forum/showthread.php?t=53715 gives a hint to an activex reference
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video

National Instruments releases LabVIEW Report Generation Toolkit for Microsoft Office.

The new LabVIEW Report Generation Toolkit for Microsoft Office is a library of flexible, easy-to-use tools for programmatically creating and editing Microsoft Word and Excel reports from LabVIEW. Whether you need to generate reports summarizing manufacturing test results or compile process statistics to improve your production yields, this toolkit speeds your development of customized, professional reports.
To see examples of this toolkit or get more information please visit :
http://www.ni.com/labview/report_gen_toolkit.htm

It is a bit limiting though. I built my own set of VI's, a toolkit if you will, that does some of what this tookit does. But, I also wrote some functionality that isn't available in NI's kit, such as creating charts as separate worksheets and linking the charts to data on another worksheet. All in all, the toolkit is great, but you can't get as much out of it as you can using the ActiveX calls yourself.

KM Performance for distant offices

Similar Messages

Maybe you are looking for