LaserWriter NT Quick Setup Guide Available

While digging through my pile of Apple stuff, I came across a used, but original, copy of LaserWriter NT Quick Setup Guide, document #031-0057-A (note: just the guide, not the printer.) This guide is for a very ooold printer, but knowing that one person's 'not needed' (I hesitate to say junk) is another's 'wanted', I am offering this free to the first responder.

I think this is what you are looking for -
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808d1a7c.shtml#asdm
Thanks,
Tarik Admani
*Please rate helpful posts*

Similar Messages

  • X3000 quick setup guide, webpage not found

    Two problems:
    1. My x3000 wireless mouse that came bundled with the HP  computer does not work. I followed the skimpy directions that came with the mouse but got nothing. The mouse lights up underneath so I appears to be on but it still does not work.
    2. I desided to visit the HP website for help. Did a search and found a webpage with a link to download the Quick setup guide and another link which say "download manual. Clicking on either link sent me to a page that says "The webpage could not be found" 
    I wonder if I can return it to the retailer since I just bought it this month.
    Currently I am using a wireless mouse from my 2nd (old) computer and it works fine. But I have to carry it from room to room. (one mouse, two computers).

    Hi Sunil,
    EhP1 for Solution Manager means you have at least SPS18. Therefore documentation based on EhP1 is still valid, although Maintenance Optimizer has been updated as of SPS22+
    You can refer to this guide: https://websmp106.sap-ag.de/~sapdownload/011000358700002003492008E
    And also this help documentation: http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm
    Regards,
    -Rohan

  • Enterprise Portal Sneak Preview, quick installation guide

    Hello,
    Two or three months ago I have installed the SAP NetWeaver Enterprise Portal Sneak Preview SP9. For this purpose I have used the quick installation guide which formerly could be found under the following web-address:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/quick installation guide for sap netweaver ep on maxdb,%20Developer%20Edition%20Sneak%20Preview.htm
    Some of my colleagues would like to install the same release now but the quick installation guide is not available any more.
    Can anybody tell me where the quick installation guide is or which installation guide I can use instead for SP9?
    Thanks!

    Hey Guys,
    I have mailed it to your ID's.
    In case anyone else needs it, you can mail me directly:
    [email protected]
    Wish you all a successful installation ...
    Cheers,
    Gaurav

  • Are printed versions of Aperture User Guides available??

    Does anyone know if there are printed/bound versions of Aperture User Guides available, either through Apple or a 3rd party?
    PDF's and the help menu are fine when you're on the computer and need a quick answer. However, I also like to have a nice book version to take and read at night, when traveling, etc...
    I would certainly pay (a reasonable amount) for such a book, but when I explored getting the PDF printed/bound at a local Staples, they wanted some outrageous amount ($160 or so), due to it being in color and 400+ pages.
    Ideally, I'd like a version similar to the "Getting Started" manual that came with Aperture.
    Regards
    Tom

    I agree, as I often prefer to sit down and read the manuals away from the computer, etc..
    I can understand why Apple doesn't ship printed versions in the box (extra cost, shipping, etc) and provides a free PDF instead. However, it seems like they could offer a printed version for a price on their on-line (and retail) stores for those so inclined to pay for it. They already have the manuals generated, they just need to make them available.
    In the meantime, I guess we wait for someone to bring an Aperture 1.5 book to market. Problem there is that by the time someone else puts one out, Aperture will be up to rev 1.6 or something...
    -Tom
    Powermac Quad 2.5Ghz, 5GB, GeForce 7800GT Mac OS X (10.4.8)

  • Setup guide and prerequisites for BI IP

    Hi all. I have been trying to find a setup guide/installation guide for SAP BI IP. Like a step by step guide with prerequisites and such. Is there a place on SAP.com where I can find this or where should I start searching for this? I've tried searching the forums - but it seems that either the forums searchengine is broken, or there is something wrong with my computer. I just can't find any matches... for anything... Weird.
    Thanks in advance.
    //Anders

    Thanks guys. Couldn't really find any installation details/prerequisites on this site though: Integrated Planning Links
    The note 1000009 talked about the ASU-toolbox. I presume this is another thing that you have to install before you can use it? Is it available per default in the BI delivery or is it another GUI/program for this?
    All I really want is to find "How to install BI Integrated Planning" and "This is what you need to run Integrated Planning"
    It almost feels impossible sometimes to find installation guides and how-to's regarding the more basis part of an implementation.
    So any takers on this? Am I just looking in the wrong places, and if so, please guide me to the right place!
    Thanks in advance.
    //Anders

