L2TPv3 tunnel up but pings are failing

Hi,
I have configured an L2TP tunnel between loopbacks on an ASR1004 and an ASR1001. The tunnel gets established, and even shows me some two-way traffic counters (they don't increment in line with ICMP requests so don't know if they represent my ping attempts per se).
When I generate ICMP traffic, I learn MAC addresses on both ends, including within the ARP tables on the hosts. However, the pings time out. I have attached a diagram and have pasted some show outputs below.
Any ideas or suggestions would be greatly appreciated, thanks!
Wlg-COR-02#show ver
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSAL-M), Version 15.1(1)S, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Mon 22-Nov-10 12:32 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2010 by cisco Systems, Inc.
All rights reserved.  Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0.  The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY.  You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0.  For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
Wlg-COR-02 uptime is 2 weeks, 6 days, 14 hours, 59 minutes
Uptime for this control processor is 2 weeks, 6 days, 15 hours, 0 minutes
System returned to ROM by reload at 17:33:31 NZST Tue Aug 12 2014
System restarted at 00:22:39 NZDT Thu Oct 9 2014
System image file is "bootflash:/asr1001-universal.03.02.00.S.151-1.S.bin"
Last reload reason: PowerOn
License Info:
License UDI:
Device# PID                     SN                      UDI
*0      ASR1001                 JAE15290CAP             ASR1001:JAE15290CAP
License Package Information for Module:'asr1001'
Module name   Image level          Priority   Configured   Valid license
asr1001       adventerprise        1          NO           adventerprise
              advipservices        2          NO           advipservices
              ipbase               3          NO           ipbase
Current License Level: advipservices
cisco ASR1001 (1RU) processor with 1217912K/6147K bytes of memory.
4 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
7782399K bytes of eUSB flash at bootflash:.
Configuration register is 0x2102
Wlg-COR-02#show l2tun session all
L2TP Session Information Total tunnels 1 sessions 1
Session id 3769661188 is up, logical session id 65548, tunnel id 3529463940
  Remote session id is 1878828549, remote tunnel id 1043662242
  Remotely initiated session
  Unique ID is 12
Session Layer 2 circuit, type is Ethernet Vlan, name is Port-channel2.532:532
  Session vcid is 532
  Circuit state is UP
    Local circuit state is UP
    Remote circuit state is UP
Call serial number is 2074100010
Remote tunnel name is Air-COR-01
  Internet address is 210.48.12.100
Local tunnel name is Wlg-COR-02
  Internet address is 210.48.12.105
IP protocol 115
  Session is L2TP signaled
  Session state is established, time since change 03:41:52
    57 Packets sent, 48 received
    8190 Bytes sent, 6645 received
  Last clearing of counters never
  Counters, ignoring last clear:
    57 Packets sent, 48 received
    8190 Bytes sent, 6645 received
    Receive packets dropped:
      out-of-order:             0
      other:                    0
      total:                    0
    Send packets dropped:
      exceeded session MTU:     0
      other:                    0
      total:                    0
  DF bit off, ToS reflect disabled, ToS value 0, TTL value 255
  Sending UDP checksums are disabled
  Received UDP checksums are verified
  No session cookie information available
  FS cached header information:
    encap size = 24 bytes
    45000014 00000000 ff73fe48 d2300c69
    d2300c64 6ffca605
  Sequencing is off
  Conditional debugging is disabled
  SSM switch id is 8197, SSM segment id is 8201
Wlg-COR-02#
Wlg-COR-02#
Wlg-COR-02#show run inter
Wlg-COR-02#show run interface Po2.532
Building configuration...
Current configuration : 123 bytes
interface Port-channel2.532
 encapsulation dot1Q 532
 xconnect 210.48.12.100 532 encapsulation l2tpv3 pw-class l2tp
end
Wlg-COR-02#
Wlg-COR-02#
Wlg-COR-02#show run | beg pseudowire
pseudowire-class mpls-ethernet
 encapsulation mpls
 interworking ethernet
pseudowire-class l2tp
 encapsulation l2tpv3
 ip local interface Loopback4770
Air-COR-01#show version
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVIPSERVICESK9-M), Version 15.2(4)S4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Sun 01-Sep-13 09:53 by mcpre
IOS XE Version: 03.07.04.S
Cisco IOS-XE software, Copyright (c) 2005-2013 by cisco Systems, Inc.
