Label printing issues in Sapscript

We are struggling with building a new label for a finished good. On previous labels we used barcode BC_CD39. This new label requires a mix of same barcode and 2D barcode. One of the issues is BC_CD39 is it is too big at 13mm. So we want to use CD39__00 which is 5mm. We have gone into SPAD and SE73 and we think we have this set up to work on the two printers involved. We have also followed instructions for 2D in 197177 for adding new small font. We also have a logo for printing. When I print the printout does not have the smaller barcode, any text in smaller font and the logo is missing. I went into the spooler yesterday and these prints are getting an error (unknown print control should be output) that is talked about in note 17559. And when I look at the print preview I have a logo and different size fonts and smaller barcodes showing- basically all the stuff that is missing from the actual print. Has anyone else run into this and how have you resolved this? I am not sure what the spooler does not like. We are using a Printronix T5000e series printer.
The spooler error reads: character converter active when first problem occurred
Data was saved with character set 1100
Data will be converted to character set 9010 (synt = 9010)
and then it gives the OTF error mentioned above.
Our latest attempt is downloading tru fonts and getting them into the printer. Still no success and now the labels are not even printing.
Thanks for any help.
Susan

We continue with not being able to print this label correctly. If I do a screen shot I can see I have varying fonts on the label. But it completely ignores the various fonts on printing.
Our pirnter is a Printronix label printer.
My form is defined as landscape.
I get a spool error when printing that character set 1100 is being converted to character set 9010, which is custom for Printronix.
If we print on legal form vs the label form it prints fine.
We have tried different print drivers but nothng seems to get these fonts out.
We are using 5MM 3by9 barcodes.
This product is about to 'go live' and we really want to print this from SAP vs an external label software program. If we use an external label program separate from SAP it can print perfectly on same label printer.
We welcome any suggestions.
Susan

Similar Messages

Address printing issue in SAPSCRIPT

Hi All,
I am getting address printing issue in address in sapscript .
Here is my address format in the script.
/: ADDRESS DELIVERY PARAGRAPH ZA LINES 10
/:    TITLE                &KNA1-ANRED&
/:    NAME               &KNA1-NAME1&, &KNA1-NAME2&, &KNA1-NAME3&, &KNA1-NAME4&
/:    STREET            &ADRC-STREET&
/:   LOCATION        &ADRC-STR_SUPPL1
/:   POBOX             &KNA1-PFACH& CODE &KNA1-PSTL2&
/:   POSTCODE       &KNA1-PSTLZ&
/: REGION              &KNA1-REGIO&
/: CITY                   &KNA1-ORT01&, KNA1-ORT02&
/: COUNTRY          &KNA1-LAND1&
/: FROMCOUNTRY &T001-LAND1&
/: ENDADDRESS
Here in the above code I had added LOCATION and modified the STREET field value.
Moved the changes to QAS server along with the driver program., confirmed all the related transports are moved.
While testing in QAS , i noticed that after LOCATION print I am getting blank space and then the remaining fields are printed.
For example:
     casa velas boutique hotel
     Attn: Marie John
     AV. cocoterosss
    63550 Nuevo Vallarta, Nayarit,
    MEXICO.
In the above example the third line the LOCATION data.
The surprise here is that I am not getting blank space in DEV , I had checked all the transports, and all are ok.
Please advice me where I am wrong, ie why i am getting blank space in QAS whereas it not showing in DEV.
Thanks in advance.
Vengal Rao.

Hi Jay,
I fully agree with you that the address printed will be as per SAP standards.
Currently I am looking into the country configuration in DEV - I hope may be the reason,
I have to use the existing ADDRESS....ENDADDRESS format as our client is using 4.6 version, he just print the financial reports using the common script.
So anything away from the orginal one may lead to more trouble in other reports.
Once I get a reason behind the issue, I shall definetly post them.
Thanks,
Vengal Rao.

