Has anyone developed Labview ActiveX interface for Newport Electronics iSeries process meters?

I am needing to obtain readings from a Newport Electrtonics iSeries strain gauge meter. ActiveX controls are available for the device. However, I am just learning ActiveX controls within Labview and I'm not having any luck. Any Labview examples specific to the iSeries device would be greatly appreciated.
The model of the meter is i8SL33-EI.
Thanks,
RS

Just take a look in LV examples to see haw to access methods and properties (even events) and then try with your control.
If this control has a GUI, you better put it in a container rather then using the reference (it's easier to check the functionality).
p.s.: make sure that your control is properly registered (if you don't have an installation program for it, use regsvr32.exe to do it)

Similar Messages

Has anyone developed any Elemental I/O libraries for the C6713?

I just set up my TI DSK6713 with Labview's Embedded Module, but have found that there are no Elemental I/O libraries in the package. In fact, the package seems to lack the level support that it boasts on the website. Has anyone developed Elemental I/O libraries or know of a good tutorial/book that I could reference when building the library?

Hi,
The LabVIEW Embedded Development Module contains several example targets. These example targets each contain a subset of the available features in LabVIEW Embedded (such as Elemental I/O). There is a chart in the LabVIEW Embedded Porting Guide that lists the features contained in each of the example targets.
The DSK6713 example target does not contain an implementation of Elemental I/O. The Windows/Unix console targets and the PHYTEC LPC229x target all have an Elemental I/O Implementation that you can base the design of your own custom Elemental I/O on. The Elemental I/O Wizard is used to create new Elemental I/O for custom targets.
I am attaching a snippet of a presentation on Elemental I/O. I recommend using this, the Porting Guide, and myself as resources for more information on creating custom Elemental I/O.
Michael P
National Instruments
Attachments:
EIO.ppt ‏164 KB

Has anyone developed a labview program that calibrates thermocouples against a standard please.

I want to calibrate Thermocouples (Type B,R & S) against a national standard. Does or has anyone any labview code (6i) that can do this please.

What hardware are you using?

Has anyone tried running Dragon NaturallySpeaking (for Windows) on Mac Mavericks?

Has anyone tried running Dragon NaturallySpeaking (for Windows) on Mac Mavericks? I have finally given up on Dragon Dictate for Mac, which alas, after years of buying every new updated version, is still exceedingly buggy and does not begin to compare in quality to the PC version. I love my Mac, and don't like my PC at all, but the third-party voice dictation software for Mac is so pathetic, that I have wound up dictating on my PC, and then sending it to my Mac: an truly annoying and Baroque process. I was able to train over 120 words in Sanskrit word perfect on Dragon NaturallySpeaking, but on Dragon Dictate for Mac, I can't even get it to train my name. I know this is not an Apple problem, but I'm trying to find a way around by possibly running the DNS version on Windows on my iMac.
I have a hand disability, so I really do need to use voice dictation, both for dictating and navigating on my computer.
If anyone is doing this, are you using Boot Camp, VM fusion, or Parallels? How well does it work? Has anyone discovered anything else I ought to be considering, before giving this a try? I had tried running this on an old on 2008 iMac (with much less power), using Parallels, but it was incredibly slow. Now that I have a much more powerful iMac, I'm wondering whether it would be worth another try. As it will be quite an investment to purchase all this third-party software to get Dragon up and running, I was hoping to get a sense of how well it works, before plunking down the cash. I would be extremely grateful for helpful feedback.
IMac, Mavericks OS X 10.9.4, 3.5 GHz Intel core i 7, 8 GB 1600 MHz DD3, Dragon NaturallySpeaking 12, Dragon Dictate 4.0.2

You cannot run a Windows application on a Mac unless you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Benchmarks of all of the above except Crossover can be found in Benchmarking Parallels, Fusion, and VirtualBox Against Boot Camp - The Mac Observer. Boot Camp is only available with Leopard or later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Has anyone submitted a successful application for the up-to-date program?