  • Google Play closes on start after ICS upgrade on Arc S, accounts and sync empty, setup guide problem

    I upgraded my arc s to ics 4 days ago, i used google play for the first time after upgrade today. It closes on start. I checked Accounts and Sync, my google account is not there, the whole list is just... empty. I tried the setup guide, at the step they ask to connect to services and sync, i clicked the google button, click and click and click, nothing, all the other icons work (like facebook), i searched for gmail app, non existent....... Seems too late to ask for help but im repairing my phone using pc companion now, hope everything works again.... just powered on my phone, i have a feeling nothing will be changed... really sad that Sony didnt realise this.... i cant access google services at all....plain weird
    Solved!
    Go to Solution.

    if I were you I would repair the phone with SUS and see if that solve the issue
    Update Service (SUS)
    http://www.sonymobile.com/gb/tools/update-service/
    http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe

  • Setup guide K7N420pro the way I did it(Written by Bas)

    Setup guide K7N420pro the way I did it
    Hi there, (revised 19-march-2002, thanks Glenn!)
    This article describes how I build my K7N420pro system and how to make it stable.
    MAKE SURE YOU HAVE DISCHARGED ANY STATIC ELECTRICITY FROM YOUR BODY BEFORE HANDLING ANY COMPONENTS.
    It is recommended to use an antistatic wristband if you have one.
    When you remove the motherboard from the packaging, put the board on a table with some cardboard under it, make sure there is no metal stuff under it (that can cause shorts and unnecessary posts on this forum)
    Clear the CMos first, this is done by setting the jumper JBAT to position 2-3 for 5 seconds, then put it back to position 1-2.
    (Check the board for pin 1 of this jumper as some manuals have an error on this!!!) Just remember to refer to the printing on the motherboard itself and keep in mind that pins 1&2 are default settings for any 3 pin jumper configuration.
    Check the CPU socket for the little yellow-stripe, bend it carefully in such a manner that it will make contact with the CPU. (I think he's talking about the the temp sensor here, I do not recommend bending or even touching this sensor unless for some reason it was mashed into the mobo. If you must, make sure your fingers are dry or cleaned with alcohol to remove any hand oils)
    Now insert the CPU into the socket, very little pressure is needed, if any. It fit's only 1 way!!!
    (do not apply thermal paste yet)
    Remove the pink-stuff on the heatsink if it's on there, and clean it with alcohol or nail polish remover. If you use Nail polish remover give it a once over with alcohol to cut any moisturizers that may have been added. Nail polish remover will work on some thermal pads where alcohol would only prepare it for surgery.
    Now check very carefully how the Cooler must be mounted!!!
    Take your time and do a test run (do not apply thermal paste yet) by attaching the front clip first by holding the hs/fan assembly above the cpu with one of your fingers holding the tension clip down and hooking it on the front plastic clip and then resting the heatsink on the cpu's rubber pads (it is not necessary to fasten the other retaining clip, remember this is a trial run).
    This way you can see how it fits and you can make sure there is enough clearance from any components. You can do this a couple of times, this way when you have applied the thermal paste, set the heatsink down and fasten the clip, there will be minimal movement between the die and the heatsink, wich can squeeze too much thermal paste out of position and create air pockets. Then there's that problem of cracking the die.
    Put some silver-grease on the die of the CPU, follow the directions from Arctic Silver.
    After you have done this connect the fan connector to the CPUFAN1 header, but only if it's a normal 4000-6000RPM cooler, if it's a High-speed-fan connect it directly to the powersupply!!!!
    Now make sure jumper SW2 is set to Auto-mode.
    Short the jumpers JA1 if you want the sound to come from the connectors near the parallel-port.
    Put the ram-stick(s) on the board in slot1&2, press them firmly until the plastic-clips click into them.
    Check your powersupply and make sure it can handle the power needed by this board and the CPU, most good 300W will do.
    Check the case for the metal-spacers you need between the board and the case, make very sure that they are all placed right and that there are not too many!!!!
    Now you are ready to place the board into the case....
    Connect all the other stuff and power the system ONLY after you double checked everything.
    Make sure that the harddisk flat-cable is connected with the blue connector to the board.
    When it starts, go into the BIOS and load the BIOS Setup Defaults, after that goto the Frequency/Voltage Control section and only change the CPU FSB/DRAM/AGP Clock setting to this:
    Duron -> 100/266/66 or 100/200/66
    Athlon 200FSB -> 100/266/66 or 100/200/66
    Athlon 266FSB -> 133/266/66
    Athlon XP -> 133/266/66
    Goto advanced BIOS Features and Disable APIC (it's mostly disabled by default)
    Change the boot sequence to:
    First boot device Floppy
    Second Boot device CDrom
    Third Boot device HDD-0
    (After your OS is setup you can just setup your First Boot Device as HDD-0 and disable the others. Actually I just use First Boot Device and toggle to what I need as I go, you will have to monitor your OS installation at first untill the first reboot, you must enter the BIOS and switch it from the CD/ROM to the HDD-0 or it will loop.)
    Goto the Integrated Peripherals section MCP OnChip PCI device and disable/enable what you need or don't need.
    Now save the stuff and put your Win2000 (or XP) CDrom into the first CDrom drive you have.
    Let it boot and create your partitions, it's best to format your system drive to FAT32 (NTFS is slower) and make sure it's not bigger then 32GB or you can't format it FAT32 under Win2000 (don't know about XP). I would recommend FAT32 over NTFS on both 2000 and XP. (Some people will disagree with me)
    Make sure you use an account name with normal characters, so don't use 臄 or whatever, or you may/will get into trouble installing drivers.
    After Win2000 (XP) has been installed, install ServicePack2 and Dirtectx 8.1 for Win2000 (XP has those allready).
    Stay away from using the drivers on the disk supplied.
    Then install the nForce 1.0 ref-drivers, can be downloaded from MSI or
    http://www.nvidia.com/
    After this you should be able to rock-and-roll
    When you have problems with certain devices, you could try the BIOS 2.3, but don't use the LiveBIOS to do this, read my other article on "How to flash a BIOS"
    Written by Bas

