Labview examples for Newport rotation stage Model URS50BBC

Hi there,
I am currently wanting to control the motion of the motorised mount using Labview, but I dont have examples, Can you ,possibly, help me please?
The mount Model is: Newport rotation stage Model URS50BBC.
Thank you ,
Maab

Hi CasiL,
Thank you for this.
I doenloaded them, and it is Ok now, however , the example need COM adress ,when I put 1 , it says : failed in connection and somthing about VISA identification..
I dont know how can I found VISA or code library,I will attach the error box.
Thank you very much,
Maab
Attachments:
error labview capture.JPG ‏256 KB

Similar Messages

Creating Labview VI for Newport's ESP6000 motion controller

I am working on creating a Labview VI for ESP6000 motion controller (Newport). I want to move to stages independently one by one and acquire synchronized data from the analog input of the controller during the motion of the one of the stages. If there is anyone working with Labview on ESP6000, I will be glad to dicsuss common issues, obstacles, sub vi's etc.
ceyhun

We built a test station for an automotive component with the ESP6000. The biggest limitation we ran into was the 1000-sample buffer capacity of the analog input. We were hoping that it would behave like the NI DAQ boards. It was not our choice to use the ESP6000. The customer supplied it. The whole setup cost in excess of $9,000. The NI equivalent would be about 2/3 that much. Anyway, Newport supplies a driver that does work. It takes some work to get everything going properly though.
Remember that Alliance Members are here to help. We do this stuff every day.
Daniel L. Press
PrimeTest Corp.
www.primetest.com

LabVIEW drivers for Newport 2010A tunable diode laser?

My group aquired a Newport 2010A tunable diode laser and failed to receive the labview drivers for remote control operation. Does anyone have this software?

All,
Here is a link to a clean photocopy of the EOSI 2010 laser manual:
https://wiki.brown.edu/confluence/download/attachments/29406/Diode+Laser+Manual.pdf?version=1
You can also Google it using "EOSI 2010 laser" and find the maual in the link that says: "EOSI tunable laser diode systems and accessories are guaranteed
for a period .... the 2010 laser diode. The first
method is more sensitive but requires both .." Good hunting.
Sincerely,
John Zehnpfennig
U-Michigan Optics Lab

Labview example for data capture using 5102 scope card

How can I program a Labview Vi to control, and capture a waveform using the 5102 scope card. I need to be able to set it up to continually capture a waveform (Channel 1 and Channel 2) when triggered on a rising edge of channel 1 and then store the data on disk automatically, then wait for the next trigger.
Any help or tips as to how I could do it would be helpful.
Thanks
Allan

Allan,
Please find the attached zip file that has some useful LabVIEW examples with scope 5102
Zvezdana S.
National Instruments
Attachments:
scope.zip ‏181 KB

Any labview example for resonator parameter measurement?

Hellow!
I am doing the measurement of the resonator parameter(like C0,L,C1,R) using network analyzer, are there anybody has some experience about it, are there any example code? thanks a lot!
Mike

Mike,
Which network analyzer are you using. You may be able to find some LabVIEW drivers for it at the following link:
National Instruments Instrument Driver Network
You may also check the other thread you started and the responses from JL Chew.
Network Analyzer
Hope this helps!
Andy F.
National Instruments

LabVIEW Example For Younger Crowd.

Hello,
I am giving a presentation for a group of younger kids this friday, June 29th and I need a LabVIEW example that I can show them and talk about. So I need something that younger kids, ages 5-13 can understand. Its ok if its too boring for the older kids and too confusing for the younger and vise versa. I can adjust how I talk to compensate. So far I have a bouncing cube demo, but that is not complex enough to talk about for a length of time. I would also like the example to relate to engineering as much as possible and is not just a game like Tic Tac Toe. Thank you for your suggestions.
Michael Boyd

It is always good to do something where the students can be involved during execution. For example you could fill two parallel tanks with random numbers and take bets which one fills first. (learn about loops, shift registers, comparison (see if it is full), decision, etc.)
You might also do some real DAQ with the soundcard. Again do a "race" where the two tanks fill according to sound volume. Do a FFT and tie one to the high frequency (girls!) and one to a lower frequency (boys!) and let the class scream their heart out to advance each tank/slider.
Other soundcard things would be a simple voice scrambler or changer (doesn't work that well without RT). SImply record some sentences, do some digital signal processing, then play it back. See how the sound changes depending on settings (double/half the frequency, low-pass, hi-pass, etc.)
If you have more time, you could also e.g. test batteries and see what brand is best. See:
http://forums.ni.com/ni/board/message?board.id=170&message.id=107032#M107032
LabVIEW Champion . Do more with less code and in less time .

