Last PO Price not picking up

Hi experts,
In one of my clients, the Price from the Last P.O for all combination of Vendor/Material/Plant is not picking up. This has happened 15 days ago. I couldnt find any changes.
I checked the InfoRecord, the info update tick in PO, the User profile for EVO, the Last PO price automatically Copy tick settings. But all are showing fine. Here PBXX is only used.
Hope to get an answer soon, as I have been searchinh for the last 4 days and am unable to get the answer for this.
Thanks,
MouleswaraRao.

Hi,
You are facing this problem due to the Pricing date control field In the vendor master record or the Pricing date category field In the purchasing info record.
Check out the same & make settings accordingly. Remember after you save the new settings you will have to create a new PO to check whether the problem is solved.
Go through the link below,
http://help.sap.com/erp2005_ehp_04/helpdata/EN/75/ee130655c811d189900000e8322d00/frameset.htm
If the problem is still not solved revert back to me.
Regards,
Prithviraj

Similar Messages

  • Net price not picking from info record

    I am creating a new PO, but net price is not picking from info record. Info record is getting copied in the line item for PO, but net price is not copied. Due to that I am unable to create PO. If I manually enter price PO can be created. Could someone tell me what might be the reason Price is not automatically taken from Info Record. Please guide me what all I need to check.
    The same data is working in one cleint, and in another client this data is facing problem.
    Thanks
    Vineeth

    Hi
    1) If there is condition record exit in system,then while creating po system will take condition record
    2) If In inforecord last po number is exist for material and vendor ,then system will take this into consideration
    3) if your creating po first time for material and vendor ,and we have maintain purchasing inforecord for purchasing organization and for plant,then system will take it into consideration
    40 If none is available we have to put condition manually in po
    Regards
    Kailas ugale

  • Price not picked to  Existing Purchase Order

    Hi,
    I have an Issue while converting Purchase requistion to PO Prices are not yet picked.
    1. Cretaed PO with existing Requisition. Prices are picked. For example PO is created on 05/31/2011.
    2. After I have created New Material with Info record Validity periods from 06/01/2011 for same vendor.
    3. Amend this Item to Purchase requisition.
    4. Convert to New PO -Prices are picked, But converting to Existing PO( PO created before Material creation 05/31/2011) Prices not yet picked.
    I have analyze the pricing procedure also, no condition record found on Doc date.
    Kindly explain why price not yet picked to the existing po.
    Regards,
    Sridhar.

    Typically, the prices are taken from the info record rather than the PR. If there is no price is maintained then the system takes from the last PO stored in the info record.
    Can you check what is the price date control specified in your info record (this is under purchasing org data 1 view under conditions)? This setting also drives how prices are derived.

  • PR Price not picked in PO

    Hi All,
    Good Morning.
    I have created one PR through Global Outline Agreement. The Price was picked up in PR thorugh GOA. But when I am creating PO the price is not picked up thorough PR. I checked Pricing Procedure and other settings. Do you have any idea what more settings I need to check.
    Best Regards
    Lovkesh

    If you want system to pickup the PR price in PO then you have to USE the Transaction OMET and select the adopt PO price and set the user parameter in user master record for whom you want to force to use
    or you have to create the sourcelist and assign the source is Outline agreement then only system will pickup the price from Out.agr.
    Or Create PO Ref with Outlint Agree.

  • PO having Item Category u0091Pu0092 or u0091Qu0092  price not picking from Condition Record

    Hi Guru,
    Purchase order having Item Category ‘P’ or ‘Q’ Price should pick from the condition type.
    Where my condition type against on material and WBS based on this Price will be fixed. 
    Now I create the PO for same, which the price was not picking from the Condition Record.
    Please help on this.
    Thanks
    Muthukumar

    The condition record was created and is being picked up in the calculation.  Also, I am now testing with a material that does not have a PIR created, so the PIR does have an impact on my current results.
    My current test has results as follows:  condition P101 = Std. Cost (as expect) $100.00; ZUPP = calculated at 5% (as expected) $105.00.  However, the Net Price in the PO line item is showing only $100.00, not the $105.00.
    A look at table EKPO shows the following: Net Price  (NETPR) $100.00; Net Value (NETWR) $100.00 ; Gross Value (BRTWR) $105.00.
    Can you tell me what I am missing with this setup?

