LabVIEW 2010 64 bit Evaluation Download Error

After downloading the 890 MB file from NI, I ran the installer and received the following error:
Zip damaged: file c:\national instrument downloads\labview 64-bit\2010\products\labview64\part04\mib.cab: Bad CRC. Possible cause: file transfer error.
I repeated the download and got the same error.
Does NI know about this?
CB

StephanieO,
I am running a brand new installation of Windows 7 64-bit. I should have been clearer: the problem is not in the download process. It crops up during about 1/3 of the way through the unzip process for the downloaded file, 2010LV-64bit.exe.
The image is attached.
Thanks!
Attachments:
lv64 unzip problem.jpg ‏76 KB

Similar Messages

Lync 2010 won't download - error says it requires Windows 7

Lync 2010 won't download - error says it requires Windows 7 BUT I HAVE WINDOWS 7 !!
Very frustrating. After using Lync 2010 for the last year it did an auto-update and at first said it was missing a file. So I uninstalled and reinstalled and now am told that "Only windows XP3, Windows Vista and Windows 7 are supported. Please upgrade
your PC" But I DO have Windows 7.
Yes I know it's old. My new PC is sitting here waiting for me to change over but that can't happen for another month or so as I need more memory in it. In the meantime, I need to get my Lync 2010 working again.
Any help is greatly appreciated!

Hi,
This was finally figured out by someone internal to my company, a Lync specialist. This is what the solution was (in I.T. speak - sorry, I'm not I.T.):
Resolution: Checked and found COE was configured to run on XP SP3 where the minimum requirement is SP3
He definitely was opening files and checking boxes way beyond my simple "uninstall" and "reinstall".
Thanks!

Visio Evaluation Download error

Server Error in '/en-us/evalcenter/wizards' Application.
Could not submit communication trigger. Result code was: UnknownFailure
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: MS.Marketing.RegSys.Proxy.TriggerException: Could not submit communication trigger. Result code was: UnknownFailure
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[TriggerException: Could not submit communication trigger. Result code was: UnknownFailure]
MS.Marketing.RegSys.Proxy.WizardTrigger.Submit(TriggerData triggerData, SubscriberInfo info) +1140
[TriggerException: The wizard contains trigger data, but the trigger could not be submitted]
MS.Marketing.RegSys.Proxy.WizardTrigger.Submit(TriggerData triggerData, SubscriberInfo info) +1357
RegSysServices.Clients.MsiMapper.SubmitTrigger(WizardResponse response, TriggerData triggerData, CustomerEmail profileEmail) +473
RegSysServices.Clients.MsiMapper.Write(WizardResponse response, TriggerData triggerData, Int32 localeId) +2460
RegSysServices.Clients.AuthenticatedProfileClient.Save(MicrosoftIdentity id, Int32 localeId, WizardResponse response, TriggerData triggerData) +41
MS.Marketing.RegSys.WebControls.<>c__DisplayClass48.<DoCompleted>b__40() +172
MS.Marketing.RegSys.WebControls.Wizard.TryAction(Action a) +162
MS.Marketing.RegSys.WebControls.Wizard.DoCompleted() +1509
MS.Marketing.RegSys.WebControls.Wizard.PageNext() +749
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +103
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +140
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +32
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3103
Version Information: Microsoft .NET Framework Version:2.0.50727.8009; ASP.NET Version:2.0.50727.8010

Hi Sir,
Would you please let me know which link you used to download Visio trial version?
Please check if you download from following link (It works for me)
http://www.microsoft.com/en-us/evalcenter/evaluate-visio-professional-2013
Then, please see the similar thread, provides a method and I copied here:
====
The issue was due to a phone number missing an area code or an address that was missing a zip code. You can adjust these values from the profile page here:
https://profile.microsoft.com
https://social.technet.microsoft.com/Forums/en-US/8a02a8d0-0cdc-4e19-933b-7d6df08a12c8/unable-to-download-any-eval-vhd-or-iso?forum=tnfeedback
====
If any update, please feel free to let me know.
Hope this helps.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Developer error when installing Labview 2010

Dear Administrator,
I uninstalled my old version of Labview 7.1 with Windows "Programs and Features", and try to install Labview 2010. However, error occurs.
It says:
" Developer Error. The following errors were found in your ini file:
1. Specified file not found: [Utilities] UpgradeManagerPostProcessro = bin\nipie.exe
2. Specified file not found: [Utilities] NISysinfo = C:\Users\...\NI.LabVIEW.2010.v10.0\bin\NISysInf.dll
Correct the ini file and try again."
My system is WIN 7 English version.
Help please.