Where can I get LabView examples for PXI-6551 or 6552? Thanks

We are thinking of buying a 655x and wanted to see sample code to get an idea of its capabilities.
Does anyone know where I could find LabView examples?
Any other information related to the PXI-655x would be appreciated too!
Thanks,
-KP

Hi KP,
Thanks for your interest in the NI 655X. These products use a brand new driver, NI-HSDIO, which is based on DAQmx. We are still working on a more bandwidth-efficient web installer for the driver, but for now I have placed it on our temporary ftp site. You can find it at ftp://ftp.ni.com/incoming/HSDIO.zip
This driver contains a full set of example programs for both LabVIEW and CVI, and the help files are a great way to learn about the physical capability of the board.
Do you have any other questions about these products?

Labview examples for an "http transponder"

I’m looking for Labview examples (LabView 5.1 or 6i) to make an “http transponder” between an intranet and internet networks.
I’ve a “system” configured with a TCP-IP address in the local intranet network, it isn’t a PC but its behaviour is like a local “web server” without external access, so it is possible to send it URLs from an every PC (with internet explorer) inside the local network, to get the “system” status.
I’d like to monitor that “system” in the internet network also, so I need to make an “http transponder” on a PC connected in the local intranet network, but with external access permission.
So it can be possible to s
end URLs to the transponder by a PC in the internet network, and the transponder can redirect them to the “system” in the intranet area.
The “system” can send his status along the inverse route.
Thank you in advance.
Natalino.

Thank you, it would be useful, but I haven't an "Internet Toolkit" at the moment.
I made some attempts with low level Tcp-ip functions, and I obtained good results by loading static html pages, bad ones by loading dynamic pages.
I think is an integration problem (timeout, waiting times, etc..), so some "previously tested" examples with Tcp-ip function would be very useful.

Looking for Labview Examples for At-MIO-16DE-10 and AMUX-64T

looking for examples to record:
Load vs strain and temperature using these two.
Also a quick guide to how to get started. I hav Labview 6i and the card and board. No experience yet.

Greetings,
There are a variety of documents on our website that contain information about using the AMUX-64T with an MIO device. There are also example programs that show how to acquire readings using an MIO device with the AMUX-64T. I have linked to some of better documents below as well as the AT-MIO-16DE-10 and AMUX-64T User Manuals.
AT E Series User Manual
http://digital.ni.com/manuals.nsf/webAdvsearch/6FB4341E8E3080F086256BD000550261?OpenDocument&vid=niwc&node=132100_US
AMUX-64T User Manual
http://digital.ni.com/manuals.nsf/webAdvsearch/AF2CEB4411E9D3DE862567130055EAAC?OpenDocument&vid=niwc&node=132100_US
How do I Address an AMUX-64T with an MIO Board?
http://digital.ni.com/public.nsf/websearch/C6D362737414AD6D862562A80070E694?OpenDocument
Taki
ng Thermocouple Measurements Using the AMUX-64T
http://digital.ni.com/public.nsf/websearch/9D8232DFFE50108F86256DCD005A319B?OpenDocument
I would start with making sure the AT-MIO-16DE-10 is installed and configured correctly. You can used Measurement and Automation Explorer (MAX), which is software that is installed with NI-DAQ, to configure and test the AT-MIO-16DE-10. The AT-MIO-16DE-10 user manual goes through the installation and configuration steps for the device. Then I would attach the AMUX-64T and try to acquire signals. You can use the AMUX-64T user manual and the other linked documents to help you determine how to acquire signals when the AMUX-64T is connected to the AT-MIO-16DE-10.
I hope this helps.
Regards,
Todd D.
NI Applications Engineer

Search LabView example for pretrigger with NI6110E.

extern trigger on Pin PFIO/TRIG1
thanks
amc holger

Hi Holger,
just take a look in the example finder in the folder
DAQmx/analogin/Acq&Graph Voltage-Int Clk-Dig Ref.vi.
This answer asumes that you use DAQmx under LabVIEW 7.0 (or 7.1) for acquiring voltage.
Norbert B.
NI Germany
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Looking for LabView driver for Suruga-Seiki motorized stage controller model D70

I'm Looking for LabView driver for Suruga-Seiki (Japan)motorized stage controller model D70, GPIB or RS232 (optional model D92).