All rights reserved.  Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0.  The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY.  You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0.  For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
Air-COR-01 uptime is 35 weeks, 1 day, 15 hours, 26 minutes
Uptime for this control processor is 35 weeks, 1 day, 15 hours, 29 minutes
System returned to ROM by reload at 23:57:45 NZDT Mon Feb 24 2014
System restarted at 00:01:45 NZDT Tue Feb 25 2014
System image file is "bootflash:asr1000rp1-advipservicesk9.03.07.04.S.152-4.S4.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco ASR1004 (RP1) processor with 1688640K/6147K bytes of memory.
Processor board ID FOX1544G2KE
16 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
937983K bytes of eUSB flash at bootflash:.
39004543K bytes of SATA hard disk at harddisk:.
Configuration register is 0x2102
Air-COR-01#show l2tun session all
L2TP Session Information Total tunnels 1 sessions 1
Session id 1878828549 is up, logical session id 42736, tunnel id 1043662242
  Remote session id is 3769661188, remote tunnel id 3529463940
  Locally initiated session
  Unique ID is 0
Session Layer 2 circuit, type is Ethernet Vlan, name is Port-channel2.532:532
  Session vcid is 532
  Circuit state is UP
    Local circuit state is UP
    Remote circuit state is UP
Call serial number is 2074100010
Remote tunnel name is Wlg-COR-02
  Internet address is 210.48.12.105
Local tunnel name is Air-COR-01
  Internet address is 210.48.12.100
IP protocol 115
  Session is L2TP signaled
  Session state is established, time since change 03:47:28
    48 Packets sent, 58 received
    6645 Bytes sent, 8437 received
  Last clearing of counters never
  Counters, ignoring last clear:
    48 Packets sent, 58 received
    6645 Bytes sent, 8437 received
    Receive packets dropped:
      out-of-order:             0
      other:                    0
      total:                    0
    Send packets dropped:
      exceeded session MTU:     0
      other:                    0
      total:                    0
  DF bit off, ToS reflect disabled, ToS value 0, TTL value 255
  Sending UDP checksums are disabled
  Received UDP checksums are verified
  No session cookie information available
  FS cached header information:
    encap size = 24 bytes
    45000014 00000000 ff73fe48 d2300c64
    d2300c69 e0b07704
  Sequencing is off
  Conditional debugging is disabled
  SSM switch id is 14061, SSM segment id is 5875
%No active PPTP tunnels
Air-COR-01#
Air-COR-01#
Air-COR-01#
Air-COR-01#
Air-COR-01#show run int
Air-COR-01#show run interface Po2.532
Building configuration...
Current configuration : 123 bytes
interface Port-channel2.532
 encapsulation dot1Q 532
 xconnect 210.48.12.105 532 encapsulation l2tpv3 pw-class l2tp
end
Air-COR-01#
Air-COR-01#
Air-COR-01#show run | beg pseudowire
pseudowire-class l2tp
 encapsulation l2tpv3
 ip local interface Loopback4770
air-agg-1-1#show mac address-table vlan 532
Legend: * - primary entry
        age - seconds since last seen
        n/a - not available
        S - secure entry
        R - router's gateway mac address entry
        D - Duplicate mac address entry
Displaying entries from DFC switch [1] linecard [1]:
     vlan   mac address    type   learn    age                 ports
----+----+---------------+-------+-----+----------+-----------------------------
      532 0050.569e.681d  dynamic  Yes      150     Po7
      532 0050.5695.0f0c  dynamic  Yes      320     Po7
  R   532 0008.e3ff.fc04   static   No       -      Router
WLG-AGG-01#show mac address-table vlan 532
          Mac Address Table
Vlan    Mac Address       Type        Ports
 All    0100.0ccc.cccc    STATIC      CPU
 All    0100.0ccc.cccd    STATIC      CPU
 All    0180.c200.0000    STATIC      CPU
 All    0180.c200.0001    STATIC      CPU
 All    0180.c200.0002    STATIC      CPU
 All    0180.c200.0003    STATIC      CPU
 All    0180.c200.0004    STATIC      CPU
 All    0180.c200.0005    STATIC      CPU
 All    0180.c200.0006    STATIC      CPU
 All    0180.c200.0007    STATIC      CPU
 All    0180.c200.0008    STATIC      CPU
 All    0180.c200.0009    STATIC      CPU
 All    0180.c200.000a    STATIC      CPU
 All    0180.c200.000b    STATIC      CPU
 All    0180.c200.000c    STATIC      CPU
 All    0180.c200.000d    STATIC      CPU
 All    0180.c200.000e    STATIC      CPU
 All    0180.c200.000f    STATIC      CPU
 All    0180.c200.0010    STATIC      CPU
 All    ffff.ffff.ffff    STATIC      CPU
 532    0050.5695.0f0c    DYNAMIC     Po2
 532    0050.569e.681d    DYNAMIC     Po4
Total Mac Addresses for this criterion: 22
WLG-AGG-01#

