Google Play closes on start after ICS upgrade on Arc S, accounts and sync empty, setup guide problem

I upgraded my arc s to ics 4 days ago, i used google play for the first time after upgrade today. It closes on start. I checked Accounts and Sync, my google account is not there, the whole list is just... empty. I tried the setup guide, at the step they ask to connect to services and sync, i clicked the google button, click and click and click, nothing, all the other icons work (like facebook), i searched for gmail app, non existent....... Seems too late to ask for help but im repairing my phone using pc companion now, hope everything works again.... just powered on my phone, i have a feeling nothing will be changed... really sad that Sony didnt realise this.... i cant access google services at all....plain weird
Solved!
Go to Solution.

if I were you I would repair the phone with SUS and see if that solve the issue
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe

Similar Messages

  • After ICS upgrade Phone is very slow to make a call

    After ICS upgrade , when I select a contact to call , and then press cell or home , the response time is very slow.
    I have pressed the call button more than once thinking it did not take. Then when it does take I end up calling the person
    more than once because it has buffered the calls . What can be causing this ?
    If you have an answer Please email me at: Personal email address removed to comply with VZW ToS<     Thanks
    Message was edited by: Verizon Moderator

    Mine and my wifes thunderbolts have become horrible since the upgrade was pushed.  Apps are slow, or don't even load some times.  Trying to make a phone call is sluggish and at times it will try to call twice at the same time for some reason.
    however, i overlooked all of this because i liked the look of ICS.  then last week after being pushed two updates in a row, it now will just turn off at random times.  i can't even go to a webpage anymore because it will immediately crash.  better yet, when i try to reboot the phone, it will get to the point where it recognizes the verizon network, and then just shut off again.  this happened to me 8 times in a row the other day.  it will also say that the battery is in the red, even though it had a full charge before the crash.
    i have found that if i plug my phone in and then boot it up, it will boot up correctly.  that is the only way i have been able to get it to actually boot up since all of this started happening.  it will still show the battery is about to die, and then about 15 minutes later it will show it is at 100% again.
    i tried to do the chat with a reprensentative today and the guy was asking for my account password before he could look into my issue.  what kind of company asks for a password.  that is the dumbest thing i have seen.  so now, i have a phone that "sometimes" works, and online chat that reminds me of a scamming site. 
    when my wife called to talk to someone they told her that it was htc's fault and that it would cost us $60 each to switch to new phones.  how is that customer service?  besides, verizon's network sent the update.  there is no way that they can try to say it wasn't their fault.  that isn't how the real world works.
    i have reposted this from another thread, but since there seems to be someone from VZW reading this, perhaps some info can be found...

  • HT1349 ITunes failed to start after an upgrade, won't allow me to re-install saying "Apple Mobile Device failed to start, check for sufficient priveleges"

    My ITunes library failed to start after an upgrade, now I'm unable to open or re-install.  Receive an error message stating that "apple mobile device failed to start, check to see that you have sufficient priveleges to run system".  Any help with this?  I've tried un-installing and downloading only to get the same message again.

    Thank you to "turingtest2", solution for someone else worked for me as well!

