Labell printer printing Issue

Hi ,
I am facing issue on the printing with labell printer. The Labell printer is configured as remote printer >When we give print in windows queue it print fine in Windows. And When we create print queue in HP Unix , the printer is not working (no print from the printer).Please suggest me what need to be done that labell printer can print in HP Unix in romote mode (remote printer).
The labell printer is ZEBRA printer.
Please help me out for resolving this issue ASAP .
Thanks and Regards
Brijesh Prasad

Hi
If you want to print from unix server using SAP, then the methods are
you need to maintain the system IP from where you are giving the print and the printer host name
for ex:-
10.12.90.0 <printername>
from spad check whether you have configure using os level.
Regards
Mohammed Nizam

Similar Messages

Labels not printing correctly

I am printing with an HP OfficeJet 6500 on an iMac 27" Quad.
These are product labels that will eventually get placed on glass jam jars.
I purchased Labels # WRV5-3R_5923 from labelsbythesheet.com.
They provided me with a Microsoft Word template.
The actual printing is really beautiful. The labels respond with great clarity on my inkjet printer, and I am now testing them in the refrigerator. (I am making labels for jars of jam)
The problem is getting things aligned. The bottom row boxes show up perfectly in the preview. But when I go to print, the last 1/4" of the bottom boxes are clipped off, so the bottom labels don't print correctly.
Then the labels seem to "move around" across the page. The first label is correct, but as one goes across the page, the border moves from left to right. The left border is about 1/4" past the label. The fifth cell on the right is about 1/8" inch before the label.
Also vertically, the top row prints 1/8" below the label. The bottom row prints 1/4" above the label.
On my printer, I have disabled all the "align and center" controls, the "fit to page" control, the "scaling" and "bounding box". So in the controls it appears the printer software is doing nothing to the original document.

Hi garrymtp,
I would like to help you with printing labels. The issue you have described sounds like it a result of print margins.
The document margins must match (or exceed) these margin settings in the portrait orientation.
Media
1. Left (LM)
2. Right (RM)
3. Top (TM)
4. Bottom (BM)*
U.S. Letter
U.S. Legal
A4 210 x 297 mm (8.3 x 11.7 inches)
U.S. Statement
210 x 297 mm (8.5 x 13.0 inches
Customized media
Photo media
B5 (JIS): 182 x 257 mm (7.17 x 10.12 inches)
A5: 148 x 210 mm; (5.8 x 8.3 inches)
Cards
3.0 mm (0.125 inch)
3.0 mm (0.125 inch)
3.0 mm (0.125 inch)
3.0 mm (0.125 inch)
279 x 356 mm (11 x 14 inches)
310 x 310 mm (12 x 12 inches)
B4 (JIS): 257 x 364 mm (10.2 x 14.3 inches)
Super B: 330 x 483 mm (13.0 x 19.0 inches)
A3: 297 x 420 mm (11.7 x 16.5 inches)
A3+: 330 x 483 mm (13.0 x 19.0 inches)
5.0 mm (0.197 inch)
5.0 mm (0.197 inch)
20.0 mm (0.788 inch)
20.0 mm (0.788 inch)
Envelopes
3.0 mm (0.125 inch)
3.0 mm (0.125 inch)
3.0 mm (0.125 inch)
14.3 mm (0.563 inch)
Are you able to modify the margins?
How to Change the Margins in a Microsoft Word Document for Mac
Keep me posted
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

CR2008 SP5 Labels not printing correctly

Hi,
I've got an issue were labels are not printing correctly to a Zebra printer. I'm using Crystal Reports 2008 SP5. The problem is the width is 10cm and the length is 7.5cm but Crystal is automatically changing this to landscape orientation which doesn't print correctly then. From reading older threads, a lot of people have had similar issue but according to this thread - CR 2008 V 12.3.0.601 Labels will not print correctly the issue should be resolved in SP5 but it's still not printing out in the correct orientation despite the print preview looking perfect.
I've tried checking the No Printer option and the Dissociate Formatting Page Size and Printer Paper Size option and pretty much every other option I've seen mentioned but I still cannot get the label to print in the correct orientation. Has anyone succesfully got this working?
Thanks

Hi Gary
What is the version reported when in the designer you go to the Help menu and then About... ?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Print quality issues

