L_window_manager- create_external_window( .. ) shows existing logons....

Hi,
I'm trying to open a seperate window to my main running component so that I can display messages in it for the main component.
I need to allow focus in both windows which is why i've used an external window.
Problem is I keep getting an initial logon screen in the new window as below. I have to press continue first which is kind of annoying.
Anyone know how to bypass this?
Thanks
Simon
You are already logged on to the system in the following sessions:
Cancel all existing logons
Continue

You can enable multiple login in two ways.
goto SICF and open service.
1.Navigate to default_host->sap->bc->bsp->sap->srm(double click on srm service)
2.Open Error Pages tab and clcik on Configuration button.
3.Check whether check for multiple logon is enabled.
or
goto RZ10
To allow the user to have multiple login in SAP R/3, one have to set the Profile Parameters u201CLogin/disable_multi_gui_loginu201D OR u201CLogin/multi_login_usersu201D.
1. Login/disable_multi_gui_login
Controls whether multiple logins are enabled or disabled. 0 = enable 1 = disable
2. Login/multi_login_users
Here a list user IDs can be deposited that would allow users a multiple login even though the multi login is generally disabled. The multiple login information are stored in the table URSR41_MLD.
Note: Select extented administration and clcik display. this is the place to maintain parameters.
Ref:
Configuration Settings
Login Parameters

Similar Messages

Make checkbox "Cancel all existing logons" not changeable

Dear SRM gurus!
we're facing problems with multiple logons of SRM web-users.
In SICF>BBPSTART> error pages --> logon pages -->configuration we activated "Check for multiple logon".
When users try to logon several times in SRM webui they get the warning-page "logon status check" with the checkbox "Cancel all existing logons".
Is it possible to make that checkbox "Cancel all existing logons" NOT editable to users.
Background: We want users not to login to the system twice or more times. So the "Cancel all existing logons" checkbox should always be set (greyed out).
Thanks a lot for your support.
Best regards,
Henning

Hi Jorge,
thanks for your answer.
I guess that parameter login/disable_multi_gui_login is not the solution for us.
Users do NOT log off correctly from webui. They just close the browser with the close button in the right upper corner. Then the session is still active and will only be killed automatically after a timeout of 2 hours.
When users want to log in again before these 2 hours are over they get the "multiple logon" page. There I want to the users to not be able to unmark the checkbox "Cancel all existing logons".
Thanks and best regards,
Henning

Template based on Modify Provision Resource not showing existing groups

Hi All,
In OIM 11gR1, we have created custom templates based on Provision and Modify Provision Resource. For templates based on Modify Provision Resource, Oracle says that it should show all existing groups/responsibilities of the beneficiary during request creation. However, it shows empty rows during adding of new responsibilities. Has anyone faced this issue and why is this happening.
Please let us know.
Thanks.

Samique Tanweer, Hope this solutions helps you.
One possibility is, If your CSS template is common for both BI and Other department Users except LOGO, then create a single CSS template.
In your report, Take a blank cell. Insert image into it.
Now, Create a Alert based on Users and apply that alert(Rule) to above inserted image.

Need a low-cost practical method to show existing PDF rpts in Excel

We have a Forms 10g Application. The customer is satisfied with 150+ reports (which are shown as PDFs in a web-browser). However, the user wants, at the touch of a button, to give a what-u-c-is-what-you-get, exact match, replication of the PDF report, in Microsoft Excel, so he can edit it and do other stuff.
This is our problem. We cannot modify any existing report, cos it will take a lot of time and effort. We cannot charge the customer as well so it has to be something very simple. We need something that can take the currently alright PDF report and then create the MS Excel out of it. It could be a open source tool (better) or even a licensed product.
We can't use ENHANCEDSPREADHEET desformat (we tried), because it adds extra rows and columns.
That is why we are searching for a PDF to Excel converter.

