L7780 hung up, Message "cartridge to expire, replace or hit OK to continue. even test print no go

L7780 worked fine for two years. Got a message " cartridges to expire, replace or hit OK to continue". Basically froze up. Wont' shut off. Pulled power off and on, and got screen saying "Aligning Printer" this never changes. Push off button, says shutting down but never does. Tried to print a test page but never gets past the que. Done the the usual reboot, etc. Don't know where to go next

I'm having this same issue. Have you found a solution?

Similar Messages

Photosmart C7280 All in One error notice saying out of yellow ink when cartridge has been replaced

Hello Forum members...I hope you can help me.
When I try and print something I get an error notice which says that I must replace the yellow ink cartridge and telling me I can print in Black only (which is fine because i usually use the greyscale fast print option anyway). However the worrying thing is that the error notice also says that if I do not replace the yellow cartridge then the printer will cease to work.
I did replace the cartridge quite some time ago. An HP cartridge from HP online. The cartridge is showing full on the bar chart display and yet still the error notice comes up when I try to print.
I hardly use the printer. I am a retired person who may occasionally print out the odd letter or email (I would say on average 2/3 pages per 2/3 weeks.) I very, very occasionally print the odd photo....say twice a year 6 photos.
I got the printer in 2008. This was a replacement FOC for an earlier model of the same type. It was one month out of guarantee when the earlier printer did exactly the same thing. I had just replaced several cartridges (the first replacements). The printer was eventually replaced by the store I had bought it from because they could not repair it. It just stopped functioning. Some computer type glitch
I am now afraid that if I do not act soon then this printer will seize up and be irrepairable.
I do hope some teccy member of the forum will be able to help me.

mine has an error notice that says yellow ink cartridge is empty ( when trying to print something off of the internet) though I have tried 3 new full ones.It also had a message that my printer could print black only. I've been angry for 2 days.
Now, I found out my computer is lying to me! I decided to print a blonde hairstyle I liked off the internet and I hit "black only" since that's my only option. But, it printed in color. I realized I've missed 2 days of being able to print off the internet because my computer or printer was lying.

I am trying to use a interactive form and it says "If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document." This is a IRS form and has worked before.

I am trying to use a interactive form and it says "see below" This is a IRS form and has worked before.
is there a tech support phone number?
Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF
viewer may not be able to display this type of document.
You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by
visiting http://www.adobe.com/go/reader_download.
For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader.
Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark
of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries

That means you are looking at the form online with a browser that uses its own (incompatible) PDF viewer, not the Adobe Reader plugin.
Either
download the form to your local disk and fill it from there
use a browser that employs the Adobe Reader plugin
configure your browser to use the Adobe Reader plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

I cannot open a PDF in either Chrome or Firefox. I have uninstalled and reinstalled Adobe Reader XI.0.09 and restarted my computer. This is the error I receive:Please wait... If this message is not eventually replaced by the proper contents of the do

I cannot open a PDF in either Chrome or Firefox. I have uninstalled and reinstalled Adobe Reader XI.0.09 and restarted my computer. This is the error I receive: Please wait... If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document. You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/go/reader_download. For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.

Or http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

How to Handle Queue Message with NO expiration

I come across a situation where i need to dequeue same message multiple times and upon reaching valid condition only i can discard the message. For this situation i can create a queue that has message expiration set to NEVER. But i didn't find the way to delete the message that has expiration NEVER.
Can anybody help me what will be the best approach to delete messages that has no expiration. My business case allow me to delete that message only after reaching a particular condition.
Regards

In what version?
SELECT * FROM v$version;

Work Item - Step History - Message: Reserved work item replaced ??

Hello all,
I am currently trying to understand what went wrong with one of our WF. When I look at the "technical log" of the WF and I select one specific step, I see the following messages under the STEP HISTORY tab:
Dialog work item created - No Errors - JOHN - 06.05.2010 - 16:17:17
Execution started automatically - No Errors - JOHN - 06.05.2010 - 16:17:17
Reserved work item replaced - No Errors - JOHN - 06.05.2010 - 16:19:01
Agent determination for step '0000000001' failed - PAUL - 06.05.2010 - 16:19:11
I am trying to understand what caused the 3rd message (Reserved work item replaced) to be added the log.
Anyone knows the answer ?
PS: I know what caused the RED message about agent determination.
Thanks in advance.
José

Dear PAQUEJO
Could you let me know the root cause or solution for this.
I am also facing the same issue for the last 3 weeks.
Below is the work item step log:
       PI_MDM_ USR               Dialog work item created                 12.01.2011 08:16:53
       Olivia Ye                 Execution started                        12.01.2011 08:19:31
       Olivia Ye                 Reserved work item replaced              12.01.2011 08:20:31
       Olivia Ye                 Execution started                        12.01.2011 10:02:30
       Olivia Ye                 Reserved work item replaced              12.01.2011 10:03:12
       Olivia Ye                 Execution started                        12.01.2011 10:03:43
       Olivia Ye                 Reserved work item replaced              12.01.2011 10:03:50
       Olivia Ye                 Execution started                        12.01.2011 10:04:00
       Olivia Ye                 Reserved work item replaced              12.01.2011 10:12:16
Your help is highly appreciated.
Regards,
Raja Ram.

