Language Field Error

HI all,
While creating an Account in CRM 7.0 , we are facing an error" enter a value for field language according to ISO 639 ".
There are many language fields , i filled all but still...same error.
Your help is highly appreciated
Thnx
Chandu.

Hi Chandu,
Can you please suggest how did you reoslve this issue. I am facing same issue while creating Contacts. WEB UI screen is not changed and it's same as deliverd from SAP. When I try to add language "EN" for Contacts I get an error" enter a value for field language according to ISO 639 ".
I havn't tried to change the standard screen config by activating another langaue key for contacts.Do I need to add user parameter for language.
Thanks,
Rahul

Similar Messages

Error in creating InfoPackage "Assign a language field to IOBJ 0LANGU"

Hi Guys,
Im having a problem in B.I using tcode rsa1old .Upon creation of InfoPackage for IX_MAT_TEXT which is material name an error occur.
"Assign a language field to IOBJ 0LANGU; danger of short dump" . But when I create a IX_MAT_ATTR, no problem encountered.
How can I solve this? all are activated...
Please help . Will reward points.
Thanks in advance
aVaDuDz

Hi,
Please find the steps below:
1. Open the transfer rule and if it is language dependent then map it with appropriate field by selecting the language field and the field to be mapped and using arrow to map.
2. If it is not language dependent and you want to add EN as constant as mentione by Shashank above then, click on the "X" sign next to the field and once a pop up comes select the option "Constant" and there you add the value EN. save and re-activate the Info Source. It will work.
Please close the question.

Session variable causing ADODB.Field error '800a0bcd'

i have a page that before the session variable was added,
would display the
text i required if the recordset was empty.
Now i have a session variable on the same page and if the
recordset is
empty, instead of showing the text i need displayed, i get
the following
error:
ADODB.Field error '800a0bcd'
Either BOF or EOF is True, or the current record has been
deleted. Requested
operation requires a current record.
/Help_Desk/verified.asp, line 31
If i remove the session variable code from the page, it works
fine.....why
the conflicts?
<%Session("last")
=(rsVerify.Fields.Item("c_last_name").Value)%>
<%Session("first")
=(rsVerify.Fields.Item("c_first_name").Value)%>
<html>
What im doing is verifying if a user exists in the database.
If they do
there name is stored in a session and used later on the
following pages. If
they do not exist, they are suppose to receive a message
indicating to call
our support center to update there name...
I dont understand why the addition of the above two lines
cause this error

Here is all the code on the page... please let me know if
there is something
incorrect.....
<%@LANGUAGE="VBSCRIPT" CODEPAGE="1252"%>

<%
Dim rsVerify__varLname
rsVerify__varLname = "%"
If (Request.Querystring("last") <> "") Then
rsVerify__varLname = Request.Querystring("last")
End If
%>
<%
Dim rsVerify__varFname
rsVerify__varFname = "%"
If (Request.Querystring("first") <> "") Then
rsVerify__varFname = Request.Querystring("first")
End If
%>
<%
Dim rsVerify
Dim rsVerify_numRows
Set rsVerify = Server.CreateObject("ADODB.Recordset")
rsVerify.ActiveConnection = MM_USD_STRING
rsVerify.Source = "SELECT c_last_name, c_first_name,
c_middle_name,
c_email_addr FROM AHD.ctct WHERE c_last_name = '" +
Replace(rsVerify__varLname, "'", "''") + "' and c_first_name
= '" +
Replace(rsVerify__varFname, "'", "''") + "' and del = '0'"
rsVerify.CursorType = 0
rsVerify.CursorLocation = 2
rsVerify.LockType = 1
rsVerify.Open()
rsVerify_numRows = 0
%>
<%Session("last")
=(rsVerify.Fields.Item("c_last_name").Value)%>
<%Session("first")
=(rsVerify.Fields.Item("c_first_name").Value)%>
<html>
<head>
<title>Account Verification</title>
</head>
<body text="#000000" link="#0000FF" vlink="#0000FF"
alink="#0000FF"
leftmargin="0" topmargin="0">