Hi,
I have not tried this before but I found several converters searching online .. check this out --> http://www.adobe.com/products/acrobatpro/pdf-to-word-excel-converter.html
Regards, Roberto

Preventing input form from showing existing record

Hello,
I'm creating a series of web pages to collect info from a user. On the first page, create.jsp, I have a CommandLink bound to the Create binding action. It forwards to the input form on its own page, form.jsp. The defaults (sequence number, creation date) from the model layer appear nicely in the form. If the user follows the page flow, the record is committed and everything is swell.
The problem is that users can enter "form.jsp" directly into their location bar in their web browser, and the input page will display the first record in the table. I cannot use an authorization scheme to prevent access because any general user of the web should be able to input their info. (In other words, you can't be logged-in before creating your login.)
How can I disable this? Or, is there a hook in the processing lifecycle that I can use to determine if a user has created a new row before displaying the input form?
I'm using JDev 10.1.3 production, ADF Faces, ADF BC.
Thanks,
-Anthony

I figured this out myself, actually this was quite simple.- just set the 'immediate' property on the component (button) to 'true'.

Why don't my existing bookmark folders show up in the edit bookmark window? How do I put a new bookmark in an existing folder in one step?

When you create a new bookmark by selecting the 'bookmark this page' command or clicking on the star next to the address, existing bookmark folders don't show up anywhere in the window. The only folder options are 'bookmarks toolbar', 'bookmarks menu' & 'unsorted bookmarks', non of which expand to show existing folders.

Try this extension:
Add Bookmark Here ² :
https://addons.mozilla.org/en-US/firefox/addon/3880

ON-LOGON does not fire in Form B, called from Form A

We have a situation like this. We are using Forms (Forms [32 Bit] Version 10.1.2.0.2 (Production)).
We migrated this application to Forms 11.2.0.1.0. Problem is that the ON-LOGON trigger does not fire in the 2nd level forms. Our application work like this.
(a.) User double-clicks URL icon.
(b.) Form A is opened without asking for un/pwd. We put a NULL; in the ON-LOGON of A.fmb.
(c.) This is the main form of the application. This has a canvas with 6 buttons. Each button will launch it's own separate application with it's own menu.
(d.) Now user presses button in A. This launches Form B. We use
Run_Product(FORMS, 'B', SYNCHRONOUS, RUNTIME,FILESYSTEM, pl_id, NULL); (e.) Now, in Form B, in the ON-LOGON trigger we have put code to show the logon screen and login to the DB.
Problem is, this works in 10g Forms. But we had to replace the RUN_PRODUCT with a CALL_FORM after migrating to 11g since RUN_PRODUCT is not supported in 11g.
Problem is that when you use CALL_FORM to call Form B, the ON-LOGON of the Form B does not fire. We tried OPEN_FORM and NEW_FORM with different parameters, but the behavior is the same. i.e. ON-LOGON does not fire.
What is the solution or workaround for this please.
Edited by: user12240205 on Oct 15, 2012 4:50 AM
Edited by: user12240205 on Oct 15, 2012 4:52 AM

Michael Ferrante (Oracle) wrote:
If you need to open another form you should use CALL_FORM, OPEN_FORM, or NEW_FORM. In these cases, ON-LOGON will not automatically fire because the connect info is passed from the calling form. If you need to login from the called form then you need to need to programatically cause that to occur. Refer to the LOGON and LOGON_SCREEN built-ins in the Builder help for more info. You can fire these from almost any trigger you like, for example in a WHEN-NEW-FORM-INSTANCE trigger or where ever is appropriate for you application.Michael, we tried using the CALL_FORM, OPEN_FORM & NEW_FORM.
Also, there is NO connection to the DB, when B is called from A since we don't login to the DB in A (ON-LOGON has NULL;).
So, if there is no DB connection when B is called, shouldn't the ON-LOGON in B fire?
We tried firing the LOGON_SCREEN and LOGON in the WHEN-NEW-FORM-INSTANCE. But, for some reason, the we don't get the menu (we get a menu not found error). We tried correcting the paths and other things but still no solution.