  • "disp+work" process in not getting started after kernel upgradation

    Hello Experts,
    Good day…..,
    I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
    I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
    I have posted “dev_W0” log &
    “disp+work” command result obtained in CMD prompt of respective server.
    Please help me out in this. Thanks all in advance.
    “dev_w0” Log”
    trc file: "dev_w0", trc level: 1, release: "741"
    *  ACTIVE TRACE LEVEL           1
    *  ACTIVE TRACE COMPONENTS      all, MJ
    M sysno      55
    M sid        TNG
    M systemid   562 (PC with Windows NT)
    M relno      7410
    M patchlevel 0
    M patchno    42
    M intno      20020600
    M make multithreaded, Unicode, 64 bit, optimized
    M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
    M pid        2392
    M
    M 
    M Wed Jul 23 02:04:35 2014
    M  kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
    M  length of sys_adm_ext is 500 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
    M  DpCommonParamInit: rdisp/core_file_size = default --> no change
    I  MtxInit: 30000 0 0
    M 
    M Wed Jul 23 02:04:36 2014
    M  DpIPCInit2: read dp-profile-values from sys_adm_ext
    M  DpShMCreate: alloate/attach shared memory (mode=ATTACH)
    M  DpShMCreate: sizeof(wp_adm)                         24288    (1104)
    M  DpShMCreate: sizeof(tm_adm)                          51472080             (256080)
    M  DpShMCreate: sizeof(ca_adm)                           432000  (72)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
    M  DpShMCreate: sizeof(comm_adm)                   7583152                (14904)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)                      0              (296)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)                         0              (80)
    M  DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
    M  DpShMCreate: sizeof(sock_adm)                       520080  (1016)
    M  DpShMCreate: sizeof(vmc_adm)                       0              (3208)
    M  DpShMCreate: sizeof(wall_adm)                        (ft=41664/fi=67472/hd=64/rec=192)
    M  DpShMCreate: sizeof(amc_rec_adm)                              (ft=86464/fi=67472/hd=64/rec=416)
    M  DpShMCreate: sizeof(websocket_adm)                         (ft=28864/hd=64/rec=272)
    M  DpShMCreate: sizeof(gw_adm)          64
    M  DpShMCreate: sizeof(j2ee_adm)       3936
    M  DpShMCreate: SHM_DP_ADM_KEY                  (addr: 00000000103D0050, size: 60433936
    M  DpShMCreate: allocated sys_adm at 00000000103D0250
    M  DpShMCreate: allocated wp_adm_list at 00000000103E20F0
    M  DpShMCreate: allocated wp_adm at 00000000103E2410
    M  DpShMCreate: allocated tm_adm_list at 00000000103E84F0
    M  DpShMCreate: allocated tm_adm at 00000000103E8730
    M  DpShMCreate: allocated ca_adm at 00000000134FF000
    M  DpShMCreate: allocated comm_adm at 0000000013568980
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: allocated sock_adm at  0000000013CA4130
    M  DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
    M  DpShMCreate: system runs without VMC
    M  DpShMCreate: allocated gw_adm at 0000000013D23560
    M  DpShMCreate: allocated j2ee_adm at 0000000013D237A0
    M  DpShMCreate: allocated ca_info at 0000000013D24900
    M  DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
    M  DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
    M  DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
    M  DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
    M  DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
    M  DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
    M  DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
    M  DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
    M  DpShMCreate: initialized 21 eyes
    M  DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
    M  DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  <ES> EsILock: use Semphore 33 for locking
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    X 
    X Wed Jul 23 02:04:37 2014
    X  mm.dump: set maximum dump mem to 96 MB
    M  ThStart: taskhandler started
    M  ThInit: initializing DIA work process W0
    M 
    M Wed Jul 23 02:04:44 2014
    M  ThInit: running on host ABTHMSSB01
    I  MtxInit: 0 0 0
    M 
    M Wed Jul 23 02:04:45 2014
    M  calling db_connect ...
    B  Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
    B  Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
    B  Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
    C  Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
    C  Register application info.
    C 
    C Wed Jul 23 02:04:47 2014
    C  Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
    C  Detailed Oracle client (patch) info not available.
    C  *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
    [dbsloci.c    2406]
    C     Only Secure Connect method possible.
    M  ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c   2281]
    M Wed Jul 23 02:04:48 2014
    M 
    M  Info for wp 0
    M 
    M    pid = 2392
    M    severity = 0
    M    status = 0
    M    stat = WP_NEW
    M    waiting_for = NO_WAITING
    M    workerType = DP_WORKER_DIAWP
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M mode_cleaned_counter = 0
    M    control_flag = 0
    M    report = > <
    M    action = 0
    M    tab_name = >                              <
    M 
    M  ThIErrHandle: no current incoming request
    M 
    M 
    M *****************************************************************************
    M  *
    M  *  LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
    M  *  ERROR ThInit: db_connect
    M  *
    M  *  TIME Wed Jul 23 02:04:48 2014
    M  *  RELEASE 741
    M  *  COMPONENT Taskhandler
    M  *  VERSION 1
    M  *  RC 16797709
    M  *  MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
    M  *  LINE 2470
    M  *  COUNTER 1
    M  *
    M  *****************************************************************************
    M 
    M  PfRejectStatistic: clear statistic record
    M  PfClearAllRec: clear statistic area
    M  PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hooks for event BEFORE_DUMP
    M  ThIErrHandle: entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
    “Desp+Work” Command result:
    C:\Users\tngadm>disp+work
    disp+work information
    kernel release 741
    kernel make variant 741_REL
    compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
    compiled for                  64 BIT
    compilation mode UNICODE
    compile time Jul  9 2014 16:39:46
    update level 0
    patch number 42
    source id 0.042
    RKS compatibility level 0
    supported environment
    database (SAP, table SVERS) 700
    710
    701
    702
    703
                                  711
    720
    730
    731
    732
    738
    740
    operating system
    Windows NT 5.1
    Windows NT 5.2
    Windows NT 6.0
    Windows NT 6.1
    Windows NT 6.2
    Windows NT 6.3
    C:\Users\tng

