KMS Client activation not working.
We recently moved our KMSHost to a new server. Changed the DNS SVR record and all. All of the Windows 7 clients have moved over fine, but most of our newer Server 2012 R2 Servers are stuck on the old server information.
I have tried slmgr /skms and it will change the “KMS machine name from DNS”(shown with the slmgr /dlv command) but not the KMS machine IP address:”. If I run slmgr /ckms it will just put back in the wrong machine name from DNS.
I have a second server in almost the same state except it lists nothing and setting the host and trying to activate I can see it query the svr record, its shown if I display the DNS, but it errors out.
In both servers if I run slmgr /ato I get the following error.
Error: 0xC004F074 The Software Licensing Service reported that the computer could not be activated. No Key Management Service (KMS) could be contacted. Please see the Application Event Log for additional information.
Any idea on how to fix this problem?
Thanks Chris
Check that your new KMS is correctly loaded with the relevant updates and pkeys - you can get the 4F074 error, when a KMSclient machine locates a KMShost but the located KMShost doesn't have the correct updates/pkeys to service the request.
Use "cscript slmgr.vbs /dli all > kmsout.txt" to dump out the current status of your KMShost.
Which pkey is licensed/active? What OS is your KMShost running?
If you KMShost OS is WS2008R2, you need to apply updates and the WS2012R2 KMShost pkey to it, or it will not service requests from WS2012R2 KMSclients.
http://social.technet.microsoft.com/wiki/contents/articles/22510.volume-activation-kms-mak-adba-avma.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
Similar Messages
-
Windows 7 KMS client activation error
hi,
Windows 7 KMS client activation error
Any known issue?
ThanksThis problem occurs if the KMS server does not find a valid Windows marker in the ACPI_SLIC table in the computer's BIOS program. This problem occurs for one of the following reasons.
Cause 1
You purchased a computer that has a qualifying Windows operating system installed. However, the Windows marker in the ACPI_SLIC table is corrupted.
Cause 2
You purchased a computer that does not have a qualifying Windows operating system installed. In this case, the Windows marker is not present in the ACPI_SLIC table. -
IPad activation not working please help Urgent
iPad activation not working, I got this message "this ipad is currently linked to an Apple ID, sign in with the Apple ID that was used to set up this iPad. I enter my icloud account and user name to the computer and its ok, but not working for ipad
See if these Apple Support documents help you ...
https://www.apple.com/support/appleid/
Find My iPhone Activation Lock: Removing a Device from a Previous Owner's Account
http://support.apple.com/kb/ts4515
If not those, then go to Apple Support for some official Apple Support help ...
Apple Support
http://www.apple.com/support/
Apple Retail Store - Genius Bar
http://www.apple.com/retail/geniusbar/ -
BPC 7.5 Admin Client Links Not Working
I am working in BPC 7.5 SP15 NW. I have recently upgraded to Windows 7 64-bit and now the links in the action pane in the desktop admin client are not working. The cursor does not change from the nornal pointer to the hand. That would indicate that the admin client is no longer recognizing them as links. The links work fine in the desktop Excel client. I am using 32-bit Excel 2010 with no other version of Office installed.
Has anyone heard of this behavior and how to correct for it?Hi Kannan,
i think this is a Osoft web site configuration issue, the error indicates that you have one duplicate section in the web site configuration file (web.config).
If you didn't alter the web.config file then the problem may occur because when you use framework 4.0, the machine config already has some of the sections defined that were used in previous ASP.NEt versions.
You should check which version of the MS Framework is configured for the application pool of the web site, change it to v2.
Let me know if this solves the issue. Or if you need more help to resolve it.
Kindest regards, -
[solved] NFS client will not work correctly
I have all my $HOME on an NFS Server. So long I used suse and debian, now I want switch to arch but the nfs-client ist not working correctly:
I start "portmap nfslock nfsd netfs" over rc.conf. When I do a "rpcinfo -p <ip-arch-system>" I got the following
stefan:/home/stefan # rpcinfo -p 192.168.123.3
Program Vers Proto Port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100021 1 udp 32768 nlockmgr
100021 3 udp 32768 nlockmgr
100021 4 udp 32768 nlockmgr
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100021 1 tcp 48988 nlockmgr
100021 3 tcp 48988 nlockmgr
100021 4 tcp 48988 nlockmgr
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100005 3 udp 891 mountd
100005 3 tcp 894 mountd
As you see "status" is missing, so the statd is not running. It sould look like the result on my suse box:
stefan:/home/stefan # rpcinfo -p 192.168.123.2
Program Vers Proto Port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 32768 status
100021 1 udp 32768 nlockmgr
100021 3 udp 32768 nlockmgr
100021 4 udp 32768 nlockmgr
100024 1 tcp 35804 status
100021 1 tcp 35804 nlockmgr
100021 3 tcp 35804 nlockmgr
100021 4 tcp 35804 nlockmgr
There is the "status" line and so the statd is running.
How can I fix that problem, so that statd ist running on my arch box too?
Last edited by stka (2007-06-10 15:59:48)The Problem ist solved.
I use ldap for authentication. During the setup of the ldapclient I copied the nsswitch.ldap to nsswitch.conf. But the line for "hosts:" was:
hosts: dns ldap
but in my dns ist no localhost entry. After I changed this line to:
hosts: files dns ldap
everything was ok. The statd is now running and I can start to migrate to archlinux ;-) -
Email activity not working on Clients site
Hi,
I created a Bpel process that contains an email activity, It works fine when I am connected to the Oracle network through VPN and while i am in the Oracle office.
But when I am at the clients site or connected through VPN, it doesnt work at all.
when I configure my ns_emails.xml to Oracle's info, it works fine but when its configured to clients info, it doesnt work.