Hello
We are having print quality issue when printing PDF's to our Canon iR C2880/C3380 UFR II. This was the most recent print driver from canons website which was download about 6 weeks ago. version 2.9. At one time we were having other pring quality issues and we changed from the post script driver to the ufr ii which solved the problem at the time.
This past saturday we upgrade the operating systems on the systems in question and they are now running windows 7 64 bit with service pack 1 installed. image 1 is the orignal pdf that was printed with a 3rd party pdf printer(PDF Xchange view version 2.5) image 2 is the same document that was printed using acrobat reader 10.1.2
the options for the print were pretty much identical between the program. Print as image was not selected. 1 thing to note with the acrobat when print as image was selected there was a slight improvement in the print quality.
Any help would greatly be appreciated.
image 1
image2

Hi, nd a warm welcome to the forums!
Off the bat, it looks like maybe bad RAM/ROM in the Printer, or corrupt Font.
Can you have another Computer jook to it and print for a test?
Can you try Printing from Adobe Reader...
http://www.adobe.com/products/acrobat/readstep2.html
Can you in Preview, Save As a picture format for a test?

My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?

My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?

Soution: Delete the printer and add the same printer back in, therefore creating a new print queue.

Hp Color Laser Jet 5550dn Print Quality Issues

Good Afternoon,
I have a Hp Color Laser Jet 5550dn that has some print quality issue. I've attached a black and white scan, but the color is a light blue to blue that form the blotches. On the back of the page there are blue and pink streaks.
I can print more sample pages or print them in color, but anyone have any idea what could be going on here?

We are encountering a similar problem. The streaking is coming fromt the Cyan cartridge and has continued for over a year now, despite numerous cartridge changes and replacing the transfrer case. It is progressively getting worse and I have yet to find a solution to this problem online. Any help or guidance would be appreciated.

HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit

Hello,
For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
The problem:
Printing: Currently receiving an "Error - Offline" message in my printer queue at all times.
Scanning: Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
Things I have tried:
Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
Uninstalled Drivers from CD-ROM, re-installed, countless times
Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
Installed Drivers and finding the printer myself through it's own static IP address.
Turned off firewall and attempted to print (after reboot), same errors
Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
Things I have not tried:
Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
You tell me
Curiosities:
I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
Weird that it is not recognizing the model number.
Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
Theories:
I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that.
Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.

Hi Zerosouls,
I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
Restart the computer after this step and try installing Hp Officejet 6600 again.
Please let me know what happens
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Plug in Manager released today doesn't fix print settings issue

The download page says it improves reliability in Aperture and other apps. But it didn't fix the print settings issue in Aperture. I sent feedback on the problem. Try to hit the print settings button after hitting command P. If you have Aperture 2 and the latest security update the settings won't come up. Look at the top of the list for the Plug In Manager update.
http://www.apple.com/support/downloads/

Hopefully an update fixes this. I have had this problem for a long time, tried many different fixes, no luck. Horizontal scrolling works in IE9 however.

Windows 8.1: Printer Offline Issue

Windows 8.1: Printer Offline Issue
If you have seen issues where your laptops/tablets has been taken from a private (home) network to a public network and then not been able to print when returning back to your private (home) network. This is most likely due to the public network settings not being reset back to the private (home) network settings. If this sounds like an issue you are having- try resetting your network settings by following the steps in the documents linked here:
For Ink Printers, please visit this document to help resolve your issue:
Print Jobs are Stuck in Queue
For LaserJets, please visit this document to help resolve your issue:
HP Laserjet - Printer offline and unable to print on a network in Windows 8.1
Install this Microsoft patch to make sure this private-public-private network issue does not reoccur. It is part of the April 2014 Windows Update package for Windows 8.1 and Server2012 R2 (http://support.microsoft.com/kb/2919355).
If you experience this issue before you apply the patch, you must manually reset your network settings for this patch to function. Please refer to the above documents for manual reset help.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Hello All,
The printer goes offline due to proper driver is not installed correctly or if the printer port is not selected correctly.
I would suggest that you check the printer port (if the printer is connected via USB then chck if you have selected USB001,002... OR DOT), if the printer is connected via Network then check if the printer is selected via TCP/IP and then check the results.
Alternatively, you may uninstall and reinstall the driver and then check the results.
Regards,
HP Laserjet team

PRINT OUT ISSUE

on the right hand side of the Print out there are black lines appearing in the print out . I got the toner cartridge refilled also. what can i do to remove those lines on the right handside ?
I would request the HP experts to please advise solution to this problem on my e-mail id : [edited by Moderator] as well as here.

