Kodo support for Pointbase Micro
I notice that the documentation mentions support for Pointbase 4.2
Pointbase JDBC driver 4.2. I also notice that Pointbase Micro uses "a
subset of JDBC as the API". Is there any hope that Kodo JDO would work
with Pointbase Micro, or is this a lost cause?
Cheers,
Cameron Ross.
Cameron-
Pointbase Micro has 2 different APIs: one normal JDBC one, and the
"Lite" one. The former may very well work with Kodo. It is untested, but
since Pointbase Embedded is supported by Kodo, so there is a good chance
that it will work fine.
The "Lite" API (which is designed for the CDC) will not work with Kodo,
because it is not actually a JDBC implementation, but a "JDBC-like" API.
We are investigating providing Kodo support for J2ME in the future. If
you have any questions or needs concerning this support, please share it
with us at [email protected]
In article <b1ul8e$iqm$[email protected]>, Cameron Ross wrote:
I notice that the documentation mentions support for Pointbase 4.2
Pointbase JDBC driver 4.2. I also notice that Pointbase Micro uses "a
subset of JDBC as the API". Is there any hope that Kodo JDO would work
with Pointbase Micro, or is this a lost cause?
Cheers,
Cameron Ross.
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com
Similar Messages
-
No ext4 support for the micro SD
I have a 64GB micro SD card that I formatted to ext4 and works without any problem in my LG GPad 8.3 Android 4 tablet and Linux computer.
I tried it in my Z1C, but it tells me the SD is damaged.
When is Sony going to add ext4 support for the micro SD port?
It can't be that hard, as Android is based on Linux and Linux has support for ext4 for several years now.As far as I know,only exFAT is supported for now.Contact xperia care for more info:
http://www.sonymobile.com/global-en/support/contact-us/
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien -
RAW support for new micro 4/3 Panasonic GF-1
Hi everyone, I've just preordered my copy of the new micro 4/3 Panasonic GF-1! I've sent in my feedback request for the RAW format to be supported by Aperture and thought it would be good to start a thread here to get the popular vote going!
I assume it will be easier than the LX3 since that little camera had serious barrel distortion issues that had to be corrected in the RAW conversion (and doubtless that it was a difficult thing for Aperture to be able to support that). With this camera there are no such issues.
http://www2.panasonic.com/consumer-electronics/shop/Cameras-Camcorders/Digital-C ameras/Lumix-Digital-Interchangeable-Lens-Cameras/model.DMC-GF1C-K110027000000000000005702hey..it's been more then 2 years since canon changed their tethering protocol and apple still hasn't gotten around to working out a solution.....but i guess that makes sense since that only afects every canon dslr sold int he last 2 years.....that is not that many....
on the other hand, maybe you should wait for the camera to actually be released and available to ask for raw support? apple is usually the last of the raw converters to support new cameras.....but imo it is always worth the wait.... -
NAC Support for Trend Micro Office Scan 10
Hi Guys,
Does any one know when will Trend Micro Office Scan 10 be supported on NAC?
Regards,
AdrianAdrian,
If you are running the 4.8.0 NAC Agent we should be releasing a new compliance module within the next week or so. I am not sure what AV software will be added but there is a good chance this will in in that compliance module update.
--Jesse -
AUDIBLE SUPPORT FOR MICRO WHEN???
What is wrong with Creative, and not giving audible support of the creative micro. Is there any plan at all? Creative, why are you limiting the capabilities of you MP3 player? Why are you depriving your customer of have access to Audible audiobooks support? WHEN ARE YOU GOING TO HAVE AUDIBLE SUPPORT FOR CREATIVE MICRO?
It may be true that Creative did not advertise Audible support with the Zen Micro, but some of its retail partners did. Crutchfield had a special sale with a $00 discount toward a Zen Micro after subscriibing to Audible.com. Also, the main competition for the Micro is the iPod Mini, and it fully supports Audible files. I would think Creative would want to eliminate that competiti've advantage before too many people realize the only choice is to go to an iPod if they are Audible subscribers. I can't believe there is a technological barrier here, so it must be a licensing issue with Audible and other content providers such as Napster and Music Match. Why else would Creative leave us in the learch?
Without any hope that Creative intends to provide Audible support, I think it is time to put my Micro up for sale on e-Bay switch to an iPod Mini. Apple got where it is by listening to its customers... -
New in Kodo 3.3.3: Improved support for Java 5 enums and generics?
Hello,
Can anybody tell me if Kodo 3.3.3 can be deployed on WebLogic 8.1 sp4, jdk
1.4.1? The reason I ask this is because one of the features mentioned for
v3.3.3 is the support for Java 5 generics, which is available on WebLogic
9 -- but not in WebLogic 8.1 sp4. The documentation for Kodo 3.3.3 seems
to indicate that it can be deployed on WebLogic 8.1 -- can anyone tell me
if this is accurate?
Thanks for your help!Correction:
I think that my question may have been misunderstood. What I want to know
is if Kodo 3.3.3 can be deployed on WebLogic 8.1sp4 which is running JDK
1.4 or do I have to deploy on a newer version of WebLogic that is running
Java 5?
