Large number of USB connections

I have a potential project (not currently mine, so I don't know all the details) where there are >50 BK precisions with USB outputs. These USB outputs are ganged together into hubs, so that the number of physical PC inputs are reduced, but each instrument will still need controlled independently. I think the measurement is likely easy (apply bias, measure current), but I have not controlled this many devices before. How could this be managed? Could I cycle through ports with a For Loop, taking the measurement for each device? Any examples of this?

Actually I was "able to do something about a buggy dll", browbeat them into opening up the hood and letting me see that their dll was just a wrapper around the USB chip hardware dll from the USB chip manufacturer. I wrote LabVIEW to call this "lower level" dll directly, fixed my crashes. As mentioned, a lot of "drivers" supplied by smaller equipment makers is less than useful. I cringe when starting a project where the hardware has be already ordered when I'm told "don't worry, there are LabVIEW drivers for it!" Yikes!
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Similar Messages

TS3694 my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.

my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.
I am in the noerthern [parts of australia and accessing an apple store is not possiable for another month. this is my only soucrce or telecommunication. please help

This is what it says about error 2006
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

Large number of event Log entries: connection open...

Hi,
I am seeing a large number of entries in the event log of the type:
21:49:17, 11 Mar.
IN: ACCEPT [57] Connection closed (Port Forwarding: TCP 192.168.1.78:14312 <-->86.128.58.172:14312 [81.154.101.160:51163] CLOSED/TIME_WAIT ppp0 NAPT)
21:49:15, 11 Mar.
IN: ACCEPT [54] Connection opened (Port Forwarding: UDP 192.168.1.78:14312 <-->86.128.58.172:14312 [81.154.101.160:41820] ppp0 NAPT)
Are these anything I should be concerned about? I have tried a couple of forum and Google searches, but I don't quite know where to start beyond pasting the first bit of the message. I haven't found anything obvious from those searches.
DHCP table lists 192.168.1.78 as the desktop PC on which I'm writing this.
Please could you point me in the direction of any resources that will help me to work out if I should be worried about this?
A slightly longer extract is shown below:
21:49:17, 11 Mar.
IN: ACCEPT [57] Connection closed (Port Forwarding: TCP 192.168.1.78:14312 <-->86.128.58.172:14312 [81.154.101.160:51163] CLOSED/TIME_WAIT ppp0 NAPT)
21:49:15, 11 Mar.
IN: ACCEPT [54] Connection opened (Port Forwarding: UDP 192.168.1.78:14312 <-->86.128.58.172:14312 [81.154.101.160:41820] ppp0 NAPT)
21:49:15, 11 Mar.
IN: ACCEPT [54] Connection opened (Port Forwarding: TCP 192.168.1.78:14312 <-->86.128.58.172:14312 [81.154.101.160:51163] CLOSED/SYN_SENT ppp0 NAPT)
21:49:11, 11 Mar.