Returned message login timeout expired linked server

OLE DB provider "SQLNCLI" for linked server "SERVER" returned message "Login timeout expired".
OLE DB provider "SQLNCLI" for linked server "SERVER" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default
settings SQL Server does not allow remote connections.".
Msg 53, Level 16, State 1, Line 0
Named Pipes Provider: Could not open a connection to SQL Server [53].

Hi Lukesh,
According to your description, you cannot connect to one of your linked servers with the error "Login timeout expired", right?
If in this case, please follow the troubleshooting methods below on the linked server.
Select "Using both TCP/IP and named pipes" in SQL Server 2005 Surface Area Configuration.
In SQL Server Configuration Manager, make sure that TCP/IP is enabled for the Network protocol.
If you turn on the Firewall, make sure the TCP port 1433 is in the Firewall exception list.
Reference
http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/
If the issue persists, please provide us more information, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support

Pop Up message for Contract expiration dates

Hello, Experts,
I am looking for a way to customize (If it's possible) a message as a pop-up.
The message I want to become a pop up is the message about the expiration
date of a contract, which is displayed when creating a SC from an expired contract.
Thank you for the help !
Regards,
Rami Kleiman
HP

Hi
Contracts can be monitored by scheduling jobs so that Buyers get notification on fund / valid period by .bbp_contract_check
contracts validity / fund can be indeed refered while shopping cart turn to purchase order.
Hope you could have refeered Ricardo article on this
http://wiki.sdn.sap.com/wiki/display/SRM/Contractvalidationdoesnotoccurwhencreatingashopping+cart
Muthuraman

Nokia Messaging promotional period expires on 31st...

When I started using Nokia Messaging for my emails I got an email explaining how it was free but I may have to pay data charges to my service provider. That's all fine, but at the bottom of the email this was written:
"Nokia Messaging promotional period expires on 31st May 2010"
What happenes then? Do I have to pay?

Open http://email.nokia.com
Login with your Nokia Messaging e-mail and password.
At the bottom:
My subscription
Plan: Nokia Messaging trial
Subscription status: Active
Expiration: 1 Jan 2010
Smile is Health. Keep your Smile

SCCM 2007 - task sequence - prestaged media - self-signed certificates - error message 'Certificate has expired for this media'

Hi there
Quick scenario.
We have created a task sequence prestaged media .wim file (SCCM 2007, client OS is Windows XP).
Recently some of these swap-out machinses, on delivery and start up, have started showing this message:
'Certificate has expired for this media'.
This is because the self-signed certificate created during the prestaged media creation process has expired.
My question is: is it possible to mount the image using dism or imagex and then inject an updated sertificate?
Best regards
John

the disk that has the prestaged media applied must be the boot partition.
create a task sequence to stage the prestaged media. In this task run a format and partition step which configures both the system disk and the os disk, though make the os disk the active boot partition. Then apply the prestage wim.
On your deploy task, somewhere after the OS has applied create a group that runs only if the media is OEM (from memory _SMSTSMedia =
OEMMedia)
in this group run the command bcdboot C:\Windows /s F: /f ALL where f: is the drive letter assigned to the system disk, then run another step that removes the drive letter and reboots. The deploy task will now continue and you will be booting to the system
partition.
So I wanted to get back to working on this issue. I noticed that when I said it Worked that it was actually still booting from C drive instead of the reserved partition. For the past few days I have been trying to get the prestaged to work like
a network deploy but fail every time. I cannot get the prestaged to boot from any other partition other then the partition where windows was imaged too.
So where I am at today. When I do as suggest above the D drive (The reserved Boot volume) return on reboot. it will not stay hidden. also the OS is till booting from C and does not change to the D drive or no drive letter drive with the above
commands. I think there is some other command missing that tells it to boot from a new location that is not bcdboot.
Has anyone seen any guides for how to use prestaged and bitlocker enabled task sequence? I think that would help me figure out my current issues as with bitlocker you must have this other partition.

WiFi printer which can work with one cartridge also at a time (black or color) in a colour printer

All-in-one (OfficeJet or Inkjet) WiFi printer which can work with one cartridge also at a time (black or color) in a colour printer.
Even if colour cartridge is over, w/o replacing I can still print with black cartridge.
Which printer is suitable.

