Large files are not in cache directory

I've been watching some training modules and in order to watch them off line I've been going into the cache and then just renaming the files with mp4 extension, so everything works fine except for one particular module whose size is 48344797 bytes (46Mb) Initially i thought that it was an issue with the object cache limit in ff (I'm working with 19.0.2) but in the configuration I can see the setting is 51200 (51Mb) so this looks fine.
to make matters worse if I disconnect the network after the file has finished downloading ( i use httpfox to check this) i can view the module without any issues so I ff obviously has it somewhere. I've looked in the about:cache (all the smaller files where there) but it's not there.
Where else can I look for this cached object?
I'm running windows 7 sp1

There used to be an addon that let you save files from the cache called Cache Viewer: https://addons.mozilla.org/en-us/firefox/addon/cacheviewer-continued/
It still exists but can't get the latest version fully reviewed b/c the people reviewing the addon are too slow for some reason.
It has a [https://addons.mozilla.org/en-us/firefox/addon/cacheviewer-continued/reviews/437954/ good review] from someone who installed from the other location:
https://bitbucket.org/jsumners/cacheviewer-continued/downloads
Get the one dated 2013-02-11.
So this addon may be able to help grab it. If not, it could be because that video is a streaming video and those usually have been hard to save from the Firefox cache. I use a addon called [https://addons.mozilla.org/en-US/firefox/addon/video-downloadhelper/ Video DownloadHelper] for those.

Similar Messages

Large files are not getting transferred through file channel

Hi
the below code works fine for files upto 32 mb, but if the file size is more like 141MB, 250MB then the transfer starts but it doesnot get complete. the destination pdf is not opening and acrobat reader says that the pdf has been corrupted
import java.beans.*;
import java.io.Serializable;
import java.io.*;
import java.io.File.*;
import java.util.zip.*;
import java.nio.*;
import java.nio.channels.*;
public class Transfer
   public static void main(String args[]){
     String srcFile = "C:\\\\144 mb.pdf";
     String dstFile = "F:\\144 mb.pdf";
     try{
     FileInputStream in = new FileInputStream(srcFile);
        FileOutputStream out = new FileOutputStream(dstFile);
        FileChannel fcin = in.getChannel();
        FileChannel fcout = out.getChannel();
        long size = fcin.size();
        fcin.transferTo(0, size, fcout);
     }catch(Exception e){
}//close of classwhat could be the reason

below is the code that executes as Task1 when triggered as a thread from Class B
public class C implements Runnable{
    String srcFile = "";
    String dstFile = "";
    public C (String srcFile,String dstFile){
       this.dstFile = dstFile;
       this.srcFile = srcFile;
public void run() {
try
       FileInputStream in = new FileInputStream(srcFile);
       FileOutputStream out = new FileOutputStream(dstFile);
        FileChannel fcin = in.getChannel();
        FileChannel fcout = out.getChannel();
        int maxCount = 32 * 1024 * 1024;
        long size = fcin.size();
        long position = 0;
        while (position < size) {
            position += fcin.transferTo(position, maxCount,fcout);
          fcin.close();
          fcout.close();
}catch(IOException ioe)
          System.out.println("FIECOPY SQL ERROR:"+ioe);
catch(Exception e)
          System.out.println("FIECOPY ERROR IN TRANSFER FILE:"+e);
}below is the code that executes as Task2 when triggered as a thread from Class B
public class D implements Runnable{
    String srcFile="";
    String dstFile="";
    String moveCategory="";
    public D(String srcFile,String dstFile,String moveCategory){
       this.dstFile = dstFile;
       this.srcFile = srcFile;
       this.moveCategory = moveCategory;
public void run(){
try
       FileInputStream in = new FileInputStream(srcFile);
       FileOutputStream out = new FileOutputStream(dstFile);
        FileChannel fcin = in.getChannel();
        FileChannel fcout = out.getChannel();
     int maxCount = 32 * 1024 * 1024;
        long size = fcin.size();
        long position = 0;
        while (position < size) {
            position += fcin.transferTo(position, maxCount,fcout);
          fcin.close();
          fcout.close();
}catch(IOException ioe)
          System.out.println("FIECOPY SQL ERROR:"+ioe);
catch(Exception e)
          System.out.println("FIECOPY ERROR IN TRANSFER FILE:"+e);
}

Files are not getting posted in destination directory,how to trace in XI

Hi,
our scenario is proxy to file.
We are posting files of .TRG and .DAT format in destination directory.Due to less space in destination directory, files only .TRG files are getting posted but .DAT are not getting posted.but i have checked in XI system SXMB_MONI,no error message is coming.message is getting processed successfully.
why it is not visible and to monitor that files are not saved at the destination.
Is this normal with XI that we can not see of files are really saved?

