L2TP Remote Access disconnects after a few hours.

Have a few users on Vista/7 using Windows L2TP to connect to our ASA5510. It is reported that after a few hours the connection drops. From what I have seen this can be anywhere around 5-6 hours. Of course my connection will drop after an amount of time has passed and no traffic has passed the tunnel. But the users are adament that this drops during large transfers; i.e. not a timeout issue.
Before I spend anymore time on this I just want to know if this is normal behavior for a remote access L2TP using Windows to disconnect on it's own after this amount of time. Never had a reason myself to remain connected that long, and when I did I used a site 2 site tunnel.

Below is a sample log of the time when disconnects occur, I highlighted in bold the problem area.
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing IPSec SA payload
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing IPSec nonce payload
vpn-7-715001: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing proxy ID
vpn-7-713906: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Transmitting Proxy Id: Remote host: 76.17.XX.XX Protocol 17 Port 0 Local host: 216.XX.XXX.XXX Protocol 17 Port 1701
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing NAT-Original-Address payload
vpn-7-713171: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, NAT-Traversal sending NAT-Original-Address payload
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing qm hash payload
vpn-7-714005: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, IKE Responder sending 2nd QM pkt: msg id = 00000017
vpn-7-713236: IP = 76.17.XX.XX, IKE_DECODE SENDING Message (msgid=17) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NAT-OA (131) + NONE (0) total length : 172
vpn-7-713236: IP = 76.17.XX.XX, IKE_DECODE RECEIVED Message (msgid=958052a1) with payloads : HDR + HASH (8) + DELETE (12) + NONE (0) total length : 68
vpn-7-715047: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, processing hash payload
vpn-7-713906: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, processing delete
vpn-7-713170: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, IKE Received delete for rekeyed centry IKE peer: 76.17.XX.XX, centry addr: ad03bb38, msgid: 0x00000016
vpn-7-713906: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, L2TP/IPSec: Ignoring delete to a rekeyed centry (msgid=16)
vpn-7-713236: IP = 76.17.XX.XX, IKE_DECODE RECEIVED Message (msgid=17) with payloads : HDR + HASH (8) + NONE (0) total length : 52
vpn-7-715047: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, processing hash payload
vpn-7-713906: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, loading all IPSEC SAs
vpn-7-715001: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Generating Quick Mode Key!
vpn-7-715001: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Generating Quick Mode Key!
vpn-5-713049: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Security negotiation complete for User (sam5510) Responder, Inbound SPI = 0xc8ed80c2, Outbound SPI = 0xe007e1fd
vpn-6-602303: IPSEC: An outbound remote access SA (SPI= 0xE007E1FD) between 216.XX.XXX.XXX and 76.17.XX.XX (user= sam5510) has been created.
vpn-7-715007: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, IKE got a KEY_ADD msg for SA: SPI = 0xe007e1fd
vpn-6-602303: IPSEC: An inbound remote access SA (SPI= 0xC8ED80C2) between 216.XX.XXX.XXX and 76.17.XX.XX (user= sam5510) has been created.
vpn-7-715077: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Pitcher: received KEY_UPDATE, spi 0xc8ed80c2
vpn-7-715080: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Starting P2 rekey timer: 3420 seconds.
vpn-5-713120: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, PHASE 2 COMPLETED (msgid=00000017)
vpn-7-713906: IKEQM_Active() Add L2TP classification rules: ip <76.17.XX.XX> mask <0xFFFFFFFF> port <4500>
vpn-7-715077: Pitcher: received KEY_SA_ACTIVE, spi 0xc8ed80c2
vpn-7-713906: KEY_SA_ACTIVE old rekey centry found with new spi 0xc8ed80c2
vpn-7-713906: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, sending delete/delete with reason message
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing blank hash payload
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing IPSec delete payload
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing qm hash payload
vpn-7-713236: IP = 76.17.XX.XX, IKE_DECODE SENDING Message (msgid=d84b3b70) with payloads : HDR + HASH (8) + DELETE (12) + NONE (0) total length : 68
vpn-7-713906: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Active unit activates new SA for remote peer 76.17.XX.XX.
vpn-7-715009: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, IKE Deleting SA: Remote Proxy 76.17.XX.XX, Local Proxy 216.XX.XXX.XXX
vpn-6-602304: IPSEC: An outbound remote access SA (SPI= 0xFD65F940) between 216.XX.XXX.XXX and 76.17.XX.XX (user= sam5510) has been deleted.
vpn-6-602304: IPSEC: An inbound remote access SA (SPI= 0xB2891595) between 216.XX.XXX.XXX and 76.17.XX.XX (user= sam5510) has been deleted.
vpn-7-715077: Pitcher: received key delete msg, spi 0xb2891595
vpn-4-713903: IKE Receiver: Runt ISAKMP packet discarded on Port 4500 from 76.17.XX.XX:4500

