LabVIEW caught fatal signal, reason unknown

hi, I have installed Labview 7 on Fedora Core 5 and it rans well untill yesterday, when I start labview, after the welcome picture, nothing more.
So I typed the command ``labview" at the shell prompt. Then the shell response me:
[root@silver ~]# labview
LabVIEW caught fatal signal
7.0 - Received SIGSEGV
Reason: unknown
Attempt to reference address: 0x0
Segmentation fault
I am very puzzled, coz it worked well before yesterday. All what I do is installed the ATI Radeon driver program onto my computer.
Can any one help me?
thx
Forrest Sheng Bao, Ph.D.
Assistant Professor, Dept. of Electrical & Computer Engineering
University of Akron, Akron, OH, USA
https://sites.google.com/site/forrestbao/

This problem is reproductible, my application crashs every time after
40-48h running, .
-- It looks like you have the 7.1.1 maintenance release installed and
I am assuming that you have seen this <a
href="http://digital.ni.com/public.nsf/websearch/A2D53C8E0D88380B86256EBD00..."
target="_blank">KnowledgeBase</a>&nbsp;about similar installation
errors.&nbsp; However, this KnowledgeBase also offers some steps for a
workaround.. have you tried these?--
Yes, I tried it. We have this problem at beginning and we correct it
but it is not the same one because without this realease you can't
launch Labview. And my application run without problem during 40-48h.
Have you heard about any function not supported by Labview under Linux
environment ? It may help me to go on debugging.

Similar Messages

  • LabVIEW caught fatal signal - Segmentation fault

    Hi,
    I've just obtained the Linux version of LabVIEW 7.0 from my University for academic use on my home PC, and I am having some difficulty getting the program to run. I've installed all of the "labview70-*.rpm" files into "/opt" using the "bin/INSTALL.norpm" from the CD (I am running Gentoo and don't have RPM support).
    When I try to run the program (cd /opt/lv70, ./labview), I get the splash screen, which says "Init temp resources file" in the bottom right corner. This stays on screen for about a minute, during which time, my RAM usage gradually goes very high, followed by my SWAP usage when the available RAM runs out (256MB RAM, 500MB SWAP). This happens regardless of whether I'm logged in as a normal user or as r
    oot.
    The splash screen eventually disappears and the following message is printed at the terminal:
    LabVIEW caught fatal signal
    7.0 - Received SIGSEGV
    Reason: address not mapped to object
    Attempt to reference address: 0x70126d74
    Segmentation fault
    I have checked the FAQs and knowledge base but can't seem to find anything that sounds similar to what is happening on my machine.
    My system is as follows:
    Athlon 1800+ XP
    256MB RAM
    Gentoo Linux 2.4.22-r2
    500MB SWAP partition
    24GB free space on hard disk
    Cheers,
    Martin

    Hey Martin,
    This is a new one for me. Try replaying your INSTALL and bin/INSTALL.norpm files with the one's that I've attached. They work well on my Debian machine (no rpm). That way you can run "./INSTALL" instead of INSTALL.norpm (which was only meant to be a helper app, not a primary method for installation.)
    As you probably know, reproducing a gentoo issue may be difficult because of the extreme customization. Is there anything uncommon that you might be doing? (using a locale other than C or POSIX, using a different threading library, etc.)
    Duffey
    Attachments:
    INSTALL ‏22 KB
    INSTALL.norpm ‏2 KB

  • LabVIEW caught fatal signal

    I am running the LabVIEW HTTP-server on a Linux server. When the traffic is to high LabVIEW crashes and I get the following error:
    LabVIEW caught fatal signal
    6.0.2Received SIGSEGV
    Reason: address not mapped to object
    Attempt to reference address: 0x0
    See LabVIEW_Failure_Log.txt for more information.
    The LabVIEW_Failure_Log.txt looks like this:
    #Date: Mon, Feb 18, 2002 02:48:30 PM
    #Desc: LabVIEW caught fatal signal
    6.0.2Received SIGSEGV
    Reason: address not mapped to object
    Attempt to reference address: 0x0
    #RCS: unspecified
    #OSName: Linux
    #OSVers: 2.4.16
    #AppName: labview
    #AppKind: FDS
    0x40257840 - __libc_sigaction() + 0x1f0
    0x083f2fbc - Exec() + 0x280
    0x082a7fb5 - ExecWrapper__FPv() + 0x41
    0x4021aeca - pthread
    _detach() + 0x562
    0x402fe3ca - __clone() + 0x3a
    Anyone knows what this means and how this can be fixed?

    I am getting a similar error with LV70 Linux when
    trying to start it in a WRQ window. Is there
    an answer to the question?
    LabVIEW caught fatal signal
    - Received SIGSEGV
    Reason: address not mapped to object
    Attempt to reference address: 0x50f
    Segmentation fault
    thanks,
    Dave
    Fermilab

