Landed Cost not showing in Inventory Audit

I have a query that goes against the OIPF/IPF1 tables to locate all Landed Cost transactions for a particular item. To test/verify the query, I ran the Inventory Audit report for the item. There are transactions returned from the query that do not show in the Inventory Audit report. Is there any reason or circumstance under which a Landed Cost Transaction would not show in the Inventory Audit report. I checked against all warehouses. This does not seem to be a singular event in that I have found random occurences of this for different items yet the majority of the time the Audit Report returns all entries.

Dear Cristian
Please check the Following things.
1)First check audit report for a Single Product.
2)Select all warehouse in Audit report.
3) Check you landed cost entry if your JV not pass in landed cost, so landed Cost not reflected in you audit report. (Auto JV not pass in SAP 2005 Version)
Please check and Let me Know.
Regards
Mangesh Pagdhare.

Similar Messages

Router 7606 does not show the inventory for the Fan module

I have a issue with a router 7606, specifically with fan module, the LC go down because it does have sufficiently cooling , I changed the Fan module, the IOS, The power supply, and I still have the same issue, Besides the Router does not show the inventory or PID for module fan,
logg" system minor alarm on operating fan count"
Someone knows what could be happening,

Check this:
Can you try this;
7606-01#show environment status fan-tray 1
fan-tray 1:
fan-tray 1 type: FAN-MOD-6SHS
fan-tray 1 mode: Auto
fan-tray 1 fan-fail: OK
7606-01#show power
Fan Type Watts A @42V State
1 FAN-MOD-6SHS 180.18 4.29 OK............................ FAn try
If above doesnt work then try the below link:
https://supportforums.cisco.com/discussion/10824271/7606-s-and-fan-module-6shs-version-1
HTH
inayath
*Plz dont forget to rate if this info is helpfull.

Non-cumulative Values not showing in Inventory Management Queries

Hi:
Has anyone had a problem with the new version and Non-cumulative key figures not showing up in Bex for Inventory Managemet reports? Specifically, they showed and validated back to ECC for our Development and QA boxes but now in our Regression box they are all showing zeros. Our Cumulative values are all showing correctly still within the Regression box. For example, Total Receipts and Total Issues are correctly poplating values but Total Stock is not.
I have checked and validate that the configuration in the Regression box matches or Dev and QA box.

Found the problem. It had to do with the compression variant in the delta process chain. The compression was set to 'no marker update'. Since we only started receiving measureable deltas in or regression box this is where the incorrect setting showed up. Reinitalized and the deltas are working correctly now.

CPr-PS integration - cProjects costs not showing up in PS

Hi,
We are on PPM5.0. Accounting integration results in successful replicaition of cPro structure as WBS in PS. However, the costs do not flow.
We have used PS06 (ECP) as the costing variant. All configurations seem to be done, and yet, we do not see the costs replicating.
Additinal Information:
We are not using "Org" structure. We understand that "Cost Element" and "Activity Type" aligned with the cost/revenue rate is all that we need to maintain for costing to take place.
Please advise on what we might be missing.
We are able to replicate all accounting charateristics including cost/rev rate, and project type to the ERP system.
The costing variant has been defined as PS06 (both under "Create and Change controling scenario", and "Settings for "Easy Cost Planning"). And yet, when we click on the "costing" button (under the "accounting" tab), we get the following warnings:
- Error occurred in controlling cockpit (and yet we see nothing in COCPCPR)
- Costing data may not be up to date
Please advise.

HI Deepak
Please advise how you got the planned costs to show up in PS.
I face the same issue now.
I have exactly the same settings as you have PS06 on both sides.
However, when i look at ECP in PS, it requests a planning form and no planned data is being pulled through, its just blank.
I am not sure what i could be missing, is a costing model mandatory ?
Please advise soonest.
thanks
Ihsaan Mayet

CProjects to IO, IO to RPM - costs not showing up

Hi,
Having created an internal order from cProjects, I can see the costs in IO.
To start with, costs from cProjects Role-Task assignment is all I am trying with (using role rates).
Simultaneously, I have created the Finance Categories, Groups, and Views in RPM.
I have tried a few juggleries to bring this cost under a finance view in RPM. Not through yet.
I have run the programs that fetch this IO cost into RPM. But the link doesn't seem to have been estd. and therefore, though the program shows all green, it says there's no cost in the db to fetch.
What all should I have completed before I get this through?
Thanks...

HI Deepak
Please advise how you got the planned costs to show up in PS.
I face the same issue now.
I have exactly the same settings as you have PS06 on both sides.
However, when i look at ECP in PS, it requests a planning form and no planned data is being pulled through, its just blank.
I am not sure what i could be missing, is a costing model mandatory ?
Please advise soonest.
thanks
Ihsaan Mayet

Landed Costs - Not Enough Data Message

Support,
When adding a Landed Cost into SAP 8.8 and using the 'Copy from' Goods Receipt PO, i insert an amount under the 'costs' tab and click on 'Add' I get the following message:
Not enough Data [Message 173-1]
Would anyone be able to shed any light on this message?
Juan

Solution found shortly after raising this thread. Problem was that the user had entered a zero valued PO and Goods Receipt PO.

