LabelStudio 7.09.02 Font issue driving me crazy

I don't know what to do.  My tray/pallet tags are not formatting the barcodes correctly.  This note at the end of the release notes is not helping me, "If you are using the PCL driver, note that PCL fonts included with Label Studio have been updated. If you generated any PCL fonts based on the Label Studio PCL fonts, regenerate them again after installing 7.90c.02.00." 
From what I can tell regarding my font installations, they were purchased from ID Automation.  I don't know what I need to replace what I have.  I don't know where to start looking.  Your assistance would be appreciated.
dvn

Hopefully I can clear up some of the confusion on how the fonts and barcodes in Label Studio work.
In general, the barcodes within Label Studio are just fonts but instead of requiring the user to select the font and then tweak the various font properties to get the output correct we encapsulate it within a barcode object that can be dropped on the label.  That way we can also ensure that the barcode is printing out at the proper dimensions to obtain a valid barcode.
Each barcode is set to point to a specific font and that is something that is set within the code and a user is unable to change.  With the 7.90c.01.00 release the program was set to use the barcode fonts that begin with "IDAutomation".  Because of issues with those fonts 7.90c.02.00 changed to use the fonts that begin with "SAP" so 7.90c.02.00 will not reference any of the u201CIDAutomationu201D fonts.
When using a Windows printer driver the program uses the fonts installed within the Windows/Fonts folder.  If using PCL it doesnu2019t use those fonts and instead uses the special PCL fonts which are a binary representation of a specific font and font attributes (size, bold/italic/underline, DPI).  The PCL name can be decoded to tell you what each specific file contains.  For example you mention u201CSAPI25L-170-1-300-PCL.fntu201D.  The first part tells the font name which is u201CSAP125Lu201D.  The second part of the name is the font size with 170 equating to a 17 point font.  The third position is whether the font is bold/italic/underlined with a value of 1 being regular (all barcodes will be a 1).  The fourth position tells the DPI which in this case is 300 DPI (the only other option is 600 DPI).  The last part is the type of data stream which for now will always be PCL.  The PCL fonts are generated from the Windows fonts (from within Label Studio by selecting the menu option u201CTools > Create Data Stream Fontsu2026u201D but by default we install all PCL fonts needed to use the default PCL designs that we ship.
From your posting I didnu2019t get where the u201CSAPu201D fonts are showing up.  Are they showing up under the Windows/Fonts directory?  Are they showing up within the Label Studio PCL font directory?  Do they show up within the font drop down within Label Toolbox?
Is this a problem when previewing, printing, or both?

Similar Messages

  • Curve issues driving me crazy!!

    Ok, so I bought my BB Curve in January, and at first I loved it!
    A few days ago though it began going crazy.  Everytime I try to open something I get that annoying clock thing, and then once I finally get the program open, it stays.  This happens during phone calls (so it is rediculous trying to answer and end calls)  writing texts and email - anything.
    Then I added in the battery issue - my phone will die within 6 hours, even if I am not doing anything different.
    And now...the last few nights the screen has gone white with a weird meesage on it (something like APP ERROR I think...)
    I got a new SIM card, and that fixed it for about 6 hours. 
    This is driving me crazy!  i take my battery out so many times during the day it is almost not worth having a phone!
    Please please please help!

    I have the Curve 8130 - my carrier is ATT & for about the last mth it has been sluggish. The hourglass keeps popping up like something is running in the background. I have not loaded any new apps recently & it does starighten out after I pop the battery, but that's getting old pretty quick. Fortunately, I'm not having battery issues - but it is a nuisance to keep fighting with that **bleep** hourglass. Anybody else out there having the same issues or are we just the lucky ones???
    Looks like 2 different carriers here, so I don't think it's an ATT thing. Is Blackberry doing something or upgrading something that maybe we're not aware of? I never had an issue with my Curve before - but this last month has been really aggravating. I'm sure we can't be the only 2 people having these issues. Help!!!