IN: ACCEPT [57] Connection closed (Port Forwarding: TCP 192.168.1.78:14312 <-->86.128.58.172:14312 [213.205.231.156:51027] TIME_WAIT/CLOSED ppp0 NAPT)
21:49:03, 11 Mar.
IN: ACCEPT [54] Connection opened (Port Forwarding: TCP 192.168.1.78:14312 <-->86.128.58.172:14312 [178.190.63.75:55535] CLOSED/SYN_SENT ppp0 NAPT)
21:49:00, 11 Mar.
IN: ACCEPT [57] Connection closed (Port Forwarding: TCP 192.168.1.78:14312 <-->86.128.58.172:14312 [2.96.4.85:23939] TIME_WAIT/CLOSED ppp0 NAPT)
21:48:59, 11 Mar.
IN: ACCEPT [57] Connection closed (Port Forwarding: TCP 192.168.1.78:14312 <-->86.128.58.172:14312 [78.144.143.222:21617] CLOSED/TIME_WAIT ppp0 NAPT)
21:48:58, 11 Mar.
IN: ACCEPT [54] Connection opened (Port Forwarding: UDP 192.168.1.78:14312 <-->86.128.58.172:14312 [41.218.222.34:28188] ppp0 NAPT)
21:48:57, 11 Mar.
IN: ACCEPT [54] Connection opened (Port Forwarding: TCP 192.168.1.78:14312 <-->86.128.58.172:14312 [41.218.222.34:28288] CLOSED/SYN_SENT ppp0 NAPT)
21:48:57, 11 Mar.
IN: ACCEPT [54] Connection opened (Port Forwarding: UDP 192.168.1.78:14312 <-->86.128.58.172:14312 [86.132.123.255:18048] ppp0 NAPT)
21:48:57, 11 Mar.
IN: ACCEPT [54] Connection opened (Port Forwarding: TCP 192.168.1.78:14312 <-->86.128.58.172:14312 [86.132.123.255:54199] CLOSED/SYN_SENT ppp0 NAPT)
21:48:55, 11 Mar.
IN: ACCEPT [57] Connection closed (Port Forwarding: UDP 192.168.1.78:14312 <-->86.128.58.172:14312 [86.144.91.49:60704] ppp0 NAPT)
21:48:55, 11 Mar.
IN: ACCEPT [57] Connection closed (Port Forwarding: TCP 192.168.1.78:14312 <-->86.128.58.172:14312 [80.3.100.12:50875] TIME_WAIT/CLOSED ppp0 NAPT)
21:48:45, 11 Mar.
IN: ACCEPT [57] Connection closed (Port Forwarding: UDP 192.168.1.78:14312 <-->86.128.58.172:14312 [78.150.251.216:57656] ppp0 NAPT)
21:48:39, 11 Mar.
IN: ACCEPT [54] Connection opened (Port Forwarding: TCP 192.168.1.78:14312 <-->86.128.58.172:14312 [78.150.251.216:56975] CLOSED/SYN_SENT ppp0 NAPT)
21:48:29, 11 Mar.
IN: ACCEPT [54] Connection opened (Port Forwarding: TCP 192.168.1.78:14312 <-->86.128.58.172:14312 [79.99.145.46:8368] CLOSED/SYN_SENT ppp0 NAPT)
21:48:27, 11 Mar.
IN: ACCEPT [54] Connection opened (Port Forwarding: UDP 192.168.1.78:14312 <-->86.128.58.172:14312 [90.192.249.173:45250] ppp0 NAPT)
21:48:16, 11 Mar.
IN: ACCEPT [57] Connection closed (Port Forwarding: UDP 192.168.1.78:14312 <-->86.128.58.172:14312 [212.17.96.246:62447] ppp0 NAPT)
21:48:10, 11 Mar.
IN: ACCEPT [57] Connection closed (Port Forwarding: TCP 192.168.1.78:14312 <-->86.128.58.172:14312 [82.16.198.117:49942] TIME_WAIT/CLOSED ppp0 NAPT)
21:48:08, 11 Mar.
IN: ACCEPT [54] Connection opened (Port Forwarding: TCP 192.168.1.78:14312 <-->86.128.58.172:14312 [213.205.231.156:51027] CLOSED/SYN_SENT ppp0 NAPT)
21:48:04, 11 Mar.
IN: ACCEPT [57] Connection closed (Port Forwarding: TCP 192.168.1.78:14312 <-->86.128.58.172:14312 [89.153.251.9:53729] TIME_WAIT/CLOSED ppp0 NAPT)
21:47:54, 11 Mar.
IN: ACCEPT [54] Connection opened (Port Forwarding: UDP 192.168.1.78:14312 <-->86.128.58.172:14312 [80.3.100.12:37150] ppp0 NAPT)

