Lacie d2 drive to Ap-Extr to MacBook Pro

I am quite new to OSX. Got my lacie d2-Ethernet 300gb drive and can't figure out how to get the MacBook (OSX 10.4) to see it.
I can access Internet through the Airport Extreme. I can connect an external USB printer to the USB port on the Extreme and use the printer.
Yet when I connect the external drive through the Airport Extreme, nothing I do can find it.
I have the Lacie IP-Configure program but it says it can't find a " server " and I get no farther with that program.
The Airport Extreme connects to the Speedstream DSL router and hence to the Net.
Is there something else I am supposed to configre?
Frobozz

Just got off fone with Lacie.com support....got a new driver that updated the d2's internal firmware.
That said, now I am seeing a Disk Utility Screen asking me to partition ... took a screen snapshot of THAT window but haven't a way to post it here.
Haven't a clue which of several formats to partition the 300gB drive ..... looks like it's broken into as maany or little partitions as I would want.
An option for master boot ... I would like to be able to boot from it then have one or two large areas to do backups from the laptops in the home here ... via the Etherneet Conx on the AirPort Extreme
So I guess the Q now is how to correctly partition it and is rather off topic for this forum

Similar Messages

  • Samsung hard drive problems with mid 2009 Macbook Pro

    Arghh, this is driving me mad. 
    I'd like to know if anyone has installed a Samsung HM641JI SATA II hard drive into a mid 2009 Macbook Pro (mine is a 2.8Ghz) and, if so, how they managed it. The drive is 640GB. These are the steps I've taken:
    1. Swap out the stock drive for the Samsung
    2. Boot from a USB drive which contains a mirror of my system
    3. When the system identified the new disk, I formatted it with 2 partitions (GUID table, HFS journaled)
    4. Reboot
    5. System is very slow. Boots from USB but can't use keyboard to login
    6. Switch off and try again
    7. Remove Samsung drive
    8. Reboot from USB (works perfectly)
    9. Downgrade firmware to 1.6
    10. Replace samsung drive and try again
    11. System boots from USB
    12. Verify that drive is running at 1.5Ghz
    13. Disk utility and system profiler both crash
    14. Disk unmounts by itself and other random weirdness
    15. Remove Samsung drive
    I've read endless reports about the firmware in this model of Macbook Pro and its issues with SATA II but struggling to find anything current and specific. Two questions:
    a. Is there anythign I can do to get this drive to play nicely?
    b. What drive should I get if the answer to a is no?
    As a bit of background.. my system began playing up last week with lots of spinning beach balls resulting in forced switch offs. Booting from a mirror on a USB drive works perfectly so I concluded that the drive was on its way out. A drive test utility confirmed this. I'm now wondering if it really was the drive or the cable or the logic board.
    Any advice appreciated.
    Cheers
    //A

    I'm coming around to the idea that this might be a problem with the SATA cable rather than the drive.
    I currently have the stock drive (Hitachi) back in the macbook. It mounted for a while and was then ejected when I tried writing data to it. System profiler reports that "There was an error while scanning for Serial-ATA devices."
    I was able to mount the same drive in a USB enclosure this afternoon without any problems. Right now, I seem to be having issues with both the Samsung drive and the Hitachi drive - I wasn't suspicious of thr latter because I thought it was failing.
    I found one or two accounts of other people having similar problems that were resolved with a new sata cable.
    How does a cable fail? Could this be my problem?
    Cheers
    //A

  • What is largest solid state drive I can install in MacBook Pro 8,2?  I want to perform a clean install of Mavricks and dump my old hard drive.

    What is largest solid state drive I can install in MacBook Pro 8,2?  I want to perform a clean install of Mavricks and dump my old hard drive.

    If the bank account permits, I suggest getting a 1 TB SSD anyway.  One cannot have too much storage. 
    Unless you are having issues with your current installation, a 'clean' install is not necessary.  It would be more efficient to clone your current drive to the new SSD, test it, and then do the swap.  The installation of Mavericks over Snow Leopard can be done either before or after the cloning process.
    Ciao.

  • Setting up an external hard drive to back up my MacBook Pro?