  • Gradient issue driving me crazy

    Hi Everyone,
    I am having a huge issue with Photoshop CS5.5. The gradients and colors are acting crazy. When I bring in a image with a gradient it gets black spots all in the dark areas. Even when I use the default gradient selection this is what happens. When I bring in a picture that should have a white background it turns to black. Now apparently, when I save it out as a JPEG saves correctly without the black line or messed up gradients. So it seems to only be an issue when I am working in Photoshop, the gradients appear messed up. Any idea of what is wrong with my display?
    Any help would be appreciated,
    Thanks
    Better example of a before and after pic:

    Looks like a known problem with some AMD/ATI video drivers where pixels with red==0 are displayed as black in Photoshop. If so, a solution is to use Catalyst 13.2 beta 7 or Catalyst 12.8.
    http://support.amd.com/us/kbarticles/Pages/AMDCatalyst132BetaDriver.aspx

  • Possible internet routing issues driving me crazy!

    I've somehow hit a problem accessing a particular favourite website and it seems I may have a routing issue.
    I've spoken with a friend who is fairly network savvy and he's suggested I raise a case \ complaint with BT. I thought I'd use this forum to test if I'm missing something I could be doing to fix it before logging a problem with BT Helpdesk!
    I've a BT Homehub 2 (Current firmware    4.7.5.1.83.3.5 (Type B) and I can access pretty much all websites I care to look at without any issue at all, however the site I read most days is now no longer viewable on any of my 2 PC's nor my iPhone. When I try to access it I  get no error messages at all just a blank white page.
    Doesn't matter if I try using IE or Firefox or Chrome browers it's the same result - I just see a blank white page.
    The site in question www.celticquicknews.co.uk (or www.celticquicknews.com) and is definitely available, as I can access it when using a site such as http://www.free-internet-organization.tk/ on both my PC's and iphone so I know the web site is up and running and available for browsing but since Thursday lunchtime I've had no joy in being to access that particular site directly wihout resorting to using another middleman site to let me view it.
    I have tweeted the guy who hosts the www.celticquicknews.co.uk site and he's said his site is fine but has numerous similar queries around BTINTERNET folks having the same issue as I'm reporting.
    I run McAfee Internet Security and having disabled the various firewall \secure browsing functions no improvement still no joy.
    I did successfully somehow connect directy to the illusive web site this morning (Sunday 1st May) on my iphone at around 10am, but by the time I boiled the kettle to have a coffeee and sit and read the site it became inaccessable again on my iphone and both my PC's! So what's going on?
    www.celticquicknews.co.uk [217.174.253.143]
    www.celticquicknews.com [217.174.253.143]
    Homehub TCP\IP info is as below which I suspect is of value to the more techincal on the forum:
    Broadband network IP address    109.152.154.29
    Default gateway    217.32.142.102
    Primary DNS    194.72.0.114
    Secondary DNS    62.6.40.162
    ADSL line status
    Connection Information
    Line state    Connected
    Connection time    0 days, 01:11:16
    Downstream    15,978 Kbps
    Upstream    1,144 Kbps
    ADSL Settings
    VPI/VCI    0/38
    Type    PPPoA
    Modulation    G.992.5 Annex A
    Latency type    Interleaved
    Noise margin (Down/Up)    5.2 dB / 6.0 dB
    Line attenuation (Down/Up)    31.0 dB / 13.8 dB
    Output power (Down/Up)    23.6 dBm / 1.7 dBm
    C:\>tracert -d 217.174.253.143
    Tracing route to 217.174.253.143 over a maximum of 30 hops
      1    <1 ms    <1 ms    <1 ms  192.168.1.254
      2    15 ms    15 ms    15 ms  217.32.142.102
      3    18 ms    17 ms    16 ms  217.32.142.142
      4    22 ms    22 ms    21 ms  213.120.163.26
      5    22 ms    20 ms    21 ms  217.32.27.30
      6    21 ms    21 ms    21 ms  217.32.27.178
      7    22 ms    21 ms    21 ms  109.159.250.78
      8    33 ms    35 ms    35 ms  109.159.250.13
      9    28 ms    28 ms    29 ms  62.172.102.1
     10    29 ms    28 ms    28 ms  195.66.224.98
     11    33 ms    34 ms    33 ms  88.208.255.61
     12    38 ms    32 ms    33 ms  88.208.255.102
     13     *        *        *     Request timed out.
     14     *        *        *     Request timed out.
     15     *        *        *     Request timed out.
     16     *        *        *     Request timed out.
     17     *        *        *     Request timed out.
     18     *        *        *     Request timed out.
     19     *        *        *     Request timed out.
     20     *        *        *     Request timed out.
     21     *        *        *     Request timed out.
     22     *        *        *     Request timed out.
     23     *        *        *     Request timed out.
     24     *        *        *     Request timed out.
     25     *        *        *     Request timed out.
     26     *        *        *     Request timed out.
     27     *        *        *     Request timed out.
     28     *        *        *     Request timed out.
     29     *        *        *     Request timed out.
     30     *        *        *     Request timed out.
    Trace complete.
    C:\>
    I've reset my HH several times over the weekend and am baffled as to how I can somehow have 1 site excluded from my browsing options for no obvious reason other than a suspected internet routing issue.
    My iPhone is on ORANGE and when disabling the wireless connection it too is unable to view the site in question so it's a real pain!
    Not sure where to go to progress this so any help \ guidance is very much appreciated.......
    Solved!
    Go to Solution.