    C  *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
    [dbsloci.c    2406]
    C     Only Secure Connect method possible.
    For this issue you need to set up SSFS.
    1639578 - SSFS as password storage for primary database connect
    I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
    I have upgraded kernel version from 701 to 741
    Are you sure kernel 741 is compatible with an EHP 4 system ?
    Read this SAP note
    1969546 - Release Roadmap Kernel 740
    Regards
    RB

  • SLD will not start after I upgraded Netweaver 2004s Portal

    SLD will not start after I upgraded Netweaver 2004s Portal from SP 14 to SP 15.
    It gives me the following J2EE error:
    Application error occurred during request processing.
      Details:   java.lang.NoSuchMethodError: com.sap.sld.api.wbem.transform.ICIMParser.getNamePool()Lcom/sap/sld/api/wbem/cim/NamePool;
    Exception id: [00145E336A6A00680000002A000003480004502001E11FF0]

    Hi ,
    as a first question: What versions of WAS / NWDS are you using?! (Main question is if you are using corresponding versions, i.e. NWDS 2.0.x with WAS 6.40 SP x, with the same value for x.)
    See the threads below for more information
    NetWeaver 2004s upgradation problems
    Could not run WebDynpro Tutorial - NoClassDefFoundError
    Points are welcome if it is useful
    Koti Reddy

  • Itunes just won't start after the upgrade

    I've upgraded my itunes, and done all the double checks I've found on this site. My itunes just will not start after the upgrade. It's frustrating to say the least because I can't even access my libary or edit my ipod. I've tried everything including uninstalling and reinstalling.. please help! I wanted to put my audio books on my ipod for a roadtrip tomorrow!

    Thanks Katrina. I was able to find what I needed through the link that you provided.
    To those that are having this problem, here's what I did to fix this issue:
    +If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?+
    +1. Open AirPort Utility.+
    +2. From the AirPort Utility menu, hold the Option key *(Control key in Windows XP and Vista)* and choose Check for Updates....+
    +3. Select the specific firmware version you require.+
    +4. Click Download.+
    +5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.+
    +6. Choose Base Station > Upload Firmware.+
    +7. Select a firmware version and click OK.+
    +An important note about installing firmware+
    +After you have successfully installed a firmware update, AirPort Utility will wait for the AWD to restart. Once the AWD is available, AirPort Utility will display the standard configuration setup window with the Manual Setup and Continue buttons. Unless you intentionally wish to change some configuration of one of your apple Wireless Devices, you do not need to click Continue. At this point, simply quit AirPort Utility. Your AWD should be functioning correctly.+
    http://support.apple.com/kb/HT1218
    I chose firmware: Airport Extreme with 8-2.11n (Fast Ethernet) 7.3.2 Be patient, as Airport Utility will report that it can't find the AEBS, but after a short while mine was back. I did not roll back my version of Airport Utility.
    All appears to be normal and the iTunes library is rebuilding as I type this. Hopefully, Apple will figure out what's causing the problem with firmware 7.4.1

