Large PNG shows up red in version 9.0.115.0

For this project we did we used a very large PNG in the
background (about 9800px in width). I know it's not the most
efficient way of doing this... next time we'll probably chop it up
into smaller pieces.
The problem as of playerversion 9.0.115.0 is that this large
PNG shows up red in the background. I've tested it in FIrefox with
flashswitcher and in any version lower than this an higher than 8
it shows up perfectly. The problem seems to appear on a Mac as well
but i don't have one i can use to test this on.
I've put up a test version of the problem here:
http://clients.merge-media.com/ara/test/test.html
You can download the test fla here:
http://clients.merge-media.com/ara/test/test.zip
(25mb)
Does any of you guys know if there's a workaround for this or
maybe something to fix this?
Thanks in advance,
J.

Did anyone open a support case for this?
http://www.adobe.com/support/contact/
Important Note: These online forums are for user-to-user
discussions of Adobe products, and are not an official customer
support channel for Adobe. If you require direct assistance, or
prefer to contact Adobe support staff directly, please contact
Adobe support.

Similar Messages

Think the app will ever show the red number icon in the upper right corner? Be nice to quickly see if a new podcast is available.

Think this new app will ever show the red (new) number icon in the upper right corner? Be nice to know when a new version of a podcast is available...

Agreed. I do not want to keep opening the app to see if there is new episodes to listen to.

My voice in waveform shows in red while my other podcasters waveforms stay centered

Hi, internet,
My friends and I started a podcast and I'm the audio engineer. I noticed that my voice waveforms are different from my fellow podcasters. Their waveforms stay centered on the line and only increase vertically (above and below) based on their volume. Mine on the other hand does that but also gets uncentered. The waveform shows horizontal red lines in the middle. See picture below. The first couple seconds is my friend talking and the rest is me.
Please also see the sound file here: https://dl.dropboxusercontent.com/u/12007759/redline_waveform.wav.
My voice is kind of high in general so I'm guessing that's the cause but maybe I'm wrong. Am I setting my Open Broadcast Software settings incorrectly? Or my Windows 7 mic recording settings wrong?

Thanks for your suggestions.
Just to clarify, the audio track has multiple persons speaking - my friends' vocals are normal while my vocals are the ones with the DC offset issue. I'm not capturing vocals separately to save time.
I also forgot to mention that my headset was hooked into my USB keyboard (Logitech G110) via the USB port. So the chain should have been: Logitech G930 -> Wireless USB -> Logitech G110 via USB port -> On-board sound card (Realtek High Definition Audio) via USB port -> OBS set to force microphone/aux to mono, mix/aux boost 1x -> Logitech Gaming Software (latest version) -> latest drivers. However, I don't think the keyboard interface mattered because of my additional tests.
I've tried two of my old headsets now. I first tried plugging my G930's into my desktop PC directly in the back USB port. Still had the same issue.
I then tried my TekNMotion headset (cheap POS). Regular 3.5mm jacks. It worked! No redline and no need to do DC Offset Correction. No issue except I had to work around with the settings and I think the best setting was using AGC (auto gain controller) and setting the Recording to 70 percent.
I also tried an xStatic SP headset (also a POS but is compatible with Xbox 360). Output/playback is a 3.5mm cable but the microphone input is USB. Worked also. The microphone quality was decent. Probably a tiny bit better than TekNMotion. However, I dropped this headset a while back so there's a loud hissing noise coming from it. No settings would affect the hissing noise. (Gotta give this to Best Buy to recycle).
So I guess the issue must stem from the Logitech G930 headset and/or headset drivers. Yeah? No?
I also tried using the DC Offset Correction favorite on my audio. Thanks for letting me know about that Bob! The only issue with that is my voice still sounds like its passing through a filter. Is there anything technically bad about using the DC Offset Correction? I'm guessing audio professionals try to stay away from this and just use better equipment. Here's what my waveform looks like after its processed:
So I think my best bet is to start using my old $16 TekNMotion Yapster headset. It's not USB wireless like the G930's are and the ear cups are awful after wearing them for more than 10 minutes. However; they work I guess. I'll try them out for a few episodes.
Now I have to decide if I should keep switching between the $100 G930's and the TekNMotion OR just use the TekNMotion for everything I do on my computer. OR sell my G930's.

My ipad will not charge up. it just shows the red battery signal and then switches off

my ipad will not charge up. it just shows the red battery signal and then switches off. The same charger succesfully charges other idas so i know it is no the charger that is faulty.Any suggestions

Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom
BTW- Your profile shows you have iOS 6.1.4 installed. The max iOS for an iPad is 6.1.3. iOS 6.1.4 is for iPhones only.

Tried to open a file I created in Numbers a while ago which I modified on 11/4/13 and got a message that I needed a newer version of Numbers. When I went to the Mac App Store it shows that the new version is already installed. Any suggestions?

