Laptop to ultra 10 connection help required

Hi ,
I recently purchased a used ultra 10 for trying out , but i get no display on my monitor. I assume the display card is not working.
I would like to connect it to my laptop (IBM T42). I used hyperterminal along with a serial cable but i dont get any display on my laptop.
Can you guide me with which cable i should use (i dont know much about cables so pls try to elaborate for me.)
and do i have to do any other settings.
Any help is apprecaited

The Sun systems have a 25 pin female RS-232 connector while PCs have a 9 pin male connector. If you buy a Null-Modem cable you'll usually only find cables with 9-pin plugs on both ends.
If you want to solder the cable yourself you do not need to solder a "complete" Null-Modem cable; a so-called 3-wire cable is enough.
The pinning is:
PC (9 pin female)               SUN (25 pin male)
    2 (RX) ------------------------ 2 (TX)
    3 (TX) ------------------------ 3 (RX)
    5 (GN) ------------------------ 7 (GN)Typically the SUN has the following serial port settings:
9600 bauds, 8 bits/byte, no parity, 1 stop bit
Martin

Similar Messages

Connection help required

hi e1
i have developed a chat application to chat online through mobile
it is running perfect on my system
i installed it on my device
but when i try to connect through mobile
it gives a error
Connect SymbianOS error=-33: System error
it is server timeout error
i even increased tomcat server timeout in server.xml
but still same error
i am using HTTP Connection
please help me to come out of this problem(it is urgent)
thanks

hariii
i am facing the sam problem with Nokia 6600 some time before, its open the yahoo, google etc but not make a connection through my j2me application and through same error then i talked with operator and get a full GPRS support. Might be you also facing the same issue.
Ashish

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying "attempt to access invalid address" then "application not respo

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart

What is the size of your hard disk? PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine. Just a thought here.

Help required with (soundcard) connection / settings, thanks in advan

Help required with connection / settings between a Creative Sound Blaster Audigy Platinum EX (soundcard) and a Creative DTT3500 Digital (5. speakers).
The problem
No sound from any of the speakers. (Exception can plug in headphones at front)
Background
My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). However after reconnecting speakers and restoring the original settings I?m getting no sound from any of the speakers. I?ve followed all the available advice/instructions I can find on this website and manuals to no avail.
Set-up
Physical
(Digital DIN) Speakers/decoder amplifier (DTT3500) connected to the (digital out) soundcard (Audigy Platinum EX) using minijack to DIN cable. (As per instruction manual)
Software
Creative Audio Consul ? setting as per instructions, however have tried variations in vain. (Note: above tabs there is a select device box with SB Audigy [A0000] in it ? only option. Just wondering what [A0000] means?)
Your advice please. A simple step by step guide would be appreciated, many thanks in advance, Jon

"My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). "
Do you have the original installation disk?
If so, try installing THOSE drivers, ESPECIALLY if it worked before. Be sure to uninstall what is there now, first.
Its natural for most people to want the 'latest' drivers for their hardware. However:
After experiencing some difficulties with some CL 'updates' for certain products, I now avoid them UNLESS I am having a PROBLEM with the existing drivers.

I have an iphone 3gs it has been dropped i have connected it charge and its saying reactivation requiered then asks to connect to itunes when i connect it to the laptop it will not connect to itunes but i dont no why can anyone help plz

i have an iphone 3gs it has been dropped i have connected it charge and its saying reactivation requiered then asks to connect to itunes when i connect it to the laptop it will not connect to itunes but i dont no why can anyone help plz

Sounds like you broke it.

Shuffle makes laptop restart!!! HELP!!!!

I got my boyfriend a second generation shuffle from apple.com for Christmas. He has an Acer laptop, with all of the needed requirements for the shuffle to work. After reading the "manual" (if you can even call it that) that came with the shuffle, he went ahead and downloaded the latest version of iTunes from the Apple website. The manual then said that after you download iTunes, you connect your shuffle, so we did just that. When we did that, his laptop screen went black, and then restarted!! He has 4 USB plug-ins on the back of his laptop, and we tried all 4 of them and got the same result. After getting really annoyed, we decided to try my laptop. I already have an iPod mini, so I thought that for sure it was going to work. I plugged in his shuffle, and nothing happened. iTunes didn't open like it did normally for my mini, and I didn't even get an icon in the task bar saying that they found new hardware. My computer didn't recognize anything. I've read the manual on the Apple website, and looked over the FAQ's and Troubleshooting Tips numerous times to no avail. I even registered his iPod on the Apple website, and that didn't help either. I am at a loss at what to do! I also got him a portable charger. When I plug it into the charger, nothing happens either. Do you think that his iPod has a faulty USB? I didn't purchase a warranty or anything, so I'm not sure what to do now, because I feel like I've done everything possible! Should I just give in and take it to CompUSA? Will they even fix it there since I didn't buy it from them? Is anyone else having this sort of problem?