<br>
<br>
<% If Not rsVerify.EOF Or Not rsVerify.BOF Then %>
<table width="605" align="center">
<tr bgcolor="#9999FF">
<td><strong>USD Name:</strong></td>
<td><strong><%=(rsVerify.Fields.Item("c_last_name").Value)%>,
<%=(rsVerify.Fields.Item("c_first_name").Value)%></strong></td>
</tr>
<tr>
<td><strong>First
Name:</strong></td>
<td><strong><font
color="#FF0000"><%=(rsVerify.Fields.Item("c_first_name").Value)%></font></strong></td>
</tr>
<tr>
<td><strong>Last Name:</strong></td>
<td><strong><font
color="#FF0000"><%=(rsVerify.Fields.Item("c_last_name").Value)%></font></strong></td>
</tr>
<tr>
<td><strong>Email:</strong></td>
<td><strong><font
color="#FF0000"><%=(rsVerify.Fields.Item("c_email_addr").Value)%></font></strong></td>
</tr>
<tr>
<td><strong>Location:</strong></td>
<td><strong><font
color="#FF0000"><%=(rsVerify.Fields.Item("c_middle_name").Value)%></font></strong></td>
</tr>
<tr>
<td colspan="2"><div
align="center"><strong>If all 4 fields above
contain
your correct information please select from the links
below.<br>
If your are missing any information above please contact the
help
desk
before proceeding.</strong> </div></td>
</tr>
<tr>
<td colspan="2"><hr size="1"> <table
width="400" align="center">
<tr>
<td><div align="center"><strong><a
href="/Help_Desk/usd_stores1.asp">Open
Store / DC
Request</a></strong></div></td>
<td><div align="center"><strong><a
href="/Help_Desk/usd_corp1.asp">Open
Corporate
Request</a></strong></div></td>
</tr>
</table></td>
</tr>
</table>
<% End If ' end Not rsVerify.EOF Or NOT rsVerify.BOF %>
<br>
<div align="center">
<% If rsVerify.EOF And rsVerify.BOF Then %>
<table width="605">
<tr>
<td><div align="center"><font
color="#FF0000"><strong>If you are
receiving
this message, chances are you are not completely setup in
USD.<br>
Please contact the help desk to have your information
verified and
setup
if needed.</strong></font>
</div></td>
</tr>
</table>
<% End If ' end rsVerify.EOF And rsVerify.BOF %>
</div>
<div align="center"></div>

</body>
</html>
<%
rsVerify.Close()
Set rsVerify = Nothing
%>
"Daniel" <[email protected]> wrote in message
news:[email protected]...
>i have a page that before the session variable was added,
would display the
>text i required if the recordset was empty.
>
> Now i have a session variable on the same page and if
the recordset is
> empty, instead of showing the text i need displayed, i
get the following
> error:
>
> --------------------------
> ADODB.Field error '800a0bcd'
> Either BOF or EOF is True, or the current record has
been deleted.
> Requested operation requires a current record.
>
> /Help_Desk/verified.asp, line 31
> -----------------------------
>
> If i remove the session variable code from the page, it
works fine.....why
> the conflicts?
>
> <%Session("last")
=(rsVerify.Fields.Item("c_last_name").Value)%>
> <%Session("first")
=(rsVerify.Fields.Item("c_first_name").Value)%>
> <html>
>
> --------------
>
> What im doing is verifying if a user exists in the
database. If they do
> there name is stored in a session and used later on the
following pages.
> If they do not exist, they are suppose to receive a
message indicating to
> call our support center to update there name...
>
> I dont understand why the addition of the above two
lines cause this error
>
>

Select the language field in the source system ?

Hi,
when I schedule the load for 0cust_sales_text there popups the message 'Select the language field in the source system -> Long text'.
Long text says: 'Either no language field is selected as a selection field in the source system KC1CL005 in DataSource 0CUST_SALES_TEXT, or the language field is not assigned to InfoObject 0LANGU in BW.'
In the DataSource there is not an object for language? I don't know what to do.
Tobias

Hello,
texts of 0cust_sales are not marked as language-dependent.
the psa tells me, which records are marked as error, but i don't understand it.
green     1     1     0009     03     MB     L605930     cust a
green     1     2     0009     03     XX     L605930     cust a
red     1     3     0009     04     MB     0000013081     cust b
red     1     4     0009     04     XX     0000013081     cust b
green     1     5     0020     01     MB     0000001570     cust c
green     1     6     0020     01     XX     0000001570     cust c
red     1     7     0020     01     MB     0000001571     cust c
red     1     8     0020     01     XX     0000001571     cust c
red     1     9     0020     01     MB     0000001572     cust c
red     1     10     0020     01     XX     0000001572     cust c
green     1     11     0020     01     MB     0000001578     cust d
The error messages say there were double records
Tobias

