Any labview example for resonator parameter measurement?

Hellow!
I am doing the measurement of the resonator parameter(like C0,L,C1,R) using network analyzer, are there anybody has some experience about it, are there any example code? thanks a lot!
Mike 

Mike,
Which network analyzer are you using.  You may be able to find some LabVIEW drivers for it at the following link:
National Instruments Instrument Driver Network
You may also check the other thread you started and the responses from JL Chew.
Network Analyzer
Hope this helps!
Andy F.
National Instruments

Similar Messages

  • Labview example for data capture using 5102 scope card

    How can I program a Labview Vi to control, and capture a waveform using the 5102 scope card. I need to be able to set it up to continually capture a waveform (Channel 1 and Channel 2) when triggered on a rising edge of channel 1 and then store the data on disk automatically, then wait for the next trigger.
    Any help or tips as to how I could do it would be helpful.
    Thanks
    Allan

    Allan,
    Please find the attached zip file that has some useful LabVIEW examples with scope 5102
    Zvezdana S.
    National Instruments
    Attachments:
    scope.zip ‏181 KB

  • Where can I get LabView examples for PXI-6551 or 6552? Thanks

    We are thinking of buying a 655x and wanted to see sample code to get an idea of its capabilities.
    Does anyone know where I could find LabView examples?
    Any other information related to the PXI-655x would be appreciated too!
    Thanks,
    -KP

    Hi KP,
    Thanks for your interest in the NI 655X. These products use a brand new driver, NI-HSDIO, which is based on DAQmx. We are still working on a more bandwidth-efficient web installer for the driver, but for now I have placed it on our temporary ftp site. You can find it at ftp://ftp.ni.com/incoming/HSDIO.zip
    This driver contains a full set of example programs for both LabVIEW and CVI, and the help files are a great way to learn about the physical capability of the board.
    Do you have any other questions about these products?

  • Is there any LabVIEW driver for the Agilent 53147A counter/power meter?

    I am trying to find a LabVIEW driver for the Agilent 53147A counter/power meter, but I cannot find it. Is there any?

    NI does not have a driver and a quick check with Agilent shows that they don't have a driver either.
    You can go to http://www.ni.com/devzone/idnet/ and request a driver. You will also find links on how to create your own driver. Your other option is to use the Instrument I/O Assistant.
    p.s. In the future, you should use the Instrument control board for posting questions. this board is for NI counter/timer products.

  • Is there any code example for "Web Survey"?

    Hi buddies,
    In the standard SRM Web Survey scenario, the experts submit questionnaire online. But our custmer want it offline.
    So we use offline Adobe Forms, the problem is after we get the data by uploading the offline PDF, how we put the data into the standard Web Survey. Is there any function moudle , BAPI, class for this purpose?  Is there any code example?
    Thanks!
    Hao

    I have tried to write some report using pch logical database and successed.
    在报表自身中，从 GET OBJEC 点，作为规定，数据库驱动程序将文件 PLOG 中的选定的选择恢复为规定的并检查权限。
    指令 TABLES 中结构声明是前提。若除了结构 OBJEC，还定义结构 GDSTR，则将结构评估的参数添加到标准选择屏幕。这可以通过评估路径进行结构评估。
    REPORT  ZPHC_TEST.
    TABLES : objec.
    infotypes: 1000.
    INITIALIZATION.
    START-OF-SELECTION.
    get objec.
    WRITE : p1000-objid.
    end-of-SELECTION.

  • LabVIEW Example For Younger Crowd.

    Hello,
         I am giving a presentation for a group of younger kids this friday, June 29th and I need a LabVIEW example that I can show them and talk about.  So I need something that younger kids, ages 5-13 can understand.  Its ok if its too boring for the older kids and too confusing for the younger and vise versa.  I can adjust how I talk to compensate.  So far I have a bouncing cube demo, but that is not complex enough to talk about for a length of time.  I would also like the example to relate to engineering as much as possible and is not just a game like Tic Tac Toe. Thank you for your suggestions.
    Michael Boyd

    It is always good to do something where the students can be involved during execution. For example you could fill two parallel tanks with random numbers and take bets which one fills first. (learn about loops, shift registers, comparison (see if it is full), decision, etc.)
    You might also do some real DAQ with the soundcard. Again do a "race" where the two tanks fill according to sound volume. Do a FFT and tie one to the high frequency (girls!) and one to a lower frequency (boys!) and let the class scream their heart out to advance each tank/slider.
    Other soundcard things would be a simple voice scrambler or changer (doesn't work that well without RT). SImply record some sentences, do some digital signal processing, then play it back. See how the sound changes depending on settings (double/half the frequency, low-pass, hi-pass, etc.)
    If you have more time, you could also e.g. test batteries and see what brand is best. See:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=107032#M107032
    LabVIEW Champion . Do more with less code and in less time .