Hi,
> it should generate two files as per scenario but only one file is getting generated due to less space,
NO.
If No Space, The error will pops out in RWB .
Check the directory of the File Adapter you are using
Regards
Agasthuri Doss

Attempted to mail an email with a large attachment file. One of the addresses was bad. When my Outlook is running, the Mac tries to send it and shows the progress. However, when I look in my Outbox the files are not there. It does show up in the Outb

attempted to mail an email with a large attachment file. One of the addresses was bad. When my Outlook is running, the Mac tries to send it and shows the progress. However, when I look in my Outbox the files are not there. It does show up in the Outbox progress section but I can not delete it when it is there.
Where do these files reside?
Is there a hidden Outbox??
MacBook Pro, Mac OS X (10.7.1)

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Files are not getting updated in sharepoint 2013 because of office upload center error

Dear Team,
I am getting upload failed/upload error in Office Upload Center.
Scenario: I opened excel(version is 2013) file from sharepoint 2013 application and closed and after updating. Later when I opened the file I got error like "UPLOAD FAILED We are sorry this didn't work. Try saving again later and if that still doesn't
work, click save a copy."
I found the error is because file is getting upload failed / upload error in microsoft office upload center2013.
Please let me know if anyone know the solution for my issues
Thanks in Advance
Girish

Hi Girishkg,
The default IIS limit for the upload file size is 30MB. If the selected files are larger than 30MB, the files are not uploaded.
The limit can be set in web application’s web.config file or in IIS .
There are two detailed articles about setting the limit:
http://www.brainlitter.com/2009/07/13/sharepointcannot-upload-documents-larger-than-30mb-on-windows-server-2008-or-sbs-2008-application-servers/
http://expectedexception.wordpress.com/2011/02/08/upload-multiple-files-fail-without-error/
Feel free to reply if the issue still exists.
Best regards
Wendy Li
TechNet Community Support

Since changing our computer I have been unable to download ebooks to my Reader Library I get a message Some file types associated with EPUB files are not associated with Reader Library; Waterstones suggest that I may have accidentally created a new Adobe

When I try to download them from the Waterstones website I get a message saying:
‘Some file types associated with EPUB files are not associated with Reader Library. Do you want to associate them now? When I reply yes I get another message; ‘Configuration error unable to update EPUB files check network firewall and try again’.
The ‘books’ are saved in the Download directory and I can’t transfer them from there to my E-Reader. I have not had any problems before, it was very simple; I saved the download and it automatically went into the Reader Library.
I contacted HP and they said it is a software error and suggested I contact Waterstones. I contacted Waterstones Customer Support and got the following response:
As the error message is specifically mentioning the firewall it does sound like something in the firewall settings is stopping the download from taking place correctly. However, the files should not be being saved to the Download folder. It would be worth trying again by going to your Digital Order History on your Waterstones.com account and pressing the download button, and then making sure to press "Open" not "Save". When you press Open rather than Save it should give the option to open the file with Adobe Digital Editions. If the firewall message still comes up then I'm afraid something is blocking it on your end.
If the above "Open" download method works but you then still get an error message it could possibly be that you have accidentally created a new Adobe ID when setting up on the new computer, rather than signing in with your old Adobe ID. It would be worth trying the aforementioned download technique again first, but if problems did still persist it would be worth calling Adobe themselves on 0207 365 0735, as they should be able to sort out any account issue.
In response to the first para of Waterstones email I already do what they suggest I do press ‘Open’ not ‘Save’ but I don’t get the open with Adobe Digital Editions (we have installed Adobe Digital Editions on the new computer. Waterstones say we may have ‘accidentally created a new Adobe ID when setting up the new computer’ does that mean that we shouldn’t have installed Adobe Digital Editions on the new computer as it would have already been there? How do I sign in with my old Adobe ID?

Hi all after attampting to get some supoport from adobe by phone.... nice people infurating policys as far as support for digital editions or DRM is conserned... However I got no where with support.
I ended up instaling Digital editions on my desktop PC and going through the motions of registering and borrowing a book then returning it. Then I trying on my iPad, Bluefire worked, Over drive did not so I completely removed Overdrive and reinstalled and re registered. all working now.
Maybe some one at adobe did something. Maybe the install of the adobe DE client on a PC corrected what ever was out of wack with my account. Mayby the server that my account lives on did a scan disk and corrected a bad clustrer.
What ever happend My account is actiove and working again. hope this helps others.