    I am currently using a 320GB Western Digital external hard drive to back up my MacBook Pro using Time Machine, soon however I am going to be putting Windows 7 onto my machine so I am trying to figure out how I am going to back up the Mac OS X and the Windows partition at the same time using this hard drive. I am thinking about completetly erasing the drive and putting 2 partitions on it in 2 different formats (one for Mac OS X and one for Windows). I am also thinking of using Carbon Copy Cloner instead of Time Machine because it creates bootable backups. However, now that I am thinking about using Carbon Copy Cloner I am wondering if FAT32 will work for both partitions? (I have been using Mac OS X extended (journaled) only because it works with Time machine). I need help though because I would not know how to go about completely erasing/resetting the drive etc.. then partitioning it and formatting it. I am also wondering if there is a windows equivalent of CCC or Super Duper to back up the Windows partition. Thanks for your help in advance.

    I'm inferring from the way you wrote about using Windows that you plan on using it through Boot Camp.  Have you considered using VMware Fusion (or Parallels) instead?  Then Time Machine would back up the virtual machine along with everything else.  You also have the advantage that you can use both Mac OS and Windows at the same time - you don't have to choose one or the other.  There are two disadvantages.  First, since both Mac OS and Windows are running simultaneously, you need more memory.  I'd recommend no less than 8 GB if you run any serious software on either OS.  You can get away with 4 GB, but at times the system will be really slow.  Second, the virtual machine images are BIG - mine typically run over 20 GB - so you'll probably want a bigger backup drive if you go this way.

  • I replaced my hard drive on my late 2006 Macbook Pro.  I tried to do a reinstall of Tiger 10.4.5 from my start up disk.  I get an error that states "can't install on this computer." HELP

    I replaced my hard drive on my late 2006 Macbook Pro.  I used the disk utility and erased the drive and formatted it to OSX Journaled .  When I tried to install the OS from the start up disks I got the error "Can't install on this computer.  I have verified the drive.
    I have used Super Duper to copy my old drive to my new drive.  But I wanted to do a fresh install.  How do I go about this? 

    Did you do the Super Duper clone before you tried to reinstall the OS? If so, the original install disc is likely earlier than 10.4.11, and that may be why you are getting the message.
    When trying to reinstall the OS, did you select the "Archive and Install" option? If not, you might try that. Here's a link that might help:
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1103.html
    Good luck!

  • How do i transfer music from an external hard drive to itunes on my macbook pro?

    how do i transfer music from an external hard drive to itunes on my macbook pro?

    easy just open iTunes and Finder together and drag the songs into iTunes
    George Karakadas, hope this helped u. if it helped u PLZ RATE MY AANSWER AS: "CORRECT ANSWRER" thnx

  • How do I download photos from a thumb drive to iphoto on my MacBook Pro?

    Hoe do I download photos from a thumb drive to iphoto on my MacBook Pro?

    Your profile shows you have a MacBook Pro running OS 10.3.x. A MBP can't operate on OS 10.3. So, what model Mac do you have and what OS is it running?
     Cheers, Tom

  • What SSD (Solid State Drives) will work with a MacBook Pro unibody  A1278

    What SSD (Solid State Drives) will work with a MacBook Pro unibody  A1278?
    I see all these options and I would like to know proper dimensions and speed:
    SATA III (6 Gbit/s)
    SATA II (3 Gbit/s)
    SATA (1.5 Gbit/s)
    PATA (IDE)
    mSATA
    PCI Express
    Thanks!

    Thanks! It looks like Sata III is the way to go and most are happy with this one:
    Samsung 840 EVO
    http://www.amazon.com/Samsung-Electronics-2-5-Inch-Internal-MZ-7TE250BW/dp/B00E3 W1726/ref=sr_1_1?s=pc&ie=UTF8&qid=1396894663&sr=1-1&keywords=ssd+2.5

  • New Lacie Rugged Thunderbolt External Drive won't mount on Macbook Pro 8,1

    I've searched, and am coming up empty handed. Any help would be appreciated.
    So I own a late 2011 Macbook Pro 8,1. that's running version 10.9.5.
    I bought a brand new Lacie Rugged Thunderbolt External HD that won't mount via Thunderbolt, though it works fine with the USB. Any ideas as to why the Thunderbolt connection isn't working?

    Silly question, but - did the drive come with a Thunderbolt cable or did you purchase one with the drive?
    Call back...
    Clinton
    MacBook Pro (15-inch Late 2011), OS X Mavericks 10.9.5, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • What is the best external hard drive to purchase for a Macbook Pro with OS X 10.7.5?

    I'm looking into purchasing a new external hard drive for video editing purposes.  I own a Macbook Pro which operates on OS X Lion (10.7.5).  I would like at least 1TB of memory (2TB maximum) and a FireWire 800 port for a reasonable price.  Any suggestions of brands or specific models?