  • Labview examples for an "http transponde​r"

    I’m looking for Labview examples (LabView 5.1 or 6i) to make an “http transponder” between an intranet and internet networks.
    I’ve a “system” configured with a TCP-IP address in the local intranet network, it isn’t a PC but its behaviour is like a local “web server” without external access, so it is possible to send it URLs from an every PC (with internet explorer) inside the local network, to get the “system” status.
    I’d like to monitor that “system” in the internet network also, so I need to make an “http transponder” on a PC connected in the local intranet network, but with external access permission.
    So it can be possible to s
    end URLs to the transponder by a PC in the internet network, and the transponder can redirect them to the “system” in the intranet area.
    The “system” can send his status along the inverse route.
    Thank you in advance.
    Natalino.

    Thank you, it would be useful, but I haven't an "Internet Toolkit" at the moment.
    I made some attempts with low level Tcp-ip functions, and I obtained good results by loading static html pages, bad ones by loading dynamic pages.
    I think is an integration problem (timeout, waiting times, etc..), so some "previously tested" examples with Tcp-ip function would be very useful.

  • Are there any labview drivers for the chromalox 2030 controllers?

    I am looking for drivers to communicate with the 2030 chormalox environmental controllers.  I haven't been able to find any.

    I never did write anything for the Chromalox...lightning end up zapping it and we replaced the Chromalox with a Watlow. Check out the Product Instruction Sheet (PDF) at the link below. It's pretty basic, but might be enough to get you going. If not, I'd shoot an email to Chromalox and ask them if you have any communications manuals for it.
    http://www.chromalox.com/products/prodinfo/en/2030.html
    -- Jason (Matt)

  • Looking for Labview Examples for At-MIO-16DE-10 and AMUX-64T

    looking for examples to record:
    Load vs strain and temperature using these two.
    Also a quick guide to how to get started. I hav Labview 6i and the card and board. No experience yet.

    Greetings,
    There are a variety of documents on our website that contain information about using the AMUX-64T with an MIO device. There are also example programs that show how to acquire readings using an MIO device with the AMUX-64T. I have linked to some of better documents below as well as the AT-MIO-16DE-10 and AMUX-64T User Manuals.
    AT E Series User Manual
    http://digital.ni.com/manuals.nsf/webAdvsearch/6FB4341E8E3080F086256BD000550261?OpenDocument&vid=niwc&node=132100_US
    AMUX-64T User Manual
    http://digital.ni.com/manuals.nsf/webAdvsearch/AF2CEB4411E9D3DE862567130055EAAC?OpenDocument&vid=niwc&node=132100_US
    How do I Address an AMUX-64T with an MIO Board?
    http://digital.ni.com/public.nsf/websearch/C6D362737414AD6D862562A80070E694?OpenDocument
    Taki
    ng Thermocouple Measurements Using the AMUX-64T
    http://digital.ni.com/public.nsf/websearch/9D8232DFFE50108F86256DCD005A319B?OpenDocument
    I would start with making sure the AT-MIO-16DE-10 is installed and configured correctly. You can used Measurement and Automation Explorer (MAX), which is software that is installed with NI-DAQ, to configure and test the AT-MIO-16DE-10. The AT-MIO-16DE-10 user manual goes through the installation and configuration steps for the device. Then I would attach the AMUX-64T and try to acquire signals. You can use the AMUX-64T user manual and the other linked documents to help you determine how to acquire signals when the AMUX-64T is connected to the AT-MIO-16DE-10.
    I hope this helps.
    Regards,
    Todd D.
    NI Applications Engineer

  • Is it possible to make a Frequency Domain Reflectometer using LabView? For waveguide frequency measurement?

    Hi everyone
    I have a tricky question that I have looking around for the answer but couldn't find it!
    I want to know if I can build a Frequency Domain Reflectometer (FDR) to measure frequency return in waveguide. Telecommunication engineers would understand what I mean! It a bit like TDRs but its frequency instead of time. 
    I would like to build a Frequency Domain Reflectometer using labview application, how can I do that? What sort of code do I need and what equipment do I need to operate with the NI code?
    Please give me the chance to thank you all very very much for your help and support and for looking here,
    regards
    Fezz

    Hi Fezz,
    I am not familiar with using FDR systems but know there is a good example of producing a TDR in LabVIEW available on the community. This might provide you with a base and a grasp of the architecture you could use to create the functionality.
    Time-Domain Reflectometer (TDR) Example
    Regarding the equipment you would require to achieve this I strongly recommend contacting your local NI office who will be able to adviser you fully as this will depend upon your desired specification.
    Kind Regards,
    Aaron. E
    Applications Engineer Team Lead
    National Instruments
    ni.com/support