  • Hi all. When i try open illustrator cs6 i get the following message: to open illustrator cs6 you need to install the legacy java se 6 runtime. This started after i upgraded my mac to yosemite. I tried looking on java site but cannot find anything. Any sug

    Hi all. When i try open illustrator cs6 i get the following message: to open illustrator cs6 you need to install the legacy java se 6 runtime. This started after i upgraded my mac to yosemite. I tried looking on java site but cannot find anything. Any suggestions?

    Justin,
    In addition to what mo said, some have found that the page with the direct download link,
    http://support.apple.com/kb/DL1572
    may turn up blank to start with, so it may be necessary to reload the page.

  • The Connection Server does not start after an upgrade to BO4.1 SP3

    Hello guys,
    The Connection Server does not start after an upgrade to BO4.1 SP3
    We are in process to upgrade our Business Objects environments to BO4.1 SP3
    The first 2 environments , the upgrade went fine. But the third environment de connection server won’t start.
    When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
    Our OS is AIX
    Uncaught Exception in SilentScope: [CS] Ser
    verInitialization::InitManager::Initialize: 0.007^^
    The CS initialization failed within the CS server. Aborting
    trc file: "connectionserver_BIO.ConnectionServer_ncs.trc", trc level: 1, release: "720"
    Gerd

    Hi Amine
    The File seems ok
    File from the failing connection server
    -rw-rw---- 1 bioadm bosys 43993 Apr 11 11:29 boconfig.cfg
    File from our test system
    -rw-rw---- 1 bitadm bosys 43892 Apr 14 10:56 boconfig.cfg
    I created a new connectieserver(by the copy function), but the new server won't start.
    Regards
    Gerd
    Log
    |89d4a6e0-2a89-7a05-3020-a51d517ab872|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] Unhandled exception raised during CS initialization.
    init_srv.cpp:95:-: TraceLog message 3
    |4dcf04b1-1e1d-df13-48ad-a67f06e29864|2014 04 14 11:54:30:113|+0200|Error| |<<|E|X|connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||Uncaught Exception in SilentScope: [CS] ServerInitialization::InitManager::Initialize: 0.003
    |77ad78f4-37f7-3013-3b50-85cce9fbe7b8|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] The CS initialization failed within the CS server. Aborting.

  • I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that

    I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that I have to upgrade using the account that I used to buy iPhoto. What do I have to do to upgrade iPhoto?

    Dear Katty,
    Thank you very much for your answer! I have 2 Apple ID, and I have tried both of them and the problem continues. I founf several peolpe with the same problem in apple communities foruns and that really seems that there is some problem. I addded the links for 2 of those discussions.
    https://discussions.apple.com/thread/3374419?start=0&tstart=0
    https://discussions.apple.com/message/16628399#16628399
    Do you have an idea of how can I solve this problem?
    Thank you very much again.
    Best regards,
    Alfonso

  • Flash Plug in is crashing after recent upgrade. I tried uninstalling, and reinstalling, still crashing. Firefox and Plug-in are current. What else can I do?

    Flash Plug in is crashing after recent upgrade. I tried uninstalling, and reinstalling, still crashing. Firefox and Plug-in are current. What else can I do?