Error when loggong on for external ID "": Error during SAML 2.0 logon

Hi,
I'm getting be below error when trying to use SAML SSO for a ABAP Webdynpro page on a NW 7.4 system. When I access the page, it redirects to the identity provider, comes back to the page and it shows the logon page. I'm looking for any ideas of things I could look at.
N SAML20 SP (client 400): Incoming Response
N SAML20 Binding:          POST
N SAML20 IdP Name:         http://xxxxxx/adfs/services/trust
N SAML20 Status Code:      urn:oasis:names:tc:SAML:2.0:status:Responder
N SAML20 SP (client 400): Default ACS endpoint: https://xxxxxx/sap/saml2/sp/acs/400 , old default ACS endpoint
N SAML-Trace: CALL 'SAML login': SY-SUBRC = 222 , PWDCHG = 0
N *** ERROR => SAML-Trace: Path = /sap/bc/webdynpro/sap/oauth2_authority [sign.c       16519]
N {root-id=005056AD26DF1ED4B69880FF4BE51F68}_{conn-id=005056AD26DF1ED4B69880FF4BE53F68}_1
N *** ERROR => SAML-Trace: Returncode = 222 [sign.c       16519]
N *** ERROR => SAML-Trace: Message class = SAML number = 011 [sign.c       16519]
N *** ERROR => SAML-Trace: Message = Error when logging on for external ID "": Error during SAML 2.0 logon [sign.c       16519]
I have updated the service to use alternate logon procedure and added the handler CL_HTTP_EXT_SAML20
I have added the identity provider through transaction SAML2, but it does not seem to be working.
Here is a decrypted SAML assertion:
<samlp:Response ID="_9c844d84-8117-4851-8270-aeb12e935daf"
Version="2.0"
IssueInstant="2015-04-02T00:21:06.477Z"
Destination="https://xxxxxxxxx/sap/saml2/sp/acs/400"
Consent="urn:oasis:names:tc:SAML:2.0:consent:unspecified"
InResponseTo="S005056ad-26df-1ed4-b699-c4c630853f68"
xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"
>
<Issuer xmlns="urn:oasis:names:tc:SAML:2.0:assertion">http://xxxxxxxx.com/adfs/services/trust</Issuer>
<ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
<ds:SignatureMethod Algorithm="http://www.w3.org/2001/04/xmldsig-more#rsa-sha256" />
<ds:Reference URI="#_9c844d84-8117-4851-8270-aeb12e935daf">
<ds:Transforms>
<ds:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature" />
<ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
</ds:Transforms>
<ds:DigestMethod Algorithm="http://www.w3.org/2001/04/xmlenc#sha256" />
<ds:DigestValue>08HK08VLpJC23JoQs+p+oHbDBvjRF+9NwBeowmlFTrY=</ds:DigestValue>
</ds:Reference>
</ds:SignedInfo>
<ds:SignatureValue>xxxxxxx</ds:SignatureValue>
<KeyInfo xmlns="http://www.w3.org/2000/09/xmldsig#">
<ds:X509Data>
<ds:X509Certificate>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</ds:X509Certificate>
</ds:X509Data>
</KeyInfo>
</ds:Signature>
<samlp:Status>
<samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Responder">
<samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:NoPassive" />
</samlp:StatusCode>
</samlp:Status>
</samlp:Response>

Hi Brian,
I am not sure but you could check below thread and couple of sap note.
Single Sign On - Sharepoint 2010 to SAP using ADFS
1799402 - Automatic account creation for SAML 2.0 SP
1257108 - Collective Note: Analyzing issues with Single Sign On (SSO)
It may help you to resolve / identify the cause of the issue.
BR
AKJ

Problem with SAPConsole Logon

Hi;
We are using SapConsole for using with a barcode reader, in the browser it shows the logon screen, when we type the user and password and then click the ok button, it stays in the logon screen.
we already check the sapgui configuration and is ok.
this app was working ok until yesterday that it behave that way.
So, what can we do to restore the connection with the sap logon and the tcode..? uninstall and reintall again the sapconsole..?
any advice is wellcome.
Thanks on advance
David Funez
Tegucigalpa, Honduras

it got solved reinstalling the SO in the server.