What does your ACL statement look like for defining access from your Celerra_Replication network, to your GP_Celerra_Replication network?
Also, do you reference that ACL in your crypto map?
A sanitized config may help me help you
-Chris

Similar Messages

  • TS-OPUI shows Passed but there are fail-tests - why?

    Hello,
    i am using TS4.2.1 and LV8.6 in WIndowsXP. There i use the default TS-OPUI.
    In the TS-OPUI there is in the left side a Execution-list with a final-result Passed/Failed and a color green/red.
    When i click on a execution then it shows me on the right side the report of this execution.
    Now i have the problem that TS shows a final result of PASSED but there are some fail-tests in the sequence that are shown in the report.
    How is this possible?
    Thanks

    I am getting nearer...
    When the error occurs then Teststand shows me the RunTimeError-occured-popup (screenshot).
    When selecting here: runCleanup -> then the result goes on Pass
    When selecting here: ignore -> then the result goes on Fail.
    I am sure that it is somewhere in the model.
    Because when using the default-model (and not my custom model as above) then the result is going correct on Error when selecting runCleanup.
    The question is nonly: Where is this set?
    Attachments:
    RunTimeError.jpg ‏59 KB

  • Signed up for enterprise distributions, but links are failing

    Hi guys and gals,
    I am filling the links after signing up to enterprise distributions for Acrobat Reader (and Air): Adobe - Adobe Reader Distribution.
    However, when selecting Windows 7 - English - 11.0.10 - it eventually leads to http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.10/en_US/AdbeRdr11010_en_US.exe which fails to load.
    (The same goes for Download Adobe AIR Runtime | Adobe - clicking on "Download the installer" for Air leads to a page that cannot load.)
    Is anyone else experiencing these issues? I've expressed these issues to @AdobeCare, however they pointed me here.
    Regards,
    Stephen

    Sorry, I don't have any problems downloading the installers from the three links you provided.  It may have been a temporary glitch; please clear your browser cache, then try again.

  • TS1702 I have purchased some episodes of a tv series but they are failing to download - how do I fix this?

    I have just got an iPad and attempted to purchase some tv episodes and they download until the end when I get a message saying "unable to download episode" can anyone help please?