  • WARNING: init(1M) exited on fatal signal 11: restarting automatically

    Hi,
    Today I did a blunder.
    I had to apply the patch "121208-02 SunOS 5.10_x86: ld & libc.so.1 Patch" .
    I downloaded it from www.sunsolve.sun.com.
    It was downloaded to /tmp/patches and unziped. After this I entered the following command:
    pkgadd -d /tmp/patches/121208-02
    instead of
    patchadd /tmp/patches/121208-02 121208-02
    I answered to install all of the below packages when asked.
    1 SUNWbtool CCS tools bundled with SunOS
    (i386) 11.10.0,REV=2005.01.21.16.34
    2 SUNWcsl Core Solaris, (Shared Libs)
    (i386) 11.10.0,REV=2005.01.21.16.34
    3 SUNWcslr Core Solaris Libraries (Root)
    (i386) 11.10.0,REV=2005.01.21.16.34
    4 SUNWcsr Core Solaris, (Root)
    (i386) 11.10.0,REV=2005.01.21.16.34
    5 SUNWcsu Core Solaris, (Usr)
    (i386) 11.10.0,REV=2005.01.21.16.34
    6 SUNWhea SunOS Header Files
    (i386) 11.10.0,REV=2005.01.21.16.34
    7 SUNWtoo Programming Tools
    (i386) 11.10.0,REV=2005.01.21.16.34
    It threw the below error message:
    Installing Core Solaris Libraries (Root) as <SUNWcslr>
    ## Executing preinstall script.
    ## Installing part 1 of 1.
    Segmentation Fault - core dumped
    Segmentation Fault - core dumped
    Segmentation Fault - core dumped
    pkgadd: ERROR: Unable to release package administration lock for this system; try again later
    pkgadd: ERROR: Unable to release package administration lock for this system; try again later
    -bash-3.00# man init
    Segmentation Fault (core dumped)
    -bash-3.00# init 1
    Segmentation Fault (core dumped)
    -bash-3.00# shutdown -r now
    Segmentation Fault (core dumped)
    I powered off the server and powered on. Now I am unable to boot, even in single user mode
    It is giving the message:
    WARNING: init(1M) exited on fatal signal 11: restarting automatically
    I agree, I was out of my mind, but please suggest a way to restore my system.
    Thanks & Regards

    What about booting into single-user mode from network or cdrom, mount your root filesystem and then add the patch using patchadd -R?
    7/M.

  • LabVIEW blocking QT signals?

    I have a LabVIEW 8.6 program that is using a DLL written in QT; the DLL listens to a TCP port for incoming messages and updates some internal data.  My LabVIEW program calls into the DLL occasionally to read the internal data.  The DLL works perfectly (i.e., receives data from the TCP port) with another QT program.  However, it does not work at all with my LabVIEW program.
    I've attached a debugger to the DLL and can see calls from LabVIEW going into it -- my function for getting the internal data is being called and I can step through it.  The code that gets the data from the TCP is never called though; it looks like the signal for incoming data on the TCP port is never triggered. 
    I know this sounds like a QT issue but the DLL works perfectly with another QT program.  Unfortunately, it fails miserably with LabVIEW.  
    One theory:
       - The event loop is not running when LabVIEW calls the DLL
          - In the QT DLL's run() function, I call socket->waitForDisconnected(). Perhaps the DLL is not processing incoming events because the event loop is not running?  If I call exec() to start the event loop, LabVIEW crashes (LabVIEW 8.6 Development System has encountered a problem and needs to close."):
       AppName: labview.exe     AppVer: 8.6.0.4001     ModName: qtcored4.dll
       ModVer: 4.5.1.0     Offset: 001af21a
          -  Perhaps when I call the DLL from another QT program, that program's event loop is allowing for the TCP signal to be seen by the DLL.  Unfortunately, kicking off the event loop in the DLL takes down LabVIEW.
    Any thoughts on how to keep signals running in the DLL when LabVIEW is the calling program?
    (Cross-posted on  http://stackoverflow.com/questions/1267804/labview-blocking-qt-signals)

    Hi,
    calling a dll in LabVIEW can be tricky. Qt is based on C++ and LabVIEW do not like C++. A dll written in C++ needs to be redefined in how calling conventions must be. There is some App. notes you should read. Please search for them here or at lavag.org.
    Regards.

  • Default Keyring's certificate is invalid, reason: unknown

    After upgrade to 2.1.2a, 2 UCS domains actually came with this error.
    Description: default Keyring's certificate is invalid, reason: unknown
    Cause: invalid-keyring-certificate
    Code: F0909
    I did the procedure
    FI-A# scope security
    FI-A/security # scope keyring default
    FI-A/security/keyring # set regenerate yes
    FI-A/security/keyring* # commit
    Which didn't help ?         
    Any advice is appreciated
    Walter.

    Hello Walter / Timo,
    The cert status is identified as " unknown " and hence the fault.
    We are tracking this issue via CSCui06351
    It will take a while to get pblished on cisco.com
    Copy of release notes
    Symptom:
    Major fault is raised for default keyring certificate status showing as unknown.
    Conditions:
    When default keyring exists, the certificate status would be evaluated as unknown. This is because the default keyring certificate is self-signed certificate. The same certificate is used for https communication. The clients trying to access UCSM using https would fail to validate the certificate because it is self-signed certificate.
    Workaround:
    Use non default keyring for https communication. It is not recommended to use self-signed certificate for https. If Customer is using default certificate (which is not recommended), it is ok to ignore this fault. It is always recommended to use certificate signed by well known/trusted CA.
    @ Walter,
    Hope you are doing good. Glad to see you on CSC :-)
    HTH
    Padma

  • WARNING: init(1M) exited on fatal signal 9: restarting automatically

    Hello,
    I have been trying to perform backup of my sun machine (with solaris 10 8/11) using Jumpstart server, but something went wrong.
    Now I am trying to boot my machine but all i get is this message :
    WARNING: init(1M) exited on fatal signal 9: restarting automatically
    over and over again.
    From another disk I set : auto-boot? = false so I can try to make fresh install from the cdrom and the message I get:
    Rebooting with command: boot cdrom
    Boot device: /pci@1e,600000/ide@d/cdrom@0,0:f File and args:
    read failed
    Evaluating:
    The file just loaded does not appear to be executable.
    Although the cdrom was fine and bootable.
    I am pretty new in this and would appreciate your help.
    Thank you
    Ana
    Edited by: 890429 on 2011.10.10 01:03