Similar Messages

Apple USB modem disconnects after a few hours??

I bought an imac G5 -- it came without a modem. (After a false start), we bought the Apple USB modem. Now we want to upgrade the operating system, either with Safari or with "Software Update". It tells us we need Mac OS X Update to 10.4.3, and it is 97.0 MB.
We have a fairly slow dial-up connection -- always have, so we usually download large files like these overnight. But our Apple USB Modem won't let us - perhaps it is too unstable. After 6 or 7 hours we get disconnected. (It says we need 8 or 9 hours to download the file). Our main problem is that we can't stay connected for more than 7 hours.
I've made sure under the Network Preferences, for external modem, the Prompt every xx minutes to maintain connection, and Disconnect if idle for xx minutes, are both unchecked. I've turned off the screensaver. I make sure I move the mouse and a window every hour or so. I've phoned my ISP, and they deny a time-limit. I've tried not breating heavy near the computer.
What else can I do? I've always been able to stay on line over-night for download with my old computer/modem, but not with this one. I've tied at least 4 times. Is there something wrong with the Apple USB Modem?
Also, when I tried with Safari, and the modem disconnects, I thought I could just re-log on and start downloading where I left off -- but no. Every time I click the "resume downloading" circle next to the update in the download window, it starts from the beginning. -- it doesn't resume where it left off!
That is the most frustrating part about this -- I've downloaded the first half of the file a half-dozen times, and no matter if I use Safari or Software Update, I can't get the computer to remember the hours of work it just did and simply continue downloading from where it left off. If I could just solve that issue, I could get the system update downloaded.
If we don't solve this, we will never be able update any apple software with large files. Thanks for your help.
Francis

it's a 3.5 hour round trip to the closest Mac store.
I just want my modem to work right -- the first time. Actually, this is the third modem I've bought (all on-line since I have no mac store close). The first USB modem didn't have a mac driver. The next bluetooth modem said it was mac compatable, but when it arrived, it was only capatable with os9. So I get a modem right from Apple, and darn, I just want it all to work now. I'm tired of foolin around. Why wasn't there an internal modem anyway?
My old modems and macs could download overnight. All I want is for it to be as good as the old stuff.

Firefox get disconnected after a few hours

I have Windows 7 Enterprise. With version 35 Firefox lost connection, the only way to make it work is to close it and reopen. I look for some fix in the support pages but there is no answer. The only similar issue suggests it's a firewall issue, but even if disconnect my computer firewall this still happens. At home there is a Windows 8.1 professional computer with the same issue.
I upgrade to version 36 expecting this issue is fixed but it doesn't.
I installed different windows browsers (Chrome, Iron, Tor, Opera) the only one with this issue is Firefox. Behavior make really unlikely to be a firewall issue.

Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift><br> ''(Mac Options)'' ''' key, and then starting Firefox. Is the problem still there?
Are you having the problem with one web site? Several, many?
What were you doing at the time?

Not accessable after a few hours

I experience that home sharing is not accessable after a few hours (or the next day after a restart etc). The home sharing icon in itunes is visible but when clicking on it sharts loading and stops half way and then time out.

No
Solution may be found if you search in the "More Like This" section over in the right column.

