Large cradle to fit iPhone with a case or cover?

I have an ifrogz case on my new iPhone. However, now it does not fit into a charging cradle that I had hoped to use; none if the inserts are large enough to accept the iPhone with the case on. Does anyone know of a cradle type charger that has a larger "mouth" for this purpose?

I'm not familiar with your case specifically, but I had the same problem using any of the cases I liked. Your best option is to either use the Apple Universal dock and just don't use any of the inserts or you can use the Griffin Powerdock 2 without any of the inserts. The Griffin is actually much cheaper. It doesn't double as a sync cable, but I don't use mine for that anyway. The Apple universal dock plus a power plug is $49 + $29 = $78 while the Grffin is $24.99.
With either one, just leave out the inserts for the iPhone. It could potentially be hazardous as you don't really have any support around the phone, so if you pushed it back really hard you might snap off the part that plugs into the phone, but I still think that could happen if you have the little plastic adapter in there for support.

Similar Messages

Can an iphone with a case fit in the michael kors wallet clutch?

can an iphone with a case fit in the michael kors wallet clutch? I was thinking of getting it but I do not want to take my pittsburgh penguins case off just so it can fit inside of it.

Yes I saw that article from before. The problem I am having is one that is unique to the PowerMac G5 and does not effect the Mac Pro. The problem I am having is that the PowerMac G5 uses a plastic shield that won't close when you install an Accelero. In order to get this card to work some people have even cut a hole into the shield as you can see with the first picture from this article:
http://www.xlr8yourmac.com/Graphics/AcceleroS1R2on_ATIX800.html
Needless to say I feel very uncomfortable doing this. This is why when I came across an article that showed people bending their Acceleros it gave me hope that I could install one with out having to damage my computer and risk having air flow problems. That is why I am wanting to know if bending the Accelero would work like in this forum:
http://www.silentpcreview.com/forums/viewtopic.php?t=46721

Iphone with bumper case and connector cable

I recently purchased the iPhone 4 and gave my wife my 3G. I had a couple of cables that I use on the 3G for my car and at the desk. I attempted today to charge the iPhone 4 while on a trip only find that the cables that I have for the 3G will not fit into the iPhone 4 which has the bumper case. The opening on the case is smaller than the plastic insulator on the connector.
Fortunately I brought the one that came with it, which normally stays on my desk, along on the trip and was able to charge it without taking the case off. But now it appears I'll have to purchase another cable for my car charger.
Has anyone else experienced this problem?

I made the same discovery on both my iPhone4s. It would fit on my SkyDock either. So I was able to successfully Dremel both of them for a secure fit. It only takes about 15 minutes of careful work to get them modified for greater charger compatibility. Not sure it wasn't intentional to increase aggregate charger sales.

Cradle for iPhone with protection?

Purchased an iphone cradle to charge and sync my iphone, but it doesn't fit with the protective casing I have.
Wondering if there are any cradles out there designed to fit iPhones with these cases. Can't seem to find one.
Thanks!

Since each case has different dimensions, that would depend on the specific case, don't you think? (Any reason why you're keeping the case model a secret?)
Some cases like various SwitchEasy models come with an adapter to use in the Apple Universal Dock. Some cases have a removable lower section so that you can use the standard dock.
Message was edited by: modular747

Looking for a vertical holster that will fit an iphone with a silicone case on it

As above..I had ordered a vertical leather holster ahead of time. It's nice but it won't fit the iphone with the case on it. I had to use the case as I get dropped calls without it..Any suggestions appreciated..thx

I got the Splash Alpha II, check it out.

Best car mount for iPhone WITH case

ive tried car mounts in the past and some worked fine...until I got a case for my iphone. lots of mounts have custom fitting so that it will fit the naked iphone just fine, but i need one that works with my case on it. so i guess just an adjustable one would be good...being able to turn it to landscape would be nice as well. anyone have suggestions?

yeah but this is a custom holder for a "snug" fit...which is my problem. snug fit = doesn't fit if you have a case around your iphone. so i need one thats adjustable. im looking on amazon now and some of the reviews are so-so...so i was just wondering if there was a definitive iphone case out there.

Belt pouch which is a snug fit for iPhone with the bumper on?