has anyone submitted a successful application for the up-to-date program? I submitted my application 2 days ago and when I log on it's still under review. Has anyone had difficulty with this? When they finally get back to me am I likely to be offered iworks? - I've fulfilled all criteria, I just wonder whether they expect me to jump through any more hoops

Change your Mac's System Preferences to English and go to the Mac App Store and you should see it for free.
Otherwise see the Apple Up-To-Date Program:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=429&mforum=iworktips ntrick
Peter

Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

John -
My "Use" menu only contains Apple print drivers. And Canon drivers, from the location I set this machine up. None for my home use....which is a Xerox machine.
Not being on the menu, I don't know how to acquire this generic driver.
Any further helpful hints?
I appreciate your thoughts and help.
Lisa

Has anyone Installed SAP Best Practices for HCM

Has anyone installed SAP Best practices for HCM. I have to install the building blocks in the system. Can aynone guide me how to approach towards it?
Any kind of help is deeply appreciated
Regards,
Sanchit

Try this mate ,
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1060029
Cheers !!

HT4059 Has anyone found a reputable service for copy editing, etc?

Has anyone found a reputable service for copy editing, cover art and formatting for Word to iBook format?

Apple2Drew wrote:
Playlists were originally created to make CDS easier, so that's why I have hundreds
No it wasn't.
Playlists were created to make a list of songs.
Itunes does not make album recognition easy,
How is selecting an album not easy? And as you have noted, creating hundreds of palylists and managing them is NOT easy.
As many of you know, syncing playlists is a nightmare when you have many to sort through
Which is one reason to not create hundreds of playlists.
When I get a new cd, all I want is to drag and copy it to my ipod and iphone,
Why can't you select the album and drag it to the iPod or add it to one of a few playlists and sync?
should the artist start with an x or z.
Why not go the playlists and type x or z to go right there?

Has anyone tried REAL VNC client for Mac OSX? Is it worth the money?

Has anyone tried REAL VNC client for Mac OSX? Is it worth the money?

you should not be getting that many crashes and unlike others here i don't see any strong reason to go to 7.2 other than to get to 7.2.1. i very strongly suspect you have dodgy AU's (probably around 218 of them) and if you have a look at your crash log it should show you why you are crashing. if you see an AU in the crash log it is telling you it is causing headaches. my guess is that upgrading is not going to solve your problems.
just so you know, if everything is running as it should be logic will hardly ever crash. post up the crashed thread from your crash log next time it happens. also make sure that you have the proapp kit latest version.
i know its deeply frustrating when things are going pear shaped. everyone but everyone feels that the stupid thing should just work and gets the over-whelming feeling that apple is supposed to make products that just work, that we paid good money for that level reliability and if it's going to act like this we might just as well have stayed with cheaper PC's. reality is, once you start throwing thrid party's into the mix it is really hard to keep control of reliabillity. if you took logic back to zero 3rd party plugs and in built audio, it would take fanatical fundamentalist to crash the thing. (having said that - i reckon i could)

Has anyone received the new update for the X6?

has anyone received the new update for the X6 with the updated browser? what is the firmware version?
Greece Nokia X6 RM-559 v40.0.002

I agree with Vinimutta!!
*slide to unlock with digital clock & sms & missed call notification
*support for homescreeen widgets
*qwerty keypad in portrait mode
every single update so far was pathetic attemp to fool us and make us happy.
there is no change at all from v30,31, and 32. exect the slightly smaller font for text input in v32.
nokia promises alot in the new update, (browser, smiler and map)
hope it leaves up to the expectation and include the portrait qwerty,homescreen and lockscreen.
Why is it so hard to implement?
slide to unlock and homescreen is already available in c6, and the portrait qwerty is available in 5800.
its no like we are asking for impossible like continuous autofocus for video recording!!

Has anyone used ROXIO TOAST II for burning DVD

Has anyone used ROXIO TOAST II for setting up intro and burning to DVD. I used to do this in IDVD which has been abandoned in the Maverick

Just to say that that I've tested iDVD on 10.9 and it works for me. It's a discontinued program of course, and hasn't been supported for several years, but I don't think it runs any differently on 10.9 than it did on say, 10.6.
However…can't help you with Toast because I don't use it.
Russ

Has anyone develped a plug-in for Informix,Terradata or Postgres DB?