WRT54G3G/Vodafone connect card - Network loss after a few hours or sometimes days

I have a Linksys WRT54G3G router with a vodafone mobile connectcard. I did setup the "keep alive" function to the nearest DNS servers to keep the modem alive 24/7. However after a few hours of somtimes after a few days. The modem "hangs" itselves. After a power-up of the modem it's start to work again. This modem is on a project location with no people available to reset the modem. At this moment we use a local timerswitch to reset (power off/on) the modem every 24 hour, but this is not really a solution. We're using the latest firmware. Please advise !

Re ; WRTG3G-ST Disconnect - I am running 2.00.9 firmware with a Sprint S720 card.
The Router disconnects from the Internet after a few minutes of operation.
I have set 'Auto Connect' to both auto (1000 min) and manual. and still get the disconnect.
Once it disconnects I cannot reconnect remotely even if I launch a browser or ping.
Pressing the Data Card button does reconnect to the Internet.
Some times it runs for hours.
My 3G signal in this area is not the geatest but I would expect the router to handle that.
Any suggestions on how to keep connected. .

FP1600 loses network connection after a few hours

My FP1600 loses its network connection after a few hours. It is part number 185690C-01, with firmware 4.11. I am running FieldPoint Explorer version 3.0.1 and LabView 6.1 from Windows XP Professional. I set it up, and everything runs fine for 4 hours or more. I do not have the network watchdog enabled, and the FP1600 is in constant communication with the host computer in any case. Sometime in the middle of the night the communication is lost. The FP1600 link light
is on, and it is still receiving packets, but it will not respond to a ping or any other communications. Only a power cycle brings it back. The FP1600 is sitting right next to the host computer, both attached to the same network switch. There is no interruptio
n of network services to the two.

Hi Heinz,
We are also trying to troubleshoot this same problem (Intermitten network connection loss with FP1600 Ethernet Module - Error code "33163", Error Message - "FP1600 Connection to module has been lost."). We have checked other possible causes for this sort of behaviour. Including independent assessment of netowork availability at the time of error reporting, connecting dedicated power supply to the FP1600 module, temperature of cabinet housing the module (which is between 10 and 50 deg C), disconnecting sensors connected to various I/O modules connected to this module, increasing duration of parameter "time out" (the time module will wait before reporting an error if it can not access network). However, none of the above resolved the intermittent and random network loss errors.
The MAX version is 3.0.2, and the firmware on the module is 4.17, Labview version is 7.0 and the Operating System is windows NT.
I was wondering is there any information about this problem from any user or NI recently. The only solution looking in to this discussion forum seems to be replacing the module.
MehulMessage Edited by MPatel on 02-28-2005 08:16 PM

Labview Program always crashs after a few hour' work

My Labview Program always crashs after a few hour' work. The error report is:
#Date: 2014年7月30日 4:27:27
#OSName: Windows 7 Ultimate
#OSVers: 6.1
#OSBuild: 7600
#AppName:
#Version: 12.0 32-bit
#AppKind: AppLib
#AppModDate: 07/29/2014 20:13 GMT
#LabVIEW Base Address: 0x30000000
<DEBUG_OUTPUT>
2014/7/30 8:34:11.006
DAbort 0xF50EFD7B:
c:\builds\penguin\labview\components\mgcore\trunk\12.0\source\MemoryManager.cpp(1104) : DAbort 0xF50EFD7B:
minidump id: 6ebe0400-78d2-41e3-b2fd-858c21e3567b
$Id: //labview/components/mgcore/trunk/12.0/source/MemoryManager.cpp#13 $
</DEBUG_OUTPUT>
0x30076B23 - lvrt <unknown> + 0
0x307D1F90 - lvrt <unknown> + 0
0x30605C66 - lvrt <unknown> + 0
0x6C42A045 - nivissvc <unknown> + 0
0x075A1F00 - nivision <unknown> + 0
0x03B0577A - <unknown> <unknown> + 0
0xE5BA0800 - <unknown> <unknown> + 0
Who knows what had happened? Thank you for your help.