Hi,
Thank you for the response. I think, but can't remember for sure, that UPnP was already switched off when I captured that log. Anyway, even if it wasn't, it is now. So I will see what gets captured in my logs.
I've just had to restart my Home Hub because of other connection issues and I notice that the first few entries are also odd:
19:35:16, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49250->173.194.78.125:5222 on ppp0)
19:34:45, 12 Mar.
OUT: BLOCK [15] Default policy (First packet in connection is not a SYN packet: TCP 192.168.1.78:49266->173.194.34.101:443 on ppp0)
19:34:31, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49250->173.194.78.125:5222 on ppp0)
19:34:31, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49266->173.194.34.101:443 on ppp0)
19:34:04, 12 Mar.
OUT: BLOCK [15] Default policy (First packet in connection is not a SYN packet: TCP 192.168.1.78:49462->199.59.149.232:443 on ppp0)
19:33:46, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49250->173.194.78.125:5222 on ppp0)
19:33:46, 12 Mar.
IN: BLOCK [12] Spoofing protection (IGMP 86.164.178.188->224.0.0.22 on ppp0)
19:33:45, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49266->173.194.34.101:443 on ppp0)
19:33:39, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49462->199.59.149.232:443 on ppp0)
19:33:33, 12 Mar.
OUT: BLOCK [15] Default policy (First packet in connection is not a SYN packet: TCP 192.168.1.78:49463->199.59.149.232:443 on ppp0)
19:33:29, 12 Mar.
IN: BLOCK [15] Default policy (UDP 111.252.36.217:26328->86.164.178.188:12708 on ppp0)
19:33:16, 12 Mar.
IN: BLOCK [15] Default policy (TCP 193.113.4.153:80->86.164.178.188:49572 on ppp0)
19:33:14, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49266->173.194.34.101:443 on ppp0)
19:33:14, 12 Mar.
IN: BLOCK [15] Default policy (TCP 66.193.112.93:443->86.164.178.188:44266 on ppp0)
19:33:14, 12 Mar.
( 164.240000) CWMP: session completed successfully
19:33:13, 12 Mar.
( 163.700000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
19:33:05, 12 Mar.
BLOCKED 106 more packets (because of Default policy)
19:33:05, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49462->199.59.149.232:443 on ppp0)
19:33:05, 12 Mar.
IN: BLOCK [15] Default policy (TCP 213.1.72.209:80->86.164.178.188:49547 on ppp0)
19:33:05, 12 Mar.
BLOCKED 94 more packets (because of Default policy)
19:33:05, 12 Mar.
OUT: BLOCK [15] Default policy (First packet in connection is not a SYN packet: TCP 192.168.1.78:49330->173.194.67.94:443 on ppp0)
19:33:05, 12 Mar.
IN: BLOCK [15] Default policy (TCP 199.59.148.87:443->86.164.178.188:49531 on ppp0)
19:33:05, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49250->173.194.78.125:5222 on ppp0)
19:33:04, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49266->173.194.34.101:443 on ppp0)
19:33:04, 12 Mar.
( 155.110000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
19:33:04, 12 Mar.
( 155.090000) CWMP: Session start now. Event code(s): '1 BOOT,4 VALUE CHANGE'
19:32:59, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49266->173.194.34.101:443 on ppp0)
19:32:54, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49462->199.59.149.232:443 on ppp0)
19:32:53, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49330->173.194.67.94:443 on ppp0)
19:32:52, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49463->199.59.149.232:443 on ppp0)
19:32:51, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49266->173.194.34.101:443 on ppp0)
19:32:48, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49330->173.194.67.94:443 on ppp0)
19:32:47, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49266->173.194.34.101:443 on ppp0)
19:32:46, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49330->173.194.67.94:443 on ppp0)
19:32:46, 12 Mar.
BLOCKED 4 more packets (because of First packet is Invalid)
19:32:45, 12 Mar.
OUT: BLOCK [15] Default policy (First packet in connection is not a SYN packet: TCP 192.168.1.78:49461->199.59.149.232:443 on ppp0)
19:32:44, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49330->173.194.67.94:443 on ppp0)
19:32:44, 12 Mar.
BLOCKED 1 more packets (because of First packet is Invalid)
19:32:43, 12 Mar.
OUT: BLOCK [15] Default policy (First packet in connection is not a SYN packet: TCP 192.168.1.78:49398->193.113.4.153:80 on ppp0)
19:32:42, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49330->173.194.67.94:443 on ppp0)
19:32:42, 12 Mar.
BLOCKED 3 more packets (because of First packet is Invalid)
19:32:42, 12 Mar.
OUT: BLOCK [15] Default policy (First packet in connection is not a SYN packet: TCP 192.168.1.78:49277->119.254.30.32:443 on ppp0)
19:32:41, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49330->173.194.67.94:443 on ppp0)
19:32:41, 12 Mar.
BLOCKED 1 more packets (because of First packet is Invalid)
19:32:41, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49330->173.194.67.94:443 on ppp0)
19:32:38, 12 Mar.
OUT: BLOCK [15] Default policy (First packet in connection is not a SYN packet: TCP 192.168.1.78:49280->119.254.30.32:443 on ppp0)
19:32:36, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49330->173.194.67.94:443 on ppp0)
19:32:34, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49463->199.59.149.232:443 on ppp0)
19:32:30, 12 Mar.
IN: BLOCK [15] Default policy (TCP 66.193.112.93:443->86.164.178.188:47022 on ppp0)
19:32:30, 12 Mar.
( 120.790000) CWMP: session closed due to error: WGET TLS error
19:32:30, 12 Mar.
( 120.140000) NTP synchronization success!
19:32:30, 12 Mar.
BLOCKED 1 more packets (because of Default policy)
19:32:29, 12 Mar.
OUT: BLOCK [15] Default policy (First packet in connection is not a SYN packet: TCP 192.168.1.78:49458->217.41.223.234:80 on ppp0)
19:32:28, 12 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.78:49280->119.254.30.32:443 on ppp0)
19:32:26, 12 Mar.
( 116.030000) NTP synchronization start
19:32:25, 12 Mar.
OUT: BLOCK [15] Default policy (First packet in connection is not a SYN packet: TCP 192.168.1.78:49442->74.125.141.91:443 on ppp0)
19:32:25, 12 Mar.
OUT: BLOCK [15] Default policy (TCP 192.168.1.78:49310->204.154.94.81:443 on ppp0)
19:32:25, 12 Mar.
IN: BLOCK [15] Default policy (TCP 88.221.94.116:80->86.164.178.188:49863 on ppp0)