    Dear Mr. Churchill,
    Anastasia here. Same problem. Restarting the device does not help. The new episodes show in my Apple MacBook Pro (OS 10.8.5) Itunes (11.1.3(8)), but not in the Apple TV device. Both have the same Apple ID, I have restarted, log on /off both devices several times and the problem remains: last week's episode of 3 different series will not download.
    This has happened to me on several occassions, each time something else solves de problem. I have been having the probem since the last Apple TV software update. It is usually after software updates that this type of problem appears.
    I can also see the new available episodes in my Iphone 5.iOS6 (I have not installed yet the iOS 7.0.4)
    What is going on? How do I solve it now? I have tried everything that worked in the other instances, but nothing is working now. Please answer to [email protected] Big thanks.
    Another question: What is the different between "Restart" and "Resert" of the Apple TV device? What will I loose if I reset, instead of restart, which I have done till now. Will it solve the problem?
    Big thanks,
    Anastasia
    [email protected]

  • Maintanence plan jobs are failing

    Dear All,
    We are facing problems with maintenance plan jobs in SQL server 2012. All jobs are failing with Following error
    Executed as user: Testdbserver\SQLadmuser. Microsoft (R) SQL Server Execute Package Utility  Version 11.0.3431.0 
    for 64-bit  Copyright (C) Microsoft Corporation. All rights reserved.    Started:  2:35:25 PM  
    Could not load package "\Maintenance Plans\Db_Backup" because of error 0x80070005.  
    Description: Access is denied.  Source:   Started:  2:35:25 PM  Finished: 2:35:26 PM  Elapsed:  0.094 seconds.  
    The package could not be loaded.  The step failed.
    Server details are: windows 2008 server with sql server 2012 ENT with core based licence. And SQL server , agent services are running with user 'SQLadmuser' (Nonadmin windows user). SQLadmuser is
    having sysadmin server roleand in windows its nonadmin userid.
    SQL Server maintenance jobs are running under sql server agent service account(by default) but jobs are failing. So After that i have created
    credentials with proxy account and i have run those jobs with proxy account, all jobs are executing well with proxy.
    or If iam changing SQL server, agent service accounts from SQLadmuser  to
    local system the maintenance jobs are working perfect.
    I have cross verified all permissions and assigned SQLadmuser previlizes to the folders,root folders and regisries but still jobs are failing .
    Note: I have observed that some of SQL server related groups are not displaying in local groups and iam unable to find tose groups. one below are reflecting.
    1. Is there any relation with this sql groups to run the jobs?
    2. Why this jobs are not working with sql server agent service account?
    3. Does this create problems to whole SQL server instance in future?
    4. Running jobs with proxy account will be having any impact on server?
    Could you please help me to trouble shoot the maintenance jobs, Also sharing screenshots for reference.
    Thanks in advance,
    Nagesh
    Nagesh

    Hi Nagesh,
    For many of the maintenance plans which require access to file system you might have to give access for the SQL Server Agent account directly to those folders. Otherwise your SQL Agent wont have access to the file system. This is why your maintenance plan
    jobs like backups are failing.
    Now the best way of dealing with this issue is what you have done. Using proxy accounts. By using proxy accounts you are not giving any additional privileges to your SQL Agent account. There is no issue for using proxy accounts for SSIS packages or Maintenance
    plans where you need access outside of SQL. Infact proxy accounts are introduced for this purpose, so that Agent account can impersonate the credentials in the proxy and run the job in its security context.
    The reason why the jobs are successfull when you change your SQL Agent account to local system is that Local System account has access to the local file system.
    http://technet.microsoft.com/en-us/library/ms189064(v=sql.105).aspx
    HTH
    Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

  • Ping db failed but db permission successfull

    Hi All,
    I am installing community blog (family). When the installer asks for Testing the connection I get "Ping Db failed" where as "Ping Hello Cs" and "Db permission" are successful.
    Please help.
    Thanks,
    Pratush

    Hi Pratush,
    I have faced the same problem, but in my case issue was related to version. In my case i was using Oracle WebCenter Sites 11.1.1.6.0 and i picked community blog family from Oracle WebCenter Sites 11.1.1.6.1.
    Abhishek

  • Transport fails: reason u201Cinactive infoObj", but infoobj are "active"