Hi @SATISH1952 ,
I see that you are getting black lines on the pages. I can help you.
HP recommends that you use Genuine HP toners. HP can't guarantee the quality or reliability of non-HP toners, or refilled HP toners. The following solutions might not resolve your print quality issue.
I have provided a document to go through the steps to see if it will help.
Troubleshooting Print Quality Issues.
Inspect the toner cartridge for damage:
1. Remove the toner cartridge from the product and verify that the sealing tape has been removed.
2. Check the memory chip for damage.
3. Examine the surface of the imaging drum on the bottom of the toner cartridge.
CAUTION: Do not touch the roller (imaging drum) on the bottom of the cartridge.
Fingerprints on the imaging drum can cause print-quality problems.
4. If you see any scratches, fingerprints, black toner or other damage on the imaging drum, replace the toner.
5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem has resolved.
If the problem persists, try Genuine HP Toners.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Label report printing blank labels

I have created a 1 1/7 x 3 1/2 inch label in Crystal Reports XI that is printed on a Brother QL-500 label printer. When I test the label from the CRXI application, it prints fine. But, when I print from Internet Explorer it prints out the correct label, followed by 3 blank ones. I checked to be sure that no fields are outside the printable range and have resized and hidden the sections not being used. Any idea what could be causing this?

The label is being printed from a web-based software called WinLIMS. It uses a SQL database to look up the data and fills it into the label and prints it. All of the fields are within the printable area (as far as I can tell anyway). Here is a link to a screenshot of the label:
[http://postimage.org/image/198aoxyn8/|http://postimage.org/image/198aoxyn8/]

RH10 - Printed Documentation Issues.

Hi!
I'm new to RH10. I've started a new Technical Authoring role having taken 6 years out of the role... In my previous roles I've walked into the company and the styles and templeate were already set up and I just got on with the authoring part of the role. However, this time I'm starting from scratch, so am requiring some help.
I've used Robohelp in the past and decided this was the software to go along with. However, it's quite a bit different to how I remember it!
Currently I am using a trial of Robohelp 10. I have created a test project and managed to generate a Microsoft HTML Help file. I'm now trying to generate this into a printed document. Issues I'm having are:
Firstly I seem to have a line of text which is set as Conditional Build Tag of Online only showing in my printed document. There are other Onliine only bits that are not showing, but this particular line I just cannot seem to remove from the printed document. Any suggestions on how to deal with this? I have removed the conditional tag and re added it.
The company's brand is to use Tahoma font. However, I'm finding that when I print the document it comes out in grey, even though I've set the font colour to be automatic. I've even tried to swap this to being black, but I still seem to get grey print. Is this down to the font type I'm using or could there be an issue with the generation?
I've set my Heading 1 style to be centred for the title page and still it prints out left alligned. Am I missing something with the style?
Finally, each of my topics are coming out printed on a new page, even though I have not selected the 'Start each topic on new page' check box when setting up the generation options. Can you point me in the right direction to adjust this please.
I'm sure that mose of these are user error and probably down to my rusty authoring. But hoping that help on these will help me to move forward and loosen up the rustyness!!!
I look forward to hearing from you soon.

Online Conditional Build Tag: You may want to check what Conditional Build Tag expression is being used in the Printed Documentation single source layout? This controls the content that is included. However be aware that content in a topic (or a topic itself) can have more than one tag assigned to it. I think this will be a case of going back to the topics that have the online tag and doing some investigation. You can easily identify the topics with a CBT by right clicking on a tag in the Conditional Build Tag pod and selecting Properties.
This could be down to the Word styles you are using in the template and how they are mapped to the RH Styles. Check out the following link for an excellent tutorial on producing printed documentation. http://www.grainge.org/pages/authoring/printing/printing.htm
See point 2.
Again this is style related. It sounds like you have a Word style mapped with the pagination option selected. See point 2.

