Landed Cost Error "Some rows could not be calculated weight data is missin

Friends,
   I am facing an error "Some rows could not be caluculated weight data is missing [Message 922-7], I have defined the weight in Item Master in Both Purchaing and Sales Data tab.
Faisal Baloch

This message is not related to any weight factors for your item master.  They refer to every row in your document must have a weight factor, not physical weight.
Thanks,
Gordon

Similar Messages

  • Landed Cost error based Goods receipt note

    I have the following scenario at a client trying to post landed cost in US dollar against a GRN also in US dollar for a supplier set to US$
    The following message displays trying to post the landed cost: Transaction currency differs from BP or account currency:
    1) The supplier has been used numerous times before and is in UD$ currency
    2) The General ledger clearing accounts is also set to All currencies
    3) We also deleted all the lines on the landed cost document and with only one line on the document the message still appeared.
    Some of the items has been sold in the meantime and part of the offset posting will be posted to Cost of sales. The Cost of sales accounts is set to South African Rand. I thought that will be a problem and I have set them to various currencies and still could not post the landed cost document in US$
    I also upgraded from PL49 to SP1 PL05 and still the issue prevails.
    Any assistance will be much appreciated.

    You may check this thread first:
    Error Transaction Currency Differs - Goods Receipt PO
    Thanks,
    Gordon

  • When i download any file it start in a second but when i pause the downloading file & after some time when i open it amessage flash 'download error' source file could not be read please try again later or contact the server administrator.

    when i download any file it works frequently and downloading start in a second but when i pause the downloading file & after some time when i open it,The downloading not start proper and after some time a message flash 'download error' source file could not be read please try again later or contact the server administrator.

    I downloaded the Microsoft Autoruns package and ran it.  There are no programs in the LSA Providers tab, and Apple's Bonjour is the only program in the Winsock Providers tab.  I also did the "netsh winsock reset" and rebooted.  It didn't fix the problem.  Any more ideas?

  • Revel Error Message: "Some files could not be uploaded."

    Error Message: "Some files could not be uploaded. 1 file was unable to be uploaded and was skipped." I am a Revel user from its inception. I have never had upload errors before in Adobe Revel. I am trying to upload jpeg files in the same way I have done for months, which is by dragging and dropping files directly into an album I have created. Starting yesterday, only some files upload properly. Others receive the above error message. When I have tried to re-upload the jpegs which have not gone, I receive either the same error message or a slightly different error which indicates the files are not uploading because they are duplicates. They're not duplicates and appear nowhere else in my Revel albums. I have rebooted my Window 7 PC, I have repeatedly logged out and back into Revel. I have tried both Firefox and IE. I have tried creating new albums and uploading the failed files to a new album. I have cleared my Firefox cache. I have tried both the "drag and drop" feature and the "Add Photos or Videos" button in Revel. I have tried using the "Export to Revel" feature in Adobe Photoshop Elements 11. I have tried uploading never-before-attempted files, and - on average - only 25% of those brand-new files are uploading. I am a subscriber and pay for the Revel service, so I am not bumping into any upload quotas. I have read through these forums and have found problems similar to mine as far back as May 2013, but none of the problems ever seem to have been resolved other than the users simply giving up. Can you help? I am becoming increasingly confused with respect to which files have succeeded and which files have failed. Thank you. -Dori

    Yvonne-
    You can have many libraries with many albums and files within them. Each library is independent, so if you upload a file to two libraries then you two copies. If you put a photo from a library in albums that live within that library, then there is only one copy in the library that each album has access to so it will show up when you view the album. This might help : http://forums.adobe.com/message/5197228#5197228.
    I found a few incomplete files in your account also. We will take care of this for you and contact you when it is complete.
    Pattie
    Some of these links might also be useful to you:
    Revel FAQ’s:
    http://forums.adobe.com/community/revel/faq
    especially:
    FAQ: Where can I learn tips and tricks about Revel? http://forums.adobe.com/message/5798092#5798092
    FAQ: How do I share my photos in Revel? http://forums.adobe.com/thread/1295026
    FAQ: How do I add (upload) files to revel? http://forums.adobe.com/thread/1162795?tstart=0

  • Acrobat v10x CS6 Installation: "Some items could not be installed and then Error 1301