    Here is what I get when boot -m verbose.
    [ network/loopback:default starting (loopback network interface) ]
    [ system/filesystem/root:default starting (root file system mount) ]
    [ network/pfil:default starting (packet filter) ]
    [ network/tnctl:default starting (trusted networking templates) ]
    [ system/installupdates:default starting (system update installer) ]
    [ network/physical:default starting (physical network interfaces) ]
    [ milestone/name-services:default starting (name services milestone) ]
    [ system/boot-archive:default starting (check boot archive content) ]
    [ system/scheduler:default starting (default scheduling class configuration) ]
    [ system/filesystem/usr:default starting (read/write root file systems mounts) ]
    [ system/keymap:default starting (keyboard defaults) ]
    [ system/device/local:default starting (Standard Solaris device configuration.) ]
    [ system/identity:node starting (system identity (nodename)) ]
    Hostname: XXX
    [ system/filesystem/minimal:default starting (minimal file system mounts) ]
    [ system/sysevent:default starting (system event notification) ]
    [ system/resource-mgmt:default starting (Global zone resource management settings) ]
    [ system/cryptosvc:default starting (cryptographic services) ]
    [ system/name-service-cache:default starting (name service cache) ]
    [ system/manifest-import:default starting (service manifest import) ]
    [ system/identity:domain starting (system identity (domainname)) ]
    [ application/print/ppd-cache-update:default starting (ppd cache update) ]
    [ system/rmtmpfiles:default starting (remove temporary files) ]
    [ system/pkgserv:default starting (Flush package command database to disk (see pkgadm(1m)).) ]
    [ system/power:default starting (power management) ]
    [ system/coreadm:default starting (system-wide core file configuration) ]
    Oct 11 15:32:16 svc.startd[7]: svc:/system/sysevent:default: Method "/lib/svc/method/svc-syseventd start" failed with exit status 95.+
    Oct 11 15:32:16 svc.startd[7]: system/sysevent:default failed fatally: transitioned to maintenance (see 'svcs -xv' for details)+
    [ network/ipsec/ipsecalgs:default starting (IPsec algorithm initialization) ]
    [ network/ipsec/policy:default starting (IPsec policy initialization) ]
    [ milestone/network:default starting (Network milestone) ]
    [ network/initial:default starting (initial network services) ]
    Requesting System Maintenance Mode
    (See /lib/svc/share/README for more information.)
    Console login service(s) cannot run
    [ system/patchchk:default starting (Launcher for Automatic Patching services) ]
    [ system/boot-config:default starting (Boot Configuration Management) ]
    [ network/service:default starting (layered network services) ]
    [ network/iscsi/initiator:default starting ]
    Is there any specific service i should look at svcs -xv??
    Ana

  • 'cc: Internal compiler error: program got fatal signal 11' while compiling

    My program works well without the '-g' option, however, when it compiled with debug mode, it will return singal 11 fatal error.
    I tried using SunStudio 12.1/2 on my solaris 10 machine (SPARC). Is there anyone who know the reason why?
    CC -mt -g -DDEV_SUN -KPIC -DP_USE_ORBIX -I/export/home/ml3/dev_unix -I/apps/oracle/product/10.2/db_1/precomp/public -I/apps/sslcpp4.5.4.E1.solaris/include -
    I/usr/local/ssl/include -I/apps/iona/asp/6.3/include -I/export/home/ml3/dev_unix/ORDER/src/force_v32 -I/export/home/ml3/dev_unix/SYNAPSE/src/synapse_v1/obs -
    I/export/home/ml3/dev_unix/SYNAPSE/src/synapse_v1/common -I/export/home/ml3/dev_unix/SYNAPSE/src/synapse_v1/security -
    I/export/home/eptprod1/Synapse/module/lib/corbautil/cxx/gsp -I/export/home/eptprod1/Synapse/module/lib/corbautil/cxx/import_export -
    I/export/home/eptprod1/Synapse/module/lib/corbautil/cxx/PolicyListParser -I/export/home/eptprod1/Synapse/module/lib/corbautil/cxx/PoaUtility -
    I/export/home/eptprod1/Synapse/module/lib/corbautil/cxx/portability -c /export/home/ml3/dev_unix/EPT/src/orc/OrcTimerTask.cpp -o
    /export/home/ml3/dev_unix/EPT/lib/orc/OrcTimerTask.o
    db_exec_sql /export/home/ml3/dev_unix/EPT/database/table/T_ALLOWED_ORDER_TYPE.sql
    SQL*Plus: Release 10.2.0.1.0 - Production on Tue Nov 30 09:58:09 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
    With the Partitioning, Real Application Clusters, Data Mining and Real Application Testing options
    SQL> SQL> SQL> SQL> SQL> SQL> SQL> SQL> SQL> 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 SQL> 1 DECLARE
    2
    3 nb number(10) := 0;
    4
    5 BEGIN
    6
    7 SELECT count(*)
    8 INTO nb
    9 FROM user_tables
    10 WHERE table_name = 'ALLOWED_ORDER_TYPE';
    11
    12 IF nb = 1 THEN
    13 EXECUTE IMMEDIATE 'DROP TABLE ALLOWED_ORDER_TYPE';
    14 END IF;
    15
    16* END;
    PL/SQL procedure successfully completed.
    SQL> SQL> 2 3 4 5 6
    Table created.
    SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
    With the Partitioning, Real Application Clusters, Data Mining and Real Application Testing options
    db_exec_sql /export/home/ml3/dev_unix/EPT/database/index/IC_ALLOWED_ORDER_TYPE.sql
    SQL*Plus: Release 10.2.0.1.0 - Production on Tue Nov 30 09:58:09 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
    With the Partitioning, Real Application Clusters, Data Mining and Real Application Testing options
    SQL> SQL> SQL> SQL> SQL> SQL> SQL> SQL> SQL> SQL> 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 SQL> 1 DECLARE
    2
    3 nb number(10) := 0;
    4
    5 BEGIN
    6
    7 SELECT count(*)
    8 INTO nb
    9 FROM user_indexes
    10 WHERE table_name = 'ALLOWED_ORDER_TYPE'
    11 AND index_name = 'IC_ALLOWED_ORDER_TYPE';
    12
    13 IF nb = 1 THEN
    14 EXECUTE IMMEDIATE 'DROP INDEX IC_ALLOWED_ORDER_TYPE';
    15 END IF;
    16
    17* END;
    PL/SQL procedure successfully completed.
    SQL> SQL> 2 3 4 5 6
    Index created.
    SQL> SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
    With the Partitioning, Real Application Clusters, Data Mining and Real Application Testing options
    db_table_header ALLOWED_ORDER_TYPE > /export/home/ml3/dev_unix/EPT/database/inc/T_ALLOWED_ORDER_TYPE.h
    db_table_ctl ALLOWED_ORDER_TYPE > /export/home/ml3/dev_unix/EPT/database/ctl/ALLOWED_ORDER_TYPE.ctl
    db_exec_sql /export/home/ml3/dev_unix/EPT/database/table/T_BASKET_DEAL_SUBSCRIBE.sql
    SQL*Plus: Release 10.2.0.1.0 - Production on Tue Nov 30 09:58:10 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
    With the Partitioning, Real Application Clusters, Data Mining and Real Application Testing options
    SQL> SQL> SQL> SQL> SQL> SQL> SQL> SQL> SQL> SQL> 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 SQL> 1 DECLARE
    2
    3 nb number(10) := 0;
    4
    5 BEGIN
    6
    7 SELECT count(*)
    8 INTO nb
    9 FROM user_tables
    10 WHERE table_name = 'BASKET_DEAL_SUBSCRIBE';
    11
    12 IF nb = 1 THEN
    13 EXECUTE IMMEDIATE 'DROP TABLE BASKET_DEAL_SUBSCRIBE';
    14 END IF;
    15
    16* END;
    PL/SQL procedure successfully completed.
    SQL> SQL> 2 3 4 5
    Table created.
    SQL> SQL> SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
    With the Partitioning, Real Application Clusters, Data Mining and Real Application Testing options
    db_exec_sql /export/home/ml3/dev_unix/EPT/database/index/IC_BASKET_DEAL_SUBSCRIBE.sql
    SQL*Plus: Release 10.2.0.1.0 - Production on Tue Nov 30 09:58:10 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
    With the Partitioning, Real Application Clusters, Data Mining and Real Application Testing options
    SQL> SQL> SQL> SQL> SQL> SQL> SQL> SQL> SQL> SQL> 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 SQL> 1 DECLARE
    2
    3 nb number(10) := 0;
    4
    5 BEGIN
    6
    7 SELECT count(*)
    8 INTO nb
    9 FROM user_indexes
    10 WHERE table_name = 'BASKET_DEAL_SUBSCRIBE'
    11 AND index_name = 'IC_BASKET_DEAL_SUBSCRIBE';
    12
    13 IF nb = 1 THEN
    14 EXECUTE IMMEDIATE 'DROP INDEX IC_BASKET_DEAL_SUBSCRIBE';
    15 END IF;
    16
    17* END;
    PL/SQL procedure successfully completed.
    SQL> SQL> 2 3 4 5
    Index created.
    SQL> SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
    With the Partitioning, Real Application Clusters, Data Mining and Real Application Testing options
    db_table_header BASKET_DEAL_SUBSCRIBE > /export/home/ml3/dev_unix/EPT/database/inc/T_BASKET_DEAL_SUBSCRIBE.h
    >> Signal 11:
    while processing /export/home/ml3/dev_unix/EPT/src/orc/OrcTimerTask.cpp at line 0.
    make: *** [export/home/ml3/dev_unix/EPT/lib/orc/OrcTimerTask.o] Error 2
    make: *** Waiting for unfinished jobs....
    db_table_ctl BASKET_DEAL_SUBSCRIBE > /export/home/ml3/dev_unix/EPT/database/ctl/BASKET_DEAL_SUBSCRIBE.ctl
    **** Error compiling EPT ****
    ml3@110110:/apps/export/home/ml3/dev_unix>