Return it for a replacement...Your Shuffle comes with a one year warranty. NO ONE fixes Shuffles, they just replace them

My new ipad is showing the message 'Use wi fi to restore - A wi fi connection is required to download your apps and media' then gives 2 buttons

I had my ipad replaced last week. The apps etc were transferred to the new ipad and it worked fine for a couple of days. This morning the screen locked up and displayed the message - Use WiFi to Restore- A wi fi connection is required to download your apps and media. Then gives a choice of two buttons - Later or Use Wifi. Absolutely nothing happens when you press these buttons, the whole screen has locked up and it can't even be turned off. If you hold the off button down then eventually the slide to power off button appears but nothing happens when you swipe it. Help!

Hold down the home button and power button at the same time, ignore the power off slider until the Apple logo appears.

Help required network configuration - Gateway route settings get erased on reboot.

Oracle Linux 7
Linux myhostname 3.8.13-35.3.1.el7uek.x86_64 #2 SMP Wed Jun 25 15:27:43 PDT 2014 x86_64 x86_64 x86_64 GNU/Linux
#cat /etc/sysconfig/network-scripts/ifcfg-eno16780032
TYPE="Ethernet"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
NAME="eno16780032"
UUID="2d1107e3-8bd9-49b1-b726-701c56dc368b"
ONBOOT="yes"
IPADDR0="34.36.140.86"
PREFIX0="22"
GATEWAY0="34.36.143.254"
DNS1="34.36.132.1"
DNS2="34.34.132.1"
DOMAIN="corp.halliburton.com"
HWADDR="00:50:56:AC:3F:F9"
IPV6_PEERDNS="yes"
IPV6_PEERROUTES="yes"
NM_CONTROLLED="no"
#route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         34.36.143.254   0.0.0.0         UG    0      0        0 eno16780032
34.36.140.0     0.0.0.0         255.255.252.0   U     0      0        0 eno16780032
169.254.0.0     0.0.0.0         255.255.0.0     U     1002   0        0 eno16780032
When I reboot the machine, the first line in route table gets erased, I then run:
#route add default gw 34.36.143.254
After which network works fine.
Help required. I don't want to use NetworkManager.

The following might be useful:
https://access.redhat.com/solutions/783533
"When transitioning from NetworkManager to using the network initscript, the default gateway parameter in the interface's ifcfg file will be depicted as 'GATEWAY0'. In order for the ifcfg file to be compatible with the network initscript, this parameter must be renamed to 'GATEWAY'. This limitation will be addressed in an upcoming release of RHEL7."
NetworkManager is now the default mechanism for RHEL 7. Personally I don't quite understand this, because as far as I can gather it is a program for systems to automatically detect and connect to known networks. I think such functionality can be useful when switching between wireless and wired networks, but for a server platform, I wonder.

IPad Air - The connected device requires too much power.

When connecting my iDJ Live II to my new iPad Air I receive the following message:
Cannot Use Device
Numark iDJ Live II: The connected device requires too much power.
The iPad Air is running iOS 7.0.4, I also have an iPhone 5S, iPad Mini and iPad 2 all running latest iOS 7.0.4 and this dj controller runs on all these models. I know about the 20mA output limit on these other devices but they all still work why not the iPad Air? What has changed?
I am very disappointed with this restriction as the only reason I bought the iPad Air was for the better processing power and 128gb storage to fit all my music on there to use this dj controller with djay 2 and vjay. Now I have spent $900 on something I can not use as intended.
Please any help would be appreciated.
Thanks
Adam

Try giving your iPad a reset. See if it can clear up the error or if it repeats. Hold down the sleep and home keys until it reboots then try again.
How does this device plug in? Via the lightning connector or the USB part of the camera kit? If it's USB then sometimes a powered USB hub can help with the power issues.
If it's lightning then the issue could be related to something that came with iOS7. Due to so many unauthorized lightning cables, iOS7 activated software that looks for a code broadcast by the chip in the lightning connector. Authorized manufacturers have codes that the software sees, unauthorized ones don't. Usually people using unauthorized cables get a specific message, however it could be possible that this new part of the software is affecting other things connected to the lightning port.
Have you looked on djay's site to see if others are having issues or if they have fixes?