Thank you for your reply.
I don't build array continuously. I just build a few queues. I am sorry the program is too large to show it to you. I have read the dump file. It seems like memory overflow. Do you think so? But it seems like there is no chance for memory overflow in Labview. The dump file is as below:
Microsoft (R) Windows Debugger Version 6.3.9600.17029 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [D:\LabVIEW Data\LVInternalReports\1.0.0.1\51437f73-aab6-4097-b7e1-3fee8a74e4dd\6ebe0400-78d2-41e3-b2fd-858c21e3567b.dmp]
User Mini Dump File: Only registers, stack and portions of memory are available
************* Symbol Path validation summary **************
Response Time (ms) Location
OK C:\Program Files (x86)\Symbols
Symbol search path is: C:\Program Files (x86)\Symbols
Executable search path is:
Windows 7 Version 7600 MP (4 procs) Free x86 compatible
Product: WinNt, suite: SingleUserTS
Machine Name:
Debug session time: Wed Jul 30 08:34:10.000 2014 (UTC + 8:00)
System Uptime: not available
Process Uptime: 0 days 4:06:44.000
This dump file has an exception of interest stored in it.
The stored exception information can be accessed via .ecxr.
(dfc.4b8): Unknown exception - code 00000002 (first/second chance not available)
*** WARNING: Unable to verify timestamp for ntdll.dll
*** ERROR: Module load completed but symbols could not be loaded for ntdll.dll
*** WARNING: Unable to verify timestamp for kernel32.dll
*** ERROR: Module load completed but symbols could not be loaded for kernel32.dll
eax=13dbec20 ebx=13dbe550 ecx=00000008 edx=00000008 esi=00000003 edi=13dbe570
eip=77b564f4 esp=13dbe500 ebp=13dbe59c iopl=0 nv up ei pl zr na pe nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
ntdll+0x464f4:
77b564f4 c3 ret

HT4177 My mackbook pro suddenly freezed and when I swiched off and on again, a grey screen appeared with an apple logo then a loading circle underneath, and after a few hours, a blue screen appeared. What shall I do with this?

My mackbook pro suddenly freezed and when I swiched off and on again, a grey screen appeared with an apple logo then a loading circle underneath, and after a few hours, a blue screen appeared. What shall I do with this?

What operating system version, and do you have any backups of your data off the machine? TimeMachine? Option Key bootable clones? Storage? DVD's?
A reinstall of the operating system may be in order as a last resort, so if any of these steps on these links get you into the machine, make sure to backup your personal data (Music, Pictures, Documents, Movies) off the machine to a non-encrypted powered external drive regular storage drive (not TimeMachine as it might be corrupted too) and disconnect as soon as possible.
Good Luck and report back all what you tried.
Also report what change occured before this tragedy happened, was there a Software Update? A EFI firmware update? Etc.
https://support.apple.com/kb/TS3148
more:
https://support.apple.com/kb/TS2570
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8963.html
To boot off the 10.6 install disk, hold c or option key while the disk is in the machine.
To boot into 10.7 Recvoery mode, hold the command and r keys down while booting.
To use Safe mode, hold down the Shift Key while booting.
Other assistance
https://support.apple.com/kb/HT3964
https://support.apple.com/kb/HT1379
https://support.apple.com/kb/ht1782
https://support.apple.com/kb/HT1564

Why does my IPod shuffle stop after a few hours playing on shuffle when it should go for days?

Why does my IPod stop playing after a few hours on shuffle when it should play for days?

A few possibilities... (Each numbered item is a separate thing to check or try.)
(1) What does the shuffle's light do when you connect it to USB?
(2) If the docking cable plug is not fully inserted, it may not have a good connection for charging. Make sure the docking cable plug is fully inserted into the shuffle's headphones jack, as shown in this document
iPod shuffle (4th generation): Not seen in iTunes
(3) If there are other USB devices connected to your computer at the same time, try disconnecting other devices (including USB hub) so that the shuffle is the only device connected to a direct USB port, to see if that makes a difference (you can leave standard USB keyboard/mouse connected if used).
(4) If you have a USB power adapter (such as from an iPhone, iPad, or other device), that plugs into the wall outlet, as a test, connect the shuffle's docking cable to the adapter and connect the shuffle. Does it change from a power adapter?
(5) Some newer Windows PCs (if you use Windows and not a Mac) may have a "feature" that shuts off full power to the USB port when a connected storage device is no longer mounted by the system. An iPod is a storage device, and after syncing, iTunes unmounts the iPod's disk (if you are using automatic syncing). If Windows shuts off full power to the USB port, the battery cannot charge. To see if this is the problem, does the iPod appear in iTunes when it is connected, even though the battery is not charging? If it does, select the iPod in iTunes so that you see its Summary screen. There is an option (checkbox) there for Enable disk use. If it's not already checked, check that box and Apply. Enabling disk use keeps the iPod's disk mounted continuously, so Windows will keep the USB port at full power (and the battery will charge). If the iPod now charges, there may be a way to disable this "energy saver" feature in Control Panels, so that you can turn OFF Enable disk use. NOTE: When Enable disk use is turned ON, you need to Eject the iPod in iTunes before physically disconnecting it.