    Sorry to interrupt again,
    Seems that it is related to the <algorithm> STL template, isn't it?
    CC -mt -g -DDEV_SUN -KPIC -DP_USE_ORBIX -I/export/home/ml3/dev_unix -I/apps/oracle/product/10.2/db_1/precomp/public -I/apps/sslcpp4.5.4.E1.solaris/include -I/usr/local/ssl/include -I/apps/iona/asp/6.3/include -I/export/home/ml3/dev_unix/ORDER/src/force_v32 -I/export/home/ml3/dev_unix/SYNAPSE/src/synapse_v1/obs -I/export/home/ml3/dev_unix/SYNAPSE/src/synapse_v1/common -I/export/home/ml3/dev_unix/SYNAPSE/src/synapse_v1/security -I/export/home/eptprod1/Synapse/module/lib/corbautil/cxx/gsp -I/export/home/eptprod1/Synapse/module/lib/corbautil/cxx/import_export -I/export/home/eptprod1/Synapse/module/lib/corbautil/cxx/PolicyListParser -I/export/home/eptprod1/Synapse/module/lib/corbautil/cxx/PoaUtility -I/export/home/eptprod1/Synapse/module/lib/corbautil/cxx/portability -c /export/home/ml3/dev_unix/EPT/src/orc/OrcMaster9XXX.cpp -o /export/home/ml3/dev_unix/EPT/lib/orc/OrcMaster9XXX.o
    Signal 11:
    while processing /opt/solstudio12.2/prod/include/CC/Cstd/algorithm.cc at line 0.
    make: *** [export/home/ml3/dev_unix/EPT/lib/orc/OrcMaster9XXX.o] Error 2
    **** Error compiling EPT ****
    ml3@hkgss1101145:/apps/export/home/ml3/dev_unix>