HTTPS Without client authentication shows error of Certificate

Hi Experts,
I am trying to develop a SOAP to RFC scenario where in SOAP sender HTTP security level - HTTPS Without Client Authentication is selected.
I have downloaded WSDL from Sender agreement and trying to test web service from SOAPUI. Now as per my understanding simply placing request to HTTPS:<host>:<port>:XISOAPAdapter/....   with correct user should work and this scenario shouldn't need any certificates.
However in SOAPUI and even in RWB SOAP Sender, I am receiving error that - Client Certificate required.
Any comments on why would it be happening ?    In fact whatever option in HTTP Security level I select, error remains same. In NWA is there any other configuration to be done to make this work ?
Is below understanding right ?
-- >> HTTPS Without client authentication will not need certificate exchange and simply user authentication will do
Thanks..
regards,
Omkar.

Hello Omkar,
What you are trying to do is Consume a SOAP->RFC scenario (synchronous) from SOAP UI and you want that to be secure. With this requirement, just having the certificates alone is not sufficient (sorry for late response..i just came across this post when i was searching something else )
1)How did you generate the certificate and the private key? Because Key Generation plays a Big Part in it. The Key should have been signed by a CA. Though its not signed by a CA, a trick which would work is, at the time of Key generation, provide the Organization Name as SAP Trust Community and Country as DE.
2) At the time of Key Generation definitely it shall ask for a password. You remember that.
3) Export the Private Key as PCKS12 format and the certificate as Base64 format and have it in your local system, (shall be used later in SOAP UI and NWA)
Here follows the major part
4) Open NWA and go to Configuration Management->Authentication
5) Go to Properties Taband click Modify
6) Under Logon Application select the check box "Enable Showing Certificate Logon URL Link on Logon Page" and save it.
7) Now go to the Components Tab.
8) Search for client_cert Policy Configuration name and Edit it it. Make sure the following Login Modules are maintained in the same Order
==> Name: com.sap.engine.services.security.server.jaas.ClientCertLoginModule
       Flag : Sufficient
==> Name: BasicPasswordLoginModule
       Flag: Optional
9) Now Select the name com.sap.engine.services.security.server.jaas.ClientCertLoginModule and you can see lots of entries under the Login Module Options. Remove them all and add anew entry (case sensitive). Save it.
==>Name: Rule1.getUserFrom
       value : wholeCert
10) Now search for the Policy Configuration name sap.com/com.sap.aii.adapter.soap.app*XISOAPAdapter
and edit it.
11) Under the Authentication stack select the template client_cert against the used template label. and save it
12)If you are using AXIS Adapter, do the steps 11 for the Policy Configuration name sap.com/com.sap.aii.axis.app*XIAxisAdapter.
13) Now in NWA navigate to Operation management->Identity Management
14) Search for the user PIISUSER (or any user id which you thing has good amount of authorizations to access the service)
15)Click Modify and go to the TAB Certificates and upload the certificate (not the private key) which you downloaded in step 3.
16) With this setup what you have done is you have created proper certificate, enabled certificate based logon for SOAP and AXIS adapter and associated the certificate with a user id.
17) usually in Dual stack PI, we will have the same certificate added to the server pse in strustsso2 tcode. But since its single stack, just make sure in the cert and keys you add this certificate to teh Trusted CAs and also to the Server Keystore.
18) Now in SOAP UI Right Click on the Project Name->Select Show Project View->Under the WS Security Configurations->Go to Keystore and certificates and add the Private Key
19) In SOAP UI under the operation name, in the Request, in stead of providing user credentials, choose the private key name against the SSL Keystore entry.
20) Before you execute the scenario make sure you have chosen the HTTPS url and https port is proper. Usually its 443, but some customers configure their own port.
Scenario should work now. Else if you track it using XPI Inspector, you can find out easily at which step it has gone wrong.
Good Luck!!
Best Regards,
Sundar