Internal Activity Costs not showing

Dear all,
I'm creating a production order and all my work center activities are not being costed nor showing. I've made sure my activity types have "variable" rates from kp26 and I made sure they're assigned to the production operations and shown in the production order operations list.
I'm also facing this when I run ck11n.
What could possibly be wrong?

Hi,
A few quick checks
1. Check if the operation is relevant for costing (control key)
2. In KP26, click on the first icon at the left hand top corner & check if the rate is mentioned for the present month.
I suspect that the 2nd point could be the issue. Check & revert.
Regards,
Vivek
Added
Rafiq, you've marked the thread as answered, but not bothered acknowledge the inputs provided nor assigned any points. Great way to appreciate the forum members....!!!!
Edited by: Vivek on Jun 18, 2009 6:27 AM

ADF values not showing in inventory

I have a couple administrator defined fields (ADF) that seemed to be populated on the workstation (shown in %ZENWORKS_HOME%\work\inventory\*-cdflast.xml) but they do not appear in the Zenworks inventory report. Why would that be?
(ZCM agent v11.2.4)

Must I have "Launch Collection Data Form" checked in Inventory/Scan Now to get ADF into the inventory?

Premiere Pro Sequence Markers are not showing up in Audition CS6 anymore

Hello,
If you look in Audition Help "Working with video applications" you will find following sentence:
"Any sequence markers appear in Audition, and separate tracks can be retained for maximum editing flexibility."
http://help.adobe.com/en_US/audition/cs/using/WS58a04a822e3e5010548241038980c2c5-7e43.html
This is an very important feature which was working very nice in CS5.5. But now in CS6 not any marker in appearing in Audition.
Is it just a bug on my computer or in the software or does the feature not exist anymore?
I am working on Mac OSX 10.8.2
Thank you!

I'm using the following programs on Mac OS X Version 10.9.5:
Encore version 6.0.0.492
Premiere CC 2014 version 7.2.2
Media Encoder CC version 7.2.2.29
I'm having the same exact issue described above, but the xml in my .xmpses file does not match what you've listed above. The end of my .xmpses file reads as follows:
</stMkr:MarkerInfo>
        <stMkr:NMarkers>38</stMkr:NMarkers>
        <stCap:CaptureTimecode>
            <rdf:Seq>
              <rdf:li rdf:parseType="Resource">
                  <rdf:value rdf:resource="Capture"/>
                  <stCap:index>0</stCap:index>
                  <stCap:capturetime>00:00:00:00</stCap:capturetime>
                  <stCap:time>00:00:00:00</stCap:time>
              </rdf:li>
            </rdf:Seq>
        </stCap:CaptureTimecode>
        <stCap:NCapture>1</stCap:NCapture>
      </rdf:Description>
</rdf:RDF>
</x:xmpmeta>
</UserData></SessionFile>
And I can't find the "Duration>0</StreamDuration>" anywhere in my .xmpses file. Yet, I'm still getting the "Error parsing MPEG metadata file. Deleting or renaming "E:\YourVid\test.m4v.xmpses" will allow you to import, but any markers will be lost." message when trying to import as a timeline in Encore. Is there a new workaround that you know of? Thanks for any help you can give!

How to show the field Item foreign name in Inventory Audit Report

Hi
I can't find the field Item foreign name showing in Inventory Audit Report.I want to link with the table OITM in PDL in order to show Item foreign name in paper report,but whatever I do, it seems doesn't work.
plz tell me how to do .thx.
Edited by: Kam on Mar 13, 2009 10:37 AM

ALD - Advance Layout Designer
QLD - Query Print Layout Designer
You could search the forum for the links to those two tools.
Thanks,
Gordon

Inventory Audit Report Vs Stock Ledger

Dear All,
While doing the A/P Invoice, Tax portion is not including in Inventory Audit Report. Below is the Case
1. Added GRPO with TAX
        Ex : 10 Qty * 10.00 =100.00 @ VAT4% =104.00
                  Stock 100 Dr
                  GRNI 100 Cr
2. At A/P Invoice I have changed VAT4 as VAT0 & that amount I had included in Base Price since in GRPO, Tax portion is taken by mistake.
                  Vendor 104.00 Cr
                   GRNI    100.00 Dr
                   Stock      4.00 Dr
But while checking in Inventory Audit Report that VAT amount is not reflecting in Stock G/L but in Ledger its showing. Due to this my Stock Ledger is not matching with Inventory Audit Report.
Can any one tell me why this is happening................. & how to rectify.........
Thanks in Advance
Chakrapani Bandaru

hi Chakrapani,
In A/P Invoice generally , the rounding amount hits the stock account.
I guess inventory revaluation will help you in this because Finished Product is an offset account to STOCK REVALUATION LOSSES AND GAINS ACCOUNT IN THIS TRANSACTION.
Try this in demo DB.
thanking you
Malhaar