Regarding Smart Form Printing, Print Preview issues

Hi,
I have couple of issues regarding Smart Form Printing, Print Preview.
In my program i am passing below parameters to smart form function module:
t_control-device = c_printer.
t_control-no_dialog = space.
t_control-preview = space.
t_control-no_dialog = c_x.
t_output-tddest = g_spld.
t_output-tdimmed = c_x. " Print Immediately
t_output-tddelete = space. " Don't Release spool after output
g_user_settings = c_x.
Issue#1: Though i have set preview paramter to space, after executing program it is prompting for Preview Screen, There again i have to give printer name though i am passing printer name as above and i need to hit on print preview button to set Layout output.
Here how can i go directly to layout output without preview screen.
Issue#2: In some cases we need to Print the layout set output after executing program immediately without prompting for preview screen and then Layout set output should also be shown after printing the output.
How can i solve these issues!
Thanks in advance.
Thanks,
Deep.

Hi,
In the SAP menu screen goto <b>System->User Profile->Own data</b>
There in the defaults tab, for the output device give the value you had maintained for <b>g_spld.</b> This will not prompt you a dialog screen, and if you want to print immediately select the checkbox as well. Then try to execute the smartform. Hope this solves ur issue.
Tushar

Printer color issues

I have a HP Deskjet 3050A J611 that the color is way off when it prints. During the original set up I saw that the color was off and when you put it the sample sheet on the scanner to scan in it wouldn't recognize. So I don't know how to fix the print color to be what I see on the computer.

Hi Hoosiergirl,
Is the Model # for your printer J611g?
I am linking a troubleshooting document for Print Quality Issues for a Deskjet 3050A - J611g. Click Here I recommend that you take a look at these steps for guidance on solving the problem you are having. It is a good idea to run the cartridge cleaning utility (Solution 6, Step 4) up to 3 times. Cleaning the cartridge contacts as described in the link can also be helpful. Let me know how it goes.
Good Luck !
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

Printing CM Issue

I was pleased to find that I can now print from LR 1.1 directly to QTR using CM and QTR Create-icc RGB profiles without crashing (always crashed in 1.0). However, there is still a problem with CM in LR 1.1 when using these profiles. Prints are flat and muddy with low contrast (using either perceptual or relative intent). Same file and profile produces perfect prints when printed from CS3 with perceptual intent and BPC on. I can also get a good print by first converting the image file to the QTR Create-icc profile in CS3 and then printing from LR 1.1 with CM turned off (eg. "printer managed"). It seems to me that LR is not using the icc profile correctly when rendering for printing. Is there a CM fix in the works for the next release?

Hi there @comicsans , welcome to the forums!
I am responding to your post about the printing issue you seem to be having, as your print outs seem to offset by 5cm when printing in landscape, and all print settings and the print preview are and appear to be correct.
I am going to let you know what my personal suggestions are and some steps you could try that might help you.
To start with, you can use this troubleshooting guide that will bring you through steps to help with print quality issues. I am thinking that the printer may need an alignment. The test print you'll print out will show you the results if the printer itself has an issue.
Fixing Print Quality Problems for the HP Photosmart Premium All-in-One Printer Series (C309)
If the test print from the above guide shows no issues, the problem could be within the program you're printing from or a driver conflict.
You can try Uninstalling the Printer Software , restarting your computer, and then reinstalling the printer driver and software. To get the driver you need, click this link, select your operating system, driver and download: HP Photosmart Premium All-in-One Printer - C309g Drivers
It's also a good idea to try printing from another program, which will rule out if one program is solely the problem.
Feel free to let me know your findings and results!
I hope my post was informational, enjoy your Thursday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Any fix for the PC based network printer communication issue with Mavericks?

Any fix for the PC based network printer communication issue with Mavericks?

I just signed up for FIOS and am not experiencing your problem (had enough other ones instead).
Go to mail preferences ~ click on a mail account ~ click on the advanced tab. The only settings that worked for me were: port 110 SSL OFF, authentication: Authenticated POP (APOP). If I remember correctly when I first set this up another window opened and I typed in my password and never had to do that again.
Hope this helps.

Labell printer printing Issue

Similar Messages

Maybe you are looking for