Hi,
Has anyone dveeloped a plug-in for Informix,Terradata or Postgres DB? if yes, would you mind sharing the plug-in with the EM user community?
Thanks
Anirban

Not a plugin, but a standalone free application:
http://homepage.mac.com/knarf/MacOSaiX/
Works great!

Has anyone developed a site for podcast in Muse? If so what are the pro's and con's vs. using Wordpress?

have built a few sites in Muse and hope to host my podcast on a dedicated Muse created site. I use BC for my sites. Has anyone designed a podcast site in Muse and if so, what are the por's and con's opposed to just doing this with Wordpress and power press plugins?

one-armed is the easiest to install - less disruptive as you can keep your current network unchanged.
However, it requires special configuration to guarantee that the return traffic from the server goes back to the CSM.
This is done by doing client nat which will prevent the servers to see the client ip address and therefore to create statistic based on client ip.
There is a way to inser the client ip in the HTTP header, but it only works for HTTP.
Router-mode is easier to understand and troubleshoot.
The CSM is just like a router with vlans and routing between each of these.
It requires a minimum of configuration.
However, it is important to design correctly.
For example I would recommend not to have client accessing the CSM directly.
They should go through the MSFC first.
Then I would recommend to have only 1 vlan between CSM and MSFC- this is because the CSM only uses 1 default gateway even if you can configure many.
You never know which is active.
The CSM also expect the traffic to come back on the vlan it went out. If you have multiple vlan it is difficult to control on which vlan the response will come back.
Finally 'bridge mode' is good if you want to insert the CSM between the servers and their current default gateway without having to reconfigure the servers.
This is a good solution.
Disadvantage is that all traffic from servers will go through the CSM and it is more difficult to avoid in case you really need it.
A little more complex to troubleshoot as well.
Conclusion: bridge or routing mode is ok - avoid at all cost one-armed.
Regards,
Gilles

Has anyone created a device driver for the DG101 Programmable Delay Generator?

I am wondering if anyone has written a LabVIEW driver for the DG101 Programmable Delay Generator third party device?

I have looked at the instrument driver network and there is nothing listed there. The board comes with the source code for the device as well as a gui to run under windows but I am working on the PXI-8196 embedded controller running a RTOS so the .dll that comes with the board is not compatible. I have been on the phone and email with NI over the last 3-4 weeks trying to figure out how to import the .dll, how to wrap the .dll, and how to create a new .dll. I spoke with someone yesterday and they told me that I would have to write a register level interface driver to work with the board and that it is very difficult for even the most experienced person. They suggested I outsource it but I was just curious, seeing that this board belongs to a very small community of programmable delay generators, that someone may have written a driver that is available.
Thanks,
Tracy L.
Message Edited by Tracy L. on 09-19-2006 11:48 AM

Has anyone tried installing BC2.1 for Vista 64-bit in the Safe mode?

Before I go ahead, has anyone attempted to install the BC2.1 64-bit update for Vista using the Safe mode?
The thought occurred to me earlier, and before I bothered, I was wondering if it had been tried yet by anyone?
As with most others with Vista 64 bit, the exe runs, asks for permission and then dies. Not even a whimper

I attempted to install the BC2.1 in the safe mode, but it still did nothing.
In the normal mode, viewing the Task Manager, when I click the update, after a long while the Task Manager shows a message, something to the effect, "BC2.1.exe is waiting for administrator approval."
After I check the box in the approval window that it's OK to run, the warning in the Task Manager disappears and nothing reappears, meaning the process died.
The system logs don't show very much, but I did not bother too much with them.
This is an issue that Apple has to address. I am confident that they will.
Meanwhile I will post a note on the developers board about it.
http://developer.apple.com/contact/
I presume when it's fixed, the update will show up in the Apple Software Update window, just as the XP update appeared on my other MBP.
Until then, it's just a bit annoying.

Has anyone developed Labview ActiveX interface for Newport Electronics iSeries process meters?

Similar Messages

Maybe you are looking for