Since I upgraded to Firefox 19 from 18.0.2, on my Windows XP (SP3) laptop, I, too, can no longer open a new window. File-->New Window does nothing; also can no longer tear off a tab and open it in a new window (it stays where it is). Also, if I right-click on a tab and select Move to New Window, nothing happens. All of these worked fine in FF 18.0.2. All of these work fine with FF 19 on Windows 7. Only an issue on my XP laptop.
After trying to open a new window, and not seeing the new window come up (and yes, I waited a long time), I decided to close my current window, which had multiple tabs open. Instead of just closing, it pops up the message reminding me that I'm about to close all those tabs. If I say close, and then go into the Task Manager, the Firefox application has disappeared (as expected), but the firefox (and plug-in container) processes are still running. So I have to manually kill the Firefox process to get it to quit. it's as if it thinks there is another Window open (the one I tried to open but never appeared). This happens every single time! I've restarted my laptop, and that does not resolve the problem.
Is there a way to downgrade back to v 18.0.2 until this is fixed?

Can I print with black cartridge only if colour cartidges are empty on HP C1600 seeries printer?

Can I print using the black cartridge only whilst the colour cartridges are empty? I have a HP Photosmart C1600 series printer and Vista installed on my PC. I have set the Printer preferences to "Grayscale and use Black Cartridge only" but the printer itself is telling me it wont print unless i replace my empty yellow cartridge. I bought a brand new Black cartridge so i could print using black ink only as i dont need to use colour.

Hi,
Many printers from all vendors will not print with just one empty ink cartidge, it doesn't matter which one. Some printers allow users to print but at slower than snail speed. Whichever way, we have to have ink carridges to be able to print (even scan).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My printer will not print in black ,i replaced the ink and now it will not print in black ink

my printer will not print in black ,i replaced the ink and now it will not print in black ink

Please read this post then provide some details. What printer model? What operating system? Are there any error messages on the printer or computer screen?
Is your printer still in warranty? You can check with HP's warranty tool here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Installed a new black ink printer cartridge in hp office jet 6500 e709n and it is not printing out

installed a new black ink printer cartridge in hp office jet 6500 e709n and it is not printing out anything with Black ink. I ran all the diagnostic tests including cleaning the cartridges, cartridge alignment, shut off the printer unplugged it, restarted, shut down computer retarted. All the other colors work except for the black cartridge. I checked the vent on cartridge and it is they way it should be. How can I print with Black Ink? very upset!!!! Have got to get something printed ASAP

I've got the same with a new black ink cartridge. The display keeps alerting that you have to renew the ink. Tha's oke but the printer does not print black/White.
Do i have to replace the collor ink also at the same time?
Does it mean that if you replace black and not the color that it's NOT possible to print b/w?

Getting error "Your session has expired. Restart this wizard to continue" when I create / configure service applications

Last week, I installed 3 virtual servers (WFE, APP and DB).
When I started to create the service applications on the app server, several of them gave me the following error at the end:
"Your session has expired. Restart this wizard to continue. "
Although the error occured, they actually are created. But I'm having difficulties with the Secure Store Service. I try to add a new Target Application and when I click Next, I get the same error.
I tried to delete the application and recreate it. Tried to stop/start the Secure Store Service. I'm doing this as a local admin on the server (which was also used for installation and configuration of Sharepoint).
No events in the eventlog. There is some logging in the ULS :
01/05/2011 15:44:11.71 w3wp.exe (0x102C)                       0x00E4 SharePoint Foundation
Topology                      rzlc High    The current state '_admin/sssvc/managetargetapplicationinstance.aspx'
doesn't match the Page '_admin/sssvc/managetargetapplicationfields.aspx' 73d50e6f-d63e-4cb8-b13b-2a6d50deb1d6
01/05/2011 15:44:11.71 w3wp.exe (0x102C)                       0x00E4 SharePoint Foundation
Runtime                       tkau Unexpected Microsoft.SharePoint.SPException: Your session has expired. Restart this wizard
to continue.    at Microsoft.SharePoint.Administration.SPScenarioContext.GetContext(Page page, CultureInfo culture)     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageTargetApplicationFields.OnLoad(EventArgs
e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 73d50e6f-d63e-4cb8-b13b-2a6d50deb1d6
The funny thing is... the service applications which I expected to give me some kind of trouble, are working perfect (User profile sync, Search). I installed numerous servers in the past 3 months and this is the first time I'm running into this and it's
driving me crazy.

After searching and searching, I found something...
http://social.msdn.microsoft.com/Forums/eu/vsreportcontrols/thread/ca916bff-e996-41a2-b547-16542a298c39
And the first reply caught my attention.
It says that if your servername contains an underscore, these kind of errors might occur.
And for sure, my servernames contain underscores. DOH!
I'm going to change it and recreate the farm... just to be safe. Will get back with the results.
Did renaming the server help?

L7780 hung up, Message "cartridge to expire, replace or hit OK to continue. even test print no go

Similar Messages

Maybe you are looking for