I have configured ns_emails.xml and wf_config.xml
This is my ns_emails.xml when I am at the clients site._
note:_ Since I am not using the Default domain for deployment, I changed the <Name> under <EmailAccount> to cdmsd since I am deploying my Bpel processes to the cdmsd domain.
^<EmailAccounts xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"^
^ EmailMimeCharset=""^
^ NotificationMode="EMAIL">^
^ <EmailAccount>^
^ *<Name>cdmsd</Name>*^
^ <GeneralSettings>^
^ <FromName>Oracle BPM</FromName>^
^ <FromAddress>[email protected]</FromAddress>^
^ </GeneralSettings>^
^ <OutgoingServerSettings>^
^ <SMTPHost>mail.co.la.ca.us</SMTPHost>^
^ <SMTPPort>25</SMTPPort>^
^ </OutgoingServerSettings>^
^ <IncomingServerSettings>^
^ <Server>mail.co.la.ca.us</Server>^
^ <Port>25</Port>^
^ <Protocol>SMTP</Protocol>^
^ <UserName>[email protected]</UserName>^
^ <Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">Temp123</Password>^
^ <UseSSL>true</UseSSL>^
^ <Folder>Inbox</Folder>^
^ <PollingFrequency>1</PollingFrequency>^
^ <PostReadOperation>^
^ <MarkAsRead/>^
^ </PostReadOperation>^
^ </IncomingServerSettings>^
^ </EmailAccount>^
^</EmailAccounts>^
and for wf_config.xml I only add one line_
^<property name="oracle.bpel.services.notification.publisher_interval" value="1" />^
I dont understand why its not working while I am on the clients site ?? any ideas ??
could it be a network issue on their side ??I pinged my email server and I got the following:
{size:12pt}
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),{size}
Edited by: user9976478 on Jan 30, 2009 2:09 PM -
KMS client activation failed, but got server response?
I've been using KMS for several years. Generally there are no problems with KMS, but I have a single machine that is refusing to activate, and I cannot determine why. I've been doing extensive web searching but I'm not finding anything useful.
Windows 7 Pro client is using the Windows 7 Pro KMS client key GPDD4 as usual.
KMS Server is in Windows 2008 R2
The event log says the client is getting a response from KMS server (see below).
============================
Server: slmgr /dlv
Name: Windows Server(R), ServerStandard edition
Description: Windows Operating System - Windows Server(R), VOLUME_KMS_R2_B channel
Partial Product Key: 7GCM2
License Status: Licensed
Key Management Service is enabled on this machine
Current count: 50
Listening on Port: 1688
DNS publishing enabled
KMS priority: Normal
Key Management Service cumulative requests received from clients
Total requests received: 444
Failed requests received: 297
Requests with License Status Unlicensed: 0
Requests with License Status Licensed: 86
Requests with License Status Initial grace period: 12
Requests with License Status License expired or Hardware out of tolerance: 2
Requests with License Status Non-genuine grace period: 0
Requests with License Status Notification: 47
===============================
Client ability to find KMS Server:
C:\Users\foo>nslookup -type=srv _vlmcs._tcp
Server: UnKnown
Address: 172.20.0.8
_vlmcs._tcp.XXXXXXXXXXXX SRV service location:
priority = 0
weight = 0
port = 1688
svr hostname = dc3.XXXXXXXXXXX
dc3.XXXXXXXXX internet address = 172.20.0.11
===============================
Client: slmgr /dlv
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Professional edition
Description: Windows Operating System - Windows(R) 7, VOLUME_KMSCLIENT channel
Activation ID: b92e9980-b9d5-4821-9c94-140f632f6312
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00170-868-000000-03-1033-7601.0000-2092014
Installation ID: 011751536521019726056115618440708701492313365893152065
Partial Product Key: GPDD4
License Status: Initial grace period
Time remaining: 43200 minute(s) (30 day(s))
Remaining Windows rearm count: 1
Trusted time: 7/28/2014 9:36:41 AM
Please use slmgr.vbs /ato to activate and update KMS client information in order to update values.
=========================
Client: slmgr /ato
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
Activating Windows(R) 7, Professional edition (b92e9980-b9d5-4821-9c94-140f632f6312) ...
Error: Product activation failed.
=========================
Client: Application Event log
Security-SPP Event ID 12288
The client has sent an activation request to the key management service machine.
Info:
0x00000000, 0x00000000, dc3.XXXXXXXXXX:1688, 637b796e-5348-4ce1-b0b5-4d750e9d471e, 2014/07/28 14:43, 0, 2, 43200, b92e9980-b9d5-4821-9c94-140f632f6312, 25
Security-SPP Event ID 12289
The client has processed an activation response from the key management service machine.
Info:
0x00000000, 0x00000000, 1, 0, 50, 120, 10080, 2014/07/28 14:43
Security-SPP Event ID 1033
These policies are being excluded since they are only defined with override-only attribute.
Policy Names=(IIS-W3SVC-MaxConcurrentRequests) (Microsoft.Windows.Smc-Enabled) (Shell-InBoxGames-FreeCell-EnableGame) (Shell-InBoxGames-Hearts-EnableGame) (Shell-InBoxGames-Minesweeper-EnableGame) (Shell-InBoxGames-PurblePlace-EnableGame) (Shell-InBoxGames-Shanghai-EnableGame)
(Shell-InBoxGames-Solitaire-EnableGame) (Shell-InBoxGames-SpiderSolitaire-EnableGame) (Shell-MultiplayerInboxGames-Backgammon-EnableGame) (Shell-MultiplayerInboxGames-Checkers-EnableGame) (Shell-MultiplayerInboxGames-Spades-EnableGame) (Shell-PremiumInBoxGames-Chess-EnableGame)
(Telnet-Client-EnableTelnetClient) (Telnet-Server-EnableTelnetServer) (TiffIFilterLicensing-EnableTiffIFilter) (WindowsAnytimeUpgrade-CanUpgrade)
App Id=55c92734-d682-4d71-983e-d6ec3f16059f
Sku Id=b92e9980-b9d5-4821-9c94-140f632f6312
Security-SPP Event ID 1003
The Software Protection service has completed licensing status check.