  • Database got shutdown reason unknown

    Hi,
    My database got shutdown. We are unable to know the reason behind this.
    Its 10g database on AIX 5.3 server.
    Below is the entry from alert log.
    Thread 1 advanced to log sequence 264605 (LGWR switch)
    Current log# 5 seq# 264605 mem# 0: /oracle/redolog/neonprd/redo05a.log
    Current log# 5 seq# 264605 mem# 1: /oracle/redolog02/neonprd/redo05b.log
    Mon Sep 10 14:04:01 2012
    Immediate Kill Session#: 1870, Serial#: 17917
    Immediate Kill Session: sess: 7000005835afb08 OS pid: 5845450
    Mon Sep 10 14:04:01 2012
    Process OS id : 5845450 alive after kill
    Errors in file
    Mon Sep 10 14:04:21 2012
    Immediate Kill Session#: 1998, Serial#: 27337
    Immediate Kill Session: sess: 7000005875c6cc0 OS pid: 6263044
    Mon Sep 10 14:04:21 2012
    Process OS id : 6263044 alive after kill
    Errors in file
    Mon Sep 10 14:04:32 2012
    alter database commit to switchover to primary
    Mon Sep 10 14:04:32 2012
    ALTER DATABASE SWITCHOVER TO PRIMARY (neonprd)
    Mon Sep 10 14:04:32 2012
    ORA-16109 signalled during: alter database commit to switchover to primary...
    Mon Sep 10 14:04:32 2012
    ALTER SYSTEM SET log_archive_dest_state_2='enable' SCOPE=BOTH;
    Starting background process EMN0
    Shutting down instance: further logons disabled
    EMN0 started with pid=159, OS id=5444040
    Mon Sep 10 14:04:37 2012
    Completed checkpoint up to RBA [0x4099d.2.10], SCN: 43879290652
    Mon Sep 10 14:04:37 2012
    Stopping background process CJQ0
    Mon Sep 10 14:04:37 2012
    Stopping background process QMNC
    Mon Sep 10 14:04:38 2012
    Stopping background process MMNL
    Mon Sep 10 14:04:39 2012
    Stopping background process MMON
    Mon Sep 10 14:04:40 2012
    Shutting down instance (immediate)
    License high water mark = 399
    Mon Sep 10 14:04:40 2012
    Stopping Job queue slave processes, flags = 7
    Mon Sep 10 14:04:40 2012
    Process OS id : 7172580 alive after kill
    Errors in file /oracle/admin/neonprd/udump/neonprd_ora_6672700.trc
    Mon Sep 10 14:04:44 2012
    Waiting for Job queue slaves to complete
    Mon Sep 10 14:04:44 2012
    Job queue slave processes stopped
    Mon Sep 10 14:05:49 2012
    Starting ORACLE instance (normal)
    Mon Sep 10 14:06:14 2012
    Starting ORACLE instance (normal)
    Mon Sep 10 14:06:21 2012
    Starting ORACLE instance (normal)
    Mon Sep 10 14:07:02 2012
    Starting ORACLE instance (normal)
    Mon Sep 10 14:07:46 2012
    Starting ORACLE instance (normal)
    Mon Sep 10 14:08:46 2012
    Starting ORACLE instance (normal)
    Mon Sep 10 14:09:23 2012
    Starting ORACLE instance (normal)
    Mon Sep 10 14:10:01 2012
    Starting ORACLE instance (normal)
    Mon Sep 10 14:10:07 2012
    Incremental checkpoint up to RBA [0x4099d.62afd.0], current log tail at RBA [0x4099d.62b0c.0]
    Mon Sep 10 14:15:27 2012
    Shutting down instance
    License high water mark = 399
    Instance terminated by USER, pid = 7000574
    Mon Sep 10 14:15:49 2012
    Starting ORACLE instance (normal)
    sskgpgetexecname failed to get name
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Picked latch-free SCN scheme 3
    Autotune of undo retention is turned on.
    IMODE=BR
    ILAT =242
    LICENSE_MAX_USERS = 0
    SYS auditing is enabled
    ksdpec: called for event 13740 prior to event group initialization
    Starting up ORACLE RDBMS Version: 10.2.0.4.0.
    System parameters with non-default values:
    processes = 2000
    sessions = 2205
    sga_max_size = 23622320128
    __shared_pool_size = 3674210304
    shared_pool_size = 3674210304
    __large_pool_size = 16777216
    large_pool_size = 16777216
    __java_pool_size = 117440512
    java_pool_size = 50331648
    __streams_pool_size = 16777216
    streams_pool_size = 16777216
    nls_date_format = MM-DD-YYYY HH24:MI:SS
    nls_length_semantics = BYTE
    filesystemio_options = setall
    resource_manager_plan =
    sga_target = 22548578304
    control_files = /oracle/data/neonprd/control01.ctl, /oracle/data/neonprd/control02.ctl, /oracle/data/neonprd/control03.ctl
    db_block_size = 8192
    __db_cache_size = 18656264192
    db_cache_size = 8002732032
    db_writer_processes = 16
    compatible = 10.2.0.3.0
    log_archive_dest_1 = location=use_db_recovery_file_dest
    log_archive_dest_2 = service=standby reopen=120 max_connections=3
    log_archive_dest_state_1 = ENABLE
    log_archive_dest_state_2 = enable
    log_archive_max_processes= 10
    log_archive_min_succeed_dest= 1
    standby_archive_dest =
    log_archive_trace = 0
    fal_client = PRIMARY
    fal_server = STANDBY
    log_buffer = 63009792
    archive_lag_target = 0
    db_files = 200
    db_file_multiblock_read_count= 16
    db_recovery_file_dest = /oracle/flash_recovery
    db_recovery_file_dest_size= 1181116006400
    standby_file_management = AUTO
    fast_start_mttr_target = 300
    log_checkpoints_to_alert = TRUE
    undo_management = AUTO
    undo_tablespace = UNDOTBS1
    undo_retention = 3600
    remote_login_passwordfile= EXCLUSIVE
    audit_sys_operations = TRUE
    db_domain = in.startv.com
    service_names = neonprd.in.startv.com
    shared_servers = 0
    job_queue_processes = 10
    cursor_sharing = EXACT
    parallel_max_servers = 0
    background_dump_dest = /oracle/admin/neonprd/bdump
    user_dump_dest = /oracle/admin/neonprd/udump
    core_dump_dest = /oracle/admin/neonprd/cdump
    audit_file_dest = /oracle/admin/neonprd/adump
    audit_trail = NONE
    db_name = neonprd
    open_cursors = 1500
    parallel_adaptive_multi_user= TRUE
    optimizer_index_cost_adj = 25
    optimizer_index_caching = 90
    query_rewrite_enabled = TRUE
    pga_aggregate_target = 6442450944
    skip_unusable_indexes = TRUE
    allowlevel_without_connect_by= TRUE