Bar code printing issue in sapscript

hi guys,
there is an issue to capture bar code with special symbol in sapscript.
please advise what can be done here to solve the problem. Thanks.
zebra code in sapscript:
^BY2,3.0^FO36,66^B3N,N,56,N,N^FR^FD>:15[]=/\+|-79{}-02<30#$%^@?^FS
value capture through scanner:
15/+-79-0230
zebra code in sapscript:
BY2,3.0FO36,222B3N,N,56,N,NFRFD>:K7R161884B-FC16(DC>501)FS
value capture through scanner:
K7R161884B-FC16DC501

hi!!!!!!!!!!!
to print barcodes in sapscripts you have to do following steps..
1.choose Character format options
2. Then choose change mode.
3. provide a name say C1 in character format option and then press enter.
4.provide description for that character format say C1.
5.you can find barcode option.place the cursor in that one and press F4 then it will display the list of barcodes available.
6.choose one of them say BC_MSIC.
Now you have created a character format say C1 with the Barcode properties.
Exmaple:
If you want to print the price in barcode format which is in ITAB-Netwr, you have to give the syntax in the script editor like ....
<C1>&ITAB-NETWR&</>
then it will prints barcode in your output....

Automatic Goods Reciept label printing issue

HI All,
we are facing some issues while printing goods receipt label. Please check below steps which we already performed.
1. Basis team has already set up new printer Q534 in SPAD transaction.
2. Then we maintain printer determination parameter with combination of output type/plant 5055 /storage location 0001/usergroup/ device
3. We maintaned condition record through MN14 for th plant 5055.
so when we post goods receipt then it should go for Automatic label printing. In SP01 we are not able to see any request.
Kindly suggesst if any config is missing.
Also suggest in condition record, do we need to maintain anything under the COMMUNICATION tab.
Regards,
Sanjay

Hi Guys,
Today I created one PO in test system and GR posted then I checked Spool request SP01 but due to this GR posted, it showing the spool request only for GR slip but not for label print.
GR slip print showing correctly because in OMJ3 tcode WA condition type maintained for the plant 5055 and Sloc 0001against the printer Q532
Now I maintained label print condition type ZLBL in Tcode OMJ3 for the plant 5055 and Sloc 0001 against the printer Q534 but after GR posting, the lable print spool request did not generate.
In sp01 we can see only GR slip print request for the printer Q532 not for label print
Kindly suggesst how can we determine the printer (spool request generate) for the label print for the printer Q534
Sanjay

Label Printing issues on Crystal Reports Server

I built a label that prints off beautifully on my local machine with Crystal XI installed. However, when I post the label to the reports server, and a user tries to print it off, it prints off two blank labels behind each good label. I have racked my brain on this for days. The printer settings are identical to my local machine. Any idea what might be causing this?

I think the following information might help you
Symptom
A label report was viewed over the web using the Web Component Server, and printed on a label maker printer DYMO 330. The labels were being resized to 8 1/2 x 11 instead of printing the size of the label. Even after selecting the correct size, the labels print one per page, followed by 3 blank labels.
When printing was done through a distributed report or the report designer, the labels printed to the correct size and only printed one label with no blank labels.
What is causing the label report to print incorrectly when printed from the web viewer?
Resolution
Steps to Resolve
1. Open the report in the Crystal Reports 8 designer on the web server.
2. Click on 'File' then click 'Printer Setup'. If a printer is already selected then set it to 'No Printer', click 'OK', then save the report.
3. Click on 'File' then click 'Printer Setup' again. Select the default printer and clear the 'Default Properties' checkbox.
4. Click 'OK' and save the report.
5. Click on Start > Settings > Control Panel > Services and double click 'Seagate Page Server' service. Set this service to run under an 'Administrator' account.
6. Stop and restart the service, and close down all browsers.
The label reports now will print successfully over the web.
Background
Incorrect printing from a web viewer can have several causes, including:
· The report is designed with a designated printer, but the encapsulated page format (EPF) files are being created in 'No Printer' mode.
· The server does not have access to the printer.
· A valid printer is not saved with the report on the server.
· The printer driver is not installed on the server.
Regards,
Raghavendra.G

Label printing issue with chinese characters (SAP script)