I'm looking for a belt pouch which is exactly the right size for an iPhone with the Apple bumper on. A snug fit would be preferable because it works better when silent mode is on.
Probably a better question is - is there another phone which is the same size as an iPhone with the bumper on? Then I can look at cases designed for that phone.
Thanks for suggestions.
Message was edited by: jthg

I don't know if this is the type you're looking for, but an iPhone 4 with a bumper should fit well in a MOBO horizontal slim case.
http://www.amazon.com/Mobo-Slim-Horizontal-Carrying-Case/dp/B003RD6466/ref=cmcr_pr_producttop
BTW, I bought mine at an AT&T store, but Amazon has them for a lot cheaper. I had a soft plastic case with a back and it fit snugly in the MOBO. I am now using the free acrylic case with a back, because it is easier to out of the MOBO (smoother action).

HT1665 I have the iPhone 4S and would like to purchase docking device6. I have the Otter Box Camo case and would like to know which dock will work with the case ON. Thank you.

I have the iPhone 4S and would like to purchase a docking device. I have the Otter Box Camo case and would like to know which dock will work with the
case ON. Thank you.

it might be better to contact otterbox to find out from them what they made it compatible with.

Car charger doesn't fit with bumper case!!!!!!!!!

Hi
Just got my new bumper case on the free offer and it look great BUT my car charger doesn't fit with the case on ( I have tried 2 different types)
The house charger fits fine.
The car chargers were bought of the net, will I need one form the apple store to get it to work.
Has anyone esle had this problem?
This is my first I phone and its brilliant but this case fiasco is annoying!!!!
Cheers Sandy

Hi,
This is an unfortunate fact. Some aftermarket products don't fit. I have an iTrip and I had to modify the plug to fit in. Simple with a dremel tool. File will work too. Cheaper than buying a new charger/FM transmitter.

TS1389 I cannot sync my iPhone with iTunes for Windows. Even if the computer is authorized, it keeps on displaying an error message that tells that this computer is not authorized. I already tried to do the resolutions you have given in case this situatio

I cannot sync my iPhone with iTunes for Windows. Even if the computer is authorized, it keeps on displaying an error message that tells that this computer is not authorized. I already tried to do the resolutions you have given in case this situation happens.

It's an endless circle.
See if these instructions help: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

Does an Iphone with mophie juice pack plus fit in the tigra bike mount?

Does an Iphone with mophie juice pack plus fit in the tigra bike mount?

Hello KThomLV
According to the Apple Store Online, it is compatible with iPhone 5 and iPhone 5s
Mophie Juice Pack Plus for iPhone 5/5s
http://store.apple.com/us/product/HD069ZM/A/mophie-juice-pack-plus-for-iphone-55 s?fnode=48
Regards,
-Norm G.

Case study: "Large?" labview programs flooded with different VIT's

Case study: "Large?" labview programs flooded
with different VIT's
Type of application:
Computer with loads of individual hardware connected or other software (either
onsite (different buses) or offsite (Satelite/GSM/GPRS/radio etc.).
Hardware
description: little data "RPM" but communications to all devices are intact.
More "RPM" when many VITs are involved.
Size: 1000+
VITS in memory (goal). Total software has been tested and simulated with 400.
I'm posting
this post after reading this thread (and actually I cant sleep and am bored as
hell).
Note: I do
not use LVOOP (but sure post OOP examples, am starting to learn more and more
by the day.)
Things I
will discuss are:
Case 1: Memory usage using a plugin
architecture
CASE 2: memory usage using VITs (!)
CASE 3: updating datastructures:
CASE 4: shutdown of the whole system
CASE 5: stability & heath monitoring
CASE 6: Inifiles
CASE 7: When the hardware is getting crappy
Total
application overview:
We have a
main application. This main application is mainly empty as hell, and only holds
a plugin functionality (to register and administer plugins) and holds an
architecture that holds the following items:
Queue state
machine for main application error handling
Queue state
machine for status messages
Queue state
machine for updating virtual variables
Event state
machine for GUI
Some other
stuff
Other
global functionality is:
User
logins, user configurations and unique access levels
Different
nice tools like the good old BootP and other juicy stuff
Supervision
of variables (like the NI tag engine, but here we have our own datastructures)
Generation
of virtual variables (so that the user can configure easy mathematical
functions and combining existing tags)
Licensing
of plugins (hell we free-lance programmers need some money to don't we?)
Handles
all communication between plugins themselves, or directly to a plugin or vice
versus.
And now we don't
talk about that (or marketing) the main application .
Message Edited by Corny on 01-20-2010 08:52 AM