    aq_tm_processes = 1
    awrflush_threshold_metrics= TRUE
    PMON started with pid=2, OS id=1204390
    PSP0 started with pid=3, OS id=966732
    MMAN started with pid=4, OS id=1003604
    DBW0 started with pid=5, OS id=946294
    DBW1 started with pid=6, OS id=909508
    DBW2 started with pid=7, OS id=7000332
    DBW3 started with pid=8, OS id=897104
    DBW4 started with pid=9, OS id=7233880
    DBW5 started with pid=10, OS id=5828952
    DBW6 started with pid=11, OS id=7213314
    DBW7 started with pid=12, OS id=7139790
    DBW8 started with pid=13, OS id=6844750
    DBW9 started with pid=14, OS id=6648146
    DBWa started with pid=15, OS id=851976
    DBWb started with pid=16, OS id=872484
    DBWc started with pid=17, OS id=815254
    DBWd started with pid=18, OS id=790652
    DBWe started with pid=19, OS id=774152
    DBWf started with pid=20, OS id=745636
    LGWR started with pid=21, OS id=573668
    CKPT started with pid=22, OS id=1171514
    SMON started with pid=23, OS id=553024
    RECO started with pid=24, OS id=1159352
    CJQ0 started with pid=25, OS id=6639948
    MMON started with pid=26, OS id=6394246
    MMNL started with pid=27, OS id=1028254
    Mon Sep 10 14:15:51 2012
    ALTER DATABASE MOUNT
    Mon Sep 10 14:15:55 2012
    Setting recovery target incarnation to 1
    Mon Sep 10 14:15:55 2012
    Successful mount of redo thread 1, with mount id 863646487
    Mon Sep 10 14:15:55 2012
    Database mounted in Exclusive Mode
    Completed: ALTER DATABASE MOUNT
    Mon Sep 10 14:15:55 2012
    ALTER DATABASE OPEN
    Mon Sep 10 14:15:56 2012
    Beginning crash recovery of 1 threads
    parallel recovery setup failed: using serial mode
    Mon Sep 10 14:15:56 2012
    Started redo scan
    Mon Sep 10 14:15:56 2012
    Completed redo scan
    0 redo blocks read, 0 data blocks need recovery
    Mon Sep 10 14:15:56 2012
    Started redo application at
    Thread 1: logseq 264605, block 404238, scn 43879394962
    Mon Sep 10 14:15:56 2012
    Recovery of Online Redo Log: Thread 1 Group 5 Seq 264605 Reading mem 0
    Mem# 0: /oracle/redolog/neonprd/redo05a.log
    Mem# 1: /oracle/redolog02/neonprd/redo05b.log
    Mon Sep 10 14:15:56 2012
    Completed redo application
    Mon Sep 10 14:15:56 2012
    Completed crash recovery at
    Thread 1: logseq 264605, block 404238, scn 43879414963
    0 data blocks read, 0 data blocks written, 0 redo blocks read
    Mon Sep 10 14:15:56 2012
    LGWR: STARTING ARCH PROCESSES
    ARC0 started with pid=29, OS id=1200370
    ARC1 started with pid=30, OS id=6341016
    ARC2 started with pid=31, OS id=6271472
    ARC3 started with pid=32, OS id=1130568
    ARC4 started with pid=33, OS id=6234458
    ARC5 started with pid=34, OS id=1179696
    ARC6 started with pid=35, OS id=1106070
    ARC7 started with pid=36, OS id=5890556
    ARC8 started with pid=37, OS id=1089544
    Mon Sep 10 14:15:57 2012
    ARC0: Archival started
    ARC1: Archival started
    ARC2: Archival started
    ARC3: Archival started
    ARC4: Archival started
    ARC5: Archival started
    ARC6: Archival started
    ARC7: Archival started
    ARC9 started with pid=38, OS id=1036378
    Mon Sep 10 14:15:57 2012
    ARC8: Archival started
    ARC9: Archival started
    LGWR: STARTING ARCH PROCESSES COMPLETE
    Mon Sep 10 14:15:57 2012
    Thread 1 advanced to log sequence 264606 (thread open)
    Thread 1 opened at log sequence 264606
    Current log# 6 seq# 264606 mem# 0: /oracle/redolog/neonprd/redo06a.log
    Current log# 6 seq# 264606 mem# 1: /oracle/redolog02/neonprd/redo06b.log
    Successful open of redo thread 1
    Mon Sep 10 14:15:57 2012
    ARC0: Becoming the 'no FAL' ARCH
    ARC0: Becoming the 'no SRL' ARCH
    Mon Sep 10 14:15:57 2012
    ARC3: Becoming the heartbeat ARCH
    Mon Sep 10 14:15:57 2012
    SMON: enabling cache recovery
    Mon Sep 10 14:15:57 2012
    db_recovery_file_dest_size of 1126400 MB is 4.99% used. This is a
    user-specified limit on the amount of space that will be used by this
    database for recovery-related files, and does not reflect the amount of
    space available in the underlying filesystem or ASM diskgroup.
    Mon Sep 10 14:15:58 2012
    Successfully onlined Undo Tablespace 1.
    Mon Sep 10 14:15:58 2012
    SMON: enabling tx recovery
    Mon Sep 10 14:15:58 2012
    Database Characterset is WE8MSWIN1252
    Opening with internal Resource Manager plan
    where NUMA PG = 1, CPUs = 28
    replication_dependency_tracking turned off (no async multimaster replication found)
    Mon Sep 10 14:16:00 2012
    Incremental checkpoint up to RBA [0x4099e.3.0], current log tail at RBA [0x4099e.a3.0]
    Mon Sep 10 14:16:00 2012
    Starting background process QMNC
    QMNC started with pid=40, OS id=5837066
    Mon Sep 10 14:16:02 2012
    Completed: ALTER DATABASE OPEN
    Mon Sep 10 14:18:57 2012
    Immediate Kill Session#: 2016, Serial#: 77
    Immediate Kill Session: sess: 70000058f5d0698 OS pid: 6582596
    Mon Sep 10 14:18:57 2012
    Process OS id : 6582596 alive after kill
    Errors in file
    Mon Sep 10 14:24:30 2012
    Beginning log switch checkpoint up to RBA [0x4099f.2.10], SCN: 43879588218
    Mon Sep 10 14:24:30 2012
    Thread 1 advanced to log sequence 264607 (LGWR switch)
    Current log# 1 seq# 264607 mem# 0: /oracle/redolog/neonprd/redo01a.log
    Current log# 1 seq# 264607 mem# 1: /oracle/redolog02/neonprd/redo01b.log
    Mon Sep 10 14:29:33 2012
    Completed checkpoint up to RBA [0x4099f.2.10], SCN: 43879588218
    Mon Sep 10 14:32:01 2012
    Beginning log switch checkpoint up to RBA [0x409a0.2.10], SCN: 43879769830
    Mon Sep 10 14:32:01 2012
    Thread 1 advanced to log sequence 264608 (LGWR switch)
    Current log# 2 seq# 264608 mem# 0: /oracle/redolog/neonprd/redo02a.log
    Current log# 2 seq# 264608 mem# 1: /oracle/redolog02/neonprd/redo02b.log