Hello,
The first step I reccomend you try is to re-download the LabVIEW installer, and try to run it again. Also, make sure you have Administrator access on your computer.
You can download LabVIEW here.
Regards,
Matt M.
Applications Engineer
National Instruments

How to get the evaluation DVD of LabView 2010?

Hi

Hi 10cs38,
Although you enquired about the evaluation DVD of LabVIEW 2010, do you know that it is possible to download the evaluation version online via this link? This takes you to the download page for the LabVIEW Development System 2010 SP1.
Alternatively you can request a DVD from the try LabVIEW page.
Hope that helps and you enjoy using LabVIEW!
Tori
Tori
Student

LV runtime error in file C:\Program Files\National Instruments\LabVIEW 2010\CCodeGen\libsrc\os\rtx\LVThreads_rtx.c

Hello,
I tried to run my application on LM3S8962.
The build succeeded. All LEDs are green,
but the application doesn't run.
The error message appears in the status window:
[17:06:21] Status: Build Succeeded.
LV runtime error in file C:\Program Files\National Instruments\LabVIEW 2010\CCodeGen\libsrc\os\rtx\LVThreads_rtx.c at line 141: 2 19
This message isn't really enlightening to me.
Doesn't anyone know how to solve the problem?

Hi Peter,
i tried to modify the code to isolate the problem.
With the attached code the new error message appears:
LV runtime error in file C:\Program Files\National Instruments\LabVIEW 2010\CCodeGen\libsrc\blockdiagram\CCGClusterSupport.c at line 141: 2 13
What are the limits of clusters in LV ARM?
My Toolchain:
Tool Version Numbers:
Toolchain:        RealView MDK-ARM Version: 4.11
Toolchain Path:    BIN40\
C Compiler:         Armcc.Exe       V4.0.0.728
Assembler:          Armasm.Exe       V4.0.0.728
Linker/Locator:     ArmLink.Exe       V4.0.0.728
Librarian:             ArmAr.Exe       V4.0.0.728
Hex Converter:      FromElf.Exe       V4.0.0.728
CPU DLL:               SARMCM3.DLL       V4.11
Dialog DLL:         DLM.DLL       V1.19a
Target DLL:             BIN\UL2CM3.DLL       V1.63
Dialog DLL:         TLM.DLL       V1.19a
Thanks
Marco
Attachments:
ICUA4_SOURCE_DISTRIBUTION.zip ‏463 KB

Building App Gives Error 6 about 50 - 80 - 99% of the time. Windows7, LabVIEW 2010 SP1

Hi
First off here is a link to a discussion of the problem. http://forums.ni.com/t5/LabVIEW/Error-6-occurred-when-building-an-Executable-in-Labview-2009/m-p/997...
I have tried all the suggestions on this link with no luck.
Background: have been using LabVIEW 2010 without problems since Sept, then I started getting the error 6 with the following message.
" Error 6 occurred at Delete in AB_Engine_Delete_Internal_Files.vi->AB_EXE.lvclass:Build.vi
->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller "
This started on one project and is now occurring on another project. Sometimes it builds 50% of the time, other times I can't get it to build at all. I have upgraded to SP1, no change.
Here are some things I have tried.
Moved build directory to c:\a
Renamed project, moved project right under c:\
Disabled Google , disabled Win indexing, disabled Win7 user acct. Control, run LabVIEW as Admit all the time, win explorer closed
mass compiling, closing the project, closing LabVIEW, re-booting
Unistalled LabVIEW 2010 SP1 and re-install, twice.
I believe I rebuilt my project in a new project.
I moved my projects to a WinXP system laptop I have, and they never get Error 6 ! Short term fix, but I have to use Win7. So I hope this means it is not my code.
The funny thing is that this is totally random. The unfunny thing is having to explain to a client I can't get my code to compile during a frustrating 95% of the time failure episode, yikes!
Any help and suggestions would be welcome.
BTW, the next step is to totally uninstall LabVIEW with a 'special' procedure and piece of code sent to me. Don't want to, but am really at wits end. Also waiting to hear back from my service ticket, but am desperate to have parallel solutions to try.
Thanks
Mark Ramsdale