CASE 3: updating datastructures:
As we do NOT use clusters here (that would
just be consuming) we only use an 1D array of data that needs to be updated in
different functional globals. If the the number of VITS exceeds so that the
updating of this datastructures becomes the bottleneck, this would cause
delays. And since in this example we use 250 serial interfaces (lol) we do not
want to disrupt that by any delays. When this happends, does anyone know a good
solution to transfer data?
A thought:
perhaps sending it down to the plugin and let the plugin handle it, this should
save some time, but then again if more VITs are added again this would become a
bottleneck and the queue would fill up after a while unable to process it fast
enough. Any opinions?
CASE 4: shutdown of the whole system
Lets say we
want to close it all down, but the VITs need perhaps to do some shutdown
procedure towards the hardware, that can be heavy.
If we ask
them to shutdown all together we can use an natofier or userevent to do this
job. Well, what happends next is that the CPU will jump to the roof, and well
that can only cause dataloss and trouble. The solution here was to let the
plugin shut them all down one by one, when one has been shutdown, begin at the
next. Pro; CPU will not jump to the moon. Con's: shutdown is going to take a
while. Be ready with a cup of coffee.
Also we
want the main application not to exit before we exit. The solution above solved
this as the plugin knows when all have been shut down, and can then shut itself
down. When all plugins are shutdown - the application ends.
Another
solution is to use rendovous (arg cant spell it) and only shut the system down
when all rendezvous have met.
CASE 5: stability & heath monitoring
This IS
using a lot of memory. How to get it down. And has anyone experienced any
difficulties with labview using A LOT of memory? I want to know if something
gets corrupt. The VITs send out error information in case, but what if
something weird happens, how can I surveillance all the VIT's in memory to know
one is malfunctioning in an effective way/code (as backup
solution so the application knows
something is wrong?
CASE 6: Inifiles
Well, we
all like them. Even if XML is perhaps more fahionally. Now Ive runned some
tests on large inifiles. And the labview Inifile functions use ages to parsing
all this information. Perhaps an own file structure in binary format or
something would be better? (and rather create an configuration program)?
CASE 7: When the hardware is getting crappy:
Now what if
the system is hitting the limit and gradually exceeds the hardware req. of the
software. What to do then (thinking mostly of memory usage)? Needing to install
it on more servers or something and splitting configurations? Is that the best
way to solve this? Any opinions?
Wow. Time for a coffee cup. Impressive if someone
actually read all of this. My goal is to reach the 1000 VIT mark.. someday.. so
any opinions, and just ask if something unclear or other stuff, Im open for all
stuff, since I see the software will hit a memory barrier someday if I want to
reach that 1000 mark hehe

I have a Honday FIT 2013 with the USB for iPod and the Auxillary jack. I plan to purchase an iPhone 5c. Can I listen to music from my iPhone through my car speakers?

I have a Honday FIT 2013 with the USB for iPod and the Auxillary jack. I plan to purchase an iPhone 5c. Can I listen to music from my iPhone through my car speakers?

Click the "Upgrade Eligibility" link on the right side (under "Learn more about buying iPhone) here:
http://store.apple.com/us/buy-iphone/iphone5s
If you're not eligible for upgrade, it will tell you how much more than US$199 you will be charged.

Do iphone 5 cases fit iphone 5s?

Do iphone 5 cases fit iphone 5s?

Most of them would. Like Paul Conaway mentioned, just be wary of those that covers the home button.
Other than that, the phone cases will usually specify if they fit iPhone 5s or not.
If they don't, just do a quick google for the brand of casing and iPhone 5s and usually there will be reviews letting you know if they fit the 5s.

Why are there no iPhone 6 battery cases with a lightning input port for charging instead of a micro USB?

Why are there no iPhone 6 battery cases with a lightning input port for charging instead of a micro USB?
Does it have something to do with the MFI certification? Is micro USB just cheaper?
I don't want to have to carry around another cable and it seems like this would be a good product. What am I missing?

sanjaykd wrote:
Valid point.
So can I ask why there are no MFI certified lightning female ports on battery cases? Or more so, does this certification even exist?
And why not?
This is a user-to-user technical support forum. There is no one here from Apple to answer "why". Again, I would recommend contacting the manufacturers or use the Contact Us link at the bottom right of every page for information on how to contact Apple directly.
I suspect that manufacturers may view the more standard microUSB charging port as a selling point. Those types of cables are cheaper and ubiquitous.

Large cradle to fit iPhone with a case or cover?

Similar Messages

Maybe you are looking for