    i cant get my computer to play any high end games like alice or unreal or any thing like that or Madden NFL 2003 i have windows 2000 was working with xp home my computer restarts every time. tell me some thing it restarted with xp as well some games take me back to desk top :O

  • Quick Start Guide Info not working. Need info for Job Interview

    I am brand spanking new to Java but I have a job interview next week and this is one of the topics I need to learn a little about. Here is my issue if someone would kind enough to help.
    I downloaded and installed SDK and JDK I am going through the quick start guide I am using the Quick Start guide that comes with Application Server PE 9. The quick start guide requires you to download a "Tutorial Bundle" that comes with the Java EE 5 Tutorial.
    The Quick start guide then tells you to access certain files that are in the Tutorial bundle. For example it wants me to go to /Samples/Quickstart directory in the tutorial bundle and look for the hello.war. Unfortunately that directory and file does not exist (there is an /examples/web/hello1 directory but no hello.war
    Long story short is there anyway to find a Tutorial Bundle that actually works with the software that I downloaded? Thanks in advance for your help

    I found another guide. Thanks anyway

  • Cannot find class CustomerFacadeRemote in NetBeans IDE 5.0 Quick Start Guid

    Hi,
    I am new to Sun Java Studio Enterprise 8.1. I am follwing NetBeans IDE 5.0 Quick Start Guide for J2EE Applications example and got two following errors:
    C:\SunStudioWS\CustomerBook\CustomerBook-war\src\java\web\CustomerDetail.java:41: cannot find symbol
    symbol : class CustomerFacadeRemote
    location: package ejb
    ejb.CustomerFacadeRemote custFacade = lookupCustomerFacadeBean();
    C:\SunStudioWS\CustomerBook\CustomerBook-war\src\java\web\CustomerDetail.java:41: cannot find symbol
    symbol : method lookupCustomerFacadeBean()
    location: class web.CustomerDetail
    ejb.CustomerFacadeRemote custFacade = lookupCustomerFacadeBean();
    2 errors
    C:\SunStudioWS\CustomerBook\CustomerBook-war\nbproject\build-impl.xml:299: The following error occurred while executing this line:
    C:\SunStudioWS\CustomerBook\CustomerBook-war\nbproject\build-impl.xml:141: Compile failed; see the compiler error output for details.
    BUILD FAILED (total time: 1 second)
    Here is the code:
    * CustomerDetail.java
    * Created on July 23, 2007, 3:27 PM
    package web;
    import java.io.*;
    import java.net.*;
    import javax.servlet.*;
    import javax.servlet.http.*;
    * @author yl
    * @version
    public class CustomerDetail extends HttpServlet {
    /** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
    * @param request servlet request
    * @param response servlet response
    protected void processRequest(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException {
    response.setContentType("text/html");
    PrintWriter out = response.getWriter();
    out.println("<html>");
    out.println("<head>");
    out.println("<title>Servlet customerDetail</title>");
    out.println("</head>");
    out.println("<body>");
    out.println("<h1>Servlet customerDetail at " + request.getContextPath () + "</h1>");
    String customerNr = request.getParameter("customer_nr");
    if((customerNr != null) && !(customerNr.equals("")))
    try{
