Label and textfield flipped (180 degree)

i'd like to make an app with a pane divided in 2.
on the bottom part i have button, label, textfield normally displayed,
on the upper part i'll have other button, textfield ecc, rotated of 180 degree.
how can i make it?
thanks

i'm new to interface builder, i'm not able to find where i can change rotation of an object...
but perhaps i have found something following your suggestion:
#define RADIANS(degrees) ((degrees * M_PI) / 180.0)
CGAffineTransform rotateTransform = CGAffineTransformRotate(CGAffineTransformIdentity,
RADIANS(30.0));
myButton.transform = rotateTransform;
there is a way to make it in interface builder?
thanks

Similar Messages

Labels and textfields - easy way to

I am doing a little form which is a bunch of textfields, I want to label them.
is there an easy way to do this rather than defining a label then fussing around with gridbags to get the layout right.
also I do not need to keep the labels and stuff, is there a way to create a tmp panel and a tmp label and then reuse these objects for each textfield? or do I have to just create them all, that seems a little messy.
Thanks

I don't know what 1.1 compatibility has to do with it, if it's a swing problem, switch to awt (take away the J)
String[] labelText = {"Textfield 1: ", "Textfield 2: ", "Textfield 3: "};
JTextField fields[];
// constructor
fields = new JTextField[labelText.length];
for(int j=0;j<labelText.length;j++)
    JPanel temp = new JPanel();
    temp.setAlignmentX(Component.RIGHT_ALIGNMENT);
    temp.add(new JLabel(labelText[j]));
    fields[j] = new JTextField(10);
    temp.add(fields[j]);
}Now it doesn't matter what length your labels are, your temp label is right-aligned, and all the textfields will be the same size (10).
Note: You may have to reverse the order you add label/textfield, not sure since it's right aligned.
HTH,
Radish21

Image Flips 180 degrees

I am using vision builder AI 2010. I am having an issue where the image will flip its orientation while running in the inspection. Has anyone heard of this issue or maybe have some insight into why the image would rotate 180 with the same inspection steps. I am just using the acquire image step along with a Ueye GigE camera. Any help would be appreciated.

Use the IDS Imaging Labview Interface instead of DirectShow for communication. It is an interface that gives you access to their SDK function calls. It's much more comprehensive and seems to be more efficient. Download the drivers for either 32 or 64-bit from www.ueyesetup.com (top left of page) and install them. When it prompts you for what to install, select "complete".
After installing, download the Labview interface and install: http://en.ids-imaging.com/download-ueye-interfaces.html?file=tl_files/downloads/uEye_SDK/interfaces/...
Image mirroring is called through "SetRopEffect" parameter "IS_SET_ROP_MIRROR_LEFTRIGHT". You would then activate or deactive the function. It will always return a message, either IS_SUCCESS, or if not successful, one that points to the cause of the problem. Post the error codes if it still occurs.
The Labview manual is online: http://en.ids-imaging.com/manuals/uEye_SDK/EN/uEye_LabVIEW_Manual/index.html
The error codes are in the appendix.
Loren

Graphics and Textfields

I was wondering if you use Graphics and objects like Buttons, Labels, and TextFields are they all drawn on the same graphics layer or is one of them drawn on top, if so which one?

Are your components realy intersecting?
If you want two components to intersect, the last of them will be partly hidden.
import java.awt.*;
class myPan extends Panel
     Button but1;
     Button but2;
     public void doLayout()
          but1.setBounds(0, 10, 40, 40);
          but2.setBounds(20,5, 40, 50);
     myPan()
          but1=new Button("but1");
          but2=new Button("but2");
          add(but1);
          add(but2);
}In the code above, but1 will be partly hidden by but2.
Ragnvald Barth
Software engineer

Can't see my Label or TextField.

This is a very simple code but when I run the code I can't see my JLAbel or JtextField. The only way to see my Text Field is to hover over it and it highlights. But I want to be able to see both the Label and TextField once I run it. Any ideas? Thanx.
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.event.*;
public class Whore extends JApplet implements ActionListener{
     private int value=0;
     JLabel one;
     JTextField two;
     public void init(){
          Container c=getContentPane();
          c.setLayout(new FlowLayout());
          one=new JLabel("Enter a number");
          two=new JTextField(10);
          two.addActionListener(this);
          c.add(one);
          c.add(two);
     public void actionPerformed(ActionEvent event){
          if(event.getSource()==two){
          value=1;
          repaint();
     public void paint(Graphics g){
          if(value==1)
          g.drawString("dammit",20,20);
}

Swing questions should always be posted in the Swing forum. You are overriding the paint() method without calling the super class's paint() method.
public void paint(Graphics g)
   super.paint(g);
   //do whatever
}

Way to flip video 180 degrees?