Application Id=55c92734-d682-4d71-983e-d6ec3f16059f
Licensing Status=
1: 4de78642-0f7f-4b61-9392-8add86d70ae8, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
2: 50e329f7-a5fa-46b2-85fd-f224e5da7764, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
3: 5a79ecd8-d33f-406c-a619-7785899b5d59, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
4: 770bc271-8dc1-467d-b574-73cbacbeccd1, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
5: 90a61a0d-0b76-4bf1-a8b8-89061855a4c9, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
6: 92f9d22a-65f5-49a7-90fe-06491b4fc379, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
7: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
8: 9ccffaf9-86a2-414e-b031-b2f777720e90, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
9: b92e9980-b9d5-4821-9c94-140f632f6312, 1, 0 [(0 [0xC004E003, 0, 0], [( 1 0x80070057 30 0 msft:rm/algorithm/volume/1.0 0x00000000 0)(?)( 1 0x80070057 30 0 msft:rm/algorithm/volume/1.0 0x00000000 0)(?)(?)(?)])(1 )(2 [0x00000000, 0, 1], [(?)( 5 0x00000000 30
43200)( 1 0x00000000 0 0 msft:rm/algorithm/flags/1.0 0x00000000 0)(?)(?)(?)])]
10: c1027486-8ae8-4633-9cf9-9658ed80504d, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
11: c1e88de3-96c4-4563-ad7d-775f65b1e670, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
12: c33001fc-5e9c-4f27-8c05-e0154adb0db4, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
13: cf3c5b35-35ff-4c95-9bbd-a188e47ad14c, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
14: cff07cac-7534-4cc3-b3f3-99e1a0aa3c20, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
15: d188820a-cb63-4bad-a9a2-40b843ee23b7, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
16: d8e04254-f9a5-4729-ae86-886de6aa907c, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
17: da22eadd-46dc-4056-a287-f5041c852470, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
18: e120e868-3df2-464a-95a0-b52fa5ada4bf, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
19: e838d943-63ed-4a0b-9fb1-47152908acc9, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
20: 4a8149bb-7d61-49f4-8822-82c7bf88d64b, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
21: afd5f68f-b70f-4000-a21d-28dbc8be8b07, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
Security-SPP Event ID 1003
The Software Protection service has completed licensing status check.
Application Id=55c92734-d682-4d71-983e-d6ec3f16059f
Licensing Status=
1: b92e9980-b9d5-4821-9c94-140f632f6312, 1, 1 [(0 [0xC004E003, 0, 0], [( 1 0x80070057 30 0 msft:rm/algorithm/volume/1.0 0x00000000 0)(?)( 1 0x80070057 30 0 msft:rm/algorithm/volume/1.0 0x00000000 0)(?)(?)(?)])(1 )(2 [0x00000000, 0, 1], [(?)( 5 0x00000000 30
43200)( 1 0x00000000 0 0 msft:rm/algorithm/flags/1.0 0x00000000 0)(?)(?)(?)])]
============================
Client MGA output:
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-J8D7P-XQJJ2-GPDD4
Windows Product Key Hash: xgsndMkYdJsYmUng0qIJ/thx+HI=
Windows Product ID: 00371-868-0000007-85411
Windows Product ID Type: 1
Windows License Type: KMS Client
Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {5A310AE8-BFD2-49F1-A8BF-688D339981E8}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.140303-2144
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Microsoft Office Professional Plus 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files\Internet Explorer\iexplore.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{5A310AE8-BFD2-49F1-A8BF-688D339981E8}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.048</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-GPDD4</PKey><PID>00371-868-0000007-85411</PID><PIDType>1</PIDType><SID>S-1-5-21-3521851180-3244512111-2218252725</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Inspiron 546 </Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A09</Version><SMBIOSVersion major="2" minor="5"/><Date>20090808000000.000000+000</Date></BIOS><HWID>095F3D07018400F6</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Central
Standard Time(GMT-06:00)</TimeZone><iJoin>1</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL </OEMID><OEMTableID>FX09
</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product GUID="{90120000-0011-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft
Office Professional Plus 2007</Name><Ver>12</Ver><Val>1208E0A87E81D86</Val><Hash>FlQRxKwAwaRad03SQZkKxNggIRU=</Hash><Pid>89409-707-0082056-65245</Pid><PidType>14</PidType></Product></Products><Applications><App
Id="15" Version="12" Result="100"/><App Id="16" Version="12" Result="100"/><App Id="18" Version="12" Result="100"/><App Id="19" Version="12"
Result="100"/><App Id="1A" Version="12" Result="100"/><App Id="1B" Version="12" Result="100"/><App Id="44" Version="12" Result="100"/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Professional edition
Description: Windows Operating System - Windows(R) 7, VOLUME_KMSCLIENT channel
Activation ID: b92e9980-b9d5-4821-9c94-140f632f6312
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00170-868-000000-03-1033-7601.0000-2092014
Installation ID: 011751536521019726056115618440708701492313365893152065
Partial Product Key: GPDD4
License Status: Initial grace period
Time remaining: 43200 minute(s) (30 day(s))
Remaining Windows rearm count: 1
Trusted time: 7/28/2014 9:31:36 AM
Please use slmgr.vbs /ato to activate and update KMS client information in order to update values.