    Brand new MacBook Pro Retina 16GB, 512SSD, Mountain Lion.
    I successfully installed all apps in CS6 Web and Design Premium EXCEPT... I had a warning on Acrobat install: "Some items could not be installed properly".
    However, Acrobat 10.0.0 launches and runs fine. Then, I try to move on and upgrade to 10.1.4 (or even 10.0.1) and no matter whether I uninstall and reinstall, repair disk permissions, talk to Adobe support for four times now and let them try everything, I'm still getting Error 1301 "The update could not be applied because Adobe Acrobat application contents were modified since the original installation. I had them send me a hard copy of the CS6 Suite and reinstalled the entire suite. Again, ALL other apps run and upgrade perfectly EXCEPT Acrobat.
    Now, support tells me to use the "Run Repair Acrobat Installation to replace missing files." from this advisory and call them back later (file:///Users/mbp/Desktop/extras/maccomputers/Errors%20and%20freezes%20%7C%20Adobe%20Rea der%20%7C%20Mac%20OS.webarchive).
    Here's the latest hitch: There is no such:  "Repair Acrobat Installation". I'm thinking they think there is and there isn't.
    Also, in details this:
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW006, DW050 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 4 error(s), 0 warning(s)
    ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ----------- Payload: {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro  10.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Acrobat Professional: Install failed
    ERROR: DW050:  - Acrobat X Pro : Install failed
    Any wisdom out there which is not in the "experimental" arena would be appreciated.

    Hi,
    Thanks for the advice. Tried this and does not work. Exact same results. I really wonder if I am the only person with a MacBook Pro Retina with an 512GB SSD running Mountain Lion that has tried to install Acrobat 10.0.0. I think there is some conflict with Mac OS 10.8.2 that is hostile to the installation sequence Adobe created for Acrobat. I fear Adobe would rather I upgrade to Acrobat X1 than spend their time patching this.
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW006, DW050 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 4 error(s), 0 warning(s)
    ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ----------- Payload: {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro  10.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Acrobat Professional: Install failed
    ERROR: DW050:  - Acrobat X Pro : Install failed

  • I keep getting the "some items could not be found" error.

    I keep getting the some items could not be found error for some podcasts I downloaded then deleted. Unfortunately, now, I can't get rid of the error message. So I'm trying to search for said podcast to re-delete the entry. And it's not there. And I can't find it anywhere else. How can I fix this?

    Another user named Springbk posted a fix that worked for me as I was having the same problem today:
    I Changed my DNS settings to OpenDNS
    On a Mac go to SYSTEM PREFERENCES>NETWORK>ADVACED>DNS
    change DNS by adding ( + )
    208.67.222.222
    then
    208.67.220.220
    click okay/apply after. then try the update. after the update, just delete the two open DNS server numbers. should revert back to your old one.

  • Macbook Air 10.8.2 crashes after update. Gave a message "Some updates could not be performed due to an error"

    3 of our mid 2012 Macbook Airs10.8.2 crash after update. Gave a message something like this "Some updates could not be performed due to an error" and now when rebooting I see panic...Unable to find driver for this platform...
    I don't want to udate any more of these (I have 31) until I know what is causing this problem. Will I have to reimage these machines?

    If you don't already have a current backup, back up all data, then reinstall the OS. You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used to upgrade.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.

  • I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

    I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged.  To create a PDF document, go to the source application then print the document to .pdf"  I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file.  After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared.  How do I resolve this problem?

    I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
    the log says the bellow details...what's the problem and how can i resolve it? thanks.
    %%[ ProductName: Distiller ]%%
    %%[Page: 1]%%
    %%[Page: 2]%%
    Cambria not found, using Courier.
    %%[ Error: invalidfont; OffendingCommand: show ]%%
    Stack:
      %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

  • Error: Your request could not be completed because a failure occurred while the report was being processed.