Item cost not found for one or more items - Inventory Posting

Good Day Mentors,
My user has encountered an error during Inventory Posting and its "Item cost not found for one or more items".
The specific Message ID from SAP's System Message Log is 10001287.
I found a similar post which addresses this error here.
But unfortunately it did not help me solve my user's problem.
I already checked if the items had a defined "Item Cost" in the Item Master Data Inventory Tab, and they all have "Item Cost" defined.
I'm not sure if this will help, but below is the Inventory Audit Report of one of the items that is throwing the "Item cost not found" error.
I am not a business consultant neither am I literate in accounting, so thanks for the patience.
SAP Version: 9.0 PL5
Valuation Method: Moving Average
Thanks in advance!
Sean

Hi Augusto and Raviraj,
I've already verified in our production database the points you made:
- Is the "Manage Item cost per warehouse" selected in the Basic Initialization Screen?
YES
- Is the "Manage Inventory by Warehouse" ticked/checked in the "Inventory Data" tab of the "Item Master Data" screen?
YES
* I apologize for not have been able to give this information upfront.
Anyway, the database only has one warehouse at the moment.
I've checked the items, like the item in the screen shot above, and it does have an item cost.
Below is the screenshot of the sample item from my original post,
Thanks in advance!
Sean

Inventory Audit Report - Not followed FIFO and Batch management

I have created an Item say XYZ, with Batch management and valuation methode FIFO.
Then I have created a batch say 1 with posting of opening balance transaction with posting date as 1st April 2009.
Now when I post an A/R Invoice with posting date as 19th May 2009 in which I have selected above batch.
I have also posted some more purchase transaction for same item before 19th May 2009 that is the date of sales invoice.
Now when I see Inventory Audit Report, system has not picked up the cost column as per Batch selection in A/R Invoice, and also not as per FIFO, but it has followed the system date of transaction for deriving cost as per FIFO.
Can anybody throw light on this ?
BR
Samir Gandhi

Dear Samir Gandhi,
Irrespective of posting date you use for document posting, with FIFO Method system will arrange all the inventory posting in layers with First inventory posting will form the base for first inventory movement out and so on
Example:
1st Entry:(Opening Balances)
posting date : 01/04/09    Item : XYZ    quantity : 5   Unit cost price : 100
2nd Entry: Purchase
posting date : 01/05/09    Item : XYZ    quantity : 5   Unit cost price : 105
3rd Entry: Purchase
posting date :25/04/09    Item : XYZ    quantity : 5   Unit cost price : 90
Layers created :
1.    Item : XYZ    quantity : 5   Unit cost price : 100
2.     Item : XYZ    quantity : 5   Unit cost price : 105
3.     Item : XYZ    quantity : 5   Unit cost price : 90
4th Entry : Sales
Item : XYZ    quantity : 8
So here cost of goods sold will be : ( 5x100)+ ( 3x105) = 815
and it wont be ( 5x100)+ ( 3x90) =770 if that's what you are expecting
Regards,
Mukesh

Landed costs can not get Goods receipt PO when Goods return made

Hi, everybody
I need to calculate landed costs and it seems that I can not use when I built a Goods return.
My procedure as follow ( ps: the same vendor number)
1. created a PO then Goods receipt PO (docNum says 1111) which included 20 quanties for item no AAAA.
2. created a Goods return which Copy from Goods receipt PO no: 1111, which included 5 quanties for item no AAAA.
3. next, I try to caculate my Landed costs. I open a new Landed costs and click the button "Goods Receipt PO", but I can not find any Goods receipt PO no: 1111.
What can I do to caculate my exactly landed costs & Goods receipt PO no: 1111 that included 15 quanties?
Thanks for your help

When you only Returned partial goods from your Receipt. The Receipt should still be open and you should be able to process the Landed cost. I am not sure why the GR is not showing in the landed costs window.
Please check if the GR is closed by an AP Invoice / by itself.
Otherwise, you will need to process AP Goods Return for the remaining 15 and process a New Goods Receipt for 15.
Regards
Suda

Customer wants Inventory Transfer to associate Freight/Landed Cost to Items

This is the situation:
SAP B1 customer wants sells items from warehouse 01 and warehouse 02. Warehouse 01 on eastern side of Canada and Warehouse 02 on Western side.
They would like to transfer certain items to warehouse 02. However, it involves Freight or Landed Costs associated.
The customer may adjust the price of items transferred to 02 or and if they don't they atleast would like to know whether they are taking a loss in selling the transferred items from warehouse 02.
In order to know the cost of items or associated cost with the items in 02, they need to track Freight or Landed costs associated with the transfer to western Canada.
Inventory Transfer does not allow us to associate any shipping charges? or am I missing something here?
Associating shipping charges with inventory transfer seems like such a natural act of transfer through Trucks? why isn't it associated with inventory transfer function in SAP B1?
As usual appreciate all your help?
Thanks.

You may check this thread to have a work around:
Re: Is it possible to have Freight for Stock Tranfer between Warehouses?
Thanks,
Gordon

Landed Cost not showing in Inventory Audit

Similar Messages

Maybe you are looking for