LabVIEW 2010 F2 - Plantage - Problème de localisati​on ?
Bonjour à tous,
Je rencontre un comportement assez bizarre de la part de LabVIEW. En effet celui ci plante lorsque je passe d'un noeud de propriétés (VI Server) à un autre.
Pour reproduire le comportement placez un noeud de propriétés de VI Modifications:VI (CTRL+SHIFT+B). Reliez la sortie de ce noeud de propriétés à une structure condition. Jusque la tout va bien vous obtenez ce diagramme (plus ou moins ) !
Seulement, maintenant si vous changez la propriété Modifications:VI pour Modifications:Face Avant, soit LabVIEW plante, soit il affiche la flèche brisée et si l'on clique dessus, ou tente de sauvegarder le VI, créer un extrait de VI etc...On obtient dans tout les cas l'erreur suivante :
FPSane.cpp ligne 442
Est-ce un bug de version localisée ou un bug pour toutes les versions de LabVIEW ? Si oui y'a t'il déja un CAR en cours ?
On peut contourner ce plantage en créant directement le bon noeud de propriétés et en le reliant ensuite à la structure condition, mais au milieu d'un développement c'est exaspérant.
VI de test téléchargeable ici
Cordialement,
Da Helmut
Bonjour,
Brice et moi même avons remarqué le problème. En effet, dès lors que la représentation de la valeur de sélection de condition est changée en un certain type, il apparait soit une erreur, soit les différentes conditions ne sont pas mises à jour.
La version 2009 FR de LabVIEW accepte le type quad non signé en sélection de condition, ce qui n'est pas le cas de la version 2010 FR.
Ceci étant, nous ne savons expliquer cette erreur et recherchons l'origine du problème (localisation, ou toute version).
Cordialement,
Romain P.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> NIDays 2011, le mardi 8 février au CNIT de Paris La Défense
Similar Messages
-
Bonjour à tous,
Je viens ici vous rapporter un petit bug concernant LabVIEW
2010 (F4).
Lors que l’on a utilisé une définition de type stricte
comprenant un cluster (obligatoire) qui contient lui-même différents types de
données (peu importe) pour créer une constante sur un diagramme et que cette
définition a été supprimée, cette
constante est affichée en transparence sur le diagramme (jusque là tout est
normal).
Si par malheur on a l’idée d’effectuer l’opération « Visualiser
en tant qu’icône » sur cette constante de type cluster, on obtient un
plantage de LabVIEW.
Est-ce un bug connu ? A-t-il déjà été rapporté ?
Problème uniquement sur la version française ?
Cordialement,
Da HelmutHello,
Ca ne sert strictement à rien, c'est sur mais ce n'est pas normal que ça plante ! Au pire on pourrait obtenir un message d'erreur...
J'ai fait remonter l'info ici et sur le forum Américain. Après, c'est à voir qui veut augmenter ses stats de CAR au support
Cordialement,
Da Helmut -
Problème création .exe avec des VIs Expresse (Labview 2010)
Bonjour,
Actuellement en stage j'ai été chargé de créer une interface. Tout c'est parfaitement déroulé jusqu'à ce que je doive créer l'exécutable. En effet l'erreur 1052 se produit lorsque je souhaite créer mon exécutable. D'après ce que j'ai pu lire sur les forums ceci est du au passage de Labview 2009 à Labview 2010. N'ayant que Labview 2010 comment puis-je créer mon exécutable en conservant mes VIs Express ?
Si je ne peux pas conserver mes VIs Express par quoi puis-je les remplacer ?
J'utilise les Vis Express suivant : Ecriture et lecture d'un fichier de mesure et construction d'un tableaux.
Merci d'avance,
J-R
Résolu !
Accéder à la solution.Bonjour,
Il vaut mieux ne pas utiliser de VIs express pour faire un exécutable.
En ce qui concerne les fonction Ecriture et lecture d'un fichier, tu peux utiliser les fonctions Ecrire dans un fichier au format tableur et Lire un fichier au format tableur. En ce qui concerne la construction d'un tableau, tu peux utiliser la fonction Construire un tableau.
Cordialement. -
Bonjour,
J 'ai créer un VI qui tourne sur Labview 2010, je souhaiterai créer un (EXE) avec application builder que j'ai à l'essai encore un mois.
