Large number of connections with AMS

Hi,
I need to display multiple view in a application. Multiple camera view up to 16 are displaying in the interface. But some of the connections are rejected.
NetConnection.Connect.Rejected
NetConnection.Connect.Closed
protocol is : RMTP
I am unable to identify the error. Is there any limitation in it. please help.

Here's the limits in the comparison guide of Adobe Media Server:
http://www.adobe.com/hk_en/products/adobe-media-server-family/buying-guide-comparison.html
In Pro and Extended IP multicast is unlimited, otherwise limited to 10 minutes in the trial.

Similar Messages

Ramifications of large number of connections.

Our application uses direct driver connections. We are thinking about increasing the number of connections in /etc/odbc.ini to a very large number.
(1) Are there any ramifications in increasing this attribute?
(2) I read that each connection takes 1 semaphore. Does TT use all the semaphores when odbc.ini is first read or as needed?
TimesTen 6.0.4
RedHat Linux
Thanks,
Linda

Hi Linda
The 'Connections' attribute will tell TimesTen what the maximum number of connections is expected to be to the data store. TimesTen will then pre-allocate one semaphore for each connection at the time the data store is loaded.
If you exceed this value (e.g. you set Connections to 200 and actualy make 300 concurrent connections) then you wont get an error, also TimesTen wont crash, but connections #201->300 will perform sub-optimally.
So I'd recommend you 1) work out what your maximum number of connections is 2) set the kernel parameters relating to semaphores appropriately (see the section in the install guide relevant to your OS for info on how to do this) 3) set the value in your odbc.ini 4) reload your data store.
Keep in mind that you are allowed ~2000 connections to a data store, and this figure also must include internal connections (like the rep agent, cache agent etc).
If you anticipate make a great number of connections, it is probably better to consider implementing a connection pool. There is documentation on this in the guides, and some examples can be found on how to achieve it in the demo directory.

Number of connections with JSP

I'm using a Bean from examples, its name: "ods", this is Pool Connection Cache, when a user start connection, this open 10 connections. In my project works 20 users, the DBA prefers don't use too many connections. The version of DB is 8.1.7 and web server 9iAS.
How do I do?
Can I use other number of connections by session?
What is the most rapid connection for work?
The instruction used is:
<jsp:useBean id="ods" class="oracle.jdbc.pool.OracleConnectionCacheImpl" scope="session" />
Thanks
MIGUEL ANGEL CARO
[email protected]

Hi,
Please repost your question in the J2EE forum. This forum is for Web Cache issues only. Sorry about the confusion.
We'll be changing the title of this forum soon to avoid mispostings.

Number of connections with JSP pool cache

I'm using a Bean from examples, its name: "ods", this is Pool Connection Cache, when a user start connection, this open 10 connections. In my project works 20 users, the DBA prefers don't use too many connections. The version of DB is 8.1.7 and web server 9iAS.
How do I do?
Can I use other number of connections by session?
What is the most rapid connection for work?
The instruction used is:
<jsp:useBean id="ods" class="oracle.jdbc.pool.OracleConnectionCacheImpl" scope="session" />
Thanks
MIGUEL ANGEL CARO
[email protected]

Hi,
Please repost your question in the J2EE forum. This forum is for Web Cache issues only. Sorry about the confusion.
We'll be changing the title of this forum soon to avoid mispostings.