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C533
HealthStatus: 0x0000000000000000
Event Time Stamp: 6:23:2014 07:16
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: MgAAAAEABAABAAEAAAACAAAAAQABAAEAJJRe04hAjl+cEVTyEDPMabbK6kXsLQilArQ=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: no, invalid Windows marker
Windows marker version: N/A
OEMID and OEMTableID Consistent: N/A
BIOS Information:
ACPI Table Name OEMID Value
OEMTableID Value
APIC DELL
FX09
FACP DELL
FX09
HPET DELL
OEMHPET
MCFG DELL
OEMMCFG
SLIC DELL
FX09
OSFR DELL
FX09
OEMB DELL
FX09
SSDT A M I
POWERNOW
================================
Windows 7 Pro was installed on this machine using Microsoft's volume activation media, and is a standard image applied via Windows Deployment Services to some 200 other computers with no problems.
We also use a variety of surplus/off-lease machines, usually Dell brand, never with any activation problems.It's a Dell Inspiron desktop. Apparently a "for the home" system? Yet it was bought with Win 7 Pro OEM installed, and so I had hoped I could roll it into the KMS easily. Tried updating the BIOS but still acts the same.
How can a "home edition" BIOS that's incompatible with KMS come with Win 7 Pro OEM?
Oddly, we have several Dell XPS systems that are using KMS just fine. Those are almost exclusively marketed as "power gamer" systems for home use. I should see if there's some way to figure out which specific Dell products do this so they can be avoided.
Fortunately it seems Windows 7 Pro edition software does not care if I use the OEM key from the sticker, so I typed that in and it activated.
(Great, one weird machine that has to be treated specially from everything else we've got.)
Probably a question for Dell to answer. For whatever reason, Dell have not performed all the necessary OEM Activation (OA) configuration tasks on this machine, perhaps due to their manufacturing/marketing strategy for this model, or perhaps due to a defective
configuration pass in the factory. Perhaps the mainboard in this machine was repaired or replaced at some stage, and wasn't correctly re-configured. Only Dell can resolve the missing marker, since it requires OEM tools.
Activating using the COA sticker product key, doesn't depend on the marker being present.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Connect a Client Computer Not Working At All
I have a new Windows 7 clean install with updates that is not able to connect to SBS 2011 at all.
In the past (about 2 years ago) I ran into the same problem and by following the simple steps outlined here - http://blog.ronnypot.nl/?p=594 - it worked no problem. Now it does not help at all.
For a test, I took a spare machine and did a clean install of SBS 2011, applied the updates (except NET 4.5.1). When I tried to connect the new Windows 7 machine to the new SBS 2011 machine - this also has failed.Server's ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : BLAH-1
Primary Dns Suffix . . . . . . . : BLAH.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : BLAH.local
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : BLAH.local
Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Controller
Physical Address. . . . . . . . . : REMOVED
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : REMOVED (Preferred)
Link-local IPv6 Address . . . . . : REMOVED (Preferred)
Link-local IPv6 Address . . . . . : REMOVED (Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.12(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : REMOVED
192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : REMOVED
DHCPv6 Client DUID. . . . . . . . : REMOVED
DNS Servers . . . . . . . . . . . : REMOVED
192.168.1.12
NetBIOS over Tcpip. . . . . . . . : Enabled
Connection-specific DNS Suffix Search List :
BLAH.local
Tunnel adapter isatap.{REMOVED}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : BLAH.local
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Workstation's ipconifg /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : BLAH-1
Primary Dns Suffix . . . . . . . : BLAH.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : BLAH.local
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : aspa2.local
Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Controller
Physical Address. . . . . . . . . : REMOVED
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : REMOVED (Preferred)
Link-local IPv6 Address . . . . . : REMOVED (Preferred)
Link-local IPv6 Address . . . . . : REMOVED (Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.12(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : REMOVED
192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : REMOVED
DHCPv6 Client DUID. . . . . . . . : REMOVED
DNS Servers . . . . . . . . . . . : REMOVED
192.168.1.12
NetBIOS over Tcpip. . . . . . . . : Enabled
Connection-specific DNS Suffix Search List :
BLAH.local
Tunnel adapter isatap.{REMOVED}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : BLAH.local
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
HCI3 - I tried the steps you have listed and it did not work. -
SOAP Axis adapter_Encryption via Client Certificate not working
Dear Experts,
Could anyone please share the steps to enable encryption via client certificate in SOAP AXIS receiver adapter.
I am able to do the same using normal SOAP adapter but with AXIS framework the steps are not working.
I have come across few sdn links to configure axis framework for authentication using wsse security standard but this seems to be different as it requires user and password whereas with certificates we are not given any user/password.
Please provide some valuable inputs.
Thanks.Hi Shikha,
see the -
Advanced Usage Questions
8. How can I configure a channel to use the encryption and ....
of the FAQ attached to the note -
1039369 - FAQ XI Axis Adapter
Regards
Kenny -
Document library open in client application not working for img,pdf,txt files
In an office 365 sharepoint site i have enabled open in client applicartion for document library but it is not working for image/txt/pdf files for word and excel files it is working fine. I have even turned on the feature open document in client application
by default from site collection features also but there is no change.
Please advice.
Regards,
ChaitanyaHi Chaitanya,
The feature is currently designed to be used with HTTPS, and will not work as expected with the HTTP connection available on Office 365 for professionals and
small businesses sites.
To take advantage of this update, do the following steps:
Wait for the update to the SharePoint Online service, which is in progress now.
Upgrade Adobe Reader to the version 10.1.2 client.
Add your SharePoint Online root URL/domain to the Trusted Sites security zone in Internet Explorer1 (e.g.,
https://contoso.sharepoint.com).
Check the Keep me signed in box when you log in to a SharePoint Online site.