Ramifications of large number of connections.

Our application uses direct driver connections. We are thinking about increasing the number of connections in /etc/odbc.ini to a very large number.
(1) Are there any ramifications in increasing this attribute?
(2) I read that each connection takes 1 semaphore. Does TT use all the semaphores when odbc.ini is first read or as needed?
TimesTen 6.0.4
RedHat Linux
Thanks,
Linda

Hi Linda
The 'Connections' attribute will tell TimesTen what the maximum number of connections is expected to be to the data store. TimesTen will then pre-allocate one semaphore for each connection at the time the data store is loaded.
If you exceed this value (e.g. you set Connections to 200 and actualy make 300 concurrent connections) then you wont get an error, also TimesTen wont crash, but connections #201->300 will perform sub-optimally.
So I'd recommend you 1) work out what your maximum number of connections is 2) set the kernel parameters relating to semaphores appropriately (see the section in the install guide relevant to your OS for info on how to do this) 3) set the value in your odbc.ini 4) reload your data store.
Keep in mind that you are allowed ~2000 connections to a data store, and this figure also must include internal connections (like the rep agent, cache agent etc).
If you anticipate make a great number of connections, it is probably better to consider implementing a connection pool. There is documentation on this in the guides, and some examples can be found on how to achieve it in the demo directory.

I have a large number of PDFs documents stored on a windows pcthat I would like to access on my iPad mini even when not cBooking referenceonnected to a network.

i have a large number of PDFs documents stored on a windows pc that I would like to access on my iPad mini even when not connected to a network. Does anyone know a solution. Eg maybe card reader and a app.