    Hi,
    In the attempt to move some transport requests from Dev to Quality, Basis reports of some errors:
    Error when checking the InfoObjectCatalog ZCCCCCCCCC 
    InfoObject ZXXXXXX is not available in active version
    InfoObject ZYYYYYY is not available in active version
    InfoObject ZPPPPPPPP is not available in active version
    I went back to the infoobject maintenance view of each of these infoobjects and they all show:
    Version: Active   (Saved) and with the green square.
    So, why is the transport log (se09) showing that these infoobjects are inactive, and hence preventing the move from Dev to Quality, while the objects are truly active?
    Basis canu2019t move this request until this issue of inactive infoobjects are resolved but they are truly active. Any ideas on this
    Thanks

    Hi,
    You are right, all the infoobjects which were reported as inactive, are now in the QA system as u201Cinactiveu201D. Some were entirely new objects and some were modified objects.
    So now, what did you mean by saying
    u201Cif they are inactive, you will have to transport them again & re-import the failed requestu201D
    i) What do you mean by u201Ctransport them againu201D?
    Just ask basis to move same Transport Request a second time? If so, what will be the difference between this new request and the previous one which failed? Wonu2019t this also fail?
    ii) Or, do you mean to collect these infoobjects again under a different Transport Request number; release it and ask Basis to move this new requests to QA?
    a) Also, what do you mean by u201Cre-import the failed requestu201D the failed request? Give the same failed transport request number to basis to transport?
    b) So in a way, although the objects are u201Cactiveu201D in DEV, somehow, the Transport process deactivated them on their way to QA?
    Do you therefore think BASIS caused this in their process to u201Cmoveu201D the objects to QA?
    Thanks

  • I have 2 apps that have been waiting to update for a week.  I don't really care about the update, I would just like to use them, but the are stuck waiting.  I have tried powering down, syncing with my computer...all fails.  Any ideas?

    I have 2 apps that have been waiting to update for a week.  I don't really care about the update, I would just like to use them, but the are stuck waiting.  I have tried powering down, syncing with my computer...all fails.  Any ideas?

    At this point you have no choice but to update the or delete them and reinstall them since you wont be able to use them until they update - or come out of the "waiting" loop.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

  • Hi!I was restoring my MacBook pro to its factory setting by erasing the disk and reinstalling OS X lion via internet.but it is failing telling me that my network is very slow while I used the best network in the area.How sld I get an OS X lion to my CP?

    Hi!I was restoring my MacBook pro to its factory setting by erasing the disk and reinstalling OS X lion via internet.but it is failing telling me that my network is very slow while I used the best network in my area.How should I get an OS X lion to my CP? Is it possible to get it from another MacBook pro?Or is it possible to recover the erased OS X Lion without or with external disc?
    Thank you

    Hi OGELTHORPE!
    Thank you for your advice but I don't know where i can get it and where to get it. Also I don't know also how to use it.
    Could you please keep on helping me?
    Regards!

  • Server 2012 Built-In IPSec VPN & RAS & HyperV-Switch & Netgear Pro Safe Router, Tunnel Ok, but no Traffic