This
SharePoint Online update is currently
being rolled out worldwide along with several other new features.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Font Auto-Activation Not Working After First Use
Anyone else seeing this problem, or have a fix? Font auto-activation stops working after the first use. Here's what happens: Open a file that contains a font that is installed, but is disabled in Font Book. The dialog box "Application wants to use the font XXX". Click on Allow. The font will be available, as you expect. Now quit the application. Open the file again - you won't get the dialog box asking permission to use the font, and the font is not available. This happens in Pages 3.0.1 and TextEdit 1.5. It happens for each individual font - in other words, continuing my description, if you now open a second file that has another font that is disabled in Font Book, you'll be asked permission to use it. But once you've allowed a particular font to be used, you won't be asked permission again.
Make a backup. Restore the device as new. Test the issue again. If it persists, your device needs service. If the issue disappears, restore your backup. If it then reappears, then there is some form of corrupt data on the device from the backup. You'll have to restore that data one portion at a time to determine what is causing it, or set up the device as new.
-
Java FTP client do not work in Solaris 10
We just upgrade our Solaris 8.0 system to Solaris10. A java FTP client don't work anymore when I try to download a remote file. It worked nicely in Solaris8. Specifically, this java program is using JDK FtpClient, the command that downloading a file is something like this:
TelnetInputStream in = ftpClient.get(remotefilename);
However, I still can send a file to a remote machine. Anyone knows this?
Thnak you very much!Hello Community,
the problem is solved. The VM on the workstation is very slow. The Java EE server use more than one hour to start. No problem with the hardware key or anything else, only a problem of my patience. It seems that the configuration file of the VM stores special entrys of the basic physical machine to run optimal. And which is optimal for the notebook is not optimal for the workstation.
Cheers
Stefan
Edited by: Stefan Schnell on Mar 4, 2008 2:10 PM -
Client variables not working in Apache and CF8
I have Apache and CF8 set up with multiple virtual hosts
locally for development(win xp pro, apache 2.2.4)
Client variables are not working. I can log into CF
administrator fine(not sure if authentication uses client variables
or not). Any site that I work on that uses client variables behaves
as if the variable is not defined after setting it then going to
another page that checks for its existence. I have verified that
client variables are set up in cf administrator.
Thanks for any helpThanks a lot. I understood the mistake. Pls do not spend time on this.
Thanks,
Swarna -
Windows 8.1 OEM Activation not working anymore ?
Hello,
After asking here on the forum about restoring a deleted partition which question has been solved. We run into another problem.
My sister recently infected the Laptop at a point it became UNUSABLE! The HDD kept filling up, She had over 400GB remaining (girls stuff, unlike guys, they don't download many stuff); but suddenly the HDD filled up from 400GB remaining to 5GB
And...the computer is VERY SLOW at start, it used to take just few seconds to boot, but it took almost 5 minutes to boot when it was infected. We tried many antivirus softwares, the laptop came with a preinstalled one (can't remember which one), beside this, we tried Kaspersky, Avira, Avast, Eset and other Antivirus softwares.
Most of them failed to scan C:/ Drive with a error message such as "unable to scan drive c".
So our best option was to reeinstall the system.
I firstly backep up the OEM Activation Keys (supposedly encrypted in the BIOS). I found useful tutorials online which allowed me to show which activation key is beinf used, so I just copied it in a safe place just in cas somthing go wrong. I didn't use a thirdparty software to display the key! Just Windows tools. A thirdparty application can't be VERY trustfull in term of Licence Keys.
I then downloaded a guenuine Windows 8.1 Pro from MSDN website with a product key.
The installation went flawlessly but when I restarted I noticed Windows Wasn't activated!
I then tried to use the earlier backed up key, sadly it didn't work, windows said that I can't use this key with this edition of windows.
My questions are:
- Can someone tell me WHY can't I use the OEM Activation on all windows edition ?
- Is there any way to get it working on all editions anyways ?
- Will a full reinstallation of Windows 8.1 Non-Pro version be activated automatically by the BIOS ?
- If I buy an activation key for windows 8.1 pro, will this key somehow interfere with the one in the BIOS ?
This question was solved.
View Solution.My questions are:
1 - Can someone tell me WHY can't I use the OEM Activation on all windows edition ?
2 - Is there any way to get it working on all editions anyways ?
3 - Will a full reinstallation of Windows 8.1 Non-Pro version be activated automatically by the BIOS ?
4 - If I buy an activation key for windows 8.1 pro, will this key somehow interfere with the one in the BIOS ?
1. No it works only for that version that is made for Preminum for Preminum not Preminum for Professional that is a different Product Key.
2. No, You will have to buy each O/S with different Product Key to activiate them
3. No, If that O/S doesn't match the Product Key for the previous O/S it will not work or activiate giving you only 30day trial.
4. No, it will not interfere it will though ask for the new Product Key from the Windows 8.1 Pro to activiate it.
So Product Keys are not tranferrable with the exception that if the replacement Windows Retail matches the previous Product Key Windows O/S version will permit the installation and comes the possiblity that you will have to reactiviate online to verify the Product key to get the O/S working.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015- -
Cisco 1841 as PPTP client Does not work
Dear All,
I have Cisco 1841 router running the below roles
1) SSL VPN Server
2) PPTP Server
3) Site to Site Connection with Sonicwall router
I want the router to be configured a pptp client to internet vpn server (so that i will get a fixed public ip )
Once i get this ip address i want to use this connection to accept in coming connection and forward ports to internal host,
I went through below
http://www.mreji.eu/content/cisco-router-pptp-client
https://supportforums.cisco.com/thread/2167562
But it does not work as i do not have the option for the below 2 commands in vpdn-group 2 section.(Please see section in blue)
protocol pptp
rotary-group 4
Please Advise and Help
Regards
Hasan Reza
My Current Config is as below
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.06.09 17:55:23 =~=~=~=~=~=~=~=~=~=~=~=
exit
Gateway#show run |
Building configuration...