Thanks!
Rita wrote:
I think that my question may have been misunderstood. What I want to know
is if Kodo 3.3.3 can be deployed on WebLogic 8.1sp4 which is running JDK
1.4 or do I have to deploy on a newer version of WebLogic that is running
Java 4?
Thanks!
Stephen Kim wrote:
Rita,
While Kodo 3.3.x can work with JDK 5, it cannot make WL work with JDK 5.
However, Kodo 3.4 RC 3 / 4.0 EA 2 both can work with WL 9 (which works
with JDK 5).
Rita wrote:
Hello,
Can anybody tell me if Kodo 3.3.3 can be deployed on WebLogic 8.1 sp4,
jdk
1.4.1? The reason I ask this is because one of the features mentionedfor
v3.3.3 is the support for Java 5 generics, which is available on WebLogic
9 -- but not in WebLogic 8.1 sp4. The documentation for Kodo 3.3.3 seems
to indicate that it can be deployed on WebLogic 8.1 -- can anyone tell me
if this is accurate?
Thanks for your help!
Steve Kim
[email protected]
SolarMetric Inc.
http://www.solarmetric.com -
DRM 10 Support Announced for Zen Micro
The announcement says that it'll be available this quarter
http://www.microsoft.com/presspass/p...sForSurePR.asp
Creative announced its Zen Micro now has updated firmware to support PlaysForSure including support for Auto Sync and Playlists using Windows Media Player 0 as well as online music stores. Additional updates that include support for PlaysForSure online music subscription services using Windows Media DRM 0 will be forthcoming for the Zen Micro, Zen Touch and Zen Xtra players, and be available in the first quarter of 2005.
Message Edited by BJWall on 0-06-2005 07:55 AMThanks for letting us know, although Microsoft did say MTP support was coming for the Touch and the Xtra in November
-
Any news on support for the new Zen Micro using Napster ?
It tends to be Creative policy not to give dates or future features until they are actually complete and the firmware is ready for download.
-
New accessories for Zen micro? New firmwa
i'm most likely gonna buy the zen micro tonight. i figure that it is creative's new "flagship" model so that means its prob. gonna get the most firmware, acc., and most support. if anyone has a reason i shouldnt get it let me know, i've read all the stuff about freezes and everything, but i'm sure by christmas there will be plenty of firmware for all these probs. hopefully lol. also, are there any 3rd party accessories for the micro, like skins or cases or anything? any new firmware about to be realeased?
In Japan, the remote comes with the Zen Micro (still doesn't justify the $80 dollar price increase!!). I tried using the remote and found it to be a waste. I wouldn't bother buying it. When I am wearing a jacket I put the Micro in my jacket breast or side pocket. When I am not wearing a jacket, I use the case and belt clip.
Unless you make massi'vely long playlists and would thus keep the Micro in your bag for LONG periods of time, the remote is essentially useless. It only has volume, puase, play, and next track controls, and no display of course.
Just my thoughts on the remote. The clip sucks on the remote too. It's too small to clip to the strap on my bag securely.
Jason -
Support for "Interface Based Design"
I would like two PC classes that implement a common interface, but the two
PC classes are not related by inheritance, and would not be stored in the
same table. For example,
public interface VersionNumber {
int getNumber();
boolean isComparableTo( VersionNumber vn );
/** PC class **/
public class BasicVersionNumber implements VersionNumber {
/** PC class **/
public class CustomVersionNumber implements VersionNumber {
/** PC class **/
public class Paper {
VersionNumber vn;
Since "BasicVersionNumber" and "CustomVersionNumber" are not related via
inheritance, they would not generally reside in the same database table.
It would mean that the table containing "Paper" would need both the target
table for this instance of "vn", and the primary key for "vn". It appears
that KODO assumes the target table is available in the Meta-Data file, but
with interface-based design, that is not known until run time and could be
different for different instances of class "Paper".
Is it possible to do this with KODO? Where can I go to understand how.
Keith L. Musser
Integrated Dynamics, Inc.
812-371-7777
email: [email protected]
Disclaimer - This email, and any files transmitted with it, are confidential
and may contain privileged or copyright information. If you are not the
intended recipient you must not copy, distribute or use this email, or the
information contained herein, for any purpose other than to notify us. If
you received this email in error, please notify the sender immediately, and
delete this email from your system.Kodo supports interfaces as fields (in Kodo 3, we support interfaces for
more relation types). Kodo will store the toString () of the JDO
identity for the actual concrete instance in the column as there is no
formal O/R relation between the table and the interface field type.
Keith Musser wrote:
I would like two PC classes that implement a common interface, but the two
PC classes are not related by inheritance, and would not be stored in the
same table. For example,
public interface VersionNumber {
int getNumber();
boolean isComparableTo( VersionNumber vn );
/** PC class **/
public class BasicVersionNumber implements VersionNumber {
/** PC class **/
public class CustomVersionNumber implements VersionNumber {
/** PC class **/
public class Paper {
VersionNumber vn;
Since "BasicVersionNumber" and "CustomVersionNumber" are not related via
inheritance, they would not generally reside in the same database table.