I'd like to mount a monitor underneath a shelf... is there a way in software to flip the image 180 degrees?
Thanks,
Jeff

Both VLC and QuickTime Player (at least the Pro version) can rotate their output. If you have ATI graphics you can download ATI Displays to rotate the entire screen.

Can I import clips to FCP X at 180 degrees rather than flipping the clips individually once they are imported?

Can I import clips to FCP X at 180 degrees rather than flipping the clips individually once they are imported? I have about 300 clips all recorded upside down and i am looking for an easy solution.

Plenty of apps will rotate them.MPEG STreamclip has a batch function.
Russ

Aligning textfields, label, and scrollbars in a gridlayout

Hi,
I am making an application whose content pane has a null layout. I added a JPanel on the content pane and changed it's layout to gridlayout with 2 columns and 5 rows. I added 1 label, 4 scrollbars and 4 textfields to this. Now I want the Label to be at the top row occupying both the columns and the scrollbars to be aligned on the left side of the gridlayout and textfields on the right side. I used an array to declare my scroll bars and textfields. When I run my application the label, scrollbars and textfields are arranged very haphazardly. Can somebody help me on how to arrange these like i want to?
Thanx
Sugar

Hi!
Have you considered to use a GridBagLayout ??? Check it out...
/Andrew

[svn:fx-trunk] 10889: Add FTETextTests which check that a Label and NumericStepper configured to use FTEText have a textField and textInput , respectively, of type UIFTETextField and MXFTETextInput.

Revision: 10889
Author:   [email protected]
Date:     2009-10-06 09:29:53 -0700 (Tue, 06 Oct 2009)
Log Message:
Add FTETextTests which check that a Label and NumericStepper configured to use FTEText have a textField and textInput, respectively, of type UIFTETextField and MXFTETextInput. The components are configured via style properties rather than by theme which would require another version/compile of the BasicTests.swf.
QE notes:
Doc notes:
Bugs:
Reviewer: Alex
Tests run: basictests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/tests/basicTests/BasicTests-config.xml
    flex/sdk/trunk/frameworks/tests/basicTests/BasicTests.mxml
Added Paths:
    flex/sdk/trunk/frameworks/tests/basicTests/halo/scripts/FTETextTestScript.mxml
    flex/sdk/trunk/frameworks/tests/basicTests/halo/views/FTETextTests.mxml

I'm also having this problem. I'm using Flash Builder 4.6, AIR 3.4 and I've made a DLL (e.g. ExtensionDll.dll) which needs to call functions in another DLL (e.g. DllUsedByExtensionDll.dll) . I've made sure my ANE is working with the ExtensionDll.dll already, so there are no issues with my actionscript code or my ANE packaging or my DLL compilation. However, once I start calling functions from the other DLL, it starts throwing me Error #3500. Even if I call this function (e.g. abc()) in ExtensionDll.dll, but I never actually use the function from actionscript, and I call another function (e.g. def()) from actionscript, the Error #3500 still appears, so it does not seem to depened on the whether the code is used or not.
It's similar to this problem.
http://stackoverflow.com/questions/9823504/how-to-use-external-dll-in-air-native-extension
Does anyone have a solution or at least a way to debug this?

CR in vs 2005 (whatever version that it) - rotate a textobject 180 degrees.

I am sure that this horse has been flogged before ... somewhere ... but I have given up endlessly searching for it.
I need to rotate a report (onto a label, in fact) 180 degrees ... sometimes. The labels have a pre-printed footer and, depending on the label manufacturers, they may be inverted. I cannot trust that the user will be able to create a custom label to suit my needs so I must use a default 4"x2.5" portrate label as my "default" label.
I know that CR only allows limited rotation so how do I mimic a text object rotated 180 degrees?
Any ideas????