Current configuration : 25109 bytes
! Last configuration change at 13:33:57 UTC Sun Jun 9 2013 by admin
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname Gateway
boot-start-marker
boot system flash c1841-advsecurityk9-mz.151-2.T1.bin
boot-end-marker
logging buffered 4096
no logging console
enable secret 5 $1$SciF$TlX1tR5qaG9ZE7pdZHcRJ/
no aaa new-model
dot11 syslog
ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 10.236.5.1 10.236.5.20
ip dhcp excluded-address 10.236.5.21 10.236.5.50
ip dhcp excluded-address 172.21.51.2 172.21.51.50
ip dhcp pool ContosoPool
network 10.236.5.0 255.255.255.0
default-router 10.236.5.254
dns-server 213.42.20.20 195.229.241.222
ip dhcp pool DMZ
network 172.21.51.0 255.255.255.0
dns-server 172.21.51.10
default-router 172.21.51.1
domain-name contoso.local
ip cef
ip domain name contoso.local
ip name-server 213.42.20.20
ip name-server 195.229.241.22
ip name-server 195.229.241.222
ip ddns update method dyndns
HTTP
add http://xxxxxx:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
remove http://xxxxxx:yyyyy@@members.dyndns.org/nic/update?system=dyndns&hostname=<h>&myip=<a>
interval maximum 0 1 0 0
multilink bundle-name authenticated
vpdn enable
vpdn-group 2
request-dialin
protocol l2tp
initiate-to ip 173.195.0.42
vpdn-group RAS-VPN
! Default PPTP VPDN group
accept-dialin
protocol pptp
virtual-template 1
l2tp tunnel timeout no-session 15
crypto pki token default removal timeout 0
crypto pki trustpoint TP.StartSSL.CA
enrollment terminal pem
revocation-check none
crypto pki trustpoint TP.StartSSL-vpn
enrollment terminal pem
usage ssl-server
serial-number none
fqdn ssl.spktelecom.com
ip-address none
revocation-check crl
rsakeypair RSA.StartSSL-vpn
crypto pki trustpoint TP-self-signed-1981248591
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1981248591
revocation-check none
rsakeypair TP-self-signed-1981248591
crypto pki trustpoint VMWare
enrollment terminal
revocation-check crl
crypto pki trustpoint OWA
enrollment terminal pem
revocation-check crl
crypto pki certificate chain TP.StartSSL.CA
certificate ca 01
(removed the certificate info for clarity)
quit
crypto pki certificate chain TP.StartSSL-vpn
certificate 0936E1
(removed the certificate info for clarity)9
quit
certificate ca 18
(removed the certificate info for clarity)
quit
crypto pki certificate chain TP-self-signed-1981248591
certificate self-signed 01
(removed the certificate info for clarity)
quit
crypto pki certificate chain VMWare
certificate ca 008EDCE6DBCE6B
(removed the certificate info for clarity)
quit
crypto pki certificate chain OWA
(removed the certificate info for clarity)
license udi pid CISCO1841 sn FCZ122191TW
archive
log config
hidekeys
username admin privilege 15 password 7 1304131F02023B7B7977
username ali password 7 06070328
redundancy
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
lifetime 84000
crypto isakmp key admin_123 address 0.0.0.0 0.0.0.0
crypto isakmp keepalive 10
crypto ipsec security-association lifetime seconds 28800
crypto ipsec transform-set vpnset esp-3des esp-sha-hmac
crypto ipsec transform-set strongsha esp-3des esp-sha-hmac
crypto dynamic-map mydyn 10
set transform-set strongsha
crypto map Dxb-Auh 1000 ipsec-isakmp dynamic XXXXXXXXXX
interface FastEthernet0/0
description Internal Network (Protected Interface)
ip address 10.236.5.254 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface FastEthernet0/1
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface ATM0/0/0
no ip address
shutdown
no atm ilmi-keepalive
interface BRI0/1/0
no ip address
encapsulation hdlc
shutdown
interface Virtual-Template1
ip unnumbered Dialer1
peer default ip address dhcp-pool ContosoPool
ppp encrypt mppe auto required
ppp authentication ms-chap ms-chap-v2 eap
interface Dialer1
ip ddns update hostname XXXXXXX.dyndns.org
ip ddns update dyndns
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
ip tcp adjust-mss 1450
dialer pool 1
ppp pap sent-username vermam password 7 13044E155E0913323B
crypto map Dxb-Auh
interface Dialer2
mtu 1460
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer in-band
dialer idle-timeout 0
dialer string 123
dialer vpdn
dialer-group 2
ppp pfc local request
ppp pfc remote apply
ppp encrypt mppe auto
ppp authentication ms-chap ms-chap-v2 callin
ppp eap refuse
ppp chap hostname hasanreza
ppp chap password 7 070E2541470726544541
interface Dialer995
no ip address
ip local pool webssl 10.236.6.10 10.236.6.30
ip forward-protocol nd
ip http server
ip http secure-server
ip nat inside source list nat interface Dialer1 overload
ip nat inside source static tcp 10.236.5.12 25 interface Dialer1 25
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 172.21.51.0 255.255.255.0 10.236.5.253
ip access-list extended internal
permit ip any 10.236.5.0 0.0.0.255
ip access-list extended nat
deny ip 10.236.5.0 0.0.0.255 172.31.1.0 0.0.0.255
deny ip 10.236.5.0 0.0.0.255 172.19.19.0 0.0.0.255
permit ip 10.236.5.0 0.0.0.255 any
ip access-list extended nonat
permit ip 10.236.5.0 0.0.0.255 172.19.19.0 0.0.0.255
permit ip 10.236.5.0 0.0.0.255 172.31.1.0 0.0.0.255
ip access-list extended sslacl
ip access-list extended webvpn
permit tcp any any eq 443
logging esm config
access-list 101 permit ip 10.236.5.0 0.0.0.255 172.31.1.0 0.0.0.255
control-plane