Some PDF files are not displayed in Bridge

Hello,
here is the problem: I use Adobe Bridge CS2 to browse my large collection of PDF files, and unfortunately some files are not displayed in the Filmstrip View mode; instead a generic icon is shown (bridge1.png). Most PDF files, however, are displayed correctly (bridge2.png). Is this the problem of Bridge or of certain PDF files, and how should I fix them to make them being displayed by Bridge?
Thanks.

curt y
In fact, all files have similar type of content (research papers). However, I found out that all files which are not displayed are "protected" by the publisher such that they only can be viewed and printed, but not modified or disassembled. Apparently, this causes the problem with Bridge not displaying them. It's a pity that Bridge cannot handle them...
Thanks for the help, though.

LabView 2010 Application Builder for EXE Always Included files are not Included

In LabVIEW 2010 F2, When I am using the Application Builder to build an EXE file, I have listed 10 or so files to Be "Always Included". But when I Explore the directory where the EXE was built, those "Always Included" files are not there or in any subdirectory under the EXE file.
This frequently makes my EXE file not work properly because important files are missing. I have to spend extra debugging time to find out the the cause of my problem is missing files that the Application Builder should have transferred "Always".
Why did the Application Builder, when building an EXE target, not include the files that should be "Always Included"?
Why does the Application Builder ignore these files specifications?

Dennis Knutson wrote:
The build does include files you select. Post an example project with a small VI and some separate files where this does not happen.
No, it does not appear that all of the files that I listed in the "Always Include" list are copied during the Build process to the Build directory or any subdirectory under that.
The Build Source Files.jpg file shows most of the list of the files that should be "Always Included". Notice the .VI and .ctl files that are listed
The Build Directory.jpg file shows the file in the Build directory that were built.
The Data Directory.jpg file shows the data directory under the Build directory and may include some of the files listed in the "Always Include", but not all of them.
The other subdirectories under the Build directory were created by me and do not include any files that were copied during the Build process.
So not ALL of the files that were included in the "Always Include" list were copied into the Build directory area as expected. ALL of the files that are listed as "Always Include" should be copied, if they exist. Those files existed when then were selected for the List and they existed at the time of the Build.
I can not include an example project that demonstrates this. I am prevented from doing so by the terms of an NDA. You are going to have to take my word that this event is real and happens the same way every time. This information should be sufficient for someone to investigate why do not ALL of the files listed in the "Always Include" list are copied into the Build directory area regardless of the file type or contents.
Attachments:
Build Source Files.jpg ‏151 KB
Build Directory.jpg ‏125 KB
Data Directory.jpg ‏131 KB

Error: JAR-Ressources in JNLP-File are not signed from the same Certificate

I have two handfull jars, all signed in batch with the same
Certificate. When i start my App with Webstart it tells me:
Your JAR-Ressources in JNLP-File are not signed from the same Certificate.
"JAR-Ressourcen in JNLP-Datei sind nicht von demselben Zertifikat signiert"
Well im shure that i signed all my jars with the same Certificate.
What can i do to solve this problem ???

I get the same error.
Strangely exactly every second time it works and every second time I execute the JNLP I get the following error:
network: Cache-Eintrag nicht gefunden [url: http://localhost:8080/fibo/lib/js_15R41.jar, Version: null]
network: Verbindung von socket://127.0.0.1:3621 mit Proxy=DIRECT wird hergestellt
#### Java Web Start Error:
#### JAR-Ressourcen in JNLP-Datei sind nicht von demselben Zertifikat signiertCan this have something to do with browser caching? So that every 2nd time it tries to access the cache, fails. And than ignores the cache and works?
Any ideas?
Cheers,
Rio

Images and .properties(bunldes) files are not being found from my JSPs

Hi,
I have created .ear file by using ANT Application. And deployed into Oracle9iAS(OC4J). Here problem is that images and .properties(internationalization bundles)files are not found from JSPs.
Here is my directory structure.
public_html--->locale -->BusinessEntity -->businessentity_en_US.properties
--->enterprise -->images -->knowldege.jpg
--->BusinessEntity-->BEAdd.jsp
in my jsp bundle(.properties)file is accessed like this:-
<i18n:bundle baseName="/locale/-->BusinessEntity/businessentity" id="businessentity" locale="<%= locale %>" />
in my jsp images accessed like this:-
src="/enterprise/images/knowldege.jpg".
In my working environment, without creating .ear file, images and .properties files are being found my JSPs. But if i create .ear file and after deploy, images and .properties files are not being found my JSPs.
please let me know where i might did wrong
thanks in advance
srinivas