See if this helps:
[1205091 - Text rotation in web application using VS.NET 2005|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Also, make sure you have applied SP1:
https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Shouldn't 180 degree orientation be a standard for all iPad applications?

I find it curious that there isn’t a de facto standard for viewing angles on all third-party applications, and that some applications literally appear “upside down,” when trying to use the iPad in its case - with the easel flap tucked in - for landscape viewing.
Jonathan Ives’ eloquent “the device conforms to you,” notwithstanding, it would seem to me that reorientation - 180 degrees - should be a basic requirement for any iPad application.
Of course I can easily flip the iPad around, but then it renders the case design ergonomically ineffective, and hence, I conform.
While not a big deal (yet), I’m starting to now question some of the premium prices, particularly for applications that do not perform an essential iPad task such as this.

Hi Steve
No you're not quite getting me. The apps (and games) I mentioned will not move at all, so essentially they appear in a fixed location. If you have the iPad turned the "wrong way," you have to physically turn the iPad 180 degrees, as if the iPad were a static device, to view these apps correctly.
The assumption here (I think, anyway), is that the iPad handles the orientation of third-party applications, orientating them when you move the iPad. In principle that's correct, but obviously the third-party developers have to develop the application to behave this way. And, as I've pointed out, a handful are not doing this. Again, I'm not talking about iphone/ipod ports, but actual iPad releases, with a premium price.
The application, "The Elements" which is more like an interactive book, is a prime example of what I'm talking about. I bought it on the day of the iPad release, and with my iPad tucked into the case, set up as an easel comfortably on my lap, the program displayed upside down. If you look at their recent release notes for the latest update, it even says "orientation now fixed." So obviously they were aware of this limitation.
So apparently, there's either not a requirement for an application/game to have to take advantage of the iPad's reorientation abilities, or it's somehow getting past without notice.
Sorry to be so cryptic in my post. I guess it would have been simpler to ask why there are some iPad developed applications that don't move at all when you flip the iPad 180 degrees.
Message was edited by: Greg Paxton
Message was edited by: Greg Paxton

Keyboard not disabling past 180 Degrees (Yoga 13)

The keyboard on my Yoga 13 is (apparently ouf of the blue) not disabling when I open the Yoga passed 180 degrees. It doesn't shut off until the Yoga is nearly fully folded back on itself (tablet mode). This is a big problem for me as I love using the Yoga in stand mode on my lap when sitting in my recliner.
Any way to adjust this?

hi slydog75,
Thanks for Posting,
I personally would suggest
Going into Device Manager and uninstall the Drivers under Sensors
Then Restart the computer the reopen device manager see If the sensors are back then try the Keyboard again
There is a similar discussion about this issue as well Please Check as some Suggest was able to fix this issue.
http://forums.lenovo.com/t5/IdeaPad-IdeaTab-Slate-Tablets/Yoga-13-keyboard-not-turning-off-until-alm...
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Using external LG monitor with 180 degrees rotated display

Hey everyone,
I just got a 19" widescreen LG monitor and I have it mounted upside down, so I rotated the display 180 degrees. However, when I move my mouse over links, the arrow jumps a little and is incredibly aggrivating. Has anyone seen this problem? Does anyone know how to fix it? It happens in Safari too and I already tried re-calibrating my monitor and restarting. Thanks.

Me too, but my LG monitor just stopped working after I installed the recent "Thunderbolt Firmware Update".
Literally the monitor was working yesterday. This morning I installed the update and now it's broken. Great update.
Anyone have a fix?

The labels and text fileld are not hiden by jXDatePicker

Hello
When i click on the drop-down jXDatePicker, labels and thet fields (taht are under jXDatePicker in the form ) show over the calendar- the ables and text filelds are displayed onto the calendar.
Is there some ideas what could be the problem and how can i fix it
10x all

generally indicates using heavyweight components
java.awt.Label instead of javax.swing.JLabel
TextField instead of JTextField
etc

Problem with tx2510us 12.1" laptop. Screen is rotating 180 degrees

Hi,
I got a laptop tx2510us 8 months back. Whenever I try to use the keypad the screen is rotating to 180 degrees and keyboard stops working. I'm rotating the screen switching into notebook mode and using the pen to do the activities.
please help!!

pushing "rotate" button does not rotate scrren contents

Label and textfield flipped (180 degree)

Similar Messages

Maybe you are looking for