    LaCie is a good brand name.
    Avoid WD "combos" ... the pre-packaged boxes with WD drives.  WD tends to pick controller/interface cards that fail and scramble the disk data.
    But you can go to macsales.com and buy a "OnTheGo" enclosure and add "bare drives" from WD as their drives are good.
    I ahev this "toaster" that allows easy chaning of "bare drive": http://eshop.macsales.com/item/NewerTech/FWU3ES2HDK/

  • Two hard drives, two operating systems, one MacBook Pro

    Dear community,
         I have a MacBook Pro (mid-2010) with Mac OS Lion. I plan on having this computer all through the rest of college (another two and a half years, hopefully) so I want to upgrade it just a bit. What I would like to do is take out my optical drive, install a second hard drive mount, and put an SSD in that spot. Now, this would be pretty simple if it were just Mac OS Lion that I wanted on it, but here's the catch - I'd like to put my copy of Windows 7 on that drive as well. I currently use one hard drive for Mac/Windows 7 using boot camp, so I figured it'd be possible to do this with 2 hard drives.
         Basically I'd like to put the OSes and a few programs on the SSD, and the files/remaining programs on my big HDD. Is this even possible? Any suggestions?
         In summary: Mac OS Lion and Windows 7 + a few Mac/Windows apps on the SSD; Mac OS and Windows data files and programs on the HDD. Can it be done?
    Thanks a lot.
    -Grant
    *Note- here is the hard drive caddy I'm looking at: http://www.amazon.com/Drive-Unibody-MacBook-SuperDrive-Replacement/dp/B0058AH2US /ref=wl_it_dp_o_npd?ie=UTF8&coliid=I1MJCRJMNCU4QQ&colid=1LV4HAU48M27X

    grantmcconnaughey wrote:
    Dear community,
         I have a MacBook Pro (mid-2010) with Mac OS Lion. I plan on having this computer all through the rest of college (another two and a half years, hopefully) so I want to upgrade it just a bit. What I would like to do is take out my optical drive, install a second hard drive mount, and put an SSD in that spot. Now, this would be pretty simple if it were just Mac OS Lion that I wanted on it, but here's the catch - I'd like to put my copy of Windows 7 on that drive as well. I currently use one hard drive for Mac/Windows 7 using boot camp, so I figured it'd be possible to do this with 2 hard drives.
         Basically I'd like to put the OSes and a few programs on the SSD, and the files/remaining programs on my big HDD. Is this even possible? Any suggestions?
    The SSD should be the boot drive in the present hard drive spot for these reasons.
    1: You want the SSD as the boot volume for speed of OS X, Windows and applications (must be on boot drive along with one bare bones user, each OS)
    2: You want to inflict as little change to the SSD as possible to make it last longer as they can wear out with a lot of use, thus a boot/app drive is ideal for this.
    3: Present hard drive becomes the exFAT formatted drive to use for Windows or Mac file storage use in the optical bay caddy.
    Problems:
    You can't install Windows from a external optical drive, only the internal one.
    You also won't be able to boot off a 10.6 install disk just the same.
    However you can option boot off 10.6/10.7 previously installed, or cloned (Carbon Copy Cloner), on a external drive.
    Windows in Bootcamp is subject to the same problems requiring reinstall like it is on PC's, which to reinstall would require you to install your internal optical drive each time.
    You can't make a bootable clone of Windows on a external drive and use it (because of validation issues with the drive Windows is installed on) or use it to restore Bootcamp (there used to be software that did this for Snow Leopard, but it hasn't been updated anymore)
    Also if your 2010 MBP doesn't have SATA 6, your going to be using SATA 3 and not the full speed capability of the SSD.
    What you might consider doing instead is getting a 1TB 7,200 RPM boot drive, you get storage size to partition and decent speed, without excessive speed which you might not be able to use it all with your hardware.
    Another option, if your using Windows for non-hardware presisng issues (3D games, heavy CPU loads) is to use virtual machine software (VMFusion, Parrallels Desktop etc) and run Windows in a window on OS X.  This gives the advantage of Windows running as a file, and you can have earlier "snapshots" in case Windows gets hosed like it does sometimes.
    Also Bootcamp restricts you to Windows 7, with virtual machine software you can run any Windows version, even cool Linux distros too (install older versions first then upgrade) Plus you don't have to dual boot or worry about file formatting issues, which both is a pain in the butt.
    Lion is a pain to reinstall on a new hard drive directly with older hardware (two steps involved), luckily you've got a older machine and can install 10.6.8 first, then upgrade by holding option key and clicking on Purchases, then apps, then files, then bootcamp or virtual machine software, then Windows.
    Should make a copy of that 10.6 disk
    http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
    So anyway, that's a loadful to think about.
    What you should do is join the MacOwnersSupportGroup and ask Bmer how best to go about installing the optical drive kit. I've send all these sort of hardware hacks his way as he has done it himself so he knows.
    Apple obviously doesn't support such a thing and nearly none here can offer any support in such a thing.
    OtherWorld Computing has a kit as well, gives a enclosure for the Superdrive to use as a external optical drive as well. (just can't boot or install Windows with it.)
    As always this is all I know and subjective to change, so ask around further and perhaps you'll find more answers, but likely not here.
    See this for fast SSD choices
    http://www.harddrivebenchmark.net/high_end_drives.html
    Good Luck and hope that helps.