Mais quand je cliques sur "construire l'application (EXE) à partir un VI", le processus ne se termine pas et j'ai le message suivant:
Une erreur s'est produite lors de l'enregistrement du fichier suivant :
C:\Program Files\National Instruments\LabVIEW 2009\vi.lib\Platform\express\TDMExpress.llb\ex_createorOpenTDM.vi
Et les détails du message dit:
Visitez la page de demande de support sur ni.com/ask_fr pour en apprendre davantage sur la résolution de ce problème. Utilisez les informations suivantes comme référence :
L'erreur 1502 s'est produite à : AB_Source_VI.lvclass:Close_Reference.vi -> AB_Build.lvclass:Copy_Files.vi -> AB_Application.lvclass:Copy_Files.vi -> AB_EXE.lvclass:Copy_Files.vi -> AB_Build.lvclass:Build.vi -> AB_Application.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Engine_Build.vi -> AB_Build_Invoke.vi -> AB_Build_Invoke.vi.ProxyCaller
Raisons possibles :
LabVIEW: Impossible d'enregistrer un VI brisé sans son diagramme.
Avez vous ce déjà eu ce problème?
Merci d'avance si quelqu'un peut m'aiderBonjour,
Finalement le problême vient d'un vi express, impossible de créer un exe avec le vi express "écrire dans un fichier de mesures".
Je l'ai supprimé et j'ai pu créer mon exe.
Est il possible de remplaçer ce vi express par autre chose ?
Attachments:
vi express.JPG 45 KB -
Impossible de créer un exécutable sous LabVIEW 2010
Bonjour,
J’ai une application écrite en LV8.2 qui tournait sans problème.
Je suis passé sous LabVIEW 2010, et j’ai une erreur au moment de créer un exécutable.
L'erreur 1 s'est produite à : Nœud de méthode dans AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Raisons possibles :
LabVIEW: Un paramètre d'entrée n'est pas valide. Par exemple, si l'entrée est un chemin, celui-ci contient peut-être un caractère qui n'est pas autorisé par le système d'exploitation, comme ? ou @.
=========================
NI-488: La commande requiert un contrôleur GPIB comme contrôleur en charge.
Nom de la méthode : Linker:Write Info To File
Apres quelques recherches, j’ai isolé le sous VI qui causait problème.
C’est un .Net qui permet de lancer un fichier.pdf
Si je mets directement cette fonctionnalité dans le diagramme principale (sans passer par un sous VI), j’ai le message d’erreur suivant :
L'erreur 74 s'est produite à : Nœud de méthode dans AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Raisons possibles :
LabVIEW: Mémoire ou structure de données corrompue.
Nom de la méthode : Linker:Write Info To File
Remarque : J’ai fais un petite appli qui n’utilise que ce VI et je n’ai pas le PB.
Quelqu’un à t’il une piste de recherche ?
Merci d’avanceBonjour,
Lorsque vous créez un exécutable veillez toujours à n'avoir que la fenêtre du projet d'ouverte, j'ai déja vu le cas et ce type d'erreur apparaître lorsqu'une fenêtre d'un VI qui devait être compilé était ouverte.
Pour revenir plus en profondeur sur le problème que vous rencontrez, je vous invite à toujours effectuer une recompilation complète de tout les VIs de votre projet lorsque vous passez d'une ancienne version à une nouvelle version. Cela peut régler votre problème, la recompilation va effectuer un certains nombre d'opérations de façon à rendre le VI "compatible" avec la version utilisée.
Pour cela : Outils » Avancé » Recompiler.
Cette opération peut s'avérer utile dans votre cas.
Cordialement,
Da Helmut -
Compatibil​ité de Labview 2010 et NI-RIO 3.2.1
Bonjour,
J'ai un CompactRIO NI-9024 (contrôleur) et NI-9118 (châssis). Je viens de passer de Labview 2009 à Labview 2010. J'ai entre autres installé les module real-time 2010, softmotion2010f1 et module FPGA 2010.
En ouvrant un projet comme Servo Interface (9514), Labview donne une erreur sur le contrôleur 9024 me disant que les plug-in ne sont pas installé. Est-ce que la version du driver NI-RIO 3.2.1 peut être en cause. Dois-je installé le NI-RIO 3.5.1 pour être compatible avec Lbaview 2010?