    Hello,
    i try to setup a IPSEC VPN (Site-by-Site or if not possible Client-BySite) between a Netgear Pro Safe Router and Windows Server 2012.
    The Problem: Tunnel is up and running, but no Ping, no traffic at all.
    the Server 2012 uses HyperV and has one hardware-NIC with public ip, lets say 123.123.123.1.
    if no site-by-site is possible in my situation with built-in-tools this server would be only a client-site which would "dial-up" to the netgear box.
    the server has a second virtual NIC with IP 192.168.137.1. Routing and RAS is enabled, because there are two virtual other servers whichs has 192.168.137.2 and 192.168.137.3.
    The Netgear-ProSafe has public ip 122.122.122.1 and LAN-Subnet 192.168.21.0/24.
    I created the Tunnel in the Advanced-Firewall-Options-Window. Both, Windows and the Router, say, the VPN-Tunnel is okay. Also, i can see ESP-Packets with wireshark.
    If i ping (from router to server and other direction) i get no response. Some people said, the RAS itselfe could not accept packages, but i tried from one of the virtual clients also (192.168.137.2) and no ping there also.
    i tried to add a route for subnet 192.168.21.0 with 192.168.137.1 as gateway but that didn't helped also.
    now, after all this time i spend today to this problem i'm a bit confused.
    as i know vpn-connections there are always virtual devices, and routes for the vpn-subnets assigned to this device.
    the windows firewall does not create any device, and it does not create any route - i suppose, this is because "routing and ras or windows firewall-service" does this work "internally". is that correct? do i need any routes?
    i was wondering why the ICMP packet from my ping in wireshark had the public ip as source (123.123.123.1) and not the "internal" 192.168.137.1 - and i tried to restrict the vpn-rule only for the virtual internal NIC but this isn't possible, as
    it is no option inside the gui.
    it would be great if somebody could explain me how config and packages SHOULD look....i've never used the built-in vpn/ipsec/ras services before, so i don't know how things has to be for a correct working environment. also, i need a solution and any help
    to solve the problem would be great also!
    now i try to sleep one night - maybe i get some nice idea after some hours of sleeping. good night.
    Addition: After some more tests i find out that if i change the local endpoint (endpoint 1) from the virtual network (192.168.137.0/24) to the public ip of the server (123.123.123.1) inside the tunnel-rule and inside the vpn-policy of the router i can access
    the netgear and other devices in the remote-network 192.168.21.0 over this ip-adresses. ping is not working, but other things seems to work fine. i want to be able to ping as well ofcourse and this wired configuration looks wrong to me...can some network-professional
    help out with an explanation?
    Second Addition: I can set the Local Endpoint also to "any" and it does work - but ping still does not work :-(
    Third Addition: The Ping does work if i disable the NAT-Functionality on the Physical NIC. ....mhm.....

    I would definitly recommend the usage of a virtual router instead using windows onboard-firewall to make the site-to-site tunnel!
    as you can see in my linked thread above (Link)
    this scenario is not supported from microsoft! you will run into problems!
    we do run a hyperv virtual machine and install the wonderful distribution pfsense inside this box. pfsense is a software-linux-router with ipsec-functionality, which works like a charm!
    and by the way i recommend to not use the products of netgear! they are expensive, very slow and the service is not good!
    we have good experience with Vigor-Routers! They are less expensive, the Service is very good, and the devices are much faster, AND! ...the vpn-connections stay stable up!
    this experience was very time-intensive to make! hope this will help someone else in the future.

  • Portfast case ping transmit failed general failure

    Hi
    today i add a host in a vlan, but it can't ping itself and get  ping transmit failed general failure unless remove the spaning portfast command. i try difeerent vendor PC, IBX... ,HX..,DXl..., all host can't ping itself.
    the reason is the portfast? but portfast isn't only fotr host pc,
    the following is same our command about spaning.sorry for i can't past all command because our com private.
    errdisable recovery cause udld
    errdisable recovery cause bpduguard
    errdisable recovery cause security-violation
    errdisable recovery cause channel-misconfig
    errdisable recovery cause pagp-flap
    errdisable recovery cause dtp-flap
    errdisable recovery cause link-flap
    errdisable recovery cause gbic-invalid
    errdisable recovery cause l2ptguard
    errdisable recovery cause psecure-violation
    errdisable recovery cause dhcp-rate-limit
    errdisable recovery cause unicast-flood
    errdisable recovery cause vmps
    errdisable recovery cause storm-control
    errdisable recovery cause arp-inspection
    errdisable recovery interval 30
    power redundancy-mode redundant
    no file verify auto
    spanning-tree mode pvst
    spanning-tree loopguard default
    spanning-tree portfast bpduguard default
    spanning-tree extend system-id

    what do you see under "show interface status" of the switch when the issue occurs?
    do you see input/output rate on that interface when the issue occurs?
    what is the spanning-tree state of that port?
    when you say you get "ping transmit failed", are you getting that error when you try to ping the PC's IP address from the PC?
    are you able to ping 127.0.0.1?
    and, what does the PC's network connection say?