I have mobile internet at the moment via a USB stick in my laptop. Can I connect my Timecapsule with a cable to this laptop and make it into a wifi station??

I have mobile internet at the moment via a USB stick in my laptop. Can I connect my Timecapsule with a cable to this laptop and make it into a wifi station so that I can use my iPad?
THanks for your help!

for #1
Frequently asked questions about Apple ID - Apple Support
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
for #2
Apple does not accept unsolicited ideas see Apple - Legal - Unsolicited Idea Submission Policy

Just installed Premiere Elements, tring to register I'm getting this message:Either your computer is offline or the clock on your computer is set incorrectly, causing a connection error. An Internet connection is required. Please connect to the Internet o

Just installed Premiere Elements, tring to register I'm getting this message:Either your computer is offline or the clock on your computer is set incorrectly, causing a connection error. An Internet connection is required. Please connect to the Internet or adjust your clock and try again.". Have tried all suggested steps, no problem registering PSE one month ago. Win 7 system. Is there a solution?

Laurenceb70597335 you can find details regarding the activation process at Activation & Deactivation Help. This includes details on how to activate and deactivate Premiere Elements.

Grrrrrr MP54G2 wont connect, help and its saturday night.

Gonna keep this short, as dont want you falling asleep on me.
This is my first insight in MSI world and problems,,,,
Got this MP54G2 card in my dell laptop and it wont connect. Just done a new xp install, with drivers in all.
Running a linksys WRT54GS which works fine on laptop with CAT5 connection and did previous on old laptop with Netgear PCMCIA.
Help????
Will post from CMD line, but how you copy and paste from in please?
Thanks people, i dont want to have to be forced to use a pcmcia card and bin this mini card.
Tried to not use windows to manage it? ie use the msi software, changed channel in MSI software to channel 10. It cannot see any networks at all, but couuld previously see neighbours with netgear pcmcia.
Note, I had this mini pc card working before i reinstalled xp, but doesnt now.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Pindes>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : pinds
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : 802.11g MiniPCI Wireless Network Ada
pter
Physical Address. . . . . . . . . : 00-13-09-F5-76-CC
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom 570x Gigabit Integrated Con
troller
Physical Address. . . . . . . . . : 00-19-41-50-13-GF
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 194.168.8.100
194.168.4.100
Lease Obtained. . . . . . . . . . : 20 August 2005 18:43:17
Lease Expires . . . . . . . . . . : 21 August 2005 18:43:17
C:\Documents and Settings\Pindes>

Have you tried any later drivers (found here)? Do you know if MSI actually makes the wireless part (MSI sometimes just brands another companies product)?
As far as answering so late, it depends on where you are. This forum is world-wide. Right now it as actually 2:48PM (compare to the time it says my post was made above). So while all the Europeans are (supposed) to be asleep the americans are chugging away.
Good Luck
Jeremy

TS1368 iPhone can't connect to iTunes even though laptop recognizes iPhone is connected

All of a sudden, my iPhone 5 and iPad mini won't sync with iTunes. My windows 8 laptop recognizes they are connected when i go into My Computer but no syncing happens and no devices are shown in iTunes. Any help please?

Id follow this guys idea, check for updates in itunes. In order to use the iphone 4 now that it comes with ios 4.3 you have to have itunes 10.2. As for the person who resolved it by removing the battery, i think you posted in the wrong forum becasue that answer is completely useless for an iphone(cant remove the battery without taking phone apart, defiantely not a 20 second solution).

HT2204 I have changed my email address which i have successfully done on my laptop, however when I connect my iphone it still has my old email address and of will not acceprt either my old password or new password.Do I have to unistall itunes and reinstal

I have changed my email address which I sucesfully did on my laptop,however when I connect my iphone it still has my old email address and will not accept either my old or new password.Do I have to uninstall and reinstall again.Please help.Any suggestions.Regards Mark

Settings > Store > Sign out.
Sign in with the new credentials.

Is there a way of transferring information from word processing apps to a laptop that is not connected to the Internet?

Is there a way of transferring information from word processing apps to a laptop that is not connected to the Internet?

Yes - but - you need an app that supports file sharing and you still need iTunes on a computer, or you need an app like Folder Plus that lets you mount the iPad like a USB drive. You need the helper app on the computer as well.
iOS: About File Sharing
File Manager - Folder Plus for iPhone, iPod touch, and iPad

Laptop to ultra 10 connection help required

Similar Messages

Maybe you are looking for