    ejb.CustomerFacadeRemote custFacade = lookupCustomerFacadeBean();
    out.println("Customer's info for nr. " + customerNr + ": " + custFacade.getCustomerInfo(
    Integer.parseInt(customerNr)));
    }catch(javax.ejb.FinderException ex){
    out.println("Customer with nr. " + customerNr +" not found");
    out.println("<form>");
    out.println("Customer number: <input type='text' name='customer_nr' />");
    out.println("<input type=submit value=Select />");
    out.println("</form>");
    out.println("</body>");
    out.println("</html>");
    out.close();
    // <editor-fold defaultstate="collapsed" desc="HttpServlet methods. Click on the + sign on the left to edit the code.">
    /** Handles the HTTP <code>GET</code> method.
    * @param request servlet request
    * @param response servlet response
    protected void doGet(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException {
    processRequest(request, response);
    /** Handles the HTTP <code>POST</code> method.
    * @param request servlet request
    * @param response servlet response
    protected void doPost(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException {
    processRequest(request, response);
    /** Returns a short description of the servlet.
    public String getServletInfo() {
    return "Short description";
    // </editor-fold>
    private web.ServiceLocator serviceLocator;
    private web.ServiceLocator getServiceLocator() {
    if (serviceLocator == null) {
    serviceLocator = new web.ServiceLocator();
    return serviceLocator;
    private ejb.CustomerFacaderRemote lookupCustomerFacaderBean() {
    try {
    return ((ejb.CustomerFacaderRemoteHome) getServiceLocator().getRemoteHome("java:comp/env/ejb/CustomerFacaderBean",ejb.CustomerFacaderRemoteHome.class)).create();
    } catch(javax.naming.NamingException ne) {
    java.util.logging.Logger.getLogger(getClass().getName()).log(java.util.logging.Level.SEVERE,"exception caught" ,ne);
    throw new RuntimeException(ne);
    } catch(javax.ejb.CreateException ce) {
    java.util.logging.Logger.getLogger(getClass().getName()).log(java.util.logging.Level.SEVERE,"exception caught" ,ce);
    throw new RuntimeException(ce);
    } catch(java.rmi.RemoteException re) {
    java.util.logging.Logger.getLogger(getClass().getName()).log(java.util.logging.Level.SEVERE,"exception caught" ,re);
    throw new RuntimeException(re);
    Thank you very much for any help.
    ylou

    In the code you have posted, some places refer to '.CustomerFacader' while others refer to '.CustomerFacade' leading to issues.
    Also: Have you considered using NetBeans 5.5.1 as an alternative to JSE 8.1?
    http://forum.java.sun.com/thread.jspa?threadID=5192837

  • Setup guide for Maintenance Optimizer in solman 7.0 ehp1 sp18

    Hi All ,
    Please let me know the exact link where I can find the setup guide for Maintenance Optimizer in Solman 7.0 EHP1 sp18 .
    I found a few guides but was not able to locate the correct guide for this particular version.
    Thanks
    Sunil Kumar

    Hi Sunil,
    EhP1 for Solution Manager means you have at least SPS18. Therefore documentation based on EhP1 is still valid, although Maintenance Optimizer has been updated as of SPS22+
    You can refer to this guide: https://websmp106.sap-ag.de/~sapdownload/011000358700002003492008E
    And also this help documentation: http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm
    Regards,
    -Rohan