Smb network shares from W7 PC stop working after a few hours

I have a W7 pc sharing storage on my network.
when connecting when first starting my macbook, it connects fine, but after a few hours it drops out, and i am unable to connect to it unless i restart my macbook.
I have been using "connect to server" to connect my network shares, and when i try to reconnect them using this, it just keeps trying to connect, and wont ever connect even after leaving it to try for over 4 hours (connecting when first starting is fine, taking less than a minute).
sounds similar to a problem with the 10.6 server, where smb crashes.
is there a way to restart smb service on the macbook, or even fix it, so that it doesnt have to always be reconnected?
computer_tim

computer_tim wrote:
I have a W7 pc sharing storage on my network.
when connecting when first starting my macbook, it connects fine, but after a few hours it drops out,
That's normal. Connections to non-server Windows machines will drop after a period of non-use.
and i am unable to connect to it unless i restart my macbook.
That's not normal. You should be able to reconnect at will.
I have been using "connect to server" to connect my network shares, and when i try to reconnect them using this, it just keeps trying to connect, and wont ever connect even after leaving it to try for over 4 hours (connecting when first starting is fine, taking less than a minute).
There's a network connectivity problem. That is not how things are supposed to work.
sounds similar to a problem with the 10.6 server, where smb crashes.
Okay, you definitely have a network connectivity problem. OS X Server is not supposed to behave that way. What kind of network infrastructure do you have? What make/model routers, switches, hubs, whatever? WIred/wireless? What class cabling or if wireless, what class wireless?
is there a way to restart smb service on the macbook, or even fix it, so that it doesnt have to always be reconnected?
Yes. Usually you just disconnect and reconnect at will.
computer_tim

HT4889 using migration from mac to mac, freezes after a few hours.

I'm using migration from my old mac to my new one, it's taking forever and freezes after a few hours.
Help

computer_tim wrote:
I have a W7 pc sharing storage on my network.
when connecting when first starting my macbook, it connects fine, but after a few hours it drops out,
That's normal. Connections to non-server Windows machines will drop after a period of non-use.
and i am unable to connect to it unless i restart my macbook.
That's not normal. You should be able to reconnect at will.
I have been using "connect to server" to connect my network shares, and when i try to reconnect them using this, it just keeps trying to connect, and wont ever connect even after leaving it to try for over 4 hours (connecting when first starting is fine, taking less than a minute).
There's a network connectivity problem. That is not how things are supposed to work.
sounds similar to a problem with the 10.6 server, where smb crashes.
Okay, you definitely have a network connectivity problem. OS X Server is not supposed to behave that way. What kind of network infrastructure do you have? What make/model routers, switches, hubs, whatever? WIred/wireless? What class cabling or if wireless, what class wireless?
is there a way to restart smb service on the macbook, or even fix it, so that it doesnt have to always be reconnected?
Yes. Usually you just disconnect and reconnect at will.
computer_tim

AirPort Extreme disappears after a few hours

So I just got myself a new APExtreme. After a few hours of operations I have to power-cycle the device because 1) It disappears from the AirPort Utility and 2) As it does so it completely disconnects all of the itunes homesharing (and I believe all of the bonjour services disappear). Somehow these two events occur simultaneously. The rest of the network works fine (as a matter of fact the currents state is exactly this whilst I type this note). I have 5 laptops and 2 mac minis all experiencing this with the Extreme.
Any one experience something similar?