Type of logon in SM04

Hello everybody,
when i execute the transaction SM04, then one user show the logon type RFC.
then what is mean by the logon type if RFC, I know that the RFC means Remote Function call.
But what is mean by logon type RFC
Thanks
Ganesh

Simply means that the user was logged one via an RFC connection instead a SAPGui connection.
For example if you have Solution Manager you'll see frequent connection from the SOLMAN user via RFC.
Regards
Juan

DigiKam won't show anything [SOLVED, like]

Hi,
Just noticed (I don't use it every day) that digiKam refuses to show existing pics, neither as albums, nor in chronological order, etc. I deleted and (apparently) successfully recreated the data base, but still no show. I can't tell which update is to blame. Any ideas?
Last edited by Llama (2009-10-07 11:24:14)

This was most likely a kioslave issue, I would assume they had to be rebuilt after updating KDE.
The console should have told you that the kioslaves could not be loaded though...

Excise Assesable Value from Existing excise Invoices In Subcontracting

Dear All,
My requirement is that during Subcontracting Challan creation System should pick assesable value of material from existing excise Invoices & not from Assesable Value maintained in J1id.
I have done all subcontracting related configurations. I am not maintaining assesable value in J1id.
Now while creating subcontracting challan system is not showing existing excise invoices when i click excise Invoice tab & passing a warning msg that assesable value of material is Zero.
Is it a bug or lack in configuration? Need experts advice.
Thanks
Nitesh

Hi,
You have to always maintain assessable value of the components to be supplied to subcontracting vendor in J1ID and also excise rates for the chapter ids are linked with these components. So, in J1IF01, system will take assessable value as excise value base value and calculate excise duty based on tax invoice, as per my knowledge it cannot be linked with existing tax invoice.

ODI 10.1.3.5.3 and Windows 7 64 bits: ODI freeze after the logon window

Hi,
I'm trying to use ODI 10.1.3.5.3 but i can't open the application.
It show the logon window and after click ok, ODI show the splash screen and nothing happens (the splash screen stay open forever and i need to kill javaw.exe process to close).
I'm using windows 7 64 bits and tried with java 5, 6 and 7.
Where ODI generate logs that are helpful enough to solve this problem ?
Thanks.

I dont think ODI 10 is compliant with 64 bit java.
You should try installing Java 32 java and configure ODI to use that.
And check the details in here.
http://www.oracle.com/technetwork/middleware/data-integrator/overview/odi-certification-128990.xls
HTH
[email protected]
Making your ODI journey a success.
Contact us for any of your ODI training needs.

Error when setting GPO Display information about previous logon during user logon on Wins 7

We recently try to deploy a GPO on our network (All Server 2008 and Windows 7) to show previous logons during
user logon. The setting is located in Computer Configuration| Policies |
Administrative Templates | Windows Components | Windows Logon Options | Display
information about previous logons during user logon = Enabled. Our domain
level is set to Windows Server 2008. I verified that it is Windows Server 2008
on Domain and Trust.
Here is the article about this setting
Active Directory Domain Services: Last Interactive
Logon
But after we deploy the setting, we are no longer able to login
to any of our windows 7 machines. All of them got an error message said :
“Security policies on this computer are set to display information about the
last interactive logon. Windows could not retrieve this information. Please
contact your network administrator for assistance.”
The setting
worked on windows server 2008. I was able to login to DC and revise the setting,
so we can log back in the windows 7 machines.
Anyone has experience this
issue before? I looked up all of the web and only thing they said is to make
sure the domain functional level must be set to Windows Server 2008, which it
is.

Hi,
Have we also applied this setting to domain controllers? To make this policy work properly, we also need to apply this setting to domain controllers. If not, users will not be able to log on to the system.
Regarding this point, the following article can also be referred to for more information.
Group Policy Setting of the Week 35 – Display information about previous logons during user logon
http://www.grouppolicy.biz/2010/07/group-policy-setting-of-the-week-35display-information-about-previous-logons-during-user-logon/
Best regards,
Frank Shen

L_window_manager- create_external_window( .. ) shows existing logons....

Similar Messages

Maybe you are looking for