line con 0
line aux 0
line vty 0 4
exec-timeout 0 0
login local
transport preferred ssh
transport input telnet ssh
line vty 5 15
exec-timeout 0 0
login local
transport preferred ssh
transport input telnet ssh
scheduler allocate 20000 1000
webvpn gateway gateway1
ip interface Dialer1 port 443
ssl encryption rc4-md5
ssl trustpoint TP.StartSSL-vpn
inservice
webvpn install svc flash:/webvpn/anyconnect-win-3.1.00495-k9.pkg sequence 1
webvpn install csd flash:/webvpn/sdesktop.pkg
webvpn context webvpn
ssl authenticate verify all
url-list "Webservers"
heading "SimpleIT Technologies NBNS Servers"
url-text "Google" url-value "www.google.com"
url-text "Mainframe" url-value "10.236.5.2"
url-text "Mainframe2" url-value "https://10.236.5.2"
nbns-list "ContosoServer"
nbns-server 10.236.5.10
nbns-server 10.236.5.11
nbns-server 10.236.5.12
port-forward "PortForwarding"
local-port 3389 remote-server "10.236.5.10" remote-port 3389 description "Server-DC01"
policy group policy1
url-list "Webservers"
port-forward "PortForwarding"
nbns-list "ContosoServer"
functions file-access
functions file-browse
functions file-entry
functions svc-enabled
svc address-pool "webssl"
svc default-domain "Contoso.Local"
svc keep-client-installed
svc split include 10.236.5.0 255.255.255.0
svc split include 10.236.6.0 255.255.255.0
svc split include 172.31.1.0 255.255.255.0
svc split include 172.21.51.0 255.255.255.0
svc dns-server primary 172.21.51.10
default-group-policy policy1
gateway gateway1
inservice
end
Gateway#Dear All,
I have Cisco 1841 router running the below roles
1) SSL VPN Server
2) PPTP Server
3) Site to Site Connection with Sonicwall router
I want the router to be configured a pptp client to internet vpn server (so that i will get a fixed public ip )
Once i get this ip address i want to use this connection to accept in coming connection and forward ports to internal host,
I went through below
http://www.mreji.eu/content/cisco-router-pptp-client
https://supportforums.cisco.com/thread/2167562
But it does not work as i do not have the option for the below 2 commands in vpdn-group 2 section.(Please see section in blue)
protocol pptp
rotary-group 4
Please Advise and Help
Regards
Hasan Reza
My Current Config is as below
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.06.09 17:55:23 =~=~=~=~=~=~=~=~=~=~=~=
exit
Gateway#show run |
Building configuration...
Current configuration : 25109 bytes
! Last configuration change at 13:33:57 UTC Sun Jun 9 2013 by admin
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname Gateway
boot-start-marker
boot system flash c1841-advsecurityk9-mz.151-2.T1.bin
boot-end-marker
logging buffered 4096
no logging console
enable secret 5 $1$SciF$TlX1tR5qaG9ZE7pdZHcRJ/
no aaa new-model
dot11 syslog
ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 10.236.5.1 10.236.5.20
ip dhcp excluded-address 10.236.5.21 10.236.5.50
ip dhcp excluded-address 172.21.51.2 172.21.51.50
ip dhcp pool ContosoPool
network 10.236.5.0 255.255.255.0
default-router 10.236.5.254
dns-server 213.42.20.20 195.229.241.222
ip dhcp pool DMZ
network 172.21.51.0 255.255.255.0
dns-server 172.21.51.10
default-router 172.21.51.1
domain-name contoso.local
ip cef
ip domain name contoso.local
ip name-server 213.42.20.20
ip name-server 195.229.241.22
ip name-server 195.229.241.222
ip ddns update method dyndns
HTTP
add http://xxxxxx:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
remove http://xxxxxx:yyyyy@@members.dyndns.org/nic/update?system=dyndns&hostname=<h>&myip=<a>
interval maximum 0 1 0 0
multilink bundle-name authenticated
vpdn enable
vpdn-group 2
request-dialin
protocol l2tp
initiate-to ip 173.195.0.42
vpdn-group RAS-VPN
! Default PPTP VPDN group
accept-dialin
protocol pptp
virtual-template 1
l2tp tunnel timeout no-session 15
crypto pki token default removal timeout 0
crypto pki trustpoint TP.StartSSL.CA
enrollment terminal pem
revocation-check none
crypto pki trustpoint TP.StartSSL-vpn
enrollment terminal pem
usage ssl-server
serial-number none
fqdn ssl.spktelecom.com
ip-address none
revocation-check crl
rsakeypair RSA.StartSSL-vpn
crypto pki trustpoint TP-self-signed-1981248591
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1981248591
revocation-check none
rsakeypair TP-self-signed-1981248591
crypto pki trustpoint VMWare
enrollment terminal
revocation-check crl
crypto pki trustpoint OWA
enrollment terminal pem
revocation-check crl
crypto pki certificate chain TP.StartSSL.CA
certificate ca 01
(removed the certificate info for clarity)
quit
crypto pki certificate chain TP.StartSSL-vpn
certificate 0936E1
(removed the certificate info for clarity)9
quit
certificate ca 18
(removed the certificate info for clarity)
quit
crypto pki certificate chain TP-self-signed-1981248591
certificate self-signed 01
(removed the certificate info for clarity)
quit
crypto pki certificate chain VMWare
certificate ca 008EDCE6DBCE6B
(removed the certificate info for clarity)
quit
crypto pki certificate chain OWA
(removed the certificate info for clarity)
license udi pid CISCO1841 sn FCZ122191TW
archive
log config
hidekeys
username admin privilege 15 password 7 1304131F02023B7B7977
username ali password 7 06070328
redundancy
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
lifetime 84000