Making language field as optional in web UI

Hi guys,
I m having a situation that in the contact details of a indirect customer there is a field called Language,In sap r/3 while
maintaining the data for that field it is mandatory but in Web UI also it is showing as mandatory field,while editing the data and saving then it is showing a error message to maintain the data in the language field but the requirement is it souldn't be mandatory.
i checked in the properties of the field in the configuration tab i.e whether the mandatory checkbox is checked or not. but it is already unchecked.
comp- BP_CONT, View - BP_CONT/ContactDetails, Cnode- HEADER, Attribute-
struct.correspondinglang
if u have any solutions please let me know. Your help is highly appreciated.

Hi,
Could you tel me what you did to resolve this problem?
We have exactly the same issue.
thanks
Tim

How to adde New Language field value in CRM Business Partner Language Field

Dear all,
How can we add a new field value to the Business Partner Language field in CRM and ECC systems.
Your suggestions will be highly appreciated
Thanks
Sravanthi

Hi Shravanthi,
You would need to add the new language to table T002. Once this is done, it will appear in the drop down menus.
Regards,
Rishu.

Language field is not maintained in the source system

hi,
I had problem with 0ehs_actn_text data source. when i'm trying to pull data to BW it's saying language field is not maintained in the source system.
I check the datasource there is no language field in the extract structure. and No fileds are checked for slection. I found one field REFOBJ checked in the data selection tab of datasource. But the data not coming to BW side.
could anyone help.
regards
kumar

hi kumar,
Check in rsa6 TXTLG field should be there and it should not be checked in HideField Tab.. then only the data will populate to BW..
So make the things properly and once again replicate the data source in Bw side.. load the data..
other wise if u dont wanto the language field in Bw side goto infoobject maintanance uncheck the "TExt Language dependent" option in masterdata/texts Tab.. save and activate it.. load the data..
i hope this will help you..
Thanks..
ravi.p

Grey Out Language Field

Dear All,
Is there a way to grey out (disable) the language field in SAPGUI?
I don't want users to choose there language. I want them to connect whith the language I have set by default for them.
Many thanks for your help.
Best Regards
Edited by: David BROSSEAU on Apr 6, 2010 10:26 AM

Hi David,
Sorry, I can´t solve your problem, but maybe you can help me:
I am looking for a possibility to change exactly this language of the SAP-Gui. We are using the NetWeaver SAPSetup Deployment Tool. Do you have a hint how to set this language?
kind regards from Austria,
Andreas Tösch

Moving item Required field error message

How do you move the required field error message?
for example when a field is left blank and the page submits
a error message would populate right under the label and push the item(text box) to the right. Making the form look very ugly.
http://i.imgur.com/fCBZJ.png
*i want to move the error message box to the right or below the textbox or somewhere that doesn't push the item...
Edited by: PandaOracle on Jan 16, 2012 10:35 AM

That only moves the DML error messages
I kind of want to move the default error messages for the items. ( i dont see any message tab or anything in the edit page for items.)
Edited by: PandaOracle on Jan 18, 2012 7:31 AM

Missing Field error when modifying user Master Record

We are using our corporate LDAP to authenticate our portal users and do not have (nor do we want) write permission to the LDAP. We are using additional attributes (ume.admin.addattrs) to hold information pertinent to the portal. We are running into a problem though when required information is missing from the LDAP user master record. For example, if the users email address is missing, when we attempt to save a user's record with the additional attributes we need, the system responds with a "Missing Field" error message and will not save the additional attribute until the LDAP record is complete. Currently the only work around to this problem is to notify the LDAP administrators and have them update the record (not a high priority for them).
Is there a way to have the portal ignore incomplete records and just save what it has?
Thanks
Ken Burd

We are using our corporate LDAP to authenticate our portal users and do not have (nor do we want) write permission to the LDAP. We are using additional attributes (ume.admin.addattrs) to hold information pertinent to the portal. We are running into a problem though when required information is missing from the LDAP user master record. For example, if the users email address is missing, when we attempt to save a user's record with the additional attributes we need, the system responds with a "Missing Field" error message and will not save the additional attribute until the LDAP record is complete. Currently the only work around to this problem is to notify the LDAP administrators and have them update the record (not a high priority for them).
Is there a way to have the portal ignore incomplete records and just save what it has?
Thanks
Ken Burd