Hi i am again. Here is my configuration files(server.xml and default-web-site.xml)
server.xml :-
<?xml version="1.0"?>
<!DOCTYPE application-server PUBLIC "-//Evermind//DTD Orion Application-server//EN" "http://xmlns.oracle.com/ias/dtds/application-server.dtd">
<application-server application-directory="../applications"
deployment-directory="../application-deployments"
>
     <library path="../tools.jar" />
     <rmi-config path="./rmi.xml" />
     <jms-config path="./jms.xml" />
     <log>
          <file path="../log/server.log" />
     </log>
     <transaction-config timeout="30000" />
     <global-application name="default" path="application.xml" />
     <application name="nalluri" path="../applications/trainiumear.ear" auto-start="true" />
     <global-web-app-config path="global-web-application.xml" />
     <web-site path="./default-web-site.xml" />
     <cluster id="-1640090707" />
</application-server>
default-web-site.xml:-
<?xml version="1.0"?>
<!DOCTYPE web-site PUBLIC "Orion Web-site" "http://xmlns.oracle.com/ias/dtds/web-site.dtd">
<web-site port="8888" display-name="Default Oracle9iAS Containers for J2EE Web Site">
     <default-web-app application="nalluri" name="Commonwar" />
     <access-log path="../log/default-web-access.log" />
</web-site>
thanks in advance
wating for reply
srinivas

How can I get to read a large file and not break it up into bits

Hi,
How do I read a large file and not get the file cut into bits so each has its own beginning and ending.
like
1.aaa
2.aaa
3.aaa
4....
10.bbb
11.bbb
12.bbb
13.bbb
if the file was read on the line 11 and I wanted to read at 3 and then read again at 10.
how do I specify the byte in the file of the large file since the read function has a read(byteb[],index,bytes to read);
And it will only index in the array of bytes itself.
Thanks
San Htat

tjacobs01 wrote:
Peter__Lawrey wrote:
Try RandomAccessFile. Not only do I hate RandomAccessFiles because of their inefficiency and limited use in today's computing world, The one dominated by small devices with SSD? Or the one dominated by large database servers and b-trees?
I would also like to hate on the name 'RandomAccessFile' almost always, there's nothing 'random' about the access. I tend to think of the tens of thousands of databases users were found to have created in local drives in one previous employer's audit. Where's the company's mission-critical software? It's in some random Access file.
Couldn't someone have come up with a better name, like NonlinearAccessFile? I guess the same goes for RAM to...Non-linear would imply access times other than O(N), but typically not constant, whereas RAM is nominally O(1), except it is highly optimised for consecutive access, as are spinning disk files, except RAM is fast in either direction.
[one of these things is not like the other|http://www.tbray.org/ongoing/When/200x/2008/11/20/2008-Disk-Performance#p-11] silicon disks are much better at random access than rust disks and [Machine architecture|http://video.google.com/videoplay?docid=-4714369049736584770] at about 1:40 - RAM is much worse at random access than sequential.

HELP (after XSAN controller crash files are not accessible)

Hi,
We are having a major issue with one of our XSAN setups. During my breah one of the Xsan controller crashed and burned. So a college that to resuce it by rebuilding the contoller and adding the Luns to the Xsan volume.
The files are not showing up but they are still there when doing a data recovery scan.
So where I Need help with (never done this before) to get the files back. What would be next steps to get the data back?
Oh yeah, I will veryfy this today but I think the LUNS have the same identifiers and LUN ID asigned as the previous controller settings.
This Xsan setup is made out of Mac Pro Mountain Lion Xsan 3.0 (controller), two Promise Vtrak E-Class Raids and one Sandbox.
Appreciate any help thanks!