Tried to open a file I created in Numbers a while ago, which I modified on 11/4/13, and got a message that I needed a newer version of Numbers. When I went to the Mac App Store it shows that the new version is already installed and there doesn't seem to be a way to reinstall it. When I checked "About Numbers" on my MacBook it shows "Numbers '09 version 2.3". Any suggestions as to how I can get the new version installed?

Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.

How can I change a minus figure on a web page to show in red? Firefox3.6.8 winXP

How can I change a minus figure on a web page to show in red?

I would assume that the website sends negative number with a special CSS class code or uses JavaScript to to change the style afterward.
Did it ever work in Firefox?
Do you see a error in the Tools > Error Console regarding this problem?
"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

I have an iPad 1 that is currently showing software updated at version 5.1.1. Is it possible to update to iOS version 7 on this device? My goal is to get Garage Band on this device and the app store is telling me I need iOS version 7.

I have an iPad 1 that is currently showing software updated at version 5.1.1. Is it possible to update to iOS version 7 on this device? My goal is to get Garage Band on this device and the app store is telling me I need iOS version 7.

Hi,
If you really need to upgrade you can save a bit of money and get an older version than the ipad Air.
First, you can sell your ipad 1 to places like gazelle.com, cashforyourmac.com, sellyour mac.com, or many others out there. The sites I listed give you cash. At this point gazelle.com is giving $70.00 for any ipad 1 in 'good' condition. And cashforyourmac will give you $25.00 over what gazelle.com or sellyourmac.com offers you. Shipping is free.
Then, with that money, go the the Apple online certified refurbished store. As an example, a new 64gb Air costs $699.00. A refurbed 4th gen 64gb costs $529.00 and a 3rd gen 64gb costs $499.00. Personally, I'd skip the 3rd gen. So if you buy a 4th gen 64gb at $529.00 minus what you can get from a sale to above, you can get an ipad 4 64gb for just over $430.00, a savings of savings of about $270.00. (A new 32gb Air is $599.00, a 4th gen 32gb is $449.00, and a 3rd gen 32gb is not on the site right now.) Google it and check if you can get better offers anywhere else. But getting one from the Apple refurb store gives you an essentially new ipad and using the above sites, you're not locked in with a particular site which will give you a gift card and restrict you to their store/site.
Each Apple refurbished ipad (any version) comes with a new front and back cover, a brand new battery, same return policy, and a full one year warranty with 90 days of phone support. Each comes in a white box like a new ipad with the wall charger and usb cable. The only difference is that it says in small print on the bottom of the box that it is Apple certified refurbished. Also, if you buy refurbs, be sure to check the store many times a day. They can come and go quickly, so when you see what you want, buy it right away. Shipping is free and pretty fast. (We bought two a year and a half ago and they have been great!)
Hope this helps.

How do I unlock my ipod touch that shows a red disabled screen, and not been able to connect to the original computer it was sync to?

How do I unlock my ipod touch showing a red ipod disabled connect to itunes, with the disadvantage of not having the original computer that my ipod was sync to?

If you have a passcode to the screen lock that you've forgotten, you'll need to restore the iPod. Since you don't have the original computer, this will erase all the content on the iPod. For information and instructions, see:
http://support.apple.com/kb/ht1212
If that will not work, you'll need to put the iPod into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
Regards.

Though i cleared GL by F.13, still in fbl3n report items are showing in red

Hi Experts,
Though i cleared the gl line items up to the date through f.13,but when i run the fbl3n report up to the date, items are showing in red.& balance is zero.please advice

Hello,
Please make sure that you have REMOVED the check box TEST RUN
If you do not remove the TEST RUN check box it only shows in simulation mode but nothing will be cleared.
There is no way that once it is being cleared it will be shown as open items. Otherwise SAP will not show them in green.
Please check your automatic clearing configure in OB74
Thanks,
Ravi

HT5622 My Ipod Classic shows a red circle with a cross in the middle. I've completed diagnostic tests which have popped up, however any HP/FW/Hard Drive tests freeze the ipod, as if the hard drive won't spin. What do I do?

My Ipod Classic shows a red circle with a cross in the middle. I've completed diagnostic tests which have popped up, however any HP/FW/Hard Drive tests freeze the ipod, as if the hard drive won't spin. What do I do?
After holding down the Select and Play/Pause button, I was able to restart the Ipod and then it brought me to a Diagnositc test. I have tried doing both the Mannual and Annual test on the ipod however in each test, the ipod freezes on different access tests. The HP (headphones) test, shows the headphones are detected, but then if it tries to play a song to make sure they work it freezes and goes back to the red cross. I have looked at various other questions regarding the FW cable, however I don't believe i have such a cabel. Then the Hard Drive test freezes up and I can hear a ticking noise coming from the drive but it doesnt seem to be spinning. Alongside these test issues, any computer cannot see the Ipod when plugged in (including itunes). Therefore some tests for the USB drive cannot be completed. I do not recall dropping it badly, though I have dropped it previously. Does all this mean there is damage to the drive? Should I instead take it to an apple store?
Many Thanks