Thanks for the clarify.
I also meant to post this link. It has a lot of info, this is the link I tried most if not all of the suggestions for.
http://forums.ni.com/t5/LabVIEW/Get-Error-6-about-50-of-time-when-building-Application/td-p/1242634
By the way, I was told that uninstalling LabVIEW will not resolve the issue, dodged a time killer :-)
It seems the error is caused by Win7 and file reserving. Waiting to hear back on that. Have an SR.
Again, any suggestions welcomed, maybe some Win7 ideas from those who know more about it.
mr
Mark Ramsdale

Facing memory error during shifting from 3d stem graph to 3d surface graph in labview 2010

hello all,
earlier I was using 3D Stem graph in labview 2010. Now we want to move to Surface plot for same data.when i am trying surface graph it shows memory error.
I have 10240 data.
I was using vector method in stem graph so now for Surface graph i have thought that i have to make matrics of 10240x10240 and its diagonal elements should be my Z co0ordiants.
plz help me out here.
thanks & regards,

hello mikeporter,
thanks for reply.I am attaching my Vi. It has some error also.plz look into it.
X and Y are my co-ordinates pairs.I will be having values for these and have to update for same.
Attachments:
Untitled 2_surface.vi ‏184 KB

I'm getting a cwinstr error after upgrading from labview 7.0 to labview 2010

Hello
recently upgraged a PC from Labview 7.0 pro to Labview 2010 pro. Now I can not open a calibration executable we been using for a xantrex xfr power supply (unfortunately I don't have source code). The only error I get is "cwinstr-can't load program" pop-up when trying to run the executable. The calibration SW will run on multiple platfroms, Win 95, Win 200 0 and XP and this is the first time getting this error. The calibration SW ran fine until the Labview 2010 install. My question is does LV 2010 change the registry files when loaded? Visa and MAX still run fine on this PC and were loaded when LV 7.0 was installled. I know the calibration SW uses the VISA drivers so this is what's confusing. i don't want to downgrade back to LV 7.0 unless I have to.
Thanks

Hello Tanya,
I'm a little confused here. i only started having issues with the executable (it ran previously with the visa drivers from 7.0) after I loaded LV2010. After the install, the exectuable started giving me the cwinstr error. As best I can tell, this may be an activex issue, but since I only have the executable it hard to tell.
My question id do i have to install both labview 7.0 in addition to labview 2010 on the pc. Fom the the readme file, it looks like Labview 2010 won't support certain vi's older than 8.0. But since I'm dealing with an exectuable only here, I thought I should be able to open it at least.
So instead of updating the visa drivers, should i re-install the old visa drivers (Ni-Max) for 7.0 instead? would this even work without removing LV2010.
Thanks Again

Labview 2010 64-bit property node setting

I am trying to set the selection start and selection size for an array in LabVIEW 2010 64-bit on a Windows 7 64-bit machine.
LabVIEW 2010 64-bit crashes and is shut down by Windows.
The call works fine in LabVIEW 2010 32-bit on the same machine.
The computer is a Dell Precision 3500 with 4 GB ECC memory, an Intel Xeon 3530 2.8 GHZ CPU, and a 320GB hard drive. I have LabVIEW 2010 Service Pack 1 installed.
Here is an example of code with just one property node call.
Is this a bug or something weird with my system.
Attachments:
Array Property Node Crash Example.png ‏24 KB

I was able to reproduce the problem, also using LV2010 64-bit on Windows 7 64-bit. I tried various representations of the array data type as well as trying to not include the data type for the control reference as well as trying it via a property node in the calling VI. LabVIEW crashed each time. I'd say it's definitely a bug.

LabVIEW 2010 Evaluation Mode not runing Real Time

LabVIEW 2010 Evaluation Mode not runing Real Time
Attachments:
real time.jpg ‏133 KB

Have you tried re-installing the Real-Time module (both on the target and the PC)?
Have you verified it's activated?
Have you tried re-installing the evaluation license files? http://joule.ni.com/nidu/cds/view/p/id/2068/lang/en
In other words, what have you tried?