It would mean that the table containing "Paper" would need both the target
table for this instance of "vn", and the primary key for "vn". It appears
that KODO assumes the target table is available in the Meta-Data file, but
with interface-based design, that is not known until run time and could be
different for different instances of class "Paper".
Is it possible to do this with KODO? Where can I go to understand how.
Steve Kim
[email protected]
SolarMetric Inc.
http://www.solarmetric.com -
RAW support for Olympus OMD EM5
Outfitting for a year long back pack trip. My MacBook Pro is going. Am in processof purchasing an Olympus OMD EM5 micro 4/3 camera for the trip. I use Aperture for photo processing. Any idea when or if Aperture will add support for developing the RAW shots from the EM5?
thnxThe usual interim approach for raw support has been to use Adobe's DNG converter to create DNGs that Aperture could read. This has always worked with the esception of non-Bayer sensors like the Foveon in Sigma cameras. But I can't get Aperure to read DNGs created from my E-M5's ORFs using DNG Converter v6.7 and have no idea where the problem lies.
It's taken Apple months to support Olympus cameras in the past, so I'm not optimistic.
—Andreas -
Support for suing sql directly.
Hi All,
I'm new to Kodo, does it support using native sql in JDOQL? that is,
directly coding my queries in sql and passing them to JDOQL to parse and
execute?
If not available, is there any plans to integrate this feature or similar
ones ?
thanks.Just to clarify, Kodo supports using SQL at every level:
1) JDOQL/Query - Query Extensions
2) Custom Result Object Provider - issue total custom SQL queries
2) Mapping - See our customSQL for examples
Stephen Kim wrote:
There is no direct support for using SQL however most of our users can
accomplish the same thing using our Query Extensions (see our docs)
which allow you embed an entire where clause if so desired.
I think using SQL -instead- of JDOQL is on the project plan but I'm not
sure of the time frame.
Also, note that one can usually get around this limitation by using
Custom Object Provider. See the customSQL sample included in the
distribution for examples of this. This example includes a number of
different examples, but the main one to note is the
PersonResultObjectProvider portion.
Amr Noaman Abdel-Hamid wrote:
Hi All,
I'm new to Kodo, does it support using native sql in JDOQL? that is,
directly coding my queries in sql and passing them to JDOQL to parse and
execute?
If not available, is there any plans to integrate this feature or similar
ones ?
thanks.
Stephen Kim
[email protected]
SolarMetric, Inc.
http://www.solarmetric.com -
About Support for DB drivers...
Acoording to the Sun ONE Application Server 7 Release Notes the supported database drivers ONLY includes two Type-4 JDBC drivers, one for Pointbase and the other for Oracle 9 databases.
What happens with the rest of DB vendors?
Can I, for instance, use a PostgreSQL or SQL Server JDBC driver with the application server?
What does "supported DB drivers" means concerning the application server?
Kind regards,
CarlosThe supported & certified drivers means that they have tested this inhouse and works fine. I guess there is no harm in using other drivers as long as they are jdbc spec complaint. It should work as well.
-
Hello,
My question is quite simple : do you plan to support LDAP for Kodo ?
Regards,
DomWe don't have a timeline for LDAP support. Of course, we offer an
AbstractStoreManager to aid you in adding your own support for other
data stores. There is a complete sample for a simple XML store in the
Kodo download. If you'd like to talk to us about contracting for
official LDAP support, contact [email protected] -
Petition for Audible Support for Zen Mi
Dear sweet Creative people, please do as your name implies and get CREATIVE by supporting Audible.com for Zen Micro.....heavens, Apple was able to do it for their Pod-People !
astralyra,
Seeing that there's another similar ongoing petition. I'm closing this.
Alternate petition thread.
Jason
Maybe you are looking for
-
Audio Capture not available / grayed out
I have a Samsung SC-D263 connected and when I try to capture video in FCE there is no audio. When looking in the settings, the check box for audio capture is grayed out... any ideas? I managed to find drivers for the camera, but i don't know how to i
-
Oracle 11G - Table access problem
Hi, Iam new to Oracle...After creating a DataBase I created a connection and role has SYSDBA... And then I create a table....called Table1. And then I create a new USER and I Connect with same Databse SID but the role has DEFAULT for this new USER...
-
Sql server to oracle conversion
i received the following error while converting from sql server to oracle 10g on windows and sql developer version is 1.5.1 --oracle.dbtools.migration.workbench.core.ui.AbstractMigrationProgressRunnable.start(AbstractMigrationProgressRunnable.java:14
-
Create Time Dim from 2 dimensions
Hi all, I have an essbase cube with 2 dimensions related to time. Year (Contains Years) and Time (that contains Qtr, Months and days). I'm working with OBIEE and would like to know if I can create 1 Time dimension that combines Year and Time so I can
-
Firefox cannot load websites when Internet Explorer can.
I have read your article about this but I cannot follow your instructions as the only "tools" I can find to click on is in IE and brings down "internet options", which has an "advanced" tab (not a panel) and no settings tab. Am I misssing something?