Merci
Mathieu
Résolu !
Accéder à la solution.Bonjour,
J'ai installé le NI-RIO 3.5.1. Je peux maintenant ouvrir des projects exemple sans erreur. Par contre, j'ai un nouveau problème. Je suis capable de voir le CompactRIO dans MAX. J'ai d'ailleurs mis à jour le driver dans mon NI 9024 (voir pièce jointe) et donner l'autorisation à Labview dans le Pare-feu Windows.
Cependant, je ne suis pas apte à lire détecter le CompactRIO et ses modules lorsque je crée un projet Real-Time ou un projet FPGA.
- Le CompactRIO est sous tension.
- L'ordinateur a été redémarré.
- Le câble Ethernet est branché dans mon ordi et dans le port 1 du NI 9024.
Avez-vous une idée du problème?
Merci à l'avance
Pièces jointes :
MAX.jpg 209 KB
MAX_2.jpg 342 KB -
Comment lire un exemple sous labview 2010 avec labview 2009
Bonjour,
On trouve aujourd'hui de plus en plus d'exemples ou de réponse sous Labview 2010. Mais comment faire pour pouvoir les ouvrir lorsque l'on ne possède que la version 2009?
Merci d'avance.
Il m'est impossible de faire acheter une nouvelle version tous les ans...Bonjour,
Vous pouvez faire une demande de conversion vers une version précédente ici : http://forums.ni.com/ni/board/message?board.id=170&thread.id=473172
Ou installer (sur une machine virtuelle si vous ne voulez pas avoir de problèmes avec vos développement) la version d'évaluation de LabVIEW 2010 pour faire la conversion en 2009.
Cordialement,
Da Helmut -
Fonction déconvolution bug labview 2010
Bonjour,
Je voulais tester la foction de déconvolution dans labview 2010. Mais je fais planter labview à chaque fois :
pas d'erreur notifiée, et impossible d'arreter le programme an appuyant sur l'arret d'urgence
=> je suis obligé d'arrêter Labview avec le gestionnaire de tâches.
Je suis sous windows XP 32 bits.
Est-ce que quelqu'un a déjà rencontré ce problème faut-il unstaller qualquechose dans labview???
Merci d'avance
ci joint le programme
Dcharala, Ingénieur en instrumentation, pratiquant de LabVIEW 2010 sur Windows XP.
Résolu !
Accéder à la solution.
Pièces jointes :
Test déconvolution.vi 2626 KBEffectivement.
Cela fonctionne aussi si tu décimes les points du graphe d'origine. (j'ai décimé par 10 pour le test)
Après, les résultats ne sont pas du tout les mêmes, et je ne sais pas ce que tu attends comme résultat.
Cordialement,
Olivier L. | Certified LabVIEW Developer -
I build an application exe and then its installer along with run time environment.
The installers instals the application correctly but when I try to execute the application, I get an error that application has crashed and Windows must close it down or search for solutions online with this additional information for the crash.
Problem signature:
Problem Event Name: APPCRASH
Application Name: AGMS.exe
Application Version: 1.3.0.0
Application Timestamp: 4c24e8f5
Fault Module Name: lvrt.dll
Fault Module Version: 10.0.0.4033
Fault Module Timestamp: 4c9273f4
Exception Code: c0000005
Exception Offset: 00005310
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I am using labview 2010 sp1 32 bit on a 64-bit machine, with the following specs
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130318-1533)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: Dell System XPS L502X
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (8 CPUs), ~2.0GHz
Memory: 8192MB RAM
Available OS Memory: 8106MB RAM
Page File: 3457MB used, 12753MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
The exe /application runs fine on my PC but when I try to run it on another PC it crashes. The other PC has similar specs as given below
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
Language: English (Regional Setting: English)
System Manufacturer: LENOVO
System Model: HuronRiver Platform
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz (4 CPUs), ~2.2GHz
Memory: 4096MB RAM
Available OS Memory: 4010MB RAM
Page File: 1359MB used, 6658MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
I tried another machine, 64 bit of course, as I want to deploy my application on a 64bit PC, but still got the same problem.