    Atiq wrote:
    How can i get the os user, db user, ip address of machine from where shutdown was issued???I can't say that I ever actually did this, but DBMS_LOGMNR might provide clues.
    The list of possible culprits is limited to those can login AS SYSDBA or SYSOPER.
    SYSDBA logins are audited for V10+ by default

  • FPGA CRIO LabView - Why No Signal or Low signal?

    I'm programming LabView 8.2/RealTime 8.2 on a CRIO-9002 equipt with a 9102 chassis. I have a some 4-20mA modules, +-10v modules and last but MOST IMPORTANTLY a 9233 +-5v module.
    I've programmed the FPGA and realtime and have been able to acquire and scale appropriatly for all modules except the 9233. The 9233 is hooked up to a VibraMetrics 7002 accerlometer. (http://www.vibrametrics.com/downloads/specsheets/M​odel%207002.pdf)
    When run and an acceleration is applied I only see very low voltage on my display. Why is my 9233 is being unresponsive?
    Test run at 3.5 Gvms of acceleration: (please excuse the mess)
    Once again, the power spectrum should not be showing levels so low.
    Thanks for your help in advance,
    Craig

    Have you checked the signal level from the accelerometer with any other measurement devices to verify that the 9233 is measuring incorrectly?  Is the voltage/current excitation for the accelerometer correct?  I am assuming you are using the binary to nominal VI for converting the binary data to the real voltage.  Make sure you are using the correct module type for the conversion. 
    I am attempting to use the binary to nominal VI on the values I see on your front panel, but things are not adding up.  I used the 4th LSB Weight and Offset (656368 and -6548405)and the 4th 9233 unscaled Binary value (-7261) and converted it with the Binary to Nominal VI for the 9233 and got 0.00178252 for a nominal value while your VI appears to display 0.0067847.  I'm not sure what you are doing different than me.
    The low valued power spectrum makes sense because the analog input values are low.  If we fix the analog input issue, the spectrum should take care of itself.
    Without seeing your code or setup, these suggestions are obviously hypothetical.  Your screenshots show the FPGA code ok, but we have no idea how you are handling data on the host side.  In the future I would avoid embedding giant screen shots in your post, attachments are just fine.  Embedded screen shots are more effective if they only contain a small snippet of code.
    Cheers,
    Spex
    National Instruments
    To the pessimist, the glass is half empty; to the optimist, the glass is half full; to the engineer, the glass is twice as big as it needs to be...

  • Fatal Run-Time - Unknown Fault - on any CVI program close

    I have been trying to track down a few what seem like phantom Fatal Run Time Errors on my program closes.
    I am running LabWindows/CVI 2010 Full 10.0.1 (419)
    I originally posted here -> http://forums.ni.com/t5/LabWindows-CVI/EasyTab-ConvertFromCanvas-memory-leak/m-p/3084769#M69465
    As I thought this was related to tabs, where my resource tracker shows 'unclosed' resources.
    Now I am opening a different program and have found that even though I put my return 0; at the top of my main loop, I still get a fatal run time error.
    The error is exactly:
    FATAL RUN-TIMe ERROR
    Unknown source position, thread id 0x00001BB4 
    The program has caused a 'Unknown' fault at 0x748A4F11
    This occurs every time I run my program in the CVI IDE.
    There are no allocated resources in my resources window.
    Searching for either address in my map file brings no results.
    Thanks,
    Nick

    Hi ngay528,
    I have attached a link below to one of our discussion forums that walks through using the Resource Tracking feature of LabWindows/CVI. Again, sometimes this particular error is caused by leaving resources open at the end of an application, so this feature can help us identify those resources if that is the case. Please follow the steps listed in the solution of the thread (message number 4, marked in green). 
    FATAL RUN-TIME ERROR: Unknown source position, thread id 0x00000EB4: The program has caused a 'General Protection' fault at 0x00459B9D:
    http://forums.ni.com/t5/LabWindows-CVI/FATAL-RUN-TIME-ERROR-Unknown-source-position-thread-id/m-p/16...
    Thomas N.
    Applications Engineer
    National Instruments

  • How to power a motor using labview DAQ output signal

    The power from labview is not enough to move a decent-sized motor (works with tiny one). Is there any electrical component/device that I can use to sort of increase it (something in between output from labview and the motor)?
    Thanks

    LabView is a software and does not supply any physical signals. To generate physical signals you need an interface board, NI has plenty of them which can be controlled via LabView. Anyhow, as you mentioned, digital i/o interfaces can handle currents in the mA range only. I think the best way to control motors via LabView and an interface board is using an additional relay driver board. Since relay contacts only switch power and do not supply any power you will need an external power supply matching the voltage and current specs of the motor.