CS4 extended-Installation-English Language Pack error

i just upgraded from photoshop CS3 to CS4. The installation went fine, except a the end, an error message was in the additional info box, saying:
Adobe Photoshop CS4 English Language Pack
Error:
Error 2.
LangPack (English) for DeviceCentral
Error:
I tried running pshop and i got a message "miising components" and it wouldnt start. Tech support in India told me to uninstall CS3 and CS4, stop all startup items in msconfig, reboot and reinstall.
I got the same message. Tech support said they'd get back to me Monday, since there was no "official" tech support on the weekends. BTW, i was on with them for 4 hours.
Anyone have any suggestions. I noticed that even though i uninstalled pshop, bridge CS3 is still functioning.
Thanks
hal

Problem Solved:
I finally spoke to a US tech guy.
He acknowledged I had tried all the simple and radical fixes, so he suggested I upgrade to XP service pack 3 and also to download the CS4 extended again. I did both.
I used Beyond Compare to do a CRC comparison between the old and new Software which found no differences.
I restored my Ghost backup of C: from just before I had removed all the adobe programs, so the PC was back to the original setup before I had the installation problems.
Then I installed SP3, which went well and ghosted the PC again.
Then, just to increase the odds of a successful installation, I did an alt-ctrl-del and went to the processes tab and killed anything which seemed unnecessary (things I recognized, like anti-virus, Norton, update managers, etc).
Finally, I installed from the new download of CS4 extended.
It worked!!!!!!!
Hope this helps anyone with similar problems.
Hal

NO LANGUAGE Field in DATASOURCE

Hi
I dont have any Language Field in 0VENDOR_TEXT Datasource(Checked in RSA5) .So how do i add them Language field to the datasource??Would appreciate ur help at this time..
manythanks
arun

as far as i know vendor master data is language indepenent. so why would you need a language dependent extraction.
if you need it to have the language of the vendor as infoobject just enhance the structure and use the user exit to fill this field from table lfa1

Language Init Error (8020) when connecting to the DI

Dear All,
I've got the error message Language Init Error (8020) when connecting to the DI, I could not understand how could it be happened but I have tried to find the solution for it but still unsuccessful ? How to solve ? TIA
Rgds,
Edu

Hello,
This solution I've got from SAP Notes 854548 and I rewrite here as follows;
1. Rename the folder SM_OBS_DLL from the temp folder. If you can't find, try to go to start --> run and type %temp%.
Then you perform these steps :
   1. Uninstall the DI from the Add/Remove Programs window
   2. Reboot the computer
   3. Install the DI API once again
If you still can't have solution and the solution from Chris can't resolve too, better to escalate to SAP support.
Rgds,
JM

Output CURR/QUAN fields (error)

Hi,
When doing Extended check(SLIN overview) on a program, I got the following error.
Messages for Output CURR/QUAN fields(Error) -
"Use addition CURRENCY when outputting GV_FAMT
(The message can be hidden with "#EC UOM_IN_MES)"
Code written :
WRITE: / 'Total Amount Posted','$',GV_FAMT
GV_FAMT is a variable of type CURR(13)
Any ideas on the resolution?
Thanks in advance.

Hi bijay,
This is an EPC error.
It happens because currency and quantity fields are stored in a different way and presented in output in some different way.
So,it can be corrected by writing following line>>
WRITE: / 'Total Amount Posted','$',GV_FAMT *currency ekko-waers*
reward with pts if answered.
thanks and regards,
Anurodh

WRT54G Language Pack Error

I received a language pack error while trying to up grade a brand new
Router. It works fine even have a wireless printer port working with it
on Charter Cable modem. Problem is I cant access the printer setting
page through the internet. It partially loads but you can't do anything with it.
Is there a fix?

Might be I misunderstood you first. Sorry! If you are not able to see the setup page for this router properly, it can be an Issue with browser settings, Firewall or router’ firmware, So check the browser settings, delete all offline content, set the privacy and security to low and increase the size of temporary internet folder (from Internet Options). Disable all the firewalls and internet security software’s. If you need to upgrade the firmware on this router, as I mentioned earlier, you don’t need to login to the setup page. You can simply download the tftp.exe file and upload the firmware file through it.

Language Field Error

Similar Messages

Maybe you are looking for