Here is the result for cvfsck -nv
Re-creating File System cvfsck Directory '/Library/Logs/Xsan/data/XSAN/trace'.
Created directory /tmp/cvfsck15730a for temporary files.
Creating MetadataAndJournal allocation check file.
Creating Video allocation check file.
** NOTE ** Read Only Check.
File system journal will not be recovered.
The results may be inconsistent and mis-leading.
Super Block information.
FS Created On               : Tue Aug 6 13:15:39 2013
Inode Version               : '2.7' - 4.0 big inodes + NamedStreams (0x207)
File System Status          : *Dirty*
Allocated Inodes            : 1536
Free Inodes                 : 1527
FL Blocks                   : 1
Next Inode Chunk            : 0x2934
Metadump Seqno              : 0
Restore Journal Seqno       : 0
Windows Security Indx Inode : 0x5
Windows Security Data Inode : 0x6
Quota Database Inode        : 0x7
Client Write Opens Inode    : 0x8
Stripe Group MetadataAndJournal             ( 0) 0x2ba7b90 blocks.
Stripe Group Video                          ( 1) 0x3691cc40 blocks.
Inode block size is 1024
Building Inode Index Database 1536 (100%).
   1536 inodes found out of 1536 expected.
Verifying NT Security Descriptors
Verifying Free List Extents.
Scanning inodes 1536 (100%).
Sorting extent list for MetadataAndJournal pass 1/1
Updating bitmap for MetadataAndJournal extents 4 (100%).
Checking for dead inodes 1536 (100%).
Checking directories 1 (100%).
Scanning for orphaned inodes 1536 (100%).
Verifying link & subdir counts 1536 (100%).
Checking free list. 1536 (100%).
Checking pending free list.
Checking Arbitration Control Block.
Checking MetadataAndJournal allocation bit maps (100%).
Checking Video allocation bit maps (100%).
File system 'XSAN' was modified.
File system 'XSAN'. Blocks-915524672 free-915514163 Inodes-1536 free-1527.
File System Check finished.

Flash files are not smooth

Hi,
I am running DMP 4400G (5.2.3) with DMM server 5.2.3.
Every thing working fine except the flash files. All the flash files are not smooth. They are playing like fram by fram. I am using flash 10.

We've run every type of flash on the 4400. We've tried flash 7, flash 10, flash lite, action script 2 and action script 3. For the most part, flash will *not run smoothly* if:
1. You have very large files, like imported bit map images.
2. Large sweeping motions or tween animation effects.
3. Multiple flash objects on a single page.
4. Video embedded in flash will never play evern remotely reasonably well.
The best thing to do is:
1. Keep flash objects small.
2. Animations should have as few frames as possible, no tween effects, no big sweeping motions, in other words, make transitions small and very quick.
3. Keep flash objects self contained, that is, don't try to pull in too much content from external sources.
Like I said, we've tried so many things, but when it comes to flash, the 4400 is rather restrictive.
Good luck!
-Michael

Critical BitLocker Drive Encryption system files are not available

Hi all,
We are running into some issues when attempting to configure BitLocker Drive Encryption through the BitLocker UI on Windows Server 2008SP2.
On running the BitLocker configuration screen we are presented with a message stating that
‘Your system volume is not configured correctly to allow you to use BitLocker Drive Encryption.
Critical BitLocker Drive Encryption system files are not available’
We believe this issue may have been caused during a recent hardware migration using the DoubleTake Move software as we encountered a similar issue with the Windows Backup utility not seeing any available HDDs.
Has anyone else encountered a similar issue and aware of any potential fix?

I think it should be supported on Windows Server 2008 as it is supported on Windows Vista.
Can you check whether BdeHdCfg.exe is present in System32 folder. If not can you copy the BdeHdCfg.exe installer from higher version of OS and copy it to the system32 folder on Windows Server 2008 and then run the command with the administrative rights.
NOTE : Make sure to change the directory to %SystemDrive%\Windows\System32
Before running the command.
Regards, "Gaurav Ranjan" =========== NOTE: Mark as Answer and Vote as Helpful if it helps =======

TS2512 i m trying to convert dpx files to mov in colour 1.5.3 but in file browser files are not seen in proper order for ex files names are 12345 it is coming as 23145 bcoz of which in output also its coming in wrong order

i m trying to convert dpx files to mov in colour 1.5.3 but in file browser files are not seen in proper order for ex files names are 12345 it is coming as 23145 bcoz of which in output also its coming in wrong order

1) What you downloaded should be a packed file (zip, tar.gz, etc) that needs to be unpacked into the directory of your choice.
2) & 3) are answered by Ant's installation documentation (the page you're quoting from):
http://ant.apache.org/manual/index.html

Large files are not in cache directory

Similar Messages

Maybe you are looking for