The stats look fine. Try the DFU Restore method shown in Corrupt iPod classic. It may pay to disable any anti-virus software and use the staged transfer method to reload data, assuming you get that far.
tt2

In an album, many pictures would show on the screen and double clicking one would enlarge it for adjustments. Now one larger photo shows and along the bottom severa smaller ones. Options which used to be at the top right of screen no longer show. Whel

In Aperture album about 16 photos would show on screen and double clicking on one would enlarge it for adjustments. Now one larger image shows with about 7 photos at bottom. Options for controlling this no longer appear at top right. How do I correct this?

Do you mean the "View" controls are missing in your Toolbar?
To add these controls back to the Toolbar, use the View menu and select "Customize Toolbar". Drag the View Controls back to the Toolbar.

IMovie volume meter shows much red peaking but audio waveform shows none

When I play my movie, the volume meter in iMovie shows peaking in the red (distortion) all over the place, but in the audio waveform there is not one place where it peaks into the red (or even the yellow). The whole wave is very close to the 0db line. It sounds great when I play it and still great after I export it. But, once I upload it to YouTube, there is awful distortion all over the place just like the volume meter in iMovie indicates. I can't find any place to turn down output so the volume meter doesn't peak and I don't want to turn my audio waveform down below 0db and lose all of my volume. I already tried clicking on the Normalize Clip Volume in Audio Adjustments and that didn't seem to change anything, still peaking like crazy in the volume meter. What can I do to get rid of the red peaking and distortion?
Here's a little more info for anyone who can help with my problem. I am using iMovie 11 on an i7 iMac with Lion. I turned the audio of my video all the way down and imported another audio that had been compressed in Pro Tools to show no red peaks whatsoever. Can someone please help?
Thanks,
Loribella

When I play my movie, the volume meter in iMovie shows peaking in the red (distortion) all over the place, but in the audio waveform there is not one place where it peaks into the red (or even the yellow). The whole wave is very close to the 0db line. It sounds great when I play it and still great after I export it. But, once I upload it to YouTube, there is awful distortion all over the place just like the volume meter in iMovie indicates. I can't find any place to turn down output so the volume meter doesn't peak and I don't want to turn my audio waveform down below 0db and lose all of my volume. I already tried clicking on the Normalize Clip Volume in Audio Adjustments and that didn't seem to change anything, still peaking like crazy in the volume meter. What can I do to get rid of the red peaking and distortion?
Here's a little more info for anyone who can help with my problem. I am using iMovie 11 on an i7 iMac with Lion. I turned the audio of my video all the way down and imported another audio that had been compressed in Pro Tools to show no red peaks whatsoever. Can someone please help?
Thanks,
Loribella

How to Create Windows ISO Show Only One Windows Version

Dear,
I want to create Windows ISO server for 2012, but I want this ISO show me only one version of the Windows for example, I have Core version, Standard, DataCenter etc..So I don't need after I create ISO to show me all those choose versions, I need show me
only for example windows standard version during windows server 2012 installation, kindly I need steps to create this ISO.
Thanks..

Hi Dana.Kadi,
You use WIM file and oscdimg tool to create a bootable ISO image, you can refer the following similar thread:
WIM to ISO or what
https://social.technet.microsoft.com/forums/windowsserver/en-US/164c629a-c702-4b46-b3a2-6441e7e7f6ed/wim-to-iso-or-what
making bootable dvd for loading install.wim image
https://social.technet.microsoft.com/forums/windows/en-US/882d06e8-1ff5-4aff-bc5b-3418707015c5/making-bootable-dvd-for-loading-installwim-image
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Need documents to show that ADOBE AIR version 2.0.3 is compatible with Windows 7

Need documents to show that ADOBE AIR version 2.0.3 is compatible with Windows 7
Kindly send me Document proof for the same

http://helpx.adobe.com/air/kb/troubleshoot-air-installation-windows.html

Purchased CS6 applications showing up as "trial version"

Since a few days all applications of my purchased Creative Suite 6 Master Collection show up as "trial version" (29 days left). Any clues?

Thanks for this suggestion – highly appreciated!
Unfortunately, the solution provided on http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html does not work in my case. This is because the deactivation option under Help > Deactivate is greyed out. Any attempt to (re-)license the product using my CS6 serial number results in the notification that this serial number is 'invalid' (for which there is no reason).
I am running CS6 under Windows 8 and the problem seems to coincide with the latest update of the Creative Cloud panel that controls the updates tot the CS6 applications.
Please react, not only if you have other suggestions, but also if you are experiencing the same problem.

Large PNG shows up red in version 9.0.115.0

Similar Messages

Maybe you are looking for