Open up a OS X terminal window and at the prompt, type:
ping <basestation IP address>
ie. ping 192.168.1.1
If you do this from the Windows boxes, the command is:
ping <basestation IP address> -t
It will output a ping to the router constantly and give you response rates...
What happens when it disconnects? Do the pings time out or do you get an error saying no route found to host?

HTTP Streaming errors after a few hours of recording

I am publishing a 300/500/800kbps stream from FMLE 3.1 (RTMP) to FMS 3.8.
For playout, I am using the OSMF Player and HTTP dynamic streaming.
After a few hours of the stream being published, it becomes unplayable and freezes whenever you try to access it, and I get the following errors in my Apache logs:
[Mon Apr 19 10:10:48 2010] [error] mod_f4fhttp [500]: Coretech error 72 when processing /live/bbcamerica/streams/bb
camerica1Seg1-Frag13665
Can anyone translate that error ?
Is there additional debugging I can enable to get more log messages and traces?

I got a response back saying that there is a filesize limit of 2GB when using the mod_f4fhttp.so module in FMS 3.8.
127.0.0.1 - - [19/Apr/2010:15:51:04 -0400] "GET /live/discoveryid/streams/discoveryid1Seg1-Frag1425 HTTP/1.1" 200 1
296499 "http://192.168.105.103/demoapp-intranet/OSMFPlayer.swf" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) Ap
pleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1045 Safari/532.5"
127.0.0.1 - - [19/Apr/2010:15:51:07 -0400] "GET /live/discoveryid/streams/discoveryid1.bootstrap?rand=1271706669703
HTTP/1.1" 200 21211 "http://192.168.105.103/demoapp-intranet/OSMFPlayer.swf" "Mozilla/5.0 (Windows; U; Windows NT
5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1045 Safari/532.5"
127.0.0.1 - - [19/Apr/2010:15:51:07 -0400] "GET /live/discoveryid/streams/discoveryid1Seg1-Frag1426 HTTP/1.1" 500 6
52 "http://192.168.105.103/demoapp-intranet/OSMFPlayer.swf" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleW
ebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1045 Safari/532.5"
[Mon Apr 19 15:51:21 2010] [error] mod_f4fhttp [500]: Coretech error 72 when processing /live/discoveryid/streams/d
iscoveryid1Seg1-Frag1428
This will apparently be fixed in a build coming out later this month.

Emails deleting themselves on Blackberry Pearl after a few hours

I have set up an Email account on my Blackberry Pearl for a UKmail Exchange email account so I can see my emails on my Blackberry. However after a few hours the incoming emails are deleting themselves only leaving the sent emails. Emails are deleting themselves before I can see them.
I've looked in Email Settings but there doesn't seem to be anything I can do to stop them. Has anyone had the same problem?

Check and see if your WiFi is on. I had (have) the same problem when I leave it on and go to work. The phone constantly searches for WiFi and the battery at a record pace. I turn it on only when I am at home or where I can access WiFi, other times I leave it off.
I also hear the Ebay app is a huge drain.
I also limited the home pages, I had over twelve that i think were constantly updating. I limited it to one.
Maybe one or all of these will help.
Regards.
It's always funny when it's someone else.

Unable to boot Z10, stuck on loading screen at 99% after a few hours.

Hi, I am unable to boot Z10, stuck on loading screen at 99% after a few hours. I did not try to update, nor load any other OS versions. Running a Bell Canada 10.1. Tried to pull battery, leave phone boot for 5 hours, still stuck on 99%. I tried plugging it in BB Link and computer will not recognize it.

dazedandconfused wrote:
Every option Im seeing is telling me Im going to lose my data... is this true? I know with other phones ppl are able to mount the device as if it were a hard drive and pull content from it... is this not possible with the Z10? Thanks...
I understand you are frustrated and seeking solutions, but please don't double and triple post your inquiry.
I've answered your thread already, here:
Re: Z10 stuck on loading logo on starting up
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

L2TP Remote Access disconnects after a few hours.

Similar Messages

Maybe you are looking for