    Appreciate the help....been out for most of the day and checked in to see if any additional posts.
    I tried pinging the site and it does seem to resolve OK and also tried accessing site via IP but same issue - blank white page.
    >ping www.celticquicknews.co.uk
    Pinging www.celticquicknews.co.uk [217.174.253.143] with 32 bytes of data:
    Request timed out.
    Request timed out.
    Request timed out.
    Request timed out.
    Then tried the telnet command "telnet 217.174.253.143 80" and I do not get any errors and as suggested the command prompt goes blank but no matter what I type I get no errors or response from server 217.174.253.143.
    My IP address has changed from this morning and sadly still same issue for me.
    Internet connection configuration
    Connection Information
    Connection time
    0 days, 10:05:37
    Data Transmitted/Received (MB)
    10.8 / 29.4
    Broadband username
    [email protected]
    Password
    Not configured
    TCP/IP settings
    Broadband network IP address
    86.147.168.198
    Default gateway
    217.32.142.102
    Primary DNS
    194.72.0.114
    Secondary DNS
    62.6.40.162
    The tracert comments make sense so that's helped me understand, thanks for checking that out.
    So what's the best option for me? Am I wasting BT and my own time logging a case?
    I'd not usually bother pursuing this for the sake of a single web site but I'm bemused how this has happened since last week?
    Thanks again for all help and guidance.
    PJ

  • Apple TV Syncing Issues Driving Me Crazy!

    Hi All :o)
    I've had my ATV from launch and it has hardly had any problems at all but since the latest software update and the latest Time Capsule update i have had nothing but trouble at least two to three times a week my ATV forgets all and has to re-sync everything its now to the stage where i cant be bothered to use it?
    My question is has anyone with this set up found this issue? and does anyone know if apple is AWARE of this issue?
    Any one with any ideas would be a great help cheers all :o)

    Hello, I have had both the ATV and Time Capsule running and done all the updates whenever they came out and have never had that happen, except when I accidentally unchecked 'all' in iTunes and it had to re-synch, but that was me clicking things I wasn't aware of. So sorry, can't help, it works for me.

  • Help--printing issue driving me crazy

    Hi, I am hoping someone can help me.  I have images that I created in Photoshop at 300dpi, that seem to "all of a sudden" be printing on my HP laser priner in "dots", almost looks like what a dot matrix printer used to print.  Yet when I print something from the internet it comes out fine.   Why would something from Photoshop print this bad and from the web it prints ok?     Thanks much for your help!