Copying large number of files with Finder

When you copy lots of files and folders with Finder, it appears to count up the number of "items" and then start copying and at the same time the number of items remaining gets smaller and smaller as the copy process proceeds.
My question is what are the "items" that Finder is referring to? I did this on a folder with several folders and files and it came up with like about 45K items, but if I open up a Terminal window and do a "find . -print | wc" I get like about 155K lines, which I would have thought were the "items" that Finder is referring to, but obviously not.
So what is it that Finder means when it talks about "items" when copying things around?
If it matters I was copying the files from external drive to another external drive. And both external drives were physically attached to the two USB ports on a MacBook Pro running Mac OS X 10.5.8
Also, is there a way to find out the number of "items" that Finder just copied as sometimes this number goes away so quickly before it registers on my eyeball/brain synapses Darn those fast computers I can go to the Finder's "Edit" menu and undo the last operation but is there somewhere that the number of items last processed can be looked at?
And one last Finder question - is the progress bar that the Copy operation shows measure the number of items or the magnitude of the amount of MB it has copied or about to copy? So a copy of two items of 10GB each would progress in three discreet jumps (0%, 50% and 100%) and go much quicker versus a copy of 10Billion items of two bytes each - even though a total of 20GB were transferred in both cases?
Thanks...
-Bob

ReallyDeepYogurt wrote:
My question is what are the "items" that Finder is referring to? I did this on a folder with several folders and files and it came up with like about 45K items, but if I open up a Terminal window and do a "find . -print | wc" I get like about 155K lines, which I would have thought were the "items" that Finder is referring to, but obviously not.
This is a guess, but I'd think that the Finder considers a "package" to be one item, while the "find" command counts each file within a package.

Problem with great number of connections with jolt

My application connects to Jolt using the java API. The two kind of object i am using
are JoltSesion and JoltService. i tried
to use several service within the same session and tried one service per session.
The two solutions gave me the same result in case of a great number of simultaneous
connections: Jolt
doesn't accept any more connections and my java program receive
errors like RESCON FAILED, CHALLENGE FAILED...
can Jolt support more than 20 connexion per sec ?? and if this
the case, what are the parameters to fix to allow this ?
Thanks in advance,
Pierre

Hi Ali,
please check whether you have unchecked the "Use Default Settings" checkbox in the display property.
BR
adlin

TS4079 Problems with Siri. Large number of contacts with similar names

I work for a retail company and have the locations of the stores listed in my phone as "Store 1, Store 2..." When I ask Siri to call a specific store, it is not unsderstanding me. I have tried editing the contacts to make it more symplistic but I keep getting weird responses. I do not have this problem when calling individuals. Has anyone else had this type of problem? If so, can it be fixed?

vindictive1 wrote:
I have 3 major software problems (bugs) and i would like to report them in hopes that Apple would release a quick and prompt fix for these problems.
Then report them to Apple here. This is a user to user support forum.

Large number of deadlocks seen after upgrade to 2.4.14

We upgraded the BDB version to 2.4.14 and are using the latest 4.7 release. Without code change on our part we are seeing large number of deadlocks with the new version.
Do let me know if more information is needed.
BDB: 106 lockers
BDB: 106 lockers
BDB: 106 lockers
BDB: 106 lockers
BDB: Aborting locker 8000a651
BDB: MASTER: /m-db/m-db432816-3302-4c30-9dd0-e42a295c970c/master rep_send_message: msgv = 5 logv 14 gen = 149 eid -1, type log, LSN [825][1499447]
BDB: 107 lockers
BDB: Aborting locker 8000a652
BDB: 107 lockers
BDB: MASTER: /m-db/m-db432816-3302-4c30-9dd0-e42a295c970c/master rep_send_message: msgv = 5 logv 14 gen = 149 eid -1, type log, LSN [825][1500259] perm
BDB: MASTER: will await acknowledgement: need 1
BDB: 106 lockers
BDB: 106 lockers
BDB: Aborting locker 8000a65a
BDB: Aborting locker 8000a658
BDB: MASTER: got ack [825][1500259](149) from site rit-004:10502
BDB: 105 lockers
BDB: 103 lockers
BDB: Container - 5e69b5cf184b41ef8f0719e1b0f944a1.bdbxml - Updating document: 5ca1ab1e0a0571bf048c6e298618c7048c6e2ec315a3
BDB: 104 lockers
BDB: Container - 5e69b5cf184b41ef8f0719e1b0f944a1.bdbxml - Updating document: 5ca1ab1e0a0571bf048c6e298618c7048c6e2ec35d5d

Also an interesting observation the replica process which not doing any thing except keeping up with the master is eating 3/4 times more cpu than the master when i am creating and updating records in the xml db.
On a 4 cpu setup, the master process takes about half a cpu where as the replica is chewing upto 2 CPUs
What is the replica doing which is this cpu intensive?!?!?!