Those devices have mixed results depending on the application. If the application does not support the device, then you are out of luck. There is no file manager in IOS to allow you to move files between folders because there are no folders that you can access. An app has to specifically support a storage location to access files.
It's not that bad. The app has to have the ability to accept data from another app. The latest memory dongles come with an ios app to access the external storage. You then transfer the pdf from dongle's app to your app. If your app can accept data from dropbox, it will be able to accept data from the memory dongle app.
Other solutions:
== "GoodReaderUSB is a practical and useful application whose main purpose is to help users transfer files and folders from their mobile device to PC effortlessly. It helps them to move and backup important data from their Apple device via a USB cable."
http://www.softpedia.com/get/IPOD-TOOLS/Multimedia-IPOD-tools/GoodReaderUSB.shtm l
== "iExplorer's disk mounting features allow you to use your iPhone, iPod or iPad like a USB flash drive."
http://www.macroplant.com/iexplorer/

AiO Remote Ink Levels etc not accessible with USB connection

My printer prints and scans just fine...except that it ran out of ink after about 15 pages. I'm trying to view the ink levels, but everything in the HP AiO Remote says it's not supported with the USB connection. There's no other way to connect my printer. I need to view the ink levels and be able to put in new ink, but I can't because the software isn't working right. Help?

Hi @HnnhSmth95,
I see by your post that you are unable to view the ink levels by a USB connection. I can help you with this, but I will need some more information.
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

TS1702 how can I remove large number of photos on my iPhone 4s from iTunes using a PC - Lenovo Think Pad - so that I can reduce the space used on the phone by 50%?

how can I remove large number of photos on my iPhone 4s from iTunes using a PC - Lenovo Think Pad - so that I can reduce the space used on the phone by 50%?

You don't need iTunes for that. Simply connect the iPhone to the PC where it will be recognized as a camera. You can then select the photos you wish to transfer, transfer them, and delete them.

A simple way in sending message on a large number of contacts?

Is there a simple way in sending a large number of contacts? I mean, i'll send my message on a group, i.e. "hello" to "classmates" group. I know it is present during ios4 & 5 version? Why now on ios7? How's that? Some of my contacts are changing new numbers so i can't add them to my inbox.

When a device that is connected to an icloud account has it's contacts deleted, the same contacts at icloud.com are also deleted and then the changes propagate to other computers and devices also connected to the same icloud account. In other words, the contacts are deleted everywhere. Also, any iOS backup to icloud does not include contacts or any of the other Apple data, like calendars, reminders, etc. The only way you can get that data back is if it was on a computer which has been frequently backed up. You restore the data from the backup. (This reference to "backup" is a local backup, it has nothing to do with icloud.)

HP Officejet Pro L7590 won't print correctly after it sits a few days Windows Vista USB connection

I have a HP Officejet Pro L7590 All In One. It all of a sudden will not print correctly after it sits a few days. I purchased a new black/yellow printhead recently and it did print well for about a week. If it sits a few days, it acts up again. All I have to do to fix it is take out the yellow/black printhead clean with sterile water on a q tip the printhead, put it back in, and walla it prints again until the next time I want to use the printer, and the same thing again. Today I printed out some pictures after not using the printer for 5 days, the pics had large vertical stripes in them, the stripes have colors in them. I cleaned the printhead and it worked perfectly. Any ideas. I have replaced the black cartride, and the yellow recently.
Thanks for any help

Rocky8,
This is a little outside our area of printing, but I'll try and help you the best I can. My question for you is the printer showing up under the USB menu in Parallels. If it's not showing up then you need to determine why the USB connection isn't showing up in your Parallels USB menu. This could be a couple of issues, but the one that I think might be happening is the version of the USB port your using. Can you verify that you're not connecting the printer via a USB 3.0 port. Try plugging into one of your other USB ports to see if the printer will show up in the parallels USB menu.
BT
Working for HP and here to help!