    Try re booting the handset by removing the battery.
    Also look in the menu to see if he has changed the settings.
    If all else fails action a factory reset backing up naything you want to keep.
    Nokia Lumia 520
     iphone 6 Plus.
    Be happy !!

  • SlideToggle issue driving me crazy!!

    Hi,
    I'm having real trouble with slideToggle on my button called videos in my edge project. from what i can see the code is exactly the same as the other buttons but will not reveal!
    Any ideas???
    project attached here:
    Dropbox - PUBLISH.zip
    thanks!

    Seems to be a problem with ,err letter capitalization
    In the videosbutton click listener,last function call is
    sym.getsymbol("Contentcontent").$("videos").slideToggle();
    If should be
    sym.getSymbol("Contentcontent").$("videos").slideToggle();
    's' is for getSymbol is small in your composition make it caps

  • Photoshop CC 2014 font issues

    I'm Not entirely sure why this is happening, or what's causing it, but photoshop cc 2014 is causing some serious issues with fonts on my documents. Up until this point my company has used Extensis Suitcase Fusion to activate fonts used throughout our project docs. The 2014 typekit update and addition is somehow conflicting with either photoshop or suitcase and in return setting a large portion of my fonts to it's default or regular weight. It seems like while suitcase is auto activating the necessary fonts, typekit is reading each of those weights as their own individual fonts. This might seem difficult to understand but in any case i would just like to know if there is a way to completely deactivate typekit and or remove it's involvement in my project documents, at this point it is resetting dozens of fonts on some very important project files. I'd much rather not be limited to just the fonts that adobe or typekit prefers.

    I still don’t have a clue…
    So far we’re the only 2 reporting this
    No dia 12/05/2015, às 02:34, abaynoash <[email protected]> escreveu:
    Photoshop CC 2014 font issues
    created by abaynoash <https://forums.adobe.com/people/abaynoash> in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7535637#7535637>
    I'm having the same issues and use FontExplorer X. What is the solution?
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7535637#7535637 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7535637#7535637
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Photoshop General Discussion by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 94>
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

  • PDF Format Oracle Reports font issue

    My process is generating the batch oracle Reports.
    Their key map is:
    Key1: %* server=server1 userid=xxxs/xxx@xxxx report=D:\sample.rdf destype=file desformat=PDF
    My process is calling IAS server to generate report. IAS ser is generating and saving the report in the specified location.Reports are running on the server locally and DESTYPE=FILE. So the Oracle Reports output is saved on the server itself. Whenever i open the report on my machine/server i have font issue. Some of the reports has very tiny font. It seems the reports generated by using oracle reports which is Arial Unicode font type is causing the problem. If any reports other then Arial Unicode font like Arial Westrn, those reports are fine. We have 1000s of reports. So we don't want to change each report font type. For me it seems the issue is with the font on the server. Is there anyway to ask App server use Arial Westrn if Arial Unicode not found. How to make these configuration changes in the server. Any suggestions please.

    Maybe this helps or at least points you in some direction ...
    Have a look at font aliasing when configuring Application Server : http://download.oracle.com/docs/cd/B14099_19/bi.1012/b14048/pbr_font.htm#i1006140
    If your Application Server is located on Windows I would suggest to install the fonts there.
    In Unix, this a more complex task.

  • Font issue between Reports Designer and Report Output

    Hi.
    I've succesfully migrated several reports from 6i to 10g (10.1.2.0.2) with and without parameter form. However, I have the following font issue:
    - When report is run from Reports Designer, font is kept.
    - When report is run from a forms module (through rwserver on the same machine, that is not really from an application server, but using Oracle BC4J or Developer Suite enviroment) the report output is different. In this case a bigger font is displayed and occasional truncation happens for some fields.
    The question is: How can i avoid this difference in font behaviour?. Is it font.ali related?. How come this happen on the same machine(Windows XP)? These reports are to be deployed on Linux, where reasonably, and font machine is expected to happen.
    Font used: Arial (Occidental) 9

    this might be an issue with the printer that is associated also, and the permissions to the printer that you might have..
    login to the application server machine and restart the reports server as an admin..try running the reports via the URL..i have a feeling that this issue might be somethiing to do with the permission(s) to the printer from your AS machine

  • ICal Print List Hang / Font Issue / Sync Problems...