  • Quick start guide for WL Portal 10.0 required

    Hi all,
    I am new to BEA WebLogic Portal but have a lot of experience on open-source portal frameworks. After downloaded a copy of the latest 10.0 version I want to have a try how it looks like. What I want is a quick start guide which will answer the following two questions.
    1) I think there is an example portal installed with a full installation of WL Portal 10.0, how to start up the server and access the url?
    - Start up script seems to be $WL_HOME/samples/domains/portal/startWebLogic.sh
    2) A quick start guide is required to demonstrate how to deploy a JSR 168 portlet inside WL Portal.
    Thanks in advance,
    X. Yang

    hi
    i havent used 10.0 but if you check the logs/system.out it should print out which ip and port the server is listening on when it starts up and using that login to the console or u can check the config files for the ip/port(ip:port/console) and weblogic/weblogic and you should be able to find out from your deployed ear and its descriptors what the url to access the app is
    I assume your not using windows because then there is an entry in your program files.
    regards
    deepak

  • PSE11 Why does Sharpening not work in Quick or Guided Mode?

    I have used PSE 5 happily and greatly liked the auto sharpen feature. I have been forced to upgrade to PSE 11 due to Windows 8 incompatibility with 5.
    I am appalled to find that the sharpen feature, including auto, does not work in Quick or Guided modes. The small previews in Quick mode show the correct sharpening effect but clicking on them or using the slider does not transfer to the main image. I either have to go into full unsharp mask, which I hate for quick fixes, or use the 'adjust sharpness' option under 'filter' in Quick or Guided Mode, which increases sharpness by an unspecified amount on each click.
    Surely there si something wrong here. The feature is there so why doesn't it work?
    Any ideas would be welcome. If it isn't fixable I shall want a refund based on the product not being fit for purpose.
    Thanks
    dlgoodyear

    Thanks for confirming that it should work ok. I've now done the obvious and uninstalled/reinstalled and it's fine now.
    Dave

  • ANN: Adobe Lightroom 5 - Quick Start Guide free download

    I'm pleased to announce the release of Adobe Photoshop Lightroom 5 – Quick Start Guide, which is a FREE 76 page PDF eBook.  It’s designed to help you get started with Lightroom and understand the basics, while avoiding the most frequent problems.
    You can download the PDF at: http://www.lightroomqueen.com/free-downloads/quickstart/lr5/
    I meet a lot of people on the forums who have ended up in a tangle because they’ve misunderstood the basics, and much as I’d like to meet you, I’d prefer it’s not because you’ve accidentally deleted all of your photos!

    Victoria Bampton wrote:
    Hi Bill.  I hope you find it useful!  Where did you register - in the Members Area or for the mailing list?  I'll track it down!  Scratch that, I've tracked you down in the Members Area.  You are registered, but there's a bug in the software that didn't send the email.  Thanks for letting me know.
    Thanks.  I was trying for the email list!  Yes, I like junk mail about things that interest me.  Being a "Member" sounds better than just getting email.
    Bill

  • Just FYI, new blog post "More Windows Server 2008 Guides Available in TechNet Gallery"

    Just FYI, new blog post "More Windows Server 2008 Guides Available in TechNet Gallery" at
    http://aka.ms/Sqatv1
    Thanks -
    James McIllece

    Hi James,
    Thanks for your sharing!
    Best Regards.
    Steven Lee
    TechNet Community Support

  • How to make "Utility" button in Printer Setup Utility available

    There, i add a printer in the Printer Setup Utility and select it. i want to open printer utility, but the "Utility"
    button in Printer Setup Utility is dimmed. In addition,
    "Printer\Configure printer" in the Printer Setup Utility menu is also dimmed.
    How to make "Utility" button in Printer Setup Utility available?
    Thanks in advance.

    Hi Jiong,
    That button is to acess the printer utility for that particular printer, not all printers come with a utility. If you have the disk that came with your printer, you can see if it has a Macintosh driver, if it does then it mimght have the utility with it. It's pretty hard to run the utility on its own, its burried somewhere in the system so that's why you have that menu item. You can alternatively go on the internet and download the latest driver, which might have a utility. All the utility will do will give you options to check nozzle patterns, alighnement, ink tank levels, and cleaning options - just mimnor maintenence junk, non-essentials, etc. I think Tiger just comes with a whole heap of generic drivers for different printer lines, can't say for sure.
    I wouldn't worry about it, especially if you have a relatively old printer.
    Hope that helps
    DKR

Maybe you are looking for