Hi ,
I have a requirement to print chinese characters on label print out.
Here are the steps already tried:
1) Created a new device type which is copy if ASCIIPRI and character set 8400
2) Font ANDALE_S, CNHEI, CNSONG are assigned to device type, same fonts called in SAP script.
3) During the print, it is picking ANDALE_S font(observed in spool RAW data), but preview is good.
4) I put ZPL codes CW1,B:MSUNG.FNTFS in beginning of script and also ^A@N,50,50,B:MSUNG.FNT while prining actual chinese text in SAP script.
5) also tried other device types assigned to printer LZEBU2, LB_ZEB2 etc.,
6) already checked at printer DIMM level, SIMSUN, ANDALE_S fonts are already installed
7) Character set on printer is same as in SAP
So far no option worked, it default to Courier fonts while printing and it results garbage characters.
If anyone has ideas, please advice.
thank you,
Anil

Hi,,
If the ZPL commands are correct for switching to the printer's internal CHinese font and character set, it may work to add the fonts via SE73 -> Printer Fonts -> ASCIIPRI . In here you need to add the commands in the print control SFxxx for your created font.
Another possibility is to print via windows and device type CNSAPWIN. Here it should not be necessary to add any font.
Regards,
Aidan

GR Label Printer Issue

Hi,
I have a zebra printer (ABC_LBL) which is used for GR Label printing.
I have maintained the same printer name in Output type and I am able to generate the output also.But there is lot of over-lapping happening here, I think it is because of some printer settings.Can anyone let me know do we need to maintain any specific printer settings.
Thanks and Regards
Ankit
Edited by: Ankit Patodi on Apr 14, 2009 10:24 AM

Hi,
Just take take output in any laser print or other printer for the same output,some time if the settings modified means it iwll print like that
Regards
Murugan

HP LaserJet Pro CP1525nw Color Printer - label print issues

I'm getting great plain paper printing, however, my labels are coming out with sporadic patches of white where there should be color, especially along the edges. Also, the black text is printing light "shadow" text in areas that should be white/unprinted. Can anyone help?
Ann

Hey,
I see you are having an issue with Air Print on your CP1525nw Color Laserjet Pro. Have you tried a full network power cycle?
Unplug the router and printer while on
Power down the iOS device completely. Check out the following link for how: http://ipod.about.com/od/iphonehowtos/qt/turn_off_iphone.htm
Wait 30 seconds
Power the router up and wait for it to completely initialize before proceeding
Power the printer up and wait for it to completely initialize before proceeding
Power the iOS device back up
It sounds like the network most likely lost communication with the bonjour service of the printer.
If you need to update the firmware of the CP1525nw please click the following link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-86473-9&cc=us&dlc=en&lc=en&...
Let me know how it goes.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

EHS- WWI Label printing issues with Word 2007

I was wondering if anybody was experiencing issues when printing WWI labels from transaction CG54
when user has Microsoft Word 2007 ? Our users our seeing delays/pausing between labels when they have
Word 2007. We do not see this pause on the users machines that have Word 2003. I did not see any OSS Notes,
does anybody have a solution/work around for this ? Our desktop GUI is at Support Pack 21 and our
server is at Support pack 22. Any ideas ?

Hello Carla
no . This problem hasn't been detected yet using our configuration. May be these Notes might help:
Note 907221
Note 1012558
Note 1431414
Note 568302 and Note 1487551. Recent WWI version is WWI SP 23.
With best regards
C.B.
Edited by: Christoph Bergemann on Sep 4, 2010 8:13 PM

MRP Label Printing Issue

Hi Experts,
I am facing an issue while printing MRP Label ,which i am printing using Smartform,
the font size which i define in Smartstyles is not at all reflected while print preview , in ECC 604 system.
the printer which we are using to print is EPSON LQ2090 Dot Matrix Printer.
please help me solving this issue <removed by moderator>
Regards,
Uday Kiran K....
Edited by: Thomas Zloch on Apr 26, 2011 9:18 PM - priority normalized

Hi Uday,
In the smartstyle, there is a folder for character format. Pointing there click in creater new. Now give a charater format name. and in the following screen in FONT tab give the Font Family Name, Font Size and Font Style if any.
Then in the text field in smartfrom give the variable inside <CHARACTER_FORMAT_NAME> &VARIABLE& </CHARACTER_FORMAT_NAME>
Thanks & Regards,
Harish

Label printing issues

My labels start out ok, then by the bottom of the page the addresses are half off the label. Any suggestions?