    Okay, here's a couple issues all wrapped up into one thread/post - reason is cause I suspect they may all be tied together somehow, but am not sure.
    Sync Problems...
    Regarding the Syncing problems, you can find an ongoing thread about @ http://forums.markspace.com/viewtopic.php?t=1632
    In short, some of us are having issues with events syncing to our Palm to the wrong timezone, causing them to be an hour off (usually within the new & old DST date change). Yes, all the usual fixes have been tried - pls read the thread noting "adairnet" and ymatto" postings.
    Also, in addition to this time issue, I have iCal events that I've deleted in iCal still show up on the Palm after one-way syncing!
    Print List Hang...
    Every week I print a "list" of events from a certain calendar. The past couple weeks I noticed some lines in the notes field printing on top of each other. Twas odd indeed, but I hadn't had the time to look into the reason. Then this week I was going thru my usual printing proceedure and now iCal locks up, hangs up, crashes, forcing me to force-quit the program. It's usually after I extend the dates beyond 2 or 3 days, but I've not been able to find a consistency. I've redone events thinking they were corrupt with no success.
    Font Problems...
    After the Print List issue above, I opened my Console program to see if it was reporting anything. At first it indicated that it could not find Helvetica Neue and would substitute it for Helvetica. This put me in touch with some font corruption - so I got rid of those bad fonts and activated Helvetica Neue which got rid of that message. But made me wonder if there are more font problems causing the print hanging & syncing problems. I have FontAgent Pro and do have some font issues that I'm trying to work out.
    But the Console is displaying another string of messages every time the Print List proceedure hangs up which I cannot figure out...
    2007-04-24 16:24:54.151 iCal[28975] NSATSGlyphStorage inconsistency. Cannot find run storage for character range {138 67} for CTRun 0xDBE87D0. Ignoring the run...
    2007-04-24 16:24:55.175 iCal[28975] -[NSMutableStringProxyForMutableAttributedString replaceOccurrencesOfString:withString:options:range:] called with out-of-bounds range. For apps linked on Tiger this will raise an exception. For earlier apps it will produce this one-time warning and continue with existing behavior (which is undefined).
    2007-04-24 16:24:55.176 iCal[28975] * NSThread: ignoring exception '* -[NSMutableStringProxyForMutableAttributedString replaceOccurrencesOfString:withString:options:range:]: Range or index out of bounds' that raised during delayed perform of target 0xdde58d0 and selector 'renderPreview'
    So, all of this is causing me to wonder if the iCal or SyncServices database is corrupt. Is there a way to dig into the iCal db and check for corruption &/or fix it?
    Or does anybody have any further suggestions on any of these issues?
    thanx.jason.

    RedKamel,
    The SyncServices folder should be avoided like "a swarm of bees". This article discusses some of the issues that can arise when the SyncServices folder is deleted or modified:
    http://docs.info.apple.com/article.html?artnum=301920
    Data loss and Data corruption can result from deleting or modifying the SyncServices folder, and that data loss or corruption can be propogated to devices, .Mac, and other applications that sync with SyncServices.
    If you have isolated an issue with the other steps in your post, I would recomend speaking with AppleCare before removing that folder.
    Hope this helps,
    Nathan C.

  • Acrobat 7 Pro - Comment Summary Font Issue

    We have a situation involving font usage in comments in Acrobat 7 Pro that I hope someone can shed some light on. It will be some time before we can move to version 8 or 9, so the problem is important to us.
    Here's the symptom, then I have a few basic background questions. The text in a Note comment includes a 'less than or equal to' symbol which appears correctly. The problem comes when the comments are summarized to a PDF file or printed. The 'equal to' portion has now disappeared! I first thought that this might be a font issue, but now am unsure.
    My basic questions are:
    What font is Acrobat using when a comment is created? I realize that you can set a preference for which font to use when viewing comments, but apparently not when creating them?
    When a comment summary is created to a PDF file, what determines which font is used in the summary? We have seen cases where the resulting PDF has used Arial or Tahoma or SimSun or.........
    We have had at least one situation where opening the same Acrobat 7 PDF in Acrobat 8 Pro did not exhibit the problem when summarized there. Was this a known issue that was repaired in Acrobat 8?
    Thanks much for any information you can provide.