  • OBIEE 11g agents are failed to connect to Essbase

    OBIEE 11g agents are failed to connect to Essbase. We are using :USER & :PASSWORD (SSO) in connection pool setting to connect to Essbase.
    User account exists in both OBIEE and Essbase. OBIEE dashboards which are based on Essbase are working fine. Essbase variables in RPD are upto date.
    Only agents are failing and error says invalid credentials, but dashboard pages are running without any issue.
    OBIEE: 11.1.1.5 (BP4)
    Essbase: 11.1.2.1
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 96002] Essbase Error: Login fails due to invalid login credentials (HY000)
    Essbase and OBIEE services are up and running.
    Any help will be appreciated.

    We finally implemented CSS Token option and ended up with this error. We are unable to connect to essbase with CSS Token option.
    We followed the Oracle document to implement this.
    [nQSError: 43119] Query Failed: EPMCSS-00301: Failed to authenticate user. Invalid credentials. Enter valid credentials. (HY000)
    We did update this property:
    JAVA_PROPERTIES="-Dplatform.home=${WL_HOME} -Dwls.home=${WLS_HOME} -Dweblogic.home=${WLS_HOME} -Didstore.identityAttribute=objectguid"
    Any help will be appreciated!

  • I tried to update to the most recent itunes, but the update failed and now when I try to open itunes a dialog box pops up and tells me that it can.t open because MSVCR80.dll is missing.  I need help!

    I tried to update to the most recent version of itunes but the update failed.  Now when I try to open itunes I get a dialog box telling me it can,t open because MSVCR80.dll is missing.  I tried uninstalling and reinstalling itunes but I grt the same message.  What can I do to fix this?

    Solving MSVCR80 issue and Windows iTunes install issues.
    Thanks to user turingtest2 for this solution.
    Solving MSVCR80 issue and Windows iTunes install issues.
    If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    You may be required to boot into safe mode to complete the folder deletion process.

  • HT204406 Hello,  I have songs that show they are "Waiting" for download from the cloud but they are greyed out.  Some songs in one album are done others in the same album will not download. It is not a time function because i have been working on this for

    Hello,  I have songs that show they are "Waiting" for download from the cloud but they are greyed out.  Some songs in one album are done others in the same album will not download. It is not a time function because i have been working on this for weeks. I have allowed my compter to run for days and the songs are still not accessible.  I have a Match subscription and Match is working.  If I click on the "Genre" link the greyed out songs show that they are ready for download from the cloud but I cannot download them.  I have downloaded over 1500 other songs, so I am trying to understand what is going on here. I would appreciate any help anyone can give me.
    Thanks

    I did think about that and if I have to I will do that, however there are about 50 songs. I have closed and reopened iTunes several times and I am sure that I have the latest version. It fails right away but I can click on the cloud download icon and download the song that it failed on ... therefore it is not that song "or any one song" causing the issue. Any ideas?