Help in sharing a large number of photos?

I am looking for a reasonably quick way of sharing a large number of photos with other members of my church as well as on other occasions family and friends.
The photos are all loaded onto my iPad at their original resolution and are high quality .jpegs taken with a Nikon DSLR (D7000).
I would prefer to use something "cloud" based rather than a commercial enterprise if possible but don't know how to do it.
Can someone give me some suggestions? I am a long time PC user and am pretty adept at Windows but a stymied by the Apple system, particularly my inability, seemingly to really delete individual photos without finding them all over again somewhere else on the iPad. Delete "everywhere" seems not to be quite accurate to describe what happens.
Thanks for helping me out.
Bill Waxman

Try sharing it via photostream. It makes a link so people with non iOS devices can view them all you do is forware it to their emails........
heres a link for photstream. Good luck!
http://support.apple.com/kb/ts4379
Follow the steps below to create a shared photo stream. Note that you cannot share all the photos in My Photo Stream at one time. However, you can select images from it to create a shared photo stream.
On your device using iOS 6:
From the Home screen, tap Photos.
Tap the Photo Stream tab. (Note: You can also share images from your Camera Roll or an album in your Camera Roll. Tap the Albums tab, then tap Camera Roll or an Album. Continue with steps 4-7 below.)
Tap My Photo Stream, then tap Edit.
Tap each photo you'd like to add to the shared photo stream. A check mark will appear on selected photos. Tap Share.
Tap Photo Stream. (If this is not your first shared photo stream, you'll need to select New Photo Stream from the Add to a Photo Stream list.)
Enter the email addresses of the people with whom you'd like to share this new photo stream. Type in a name for your photo stream. To share this photo stream on iCloud.com, move the Public Website slider to the ON position. If you will be sharing your stream with someone who does not have an iCloud account, you will need to make the stream public. People without an iCloud account can view the stream in a web browser. Tap Next.
Optionally, you can add a comment for your new stream to introduce it. Tap Post.
To share a Stream with someone who wishes to view it from a web browser, or to post a shared photo stream to Facebook or Twitter:
Find the name of the shared photo stream from your list of photo streams and tap the blue arrow on your iPhone or iPod Touch. Tap Edit on your iPad, then tap the name of the shared photo stream.
Tap Share Link.
To share with Facebook or Twitter, Tap either Facebook or Twitter, and tap Post.
To send the link in a message or email, tap Message or Email.
You can also opt to tap the Copy a link URL so that you can post it elsewhere.

DBA Reports large number of inactive sessions with 11.1.1.1

All,
We have installed System 11.1.1.1 on some 32 bit windows test machines running Windows Server 2003. Everything seems to be working fine, but recently the DBA is reporting that there are a large number of inactive sessions throwing alarms that we are reaching our Max Allowed Process on the Oracle Database server. We are running Oracle 10.2.0.4 on AIX.
We also have some System 9.3.1 Development servers that point at separate schemas in this environment and we don't see the same high number of inactive connections?
Most of the inactive connections are coming from Shared Services and Workspace. Anyone else see this or have any ideas?
Thanks for any responses.
Keith
Just a quick update. Originally I said this was only with 11.1.1.1 but we see the same high number of inactive sessions in 9.3. Anyone else see a large number of inactive sessions. They show up in Oracle as JDBC_Connect_Client. Does Shared Service, Planning Workspace etc utilize persistent connections or does it just abandon sessions when the windows service associated with an application is shutdown? Any information or thoughts are appreciated.
Edited by: Keith A on Oct 6, 2009 9:06 AM

Hi,
Not the answer you are looking for but have you logged it with Oracle as you might not get many answers to this question on here.
Cheers
John
http://john-goodwin.blogspot.com/

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter. If that is the case then something is wrong with iPhoto or your perhaps your library.
How large a date change are you putting in? iPhoto currently has an issue with date changes beyond about 60 years at a time. If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
If that is not the case:
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches > com.apple.iphoto
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
Let me know the results.