    Post Author: sagimann
    CA Forum: Deployment
    Hello,
    I'm not sure if this is due to bad deployment, but I suspect it is, at least due to bad environment.
    My env is:
    Solaris 10 64 bit
    Oracle 10g client installed under /opt/oracle/app/oracle/product/10.2.0/client_1
    BOXIR2 + FP2.6 installed under /opt/reporting, running under user 'bouser'. by the way, 'tnsping' works via that user.
    Important bouser env:
    ORACLE_HOME=/opt/oracle/app/oracle/product/10.2.0/client_1
    TNS_ADMIN=$ORACLE_HOME/network/admin
    LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32
    I reboot the box, then start BO like so:
    cd /opt/reporting/bobje
    . setup/env.sh
    ./mysqlstartup.sh
    ./startservers
    ./tomcatstartup
    Then, I import a BIAR file with some reports, and whenever I try to open any report via infoview, I get a gray error message INSTEAD of the input param form:
    Error:
    Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator.
    This does not occur in our BOXIR2 on Windows, which is why I'm guess it's a deployment/env issue. The main obstacle I have is: how do I diagnose this? there's nothing in the bobje/logging folder, nothing in the /var/adm/message file except for the following line:
    May  5 15:23:23 testbox1 boe_pagesd[3865]: [ID 253862 user.error] A failure occurred while the Page Server was processing report 'test report' (id=777) for user Administrator
    pls advise,
    thank you.

    The solution is to turn off the printer preference (bottom of Page Setup screen) in the Crystal Report before uploading to the Server. Thanks to: http://pinchii.com/home/2011/12/error-adding-reports-to-crystal-reports-server/
    The explanation, from a comment in the above linked blog post:
    "To elaborate more on the error, what basically happens is that the Crystal Reports engine tries to get the status of the u201Creport printeru201D aka u201Cdefault printeru201D which was present on the system when the report was created, but the printer does not exist anymore. This causes the Crystal engine to error out. By setting the report to u201CNo Printeru201D, it tells the Crystal Engine not to look for that report printer when opening the report."
    Edited by: abirdman on Feb 3, 2012 9:49 PM

  • ITunes error message / "iTunes could not connect to the music store...

    The past week, I have been having problems connecting to the iTunes music store. I purchased my ipod in 10/05 and have had no problems until recently. I keep receiving the following error message:
    "iTunes could not connect to the music store. Network connection was refused. Make sure your network settings are correct & network connection is active, then try again."
    I went onto the website, and checked various things. I uninstalled and reinstalled iTunes and the software, checked to see if I have any firewalls (none), checked to see if I have Windows XP service pack 2 (I have 1), and contacted my ISP (AOL). Help! I have AOL 8.0 dial up, and have had service with them for a couple of years now, so that is not an issue. Per AOL, I tried uninstalling AOL adapter and restarting my computer, and also deleting cookies and deleting files/all offline content, defaulted my security settings (they were the same), and reset web settings. I have restarted my computer, but am still having the same issues. I already contacted iTunes about this issue, and they sent me the same email twice, with the same instructions as their website, which I indicated I already tried numerous times. I have also checked my connections, and everything is fune. I try to access iTunes after logging into AOL.
    Thank you in advance to everybody that responds.
    Emily

    Thanks for the input. Unfortunately, I keep trying to do that, and have not been able to download for about a week. After contact customer support, I received the general "technical support" email, which is the same information found on the website. After replying to the email, which stated that I tried already tried the methods listed, I received the same email again. After replying to that email which included the previous threads, I received an email stating that the deparment I replied to does not handle technical issues. So, tonight, I re-emailed them with all of the threads and asked for an explanation of why I received technical emails if they do not respond to technical emails. It will be interesting to see how they respond, although it will probably be some general email. I sometimes respond to member service emails at my place of employment, so I know the procedure. The bottom line is that I should receive answers to my questions, even if the answer is something along these lines:
    "I am researching your problem, and will contact you within the next xx hours/business days with a resolution. We value you as a customer, and strive to maintain excellent customer support and satisfaction. Thank you for your patience."
    Or, a similar response. I know there is a general response library. And, I also know that if some body is unable to answer a question, as customer support, they should try utilize their resources. Basically, be a problem solver.

  • PCUI error: Field group could not be read completely

    Hello,
    I am trying to remove some fields from the Sales Data tab in the Sales Orders application CRMD_BUS2000115. I have changed field groups before, noth in CRM 4.0 and CRM 5.0, but in this case, I always get this error.
    By going into debugging mode (tracelevel set to 2222) I determined the main field group to be SLO_SALES, with lots of smaller reference groups below. Whenever I change one of the reference groups and try to generate the layout of SLO_SALES I get the error "Field group could not be read completely". I even reverted all changes by emptying all the entries from the reference groups so that my c-tables are empty, but I still get the error. All field groups below this one yield the error "No field group selected in blueprint table", so I cannot build those either.
    Has anybody else tried to change the contents of that application in that tab?
    Regards
    Thomas

    Hi Thomas,
    Everytime you do changes in the reference group the entries in table 'CRMC_FIELDGRP' changes. So you will have to go to this table check entries for the main feild group 'SLO_SALES' in your case and then change entries for this feildgroup in CRMC_BLUEPRINT_C. The idea ia that the data should be consistent/same in both the places.
    Hope this helps you.
    Regards,
    Hetal.