  • OfficeJet 7500 won't print via WiFi anymore even though pings are successful

    This is a new OfficeJet 7500 All-in-One that I have been trying to get set up over the weekend but have run into problems.
    First here is the system data:
    From the EWS printer information page:
    Product name: OfficeJet 7500 E910
    Product Model Number: C9309A
    Firmware Version: EMP1FN1126AR
    From the Wireless Network Test Report printed out Jan 23 2012 9:07 AM:
    No problems found. Congratulations on the successful setup of your wireless printer.
    Diagnostics Summary
    Wireless On: Pass
    Wireless Working: Pass
    Network Name (SSID) Found: Pass
    Security: Pass
    Printer Settings Consistent with Wireless Router Settings: Pass
    No Filtering: Pass
    Connected: Pass
    Signal Quality: Excellent
    Other networks detected matching your network name (SSID): No
    Wireless Networks Detected: 10
    Disconnect count total: 32
    Disconnect count (last hour): 0
    Disconnect count (last 24 hours): 5
    Channel: 1
    Configuration Summary
    [Shows correct network name]
    Hardware Address (MAC): [will report if it is needed]
    IP Address: [It is static and working--pings are successful]
    Configuration Source: Manual
    Communication Mode: Infrastructure
    Authentication Type: WPA-PSK
    Encryption: Automatic (AES or TKIP)
    The Network Configuration Report concurs with the info above and also shows that the nearest three 802.11 networks are at least five channels away from mine, but the fourth nearest one (with a signal value of -83: mine is -21) is the same as mine (channel 1).
    The computer I'm using is a MacBook running OS X 10.6.8
    Things I have done:
    Confirmed that MAC filtering is disabled.
    Tried to figure out the router firewall. As far as I know, it is ordinary, and there are no other firewalls installed anywhere. I don't know how to determine if this is a firewall issue.
    Rebooted everything many times, being sure to turn the router back on before the printer.
    Uninstalled and reinstalled via USB cable the full driver package downloaded from the HP website.
    Assigned the printer a static IP address.
    Changed the channel in the router.
    Disabled and re-enabled Bonjour.
    Searched the forums.
    The problem I'm having is that when the print queue says that the printer is ready and I send a print job, it looks for the printer a few moments and then says that the printer is offline. Nor can I print from my iPad or iPhone (although at first I could). At first I discovered a workaround by turning off the WiFi radio on the printer and then turning it back on, and for a very short time (a minute or two) after that, the printer would show up in the queue as "connected" and the job would print. This workaround no longer works. I don't know if any of the changes I made correspond with that.
    Rebooting the printer is another workaround I discovered that continues to work, but only for a few moments. If I send a print job right away or a job is waiting in the queue, it will print it right after I turn the printer back on, but then everything goes haywire again. Rebooting the printer with the HP Utility window open produces alternating popup windows reporting attempts to connect to the printer and then reporting that it can't connect. They alternate at a sort of frenzied pace for a minute or so and then the "can't connect" popup stays. After a while, if the HP Utility window stays open, the frenzied popups return .The rest of the time the HP Utility says the printer is not available, even when pings are successful, even when I can access the EWS, and even when the printer is actually printing a job.
    I can't seem to figure out what Bonjour is or what it does despite reading about it on the Apple site. Here is how it has been behaving: When I reboot the printer it shows up on the Bonjour list, but when I click on it there, it disappears and a Safari popup says that it can't find that printer server. Disabling Bonjour seemed to change nothing, and re-enabling it seemed to change nothing either.
    So that's the data. Thanks in advance to whoever can shed some light.

    Hello Sindigirl,
    Thanks for the detailed information. And from that information, I can allready see that we are dealing with a intermittent bonjour connection. Bonjour is the protocol that all apple systems work with, they have the option to automatically detect new devices in your network.
    From what I can see, you did about everything humanly possible to resolve the issue. If however the router that you used always has worked fine and did not cause any network issue's whatsoever, the giving the router a powercycle should often resolve the issue if it is a bonjour compatible router, if possible, please report the manufactuar of the model that you have and its model number.
    For a workaround so that you can at least print you can use the following steps. Please note however, that scanning will not work with the workaround, since this is bonjour dependant.
    [1] Go to Apple/sys. pref./Printer and faxing.
    [2] Click on the[+] to add a printer
    [3] Instead of [Default] in the upper tab, select [IP].
    [4] Switch LPD (line printer deamon) to HP Jet Direct Socket.
    [5] Fill in the printer IP adress at the the Option [IP]
    [6] Leave the printing queue blanc
    [7] Rename the printer [Should have the IP adress as name at the moment]
    [8] Leave location blanc aswell
    [9] Select [Add printer software] If a list pops up, the use the filter to lookup the 7500 driver, if found or allready reported then click add printer.
    You can now print without any issue via direct IP printing. Please let us now what router brand and model you got.
    Sorry for any typo's.
    Kind regards,
    van Baardewijk

Maybe you are looking for