crypto isakmp key admin_123 address 0.0.0.0 0.0.0.0
crypto isakmp keepalive 10
crypto ipsec security-association lifetime seconds 28800
crypto ipsec transform-set vpnset esp-3des esp-sha-hmac
crypto ipsec transform-set strongsha esp-3des esp-sha-hmac
crypto dynamic-map mydyn 10
set transform-set strongsha
crypto map Dxb-Auh 1000 ipsec-isakmp dynamic XXXXXXXXXX
interface FastEthernet0/0
description Internal Network (Protected Interface)
ip address 10.236.5.254 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface FastEthernet0/1
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface ATM0/0/0
no ip address
shutdown
no atm ilmi-keepalive
interface BRI0/1/0
no ip address
encapsulation hdlc
shutdown
interface Virtual-Template1
ip unnumbered Dialer1
peer default ip address dhcp-pool ContosoPool
ppp encrypt mppe auto required
ppp authentication ms-chap ms-chap-v2 eap
interface Dialer1
ip ddns update hostname XXXXXXX.dyndns.org
ip ddns update dyndns
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
ip tcp adjust-mss 1450
dialer pool 1
ppp pap sent-username vermam password 7 13044E155E0913323B
crypto map Dxb-Auh
interface Dialer2
mtu 1460
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer in-band
dialer idle-timeout 0
dialer string 123
dialer vpdn
dialer-group 2
ppp pfc local request
ppp pfc remote apply
ppp encrypt mppe auto
ppp authentication ms-chap ms-chap-v2 callin
ppp eap refuse
ppp chap hostname hasanreza
ppp chap password 7 070E2541470726544541
interface Dialer995
no ip address
ip local pool webssl 10.236.6.10 10.236.6.30
ip forward-protocol nd
ip http server
ip http secure-server
ip nat inside source list nat interface Dialer1 overload
ip nat inside source static tcp 10.236.5.12 25 interface Dialer1 25
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 172.21.51.0 255.255.255.0 10.236.5.253
ip access-list extended internal
permit ip any 10.236.5.0 0.0.0.255
ip access-list extended nat
deny ip 10.236.5.0 0.0.0.255 172.31.1.0 0.0.0.255
deny ip 10.236.5.0 0.0.0.255 172.19.19.0 0.0.0.255
permit ip 10.236.5.0 0.0.0.255 any
ip access-list extended nonat
permit ip 10.236.5.0 0.0.0.255 172.19.19.0 0.0.0.255
permit ip 10.236.5.0 0.0.0.255 172.31.1.0 0.0.0.255
ip access-list extended sslacl
ip access-list extended webvpn
permit tcp any any eq 443
logging esm config
access-list 101 permit ip 10.236.5.0 0.0.0.255 172.31.1.0 0.0.0.255
control-plane
line con 0
line aux 0
line vty 0 4
exec-timeout 0 0
login local
transport preferred ssh
transport input telnet ssh
line vty 5 15
exec-timeout 0 0
login local
transport preferred ssh
transport input telnet ssh
scheduler allocate 20000 1000
webvpn gateway gateway1
ip interface Dialer1 port 443
ssl encryption rc4-md5
ssl trustpoint TP.StartSSL-vpn
inservice
webvpn install svc flash:/webvpn/anyconnect-win-3.1.00495-k9.pkg sequence 1
webvpn install csd flash:/webvpn/sdesktop.pkg
webvpn context webvpn
ssl authenticate verify all
url-list "Webservers"
heading "SimpleIT Technologies NBNS Servers"
url-text "Google" url-value "www.google.com"
url-text "Mainframe" url-value "10.236.5.2"
url-text "Mainframe2" url-value "https://10.236.5.2"
nbns-list "ContosoServer"
nbns-server 10.236.5.10
nbns-server 10.236.5.11
nbns-server 10.236.5.12
port-forward "PortForwarding"
local-port 3389 remote-server "10.236.5.10" remote-port 3389 description "Server-DC01"
policy group policy1
url-list "Webservers"
port-forward "PortForwarding"
nbns-list "ContosoServer"
functions file-access
functions file-browse
functions file-entry
functions svc-enabled
svc address-pool "webssl"
svc default-domain "Contoso.Local"
svc keep-client-installed
svc split include 10.236.5.0 255.255.255.0
svc split include 10.236.6.0 255.255.255.0
svc split include 172.31.1.0 255.255.255.0
svc split include 172.21.51.0 255.255.255.0
svc dns-server primary 172.21.51.10
default-group-policy policy1
gateway gateway1
inservice
end
Gateway#
Maybe you are looking for
-
Good Afternoon Gentlemen, I need your help understanding what's involved on a upgrade we need to perform. Right now we have a SAP ECC 6.0 with the following components: SAP_BASIS 701 0012 SAPKB70112 SAP_ABA 701
-
Differences operating Canon Pro-10 Wirelessly vs USB connected
To test my new Canon Pro-10 I connected it via USB last night and printed with it. The Quick Menu was "complete" with all the bells and whistles showing in the "corner" box. When I printed it offered me many options for Quality and Media -- various
-
E4200 as a Access Point/Bridge Mode
I have spent most of the weekend trying to get this router to act as a proper Access Point. Has any got this to work correctly? When it does work (Stay connected) speeds and latency are rotten. If I go back to Routing Mode this thing kicks butt, but
-
Hi all, my question is the following. I had a screen with input fields. If you press ENTER the PAI will run. There is a SAVE button on the screen as well. I want that the PAI only run if I press this button, and not running if you press ENTER. In the
-
Heterogenous Backup/Restore (HPUX to Windows)
Dear all, Is there a possibility to backup a SAPDB 7.3 database on HPUX and restore to a windows 2003 Server (32Bit)? I tried this while a migration of an old SAP Content-Server but the restore aborts with the following message: dbmcli on MFK>util_ex