  • Can I create a windows 7 partition on a 1TB thunderbolt drive to use with my Macbook Pro?

    I have a new Retina Display Macbook Pro with a 250gb SSD Drive that is quickly running out of space. My work recently gave me a new project to do some programming that can only be done in a Windows environment. With the price of Thunderbolt drives coming down I was wondering if I could build and boot to a Windows 7 partition on the Thunderbolt Drive and use that when I need to run Windows applications. Also what would the speeds be like? Would I be able to run apps like Photoshop and Illustrator? Also if that works would I be capable of creating a partition for my kids to install their games on?

    Redgoat,
    (1) USB 3.0/2.0 Drive will boot a windows 7 installation,  (hold down option when you boot)
    * I am not yet awake if thunderbolt drives will be detected by the macbook pro for booting purposes.  I cannot see why not
    (2) if you are concerned about speeds you can purchase a SSD USB 3.0 drive but a standard hard drive is quite reasonable with a USB 3.0 connection
    and lastly MacBook Pro Retina are mean gaming notebooks and bootcamp is the best way to do windows gaming on it.

  • Can't get my external hard drive to show up on MacBook Pro

    I used Time Machine to keep backups for my MacBook Pro using the latest version of Lion. I backed up to a WD external drive. My computer went to be repaired and they had to put in a new hard drive. When I got home and plugged in the external drive it appeared on my desktop. The Apple rep told me to drag over folders from the backup. I looked through a few of the backups (dated) and everything seemed to be there. But I got the spinning wheel as I tried to copy over "latest". I couldn't get rid of it and had to reboot.
    So next it appeared, showed one folder but when I clicked on that folder there was nothing inside.
    Then I couldn't see the hard drive any longer.  Now I take out the drive and plug it in again and the drive won't appear in the list of devices. I use the disk utility and it doesn't see it either.
    Needless to say I'm pretty concerned. I've had the problem of an external drive not appearing a few times over the years but a reboot or unplug and plug back in always fixed it. not this time.
    Help!
    Much appreciate,

    If you have recently upgraded to Lion, it would be probably a matter of drivers. You should go to the official web site and download the latest drivers. If not, try to format the HDD with disc utilities. If your disc doesn't appear even in disc utilities, try to format it with any copy of windows in fat 32 format

  • USB drive no longer recognized in macbook pro but recognized by other macbook pro

    USB drive previously recognized, removed without correctly ejecting, now not recognized at all.  Tried it in other macbook pro and it popped up just find.  I can see it in Utilities/Disk Utility area and tried to repair but still not showing up in Finder.

    You may get more specific help in the Notebooks section https://discussions.apple.com/community/notebooks/macbook_pro
    This area is for the Mac Pro (desktop).

  • Hard Drive and memory upgrade on macbook pro (13" mid 2009)

    I want to upgrade my current hard drive and memory (currently 250gb and 4 gb) but i'm having trouble to find out which one is going to fit.
    I considered buying this ones
    http://www.bestbuy.com/site/Western+Digital+-+Scorpio+Blue+1TB+Internal+Serial+A TA+Hard+Drive+for+Laptops/9960668.p?skuId=9960668&productCategoryId=pcmcat189600 050008&id=1218253425468
    http://www.bestbuy.com/site/Kingston+Technology+-+4GB+PC3-8500+DDR3+SoDIMM+Lapto p+Memory/2129381.p?skuId=2129381&productCategoryId=abcat0506002&id=1218404812331
    Any ideas?

    OWC is a reputable supplier of hard drives and RAM upgrades to the Mac community.
    Go to their site, lookup your model MacBook Pro and see what upgrades are available.
    The 1tb WD Scorpio Blue is a 5400rpm drive and slower than the crop of 7200rpm drives.
    Do you need space over speed?

Maybe you are looking for