  • Has anyone had the error "The file could not be read due to an error" when selecting ignore or replace image links. The linked images are in Dropbox if that helps.

    I am working on a Mac 10.9.5 with Adobe CS6. My files are locally in Dropbox but once we moved files to network and tried opening the AI - the file would not recognize the original folder location. I tried ignoring the missing images but then I receive the error - The file could not be read due to an error." The same error happens when I try replacing the first missing image. I know the problem lies in the images are linked back to my Dropbox but the AI file doesn't care since it won't let me replace or ignore the image links.

    Jasion,
    Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
    In addition to the (far greater) risk of file corruption, some issues are mentioned here:
    http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

  • Has anyone had the error "The file could not be read due to an error" when selecting ignore or replace? The linked images are in Dropbox if that helps.

    I am working on a Mac 10.9.5 with Adobe CS6. My files are locally in Dropbox but once we moved files to network and tried opening the AI - the file would not recognize the original folder location. I tried ignoring the missing images but then I receive the error - The file could not be read due to an error." The same error happens when I try replacing the first missing image. I know the problem lies in the images are linked back to my Dropbox but the AI file doesn't care since it won't let me replace or ignore the image links.

    Jasion,
    Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
    In addition to the (far greater) risk of file corruption, some issues are mentioned here:
    http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

  • The disk cannot be partitioned because some files could not be moved

    Hi guys,
    I removed my bootcamp partition to clear up some temp space and expanded the Mac OS partition up to the fullest size again using Boot Camp Assistant.
    The first thing I noticed was that when I restart to computer gets stuck on an ugly BIOS looking screen with a message something along the lines of "no bootable partitions could be found", Easy way round is to hold down the ALT key which brings up a sole Mac OS button to boot from.
    Now I try and make a little partition again using the assistant and it won't let me because it says "The disk cannot be partitioned because some files could not be moved". It then advises to back up the disk and use Disk Utility to format it as a single Mac OS Extended volume before restoring again.
    Is there anyway to fix this lot without going through doing this.
    Will Boot Camp Restore re-instate the OS as well as my user files?

    I had a similar problem when I undid my boot camp partition to make it larger. I tried to make it 50 GB which gave me the same error about the files not being able to be moved. I didn't get the "no bootable partitions" error. I changed the size of the partition to 47 GB and ran the boot camp assistant. It stopped while partitioning and I have to force quit to stop it. I restarted the assistant and made the partition a little larger to 48 GB and it partitioned finally. My suggestion is to ry adjusting the size of the partition and see if that allows you to make the partition at least. For you other problem, I'm not sure... From what I gathered from other forums, the drive might be fragmented which causes the partition error. There is no free defragment tool for mac (dunno why) but they exist.

  • ERROR: The operation could not be performed because the file can't be accessed or doesn't exist. Please contact your web developer to correct the problem.

    Only on one page, the client is receiving this error:
    Error - The operation could not be performed because the
    file cant be accessed or doesnt exist. Please contact your web
    developer to correct the problem.
    I tested it with a couple different usernames and a couple different browsers and it works fine on my end.. but none the less it is happening to him. This is the second time it happened to two different clients.
    ??? Any ideas ??? Anyone else had this happen?

    Here's the setup on the two machines in particular...
    Machine #1:
    XP Pro
    Was IE7, now latest FF
    No antivirus
    Firewall – Windows Firewall, Downloaded AVG free trial ver., but not installed
    Machine #2:
    XP Pro
    IE7
    Again, No AV… had Kaspersky… but uninstalled it
    Windows Firewall
    Maybe that could be of some assistance... not seeing anything that could possibly block or inhibit the ICE. Each machine is independent of the other, separate networks, different locations, JavaScript enabled, no cookie blockers, etc.
    ....STUMPED!!!   

Maybe you are looking for