  • Labview examples for Newport rotation stage Model URS50BBC

    Hi there,
    I am currently wanting to control the motion of the motorised mount using Labview, but I dont have examples, Can you ,possibly, help me please?
    The mount Model is: Newport rotation stage Model URS50BBC.
    Thank you ,
    Maab

    Hi CasiL,
    Thank you for this.
    I doenloaded them, and it is Ok now, however , the example need COM adress ,when I put 1 , it says : failed in connection and somthing about VISA identification..
    I dont know how can I found VISA or code library,I will attach the error box.
    Thank you very much,
    Maab
    Attachments:
    error labview capture.JPG ‏256 KB

  • Search LabView example for pretrigger with NI6110E.

    extern trigger on Pin PFIO/TRIG1
    thanks
    amc holger

    Hi Holger,
    just take a look in the example finder in the folder
    DAQmx/analogin/Acq&Graph Voltage-Int Clk-Dig Ref.vi.
    This answer asumes that you use DAQmx under LabVIEW 7.0 (or 7.1) for acquiring voltage.
    Norbert B.
    NI Germany
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Is there any code example for LDB PCH

    I always write report using logical database 'PNP' and 'PNPCE',  which make it very easy to have code for HR master data.
    The 'PCH' is for OM data, is there any method, like using "PNP", can make program for OM easier?
    Many thx, if any help.

    I have tried to write some report using pch logical database and successed.
    在报表自身中，从 GET OBJEC 点，作为规定，数据库驱动程序将文件 PLOG 中的选定的选择恢复为规定的并检查权限。
    指令 TABLES 中结构声明是前提。若除了结构 OBJEC，还定义结构 GDSTR，则将结构评估的参数添加到标准选择屏幕。这可以通过评估路径进行结构评估。
    REPORT  ZPHC_TEST.
    TABLES : objec.
    infotypes: 1000.
    INITIALIZATION.
    START-OF-SELECTION.
    get objec.
    WRITE : p1000-objid.
    end-of-SELECTION.

  • Any simple example for comparator for treemap

    I have a treemap collection stored some data like
    a:4
    b:7
    c:5
    d:7
    e:1
    f:3
    The Treemap helped me to sort by key value like above.
    But what I want is sort by value , it should be like this
    b:7
    d:7
    c:5
    a:4
    f:3
    e:1
    I know comparator object can help me about the sorting mechanism in treemap, it is used like
    comp is comparator
    TreeMap tm = new TreeMap(comp)
    but I don't know how to construct this comparator object to help me sort by value.
    Any one can help me here??
    Thank you

    Here's a sample that demonstrates the issue. Note that when you run this that the comparator class never sees the data items (in this case 'a' - 'f'), only the numbers.
    Also notice that both sets that are returned (keySet and entrySet) are appropriately sorted.
    Finally, it is interesting to note that it looks like the TreeMap.get() method walks the tree to find the entry (no surprise), but the entrySet method returns both the keys and data in one shot. This implies that there may be a performance blip gained by asking for the entrySet and getting the values that way, rather than the first technique using the keySet and get().
    import java.util.*;
    public class x
         public static void main(String args[])
              TreeMap t = new TreeMap(new Comparator() {
                   public int compare(Object o1, Object o2) {
                        Comparable c1 = (Comparable) o1;
                        Comparable c2 = (Comparable) o2;
                        System.out.println("Comparing " + c1 + " - " + c2);
                        return c1.compareTo(c2);
                   public boolean equals(Object o) {
                        return false;
              String s;
              t.put("1", "f");
              t.put("2", "e");
              t.put("3", "d");
              t.put("4", "c");
              t.put("5", "b");
              t.put("6", "a");
              Iterator i;
              Set keys = t.keySet();
              i = keys.iterator();
              while(i.hasNext()) {
                   s = (String)i.next();
                   System.out.println(s + " - " + t.get(s));
              Set entries = t.entrySet();
              i = entries.iterator();
              while(i.hasNext()) {
                   System.out.println(i.next());

  • Is there any labview drivers for Spirent 5500 wireless channel emulator

    Spirent 5500 currently doesn't have GPIB capability despite the connector on the rear panel. It is controlled via .net from a laptop. Labview drivers needed.

    Clarification:
    National Instruments would like to receive driver requests for all instruments that do not have drivers available on ni.com/idnet. Each request is being added to our instrument driver request database and considered for development. We try to develop instrument drivers according to popularity. Unfortunately, we cannot develop instrument drivers for all the requests we receive.
    If a customer would like to try developing his/her own instrument driver, we have documentation, model instrument drivers, and driver templates to help him/her in development. This information can be found on our web site: http://www.ni.com/devzone/idnet/development.htm
    Thanks,
    Instrument Driver/IVI Group
    National Instruments

Maybe you are looking for