Creation of Large Number of Workbooks within short span

Hi,
In my Production server, User has created many Workbooks for their convenience.
Now, I am working on upgrading project. I want to create same amounts of workbook to my Development server. I know how to create but as quantity in thousands and connected with respective roles.
I would like to know if, there is any process to create workbooks other than usual manual process.
(I can check the list and not availability of Workbooks from TABLE AGR_HIER and after creating I can check the existence in same table.)
If any, let me know... shorted method to create lots of workbook in less time.
Thanks in Advance.
Devendra Meshram
Osaka

Hi,
I suppose there is no such process to Create Large number of Workbook in short Span.
I am marking it as Unasawered But, If anybody knows, then Let me know...
Thanks in Advance..
Devendra Meshram

Limiting the number of users/connections

We currently have a very large user community (120000)who will be accessing the portal for ESS/MSS functionality.
We would like to limit the number of users to around 20000. Any more connections should get a nice error message (rather than a standard IE no more connections or a time out message).
We can obviously throttle the number of connections via the load balancer or via max connections in unix. Is there any method in the Portal itself, that will automatically direct the users to a seperate web page in the event of pre determined number of users/connections being reached.
I have search high and low but can't find a solution.
Thanks in advance
Fenton

Hi Tim,
No, there is nothing like this as a standard functionality within the portal. Similar requests are regulary asked on SDN (like: restrict the number of users logging in as you ask, restrict the number of parallel logins of one user, and things like this).
A possibility would be to implement your own login module which tries to check how many users are online. All techniques - independent if on portal or on WAS side - that try to count this have the problem that they cannot be sure who is "online" as you have no definite information if a user is online or not; one can only use more or less heuristic methods.
Hope it helps
Detlev

Oracle Error 01034 After attempting to delete a large number of rows

I sent the command to delete a large number of rows from a table in an oracle database (Oracle 10G / Solaris). The database files are located at /dbo partition. Before the command the disk space utilization was at 84% and now it is at 100%.
SQL Command I ran:
delete from oss_cell_main where time < '30 jul 2009'
If I try to connect to the database now I get the following error:
ORA-01034: ORACLE not available
df -h returns the following:
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d6 4.9G 5.0M 4.9G 1% /db_arch
/dev/md/dsk/d7 20G 11G 8.1G 59% /db_dump
/dev/md/dsk/d8 42G 42G 0K 100% /dbo
I tried to get the space back by deleting all the data in the table oss_cell_main :
drop table oss_cell_main purge
But no change in df output.
I have tried solving it myself but could not find sufficient directed information. Even pointing me to the right documentation will be higly appreciated. I have already looking at the following:
du -h :
du -h8K ./lost+found
1008M ./system/69333
1008M ./system
10G ./rollback/69333
10G ./rollback
27G ./data/69333
27G ./data
1K ./inx/69333
2K ./inx
3.8G ./tmp/69333
3.8G ./tmp
150M ./redo/69333
150M ./redo
42G .
I think its the rollback folder that has increased in size immensely.
SQL> show parameter undo
NAME TYPE VALUE
undo_management string AUTO
undo_retention integer 10800
undo_tablespace string UNDOTBS1
select * from dba_tablespaces where tablespace_name = 'UNDOTBS1'
TABLESPACE_NAME BLOCK_SIZE INITIAL_EXTENT NEXT_EXTENT MIN_EXTENTS
MAX_EXTENTS PCT_INCREASE MIN_EXTLEN STATUS CONTENTS LOGGING FOR EXTENT_MAN
ALLOCATIO PLU SEGMEN DEF_TAB_ RETENTION BIG
UNDOTBS1 8192 65536 1
2147483645 65536 ONLINE UNDO LOGGING NO LOCAL
SYSTEM NO MANUAL DISABLED NOGUARANTEE NO
Note: I can reconnect to the database for short periods of time by restarting the database. After some restarts it does connect but for a few minutes only but not long enough to run exp.

Check the alert log for errors.
Select file_name, bytes from dba_data_files order by bytes;
Try to shrink some datafiles to get space back.