Error 7 when opening file running LabVIEW 2010 executable

I am using Open/Create/Replace File in LabVIEW 2010 to open a text file. This works fine until I compile the code. I then get Error 7. I have tried paths that look like the following but none work.
c:\<directory name>\file.txt
c:\<application name.exe>\file.txt
c:\<application.exe>\<directory name>\file.txt
Thanks
Solved!
Go to Solution.
Attachments:
read.vi ‏17 KB

You have to get the path to the folder of the .exe. Then strip off the .vi name and the .exe name. Then Build onto the path from there to get to your .txt file. The way you have it, you are treating the .exe as a folder rather than a file. The text file is not part of the .exe, so you can't create a path that includes the .exe name.
Why Does My Executable Not Work When Using the Current VI's Path Constant?

LabView 6.0 Evaluation version load error (20)

Hi,
I wrote three vi files in LabView 6.0 evaluation version. Afte instaling the 6.1 full version the vi could not be load, giving a code 20 load error. All other vi files loaded normally.
I could not find any special instructions in these files.
Any ideas?
Yossi
Attachments:
Bessel_Function_j(x)-Spheric-011009.vi ‏146 KB
Read_From_V8_File.vi ‏58 KB
Read_File+_[V8].vi ‏67 KB

Yossi,
Refer to the following KnowledgeBase on our website:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/5654f94cdf5954ff86256b37006758c0?OpenDocument
Regards,
Cyril Bouton
Applications Engineer
National Instruments
Cyril Bouton
Active LabVIEW Developper

Error 404 causes Labview 2010 to crash but only occasionally

Hello,
I am requesting help to solve a problem with LabVIEW 2010 crashing. I am new to this company and the last Labview developer left without providing
background on this problem. Labview crashes after running project VIs. Labview closes without warning or error messages. The project acquires data from pressure transducers, dP transducers, thermocouples, IEPE, load cells, and voltages through NI real-time system and has digital I/O. NI hardware includes PXI-1050 with modules 6221, 6280, 6224, 6220 and NI PXI-1052, SCXI-1306, SCXI-1112, SCXI-1520, and SCXI-1102. I've reviewed the labview program and the software relies heavily on shared variables, references, and local variables but I cannot find anything that stands out as a problem in the software .
The program crashed again today after running for only 1/2 hour and was not recording data. No error message occurred before the crash and the only error after restarting LabVIEW was the standard message that LabVIEW did not close properly. I went to the Event Viewer and at the time of the crash I received the following information:
Event ID = 3299
Source = LabVIEW
Log = Application
Level = Error
LabVIEW Information: Error 404 "Not found" for "/national instruments/ real-time execution trace toolkit/ 2.0/ trace receiveport", file "Crogram files (x86)/ national instruments /shared/ ni webserver/ www/ national instruments/ real-time execution trace toolkit/ 2.0/ trace receiveport": Can't access URL
According to Event Viewer, this error 3299 occurred 15 times in the last 3 days. LabVIEW crashed today at 10:19 am at the same time this error 3299 occurred but LabVIEW did not crash the other times this error occurred in the last 3 days. I believe this error is related to the crash but does not usually cause the crash. It appears to me from reading the error message that the error is the result of occasional lose of communication with the real-time system (Can't find URL). Any suggestions how to resolve this would be greatly appreciated.
Bill

1. Have you had this code working before on this or another machine?
2. Which operating system and version of LabVIEW are you running? (This can be found in Control Panel >> All Control Panel Items >> System)
3. Which National Instruments Drivers are you using? (This can be found in the measurement an automation explorer under the software tab [a screenshot would be good])
I would look into removing afsetup.exe which is a data collection tool provided by Microsoft which could a) not be installed correctly and/or b) trying to pull data from LabVIEW. I think this may help you out, as even though your programs aren't explicitly calling it, the service is running in the background.
Secondly, I would look into stopping the NI Web Server application that could be polling a web page that's not needed.

Error -1950679023 en labview 2010 y crio

Hola, tengo un error en el programa host (error -1950679023) y pasma el programa del crio, todo desarrollados en labview 2010, espero alguien me pueda apoyar.
Gracias.
JZR

Hola JZR;
La primera razón por la cual podrías tener este error es debido al firewall de la máquina que está bloqueando el uso de las variables compartidas.
Para asegurarte de que el problema no sea el firewall te recomiendo visites este sitio:
Configuring LabVIEW, LabVIEW DSC and Lookout to Work With the Windows Firewall
Otra opción, es que estés perdiendo la conexión con el host
What Happens When my Shared Variable Engine Goes Down Unexpectedly?
Espero esta información te sea útil
Exito en tu aplicación

LabVIEW 2010 64 bit Evaluation Download Error

Similar Messages

Maybe you are looking for