Hi,
Please do not post same question again and again. What is your printer ? What is the software you are using ? What is the type of label sheet ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Goods Reciept Label Printing issue

Hello Folks!!
We have created a customized smartform ZDU_GR_LABEL for printing it against the production order with transcation MB31 during goods reciept. Customization settings are done in NACE for application type ME- Inventory management and also condition records is maintained.Printer configuration is also maintained for zebra printer.
Details maintained in NCE
Program : SAPM07DR
Form Routine : ENTRY_ETIE
FORM: MM07ET
The label is not getting printed and also the spool shows blank page.Please suggest the solution

hii,
Program : SAPM07DR
Form Routine : ENTRY_ETIE
PDF\smartforms: ZDU_GR_LABEL
(Not in form it is for SAp scripts)
Also create a customised Z driver program.
regards,
Sri

Zebra Label Printing - DPI issue.

Hi Guru's,
I have a script for Zebra label printing. its an old script working fine. Now the issue is:
The above script is printing labels for 200 dpi printers as per the requirement.
Now one of the Markets have purchased 300 dpi printer. When the print the same label using the new printer using the script, they are getting the Label compressed.(i.e.. the Script is now much smaller and aligned to the left top corner, no data is missing but the Lettering is compressed and not occupying the total space alloted on the label).
I have chcked the manual for Zebra label printers, but could not solve my issue. Can any one of u help me. Thank you.
Here is extract of script used for initialisg the label:
/:   NEW-PAGE
/    ^XA
/    ^PW1200
/    DFI128FS
/    ^PRC
/    LH0,0FS
/    ^LL1500
/    ^LT12
/    ^MD0
/    ^MNY
/    CW1,B:CGTRI_NCW2,B:CGTRI_ICW3,B:CGTRI_BCW4,B:CGTRI_J^CW5
=    ,B:CGTRCO_NCW6,B:CGTRCO_ICW7,B:CGTRCO_J
/    LH0,0FS
Can anyone of you check this code & tell me where exactly the 'DPI' issue is handled in the script. Also any additions to the above script to acheive the solution....
regards,
Chaitanya L

Hi Balakrishnachaitanya,
i've made just a couple of sapscript whit the ZPL language, and i dont't think that you can set the DPI of print,
maybe you have to set the printer' settings.
Regards,
Davide

Issues with Crystal 2008 Printing to a Zebra Label Printer with SP2

Hi there
We are having issues printing to a Zebra Label Printer using Crystal 2008 SP2.
When you attached a .rpt file to the .NET Application which is accessed via RDP/ICA the reports in Crystal XI worked fine.
Steps we have taken are:
Printing direct from Crystal 2008 Designer to the Zebra Printer works using a Generic Text Driver
Printing direct from Crystal 2008 Designer to the Zebra Printer using a Zebra Universal Print Driver DOES NOT work (we were advised the Universal Print Driver may assist with the issue)
The report when accessed via the .NET Application via RDP/ICA using the Universal Print Driver it doesn't work.
The report when accessed via the .NET Application via RDP/ICA using the Generic Print Driver it doesn't work.
The report when accessed via the .NET Application drectly from Server Console prints fine using Generic Print Driver, but not with RDP/ICA.
Can anyone offer any suggestions to a fix?
Many thanks.

Hello,
I'll look at this tomorrow when I get into the office. An I am moving this to the developer forum.
Thank you
Don

Labell printer printing Issue

Hi ,
I am facing issue on the printing with labell printer. The Labell printer is configured as remote printer >When we give print in windows queue it print fine in Windows. And When we create print queue in HP Unix , the printer is not working (no print from the printer).Please suggest me what need to be done that labell printer can print in HP Unix in romote mode (remote printer).
The labell printer is ZEBRA printer.
Please help me out for resolving this issue ASAP .
Thanks and Regards
Brijesh Prasad

Hi
If you want to print from unix server using SAP, then the methods are
you need to maintain the system IP from where you are giving the print and the printer host name
for ex:-
10.12.90.0 <printername>
from spad check whether you have configure using os level.
Regards
Mohammed Nizam

Label printing issues in Sapscript

Similar Messages

Maybe you are looking for