  • EM Jobs Service is down (fatal).  Reason - "Reason for delay could not be determined"

    Hi all -
    I'm having a problem with my em jobs service.  It's listed as down.  Severity is "Fatal".   For the incident creation DATE it has the following:
    "Reason for delay could not be established."
    Note that it's the DATE column where it ways that the reason could not be established.    Under "message" it has Dec 28, 2013 8:46:29 PM. 
    Target Name
    Target Type
    Severity
    Message
    Incident Creation Date
    Incident Last updated Date
    Escalation Level
    EM Jobs Service
    EM Service
    Dec 28, 2013 8:46:29 PM
    Reason for delay could not be established.
    Jan 27, 2014 7:48:44 PM
    None
    Does anyone have any clue as to why this is happening and/or how to fix it?
    Thanks,
    Tom

    Hi,
    Follow the below steps
    1. Click on Repository Database Target in Cloud Control
    2. Navigate to : Administration -> "Oracle Scheduler" -> Home -> click on "Oracle Scheduler" it will return, "Scheduler Jobs"
    3. Check that the scheduled jobs are running at their correct schedules.  Check if the "EM_JOBS_STEP_SCHED" job is disabled.
    4. Select "EM_JOBS_STEP_SCHED" and click on "Edit job Definition" ensure that the job status is "enabled". Then click apply.
    5. Check the "EM Jobs Service" status , it should now be shown as UP.
    Also
    1. Login to 12c Console, Targets --> All Targets --> EM Jobs Service
    2, click on Monitoring Configuration tab
    3. click on System Configuration
    In the Availability Definition screen, under Key Component column, check all the check boxes
    4. Similarly, in the System Configuration screen, under Key Component column, check all the check boxes
    Wait for 5 minutes and then check the status of the target again.
    Regards,
    Rahul

  • Labview driver for signal generator can not find DLL

    The labview driver "age82xx.zip" I downloaded from NI website can not find DLL "age82xx_32.dll". There is no this dll file in the zip file. Please help me. The labview version is 7.0. The instrument is Agilent E8254A. Thanks!

    On the download page, there is a link under "Require Third-Party Installation(s)". This is explained at the top of NI's page. Clicking on the link will take you to Agilent's web site where you will have to select the 'Signal Generators' link to get the E82xxA driver.

  • Ld: fatal: file *.a unknown file type

    Hello
    I am using the Sun Forte 7 C compiler and have a strange linking error:
    Towards the end of the build script, the following compiler directive attempts to execute:
    -L/somepath -Bstatic -lnetsnmpmibs -lnetsnmpagent -lnetsnmphelpers
    I get the following error message:
    ld: fatal: file /emc/saffas/local/lib/libnetsnmpmibs.a: unknown file type
    ld: fatal: file /emc/saffas/local/lib/libnetsnmpagent.a: unknown file type
    ld: fatal: file /emc/saffas/local/lib/libnetsnmphelpers.a: unknown file type
    ld: fatal: file /emc/saffas/local/lib/libnetsnmp.a: unknown file type
    I looked at all of the compiler options as well as the READMEs for this compiler and have not been able to solve this problem. I thought this was the standard way to link static libraries. I added the -Bstatic option just in case and that didn't work.
    Any ideas on what I'm missing?
    Thank you,
    dedham_ma_man

    The option -lnetsnmpmibs (for example) tells cc to look for a library called netsnmpmibs. It finds netsnmpmibs.a, which it expects to be an archive library for the same computer architecture.
    The file is evidently something else. Run the "file" command to find out what the file is:
    % file /emc/saffas/local/lib/libnetsnmpmibs.a
    It should say that the file is an "ar archive". If not, that is your problem. Somehow the expected archives were overwritten or replaced by something else.
    You don't say what architecture you are using: 32-bit sparc, 64-bit sparc, or x86. Whatever you are compiling for, the components of the library must be compatible.
    Run the command
    % ar -t <archive>
    to get a list of the components of the archive. Let's suppose one of them is foo.o.
    Extract foo.o using the command
    % ar -x <archive> foo.o
    Run the command
    % file foo.o
    to find out whether the file is of the correct architecture. If not, you are looking in the wrong place for the library, or no library of the correct architecture is available.

Maybe you are looking for

  • Problemas com entrega do iPad

    Sei que aqui não é o lugar certo para escrever esse tipo de reclamação. Mas só cheguei a esse ponto pelo fato de que ninguém resolve nada. Desde que comprei um iPhone me tornei fã da Apple. Comprei um macbook após isso. Lembrando que todos comprei em

  • Root.sh fails for 11gR2 Grid Infrastructure installation on AIX 6.1

    Hello all, root.sh fails with the errors below. SR with Oracle opened. Will post the resolution when it is available. Any insights in the meantime? Thank you! System information: OS: AIX 6.1 Runcluvfy.sh reported no issue Permissions on the raw devic

  • My Macbok Air keeps randomly restarting.

    My Macbok Air keeps randomly restarting. Please see error code: Anonymous UUID:       8CD0B880-AF43-EBAB-7561-4FF5BE3F73F9 Fri Dec 12 10:39:06 2014 *** Panic Report *** panic(cpu 2 caller 0xffffff800721e80a): Kernel trap at 0xffffff7f87e5a376, type 1

  • My folders disappear when I sync my iPad with iTunes

    I have about 290 apps on my iPad - too many for the 11 screens allowed.  I organized them into folders in iTunes (took me a couple of hours) so that I could see all my apps and find them more easily.  When I synced my iPad with iTunes, they all disap

  • Need Adobe Reader help

    I can't find a reliable adobe reader pdf download. After spending hours screwing with bogus "free" downloads that put tons of cookies and unwanted programs on, I'm happy to buy something but am even having a hard time getting that done. Need help. Th