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extrem. How do I get Itunes to search for the music here with out trying to copy it to my laptops hard drive??

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port). I see the drive on my laptop and I can add and delete files no problem. How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive? I don't have enough space to do that.

How did you move the music to the external drive? What exactly is on the drive? The entire iTunes folder or only music? If it is the entire iTunes folder you can do the option+start suggestion earlier. If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move. iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507

I just got a new iphone 4 for att and my friend installed the sim card in it for me. the imessage function isnt connecting with the my cell number. a while back i had logged into my apple account on someone elses cell phone and their number keeps showing.

i just got a new iphone 4 for att and my friend installed the sim card in it for me. the imessage function isnt connecting with the my cell number. a while back i had logged into my apple account on someone elses cell phone and their number keeps showing. when i try to just select my number to send and recieve imessages from it will not show up. i can send and recieve regular text but not pictures or imessage. i have tried logging off and restarting and nothing has worked.help please!!

Did you remove your account information from the other person's iPhone?

I recently updated my MacBook Pro to the new software, and now my iMessage and my FaceTime are not connected with my computer. How do I get them to match so that I would be able to use my cellphone number?

I recently updated my MacBook Pro to the new software, and now my iMessage and my FaceTime are not connected with my phone number like it is supposed to be. How do I get them to match so that I would be able to use my cellphone number on my notebook?

To reset any OS X program just go to the folder and trash the affected files.
Open a new Finder Window
Click "Go" in the above status bar
Click and HOLD the "option/alt" key and you will see "Library" now show in the above list
Click Library while still holding the option/alt key and a new window will open with all of your system files
Go to the preference file (NOT Preference Panes)
Locate a file named <com.apple.FaceTime.bag.plist>
Locate another file named <com.apple.FaceTime.plist>
Locate the file <com.apple.iMessage.bag.plist>
Drag the files to the trash
Delete the trash
Close FaceTime and iMessage if not already closed
Relaunch FaceTime and iMessage from Applications folder
This should reset the program back to default. You will have to put your information back into the program but it should work.
Good Luck.

I have an iPad 2 with iOS 5.1 and iBooks version 2.1.1. I have 64GB of storage, 80% is used. iBooks is using 250MB of storage. I have a large number of PDF files in my iBooks library. At this time I can not add another book or PDF file to my library.

I have an iPad 2 with iOS 5.1 and iBooks version 2.1.1. I have 64GB of storage, 80% is used. iBooks is using 250MB of storage. I have a large number of PDF files in my iBooks library. At this time I can not add another book or PDF file to my library. When I try to move a PDF file to iBooks the system works for a while...sometimes the file appears and than disappears....sometimes the file never appears. Is ther some limit to the number of books or total storage used in IBooks? Thanks....

Hi jybravo70,
Welcome to the Apple Support Communities!
It sounds like you may be experiencing issues on your non iOS 8 devices because iOS 8 is required to set up or join a Family Sharing group.
The following information is located in the print at the bottom of the article.
Apple - iCloud - Family Sharing
Family Sharing requires a personal Apple ID signed in to iCloud and iTunes. Music, movies, TV shows, and books can be downloaded on up to 10 devices per account, five of which can be computers. iOS 8 and OS X Yosemite are required to set up or join a Family Sharing group and are recommended for full functionality. Not all content is eligible for Family Sharing.
Have a great day,
Joe

Large number of connections with AMS

Similar Messages

Maybe you are looking for