DBA Reports large number of inactive sessions with 11.1.1.1

All,
We have installed System 11.1.1.1 on some 32 bit windows test machines running Windows Server 2003. Everything seems to be working fine, but recently the DBA is reporting that there are a large number of inactive sessions throwing alarms that we are reaching our Max Allowed Process on the Oracle Database server. We are running Oracle 10.2.0.4 on AIX.
We also have some System 9.3.1 Development servers that point at separate schemas in this environment and we don't see the same high number of inactive connections?
Most of the inactive connections are coming from Shared Services and Workspace. Anyone else see this or have any ideas?
Thanks for any responses.
Keith
Just a quick update. Originally I said this was only with 11.1.1.1 but we see the same high number of inactive sessions in 9.3. Anyone else see a large number of inactive sessions. They show up in Oracle as JDBC_Connect_Client. Does Shared Service, Planning Workspace etc utilize persistent connections or does it just abandon sessions when the windows service associated with an application is shutdown? Any information or thoughts are appreciated.
Edited by: Keith A on Oct 6, 2009 9:06 AM

Hi,
Not the answer you are looking for but have you logged it with Oracle as you might not get many answers to this question on here.
Cheers
John
http://john-goodwin.blogspot.com/

Any network adapters with usb connection for mac?

Hi!
Sorry if this is posted in the wrong forum/section. But I need a better network adapter than what comes with my macbook. I need an adapter with usb connection. Found a lot of them, but only for windows Any software that can take a windows driver and "merge" it to the airport software on the mac os x?

Hello johannesharestad. Welcome to the Apple Discussions!
Other World Computing (OWC) carries a number of OS X-compatible USB wireless adapters that you many want to consider.

Internal Error 500 started appearing even after setting a large number for postParametersLimit

Hello,
I adopted a CF 9 web-application and we're receiving the Internal 500 Error on a submit from a form that has line items for a RMA.
The server originally only had Cumulative Hot Fix 1 on it and I thought if I installed Cumulative Hot Fix 4, I would be able to adjust the postParametersLimit variable in the neo-runtime.xml. So, I tried doing this, and I've tried setting the number to an extremely large number (last try was 40000), and I'm still getting this error. I've tried putting a <cfabort> on the first line on the cfm file that is being called, but I'm still getting the 500 error.
As I mentioned, it's a RMA form and if the RMA has a few lines say up to 20 or 25 it will work.
I've tried increasing the following all at the same time:
postParameterSize to 1000 MB
Max size of post data 1000MB
Request throttle Memory 768MB
Maximum JVM Heap Size - 1024 MB
Enable HTTP Status Codes - unchecked
Here's some extra backgroun on this situation. This is all that happened before I got the server:
The CF Server is installed as a virtual machin and was originally part of a domain that was exposed to the internet and the internal network. The CF Admin was exposed to the internet.
AT THIS TIME THE RMA FORM WORKED PROPERLY, EVEN WITH LARGE NUMBER OF LINE ITEMS.
The CF Server was hacked, so they did the following:
They took a snapshot of the CF Server
Unjoined it from the domain and put it in the DMZ.
The server can no longer connect to the internet outbound, inbound connections are allowed through SSL
Installed cumulative hot fix 1 and hot fix APSB13-13
Changed the Default port for SQL on the SQL Server.
This is when the RMA form stopped working and I inherited the server. Yeah!
Any ideas on what i can try next or why this would have suddenly stopped working after making the above changes on the server.
Thank you

Start from the beginning. Return to the default values, and see what happens. To do so, proceed as follows.
Temporarily shut ColdFusion down. Create a back-up of the file neo-runtime.xml, just in case.
Now, open the file in a text editor and revert postParametersLimit and postSizeLimit to their respective default values, namely,
<var name='postParametersLimit'><number>100.0</number></var>
<var name='postSizeLimit'><number>100.0</number></var>
That is, 100 parameters and 100 MB, respectively. (Note that there is no postParameterSize! If you had included that element in the XML, remove it.)
Restart ColdFusion. Test and tell.

Large number of USB connections

Similar Messages

Maybe you are looking for