    Hi David,
    This is a known issue with Acrobat on Mac.
    Please follow the steps mentioned in the KB : http://helpx.adobe.com/acrobat/kb/blank-eula-screen-appears-acrobat.html

  • Touch-up tool causes font issue in Acrobat 9 and X

    While I edit text using the Edit Document Text tool (formerly TouchUp Text) the font style are getting changed, for example If i select the Uppercase style text using Document Text Tool after exit the selection and trying to save as  the doucment some characters with in the text changed into lower case. In Acrobat 7 and 8 the TouchUp Text tool works fine. Please suggest a solution to get rid of this issue in 9 pro and X pro.

    Hi LoriAUC,
    I have attached the screenshots  for your reference, How I selected the text and what the problem was occur in the pdf files. Actually this is pdf file which is exported from InDesign as per customer provided export settings. if I change 100% of subset fonts in that export settings(See the screenshots below) I can get rid of the font issues in Acrobat 9 and X pro but I am not supposed do any changes in that settings.
    If you want check/analyze the problematic pdf file I can send it as an attachement to your mail ID? if so please let me know your mail ID.
    Please let me know if you need any other details or questions to be clarified regrading this.
    Thanks for your  support.

  • Font issue in ECC 6.0 upgrade

    can any one please tell me
    regarding the font issues in SAP SCRIPT some of them fonts are not upgrading in ECC 6.0 VERSION as in 4 and 5 version.
    please suggest me to solve this problem.
    please help me its urgent.

    in this case u have to check the syntax of ur driver program, 2. have to check the NACE settings for output type and Medium also.
    Regards
    Peram

  • Font issue in Acrobat 8

    We have been having problems with .eps files placed in Quark and exported to a pdf. In Acrobat 7 standard the fonts from the .eps file gets garbled when read on the PC. Use local fonts seems to cure this problem, but I took the pdf file and opened it in Acrobat 8 and got this message. "Cannot extract the embedded font 'XYSNP+Trajan-Regular'. Some characters may not display or print correctly." Now all the surrounding text in Trajan that was input from Quark 6.5 changes to a different font when printed. Would switching to an Opentype version of the font solve this problem?
    Thanks

    I have been having the same sort of problem but with Illustrator CS3, Photoshop CS3, InDesign CS2, and Acrobat 8 Professional. I am the only Mac in the building (brand new system), everyone else is on PC. I am only getting the font issue with the Optima family. The school I work for purchased the font as a PostScript Type 1 outline font. We were guessing that I might be having issues because I am on a Mac.
    When working in InDesign, I have to print off most of my pieces on an inkjet printer, if I try to print to a xerox laser, Indesign crashes or pops up with an error "There is a problem with the font Optima." I have been using both methods for creating a pdf in indesign:exporting to and printing as.
    If I use the optima font in Illustrator I get a "can't print the illustration. There's a bad font used in the system" error.
    When I create PDF's through Indesign, the PDF turns out fine on-screen, but the error message pops up "Cannot extract the embedded font 'XQFZSM+Optima'. Some characters may not display or print correctly."
    When I try to print the PDF out on either a laser or inkjet printer, the optima font has a lot of missing letters or is replaced by a different font.
    This has been very frustrating. The weird thing is that it doesnt happen with all projects that use the optima font. I have done some very small projects (envelopes, postcards) and have either had an issue or no issue at all with optima; and Ive worked on larger projects (magazines, newsletters) and have almost always-from what I can remember-had a problem.
    Is this something that I can fix with program settings? Or would a Mac compatible font be the solution?
    Thanks

Maybe you are looking for