Hi,
Unfortunately, I was unable to locate a driver for your instrument. I would like you to submit a request for this driver at: http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/ and with the instrument manufacturer. We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would s
uggest contacting one of the Alliance members at:
http://www.ni.com/alliance
An instrument driver is a collection of functions that implement the commands necessary to perform the instrument�s operations. In short, someone read the instrument user manual and implemented some of the functionality in a program for the end user. Instrument drivers are not necessary to use your instrument. They are merely time savers to help you develop your project so you do not need to study the manual before writing a program.
There are example VI's in LV on Instrument Connectivity. If you go to the Help menu >> Examples.. >> I/O, you will see a couple and Examples.. >> Fundamentals for File and String manipulation. I would suggest tweaking them to suit your application. Also the specific command that your instrument responds to can be found from it's manual.
Some useful resources for your application are
ni.com > NI Developer Zone > Development Library > Instrument Connectivity
http:/
/search.ni.com/?col=alldocs&layout=TechResources&ql=a , to search examples and knowledge bases
Hope this helps!
Best Regards,
Aaron K.
Application Engineer
National Instruments

Has anyone developed Labview ActiveX interface for Newport Electronics iSeries process meters?

I am needing to obtain readings from a Newport Electrtonics iSeries strain gauge meter. ActiveX controls are available for the device. However, I am just learning ActiveX controls within Labview and I'm not having any luck. Any Labview examples specific to the iSeries device would be greatly appreciated.
The model of the meter is i8SL33-EI.
Thanks,
RS

Just take a look in LV examples to see haw to access methods and properties (even events) and then try with your control.
If this control has a GUI, you better put it in a container rather then using the reference (it's easier to check the functionality).
p.s.: make sure that your control is properly registered (if you don't have an installation program for it, use regsvr32.exe to do it)

Where can I find example LabVIEW VIs for the NI-USRP?

There are several sources of example LabVIEW VIs for the NI USRP:
We have established a NI Community "NI USRP Example LabVIEW VIs" where you can find example VIs from us (NI) and the community.
The NI-USRP driver installs a variety of example VIs to the to the following folder on your PC:
<LabVIEW Installation path>\examples\instr\niUSRP
where you should replace <LabVIEW Installation path> with the root folder of your local LabVIEW installation. For instance, my Windows 7 32-bit PC here has LabVIEW 2011 installed and the examples can be found here: C:\Program Files\National Instruments\LabVIEW 2011\examples\instr\niUSRP
I've installed the NI-USRP driver, but I can't seem to find the new examples in the LabVIEW Example Finder. Where are the example LabVIEW VIs installed by the NI-USRP driver?
Although the NI-USRP driver does indeed install examples, the current NI-USRP 1.1 release does not update the LabVIEW Example Finder with entries for these examples. To find the examples, you can navigate the Windows Start Menu to the following location:
Start Menu\Programs\National Instruments\NI-USRP\Examples
This Start Menu entry includes several Shortcuts that point to folders that are the home to example VIs.
Sam Shearman

Hello,
It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
Hope this helps.
Scott B.
Applications Engineer
National Instruments

I am looking for labview examples related to ECG

Hi, everyone!
I need your help.
I am looking for labviews examples, which are related
to ECG for my thesis .
I wait for your answer.
thanks in advance

Burcu;
I am not sure what type of examples are you looking, so this is a start:
Searching at the LabVIEW Discussion forum I found:
Example
calculate heart rate from ECG
how to design a suitable vi to acquire ECG waveform?
Doing a search with Google:
LabView Exercise to model and analysis ECG/EKG data
EE 206 MINI-PROJECT I CARDIAC MONITOR VI
Searching an NI.com:
PC-Based ECG Monitoring and Analysis Using BioBench (LabVIEW VIs at bottom - not sure if link is dead)
Regards;
Enrique Vargas
www.visecurity.com
www.vartortech.com

Labview drivers for Zeiss A1 Microscope motorized stage

Hi,
Anyone tried to control the motorized stage of Zeiss Axioobserver A1 using Labview before? We have one in our lab. I am trying to get it work recently. I found NI has labview drivers for Zeiss Z1 and M1 model. The Z1 is the fully motorized version of A1 we have. So I think they should have the same motorized stage. But the Labview stage control drivers for the stage on Zeiss Z1 does not work for our stage. Has anyone done this before? Thank you!

Hi Cole,
The Labview version I have is 2010. The VISA version I had before is 4.1 so I updated it to 5.1.2. But I still met the same problem. The microscope is connected to the computer via a USB/CAN converter. I put the screen shot of this USB in attachment. When I try to run it from the VISA interactive control, it shows the error:Could not perform operation because of I/O error. (in the attachment)
I can detect this USB from the drvier wizard (see attacment3 ). But when I click next and install the inf files, it shows an error window (see attachment 4). This problem does not happen before I updated the VISA from 4.1 to 5.1.2. I have the inf file generated from the VISA 4.1 version (see attachment 5 and 6). But I can not generate the file from the 5.1.2 version. Will that be a big problem?
Do you have any ideas about this?
Thank you very much!
Best
Wei
Attachments:
USB.png ‏78 KB
USB2.png ‏72 KB
USB3.png ‏48 KB

Labview examples for Newport rotation stage Model URS50BBC

Similar Messages

Maybe you are looking for