    What I suggest you do here is to use Adobe's uninstaller tool to uninstall Flash first of all: http://kb2.adobe.com/cps/141/tn_14157.html
    Then reboot, go to http://get.adobe.com/flashplayer/ and reinstall it.
    I notice too that you have an outdated version of Shockwave For Director. You can update that via http://get.adobe.com/shockwave/

  • I loose my home network connectivity after my iMac is awaken. This began after I upgraded to Lion. Is there a fix to this problem?

    I loose my home network connectivity after my iMac is awaken. This began after I upgraded to Lion. Is there a fix to this problem?

    see if this article helps: http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

  • I just Synced My iPhone 6 which had close to 2000 photos to a new computer (windows PC) and synced with iTunes.Now all my previous photos have been deleted which were there on my phone. Please suggest a way to recover those Photos . Thanks

    I just Synced My iPhone 6 which had close to 2000 photos to a new computer (windows PC) and synced with iTunes.Now all my previous photos have been deleted which were there on my phone. Please suggest a way to recover those Photos . Thanks
    P.S -I have not taken any backup of those photos. So please suggest any software or any other method.

    If those photos were part of the camera roll, they were part of the backup as well and you can restore from the latest backup you made on the old computer. After that transfer the photos to the new PC, follow this article: iOS: Importing personal photos and videos from iOS devices to your computer
    Then sync again to the new one, which will erase the phone again.
    You can also try to copy the backup folder from the old computer to the new one and see if the old backups get recognized, check this article to find the location on your PC:
    Create and delete iPhone, iPad, and iPod touch backups in iTunes
    If the photos were not taken with the phone, your data is gone, photos you sync from iTunes to the phone are not included in the backup.

  • I bought Lightroom 3 or 4, can't remember which, as an online download. I then upgraded to 5 with a CD. I registered the upgrade on my Adobe account and that's where the serial number is. I just bought a new iMac and am trying to install Lightroom. The sy

    I bought Lightroom 3 or 4, can't remember which, as an online download. I then upgraded to 5 with a CD. I registered the upgrade on my Adobe account and that's where the serial number is. I just bought a new iMac and am trying to install Lightroom. The system is asking for my original serial number which I don't have. The point is. If I have the upgrade registered with my Adobe account, shouldn't that be proof that an earlier version was on my computer??? I'm really stuck. Need some advice! Thanks
    Linda

    Hi John,
    Thanks for your response, but if you read my first mail, it's the original serial number that I don't have. I bought the original LR as download and have misplaced the serial number. Is there any way to find it???
    Linda

  • I have upgraded to OS X mavericks and there is now a problem with my email. I have discovered several emails no longer contain the original message instead another completely different message is appearing but under the name of original sender. Any ideas?

    I have upgraded to OS X mavericks and there is now a problem with my email. I have discovered several emails no longer contain the original message instead another completely different message is appearing but under the name of original sender. Any ideas?

    With the account mailbox selected, Mailbox menu, Rebuild.

  • TS3276 I just upgraded to 10.8.2 and Mail is having a problem. It won't remember my password for getting mail; but it does remember the password for sending mail, i.e., smtp. Does anyone know of a fix?

    I just upgraded to 10.8.2 and Mail is having a problem. It won't remember my password for getting mail; but it does remember the password for sending mail, i.e., smtp. Does anyone know of a fix?

    The solution surprised even me, and we've been using Macs since 1984 (still have an original 128K).
    I contacted Apple support, and because we had just upgraded yesterday, clicked on the "exception" button as opposed to paying the $19.99 one-time support fee. An Apple tech called and the problem was solved in two minutes.
    Somehow during the installation of OS 10.8.2 (over 10.6.x) the key chain data for my email ISP login password got corrupted. The solution was to delete both the POP mail and SMTP entries in my keychain.
    Back to Mail, it asked for the POP password, I entered it and bingo, mail got busy downloading. Interestingly, the password was also entered into the SMTP panel.
    So, that's it. Thanks for you response, Mr. Hoffman, and regards.

Maybe you are looking for