This other machine was from HP, iCore 3 (4 CPUs) 2.2GHz, 4GB RAM and running Windows Professional 64 bit.
Now as I see it, it could be a Run-time environment mis-match error.
For this I tried installing a 64 bit LVRTE from NI, but still no sucess.
I checked DEP, for all 3 PCs and it was set to the following
Turn on DEP for essential Windows programs and services only (first option).
I am confused. I can not find a solution for this and it is really frustrating.But I am assuming that when I make the installer, the 32-bit Run Time Engine is appened with the installer, as show below
Since from the picture you can see its including the support installers from '\Program Files (x86)\'
The application runs queries to fetch data from database in SQL server 2008, and for that I am using a Microsoft SQL Native Client 2008 R2 64 bit ( this is the only version that installs on either PC, even the one on which I developed my LV Application).
I am not using any driver, only toolkits for reports - and for that I un-checked the "Remove unused polymorphic VI instances" when making the executable, otherwise LV throws up an exception that share variable are not being included.
Yes I did reboot every time after I ran the installation.
Still getting the same error. -
Run-time engine problem in Labview 2009 and Labview 2010
I have a problem with Labview 2009 and Labview 2010. I updated my Labview 2009 into 2010. But it turned out to be a trial one, because i did not have the serial number. So I uninstalled the Labview 2010. however, the funny stuff came over. I cannot use my Labview 2009. So i uninstalled Labview 2009 again. But eventually, I could not reinstall Labview 2009. Every time i had a runtime error and i could not proceed with the installation. in addition, any installation related to Labview is not permitted and the same error came up every time. it is very annoying.
So, What is the deal?
I attached the error here. Any comments or advice are welcomed and appreciated.
Attachments:
error.docx 2305 KBBy chance is this machine's language set to any non-English locale? You would check the locale setting by:
Opening Control Panel.
Opening "Regional and Language Options".
Looking Under "Regional Options" >> "Standards and Formats"
If it is set to something besides English, trying setting it to English and please report back what locale it was set to (or if this even solves the problem).
Regards,
- WesW -
Report Generation toolkit for labview 2010
H All.
I'm looking to download the report generation toolkit for labview 2010. When I proceed to download the toolkit from the national instrumnets website, it says that i need to labview 2011 or later in order to install it.
Is there a version of this report generation toollkit for labview 2010 and can someone provide a link maybe??.
Thanks for reading.
Solved!
Go to Solution.Try this: [Link removed, NI software downloads can be found on ni.com/downloads, the LabVIEW 2010 Report Generation Toolkit is available to customers with Standard Service Program here: http://joule.ni.com/nidu/cds/view/p/id/3247/lang/en, other customers may contact NI directly]
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community. -
We want to use LabVIEW 2010 to send/receive floating points from LabVIEW 2010 to/from a network (192.168.101.xxx) that utilizes GE ethernet global data protocol (EGD).
The network has several HMI's running Cimplicity Plant Edition 4.01.
We can configure Cimplicity to read modbus points from LabVIEW using LabVIEW's multi-variable editor and a modbus slave library.
However, we cannot get the points from LabVIEW to read/write to the EGD protocol. Anyone ever run into this?EGD is a UDP message (port 4746h) with a special header.See below for header structure (32 Bytes). Send UDP at constant rate. Limit user data to 1400 bytes. If you want to receive EGD data don't forget to increase the MaxSize connector on UDP receive to 1500. Are you using the a csv file or SDB Server to get tag names? Or manually entering tag names in cimplicity? This works much better than OPC because all parameters are contained in your labview executable. If you have a redundant cimplicity HMi Server send as Broadcast to the local subnet. All consumers will get the EGD telegram. Example IPA of 192.168.0.255. Server 1 IPA 192.168.0.1 and Server 2 IPA 192.168.0.2
Maybe to late for this project but would be a good upgrade or the next project. -
Integral blocks from labview 7.1 where is in labview 2010
Hi I must integrate sampled signal. In labview 7.1 is good checked blocks for it. But where is equivalent in labview 2010?? I cant find it.
Solved!
Go to Solution.
Attachments:
calkowanie.png 2 KBhttp://zone.ni.com/reference/en-XX/help/371361G-01/gmath/integral_xt/
Did you try the search capability for the functions palette?
Attachments:
functions search.png 17 KB -
No longer able to import CVI Instrument Driver in LabView 2010
Hello,
I used to be able to download the Import CVI Instrument Driver Wizard in LabView 2009, but there is no wizard for 2010?
I also tried importing the driver with the shared library import, but then Binary, Slides and Rings do not come up with their values i.e. if my slide in CVI has 3 positions :
Description Value
Item 1 1
Item 2 2
Item 3 3
or if my Binary has
Description Value
On 1
Off 0
they do not import the description into LabView 2010?
I tried copying the directories created by the 2009-wizard to the directories of 2010 i.e.:
from C:\Program Files\National Instruments\LabVIEW 2009\resource\CVIFpConv
to C:\Program Files\National Instruments\LabVIEW 2010\resource\CVIFpConv
and
from C:\Program Files\National Instruments\LabVIEW 2009\project\_DriverCtoLV
to C:\Program Files\National Instruments\LabVIEW 2010\project\_DriverCtoLV
and the wizard loads and runs until I specify a .fp file and then I get the error in the jpeg attached. When I try to open the block diagram (FC_RFL_Initialize.vi), it says you need a password to view it, so that stops my debugging.
Attachments:
Error using Instrument Driver Import Wizard in LabView 2010.JPG 88 KBHI,
I downloaded the wizard and when I tried to import a driver I got this message shown below...(labview 2010)
Thanks...Ness
Attachments:
Error message.JPG 140 KB -
Hello,
I tried to run my application on LM3S8962.
The build succeeded. All LEDs are green,
but the application doesn't run.
The error message appears in the status window:
[17:06:21] Status: Build Succeeded.
LV runtime error in file C:\Program Files\National Instruments\LabVIEW 2010\CCodeGen\libsrc\os\rtx\LVThreads_rtx.c at line 141: 2 19
This message isn't really enlightening to me.
Doesn't anyone know how to solve the problem?Hi Peter,
i tried to modify the code to isolate the problem.
With the attached code the new error message appears:
LV runtime error in file C:\Program Files\National Instruments\LabVIEW 2010\CCodeGen\libsrc\blockdiagram\CCGClusterSupport.c at line 141: 2 13
What are the limits of clusters in LV ARM?
My Toolchain:
Tool Version Numbers:
Toolchain: RealView MDK-ARM Version: 4.11
Toolchain Path: BIN40\
C Compiler: Armcc.Exe V4.0.0.728
Assembler: Armasm.Exe V4.0.0.728
Linker/Locator: ArmLink.Exe V4.0.0.728
Librarian: ArmAr.Exe V4.0.0.728
Hex Converter: FromElf.Exe V4.0.0.728
CPU DLL: SARMCM3.DLL V4.11
Dialog DLL: DLM.DLL V1.19a
Target DLL: BIN\UL2CM3.DLL V1.63
Dialog DLL: TLM.DLL V1.19a
Thanks
Marco
Attachments:
ICUA4_SOURCE_DISTRIBUTION.zip 463 KB
Maybe you are looking for
-
Using boston acoustics digital ba735 speakers on my Mac Pro
just bought a Mac Pro. Would like to use my digital ba735 speakers from my old Gateway. These are proprietary and needed a digital sound card. Any way I can use some type of converter cord to accept the line out audio signal. mac pro Mac OS X (10.4
-
CTRL+HOME, CTRL+END not working correctly
I'm trying to use the CTRL+HOME and CTRL+END key combinations on my HP Spectre 13-3010dx. Unforturnately, when I press the combinations, they are not taking me to the beginning/end of a document in MS Word, nor the beginning/end of an Excel spreadshe
-
How to provide input help for a variant
Hi, I have a parameter on the selection screen. P_layout like disvariant-variant value check. How do I provide input help for this parameter and also how do i check wheather the input entered is correct or not.
-
Forgot password to a pages doc. how can I open it
I created a pages doc on my Mac Book and put a password on it to lock it. the password will not open it. Is there a way to retrieve and open the document on lap top or my iPad?
-
Correct installation of BDB XML on Mac OS X, and use with XCode
I downloaded the tarball, compiled the whole thing without a problem, and then copied the contents of the install directory to /usr/ (trying to change the prefix on the configure script stopped it from compiling, for some reason) because I didn't wan