  • Price not picking from PR

    Hi Seniors,
       I have maintained a PR with valuation price of 12000 eur. And when i create quantity contract with reference to that PR..it is not picking the valuation price from that PR. it is asking manually ? why it so ??
    Regards,
    Jana

    To copy PR price to PO ,follow the answered link
    Re: Price from PR to PO
    Adopt PR Price in PO

  • Price not picking while creating purchase order

    hi all,
    i have created a pricing procedure and assigned to the vedor, but while creating purchase order the material price is not picking up.if i use the standard one the price is picking up. can anyone explaing any setting iam missing.
    regards
    thyagarajan

    Hi
    In your pricing procedure
    For the condition type Automatic Gross price PB00, you have assigned am Access sequence.
    <b>Access sequence</b>: An access sequence is a search strategy by means of which the system searches for valid records in various condition tables. It consists of one or more accesses. The sequence of accesses controls the priority of the individual condition records among each other. Through the accesses, the system is told where to look first and where to look next for a valid condition record in each case.
    Once the pricing procedure triggers, System looks for the valid condition recorrd for the condition type PB00 as per the priority listed in Access sequence.
    Example: If purchase info record is the first priority and you maintained the Info record then system picks the price from Info record into PO.
    If no valid condition record found then it will trigger PBXX Manual Gross price condition in PO and ask to enter the price manually.This is called condition technique.
    So check whether you maintained the Condition record for PB00 or not?
    Regards
    Ramakrishna

  • Scale price not picked

    Hi Experts,
    I have issue when the condition has scale price it is not picling as per the quantity in the scales mainatained, I have checked the condition records valididty , which is fine, Please help me to know what would have been reasons for not picking the scale priece.
    Thanks

    hi,
    this is to inform you that,
    goto the sales order in VA02 select the item & GOTO - item conditions - display condition record - and Press F2.
    please check the scales have you maintained or not.
    if maintained check Unit Of Measure or Sales unit = conversion factor is there or not for Material Master Record
    whether the condition type is carried with automatic pricing or not.
    please check it and update to the forum.
    regards,
    balajia
    Edited by: balaji timmampalli achari on Nov 25, 2010 5:46 AM

  • Last Purchased Price not adding tax

    Hi guys, I have a new question today.
    I have my tax definition set up as Included in Price.
    So now let's say I purchase one Item A for $100
    From this $100, $10 are tax.
    When I see the last prices report it's showing correctly, $100
    But when I see the Last Purchased Price, in item master data, it's showing $90 ($100-$10). Since my tax is included in price, shouldn't it show me the full price??
    Thanks a lot!

    Danilo,
    The last purchased price is set by the unit price in the purchasing document, it does not take into account the tax amount.
    If you wanted this to be reflected in the Last Purchased Price you would need to set the tax amount for the item, and possibly the entire document to zero.
    Hope this helps,
    Lucas

  • Last Evaluated Price not updating

    Hi,
    I have a very wierd issue which I have never seen before as explained below. The system is 8.82 PL 6.
    Problem: The Last Evaluated price (LEP) is not updating on Item Master Data (IMD) under certain conditions.
    Explanations:
    1. All items have a valuation method of FIFO
    2. For a particular item let us call it 101381, if I open the IMD, select LEP, the price shows up as 516.80
    3. There are definitely Goods Receipts for this item with a lower price than 516.80
    4. I run the 'Inventory Valuation Simulation Report' with blank From-Item and To-Item, i.e. for all items, calc. method as moving average, Posting date blank and WHs checked off
    5. There are thousands of items in our IMD but obviously, the report that comes up just shows the first item on our IMD 100000, and if we want to see 101381, we need to click the green right arrow 1381 times. So instead of scrolling over, I simply click OK to close this report, assuming that the LEP for 101381 has been updated
    6. I once again open the IMD for 101381 and choose LEP. Strangely, the LEP price still shows as 516.80!
    7. Then I run the report for a block of Items say from 101380 to 101390, keeping all other criteria the same as before
    8. This time, I click the green arrow 10 times to scroll from 101380 to 101390 and then clck OK to close the report.
    9. Now if I open the Item 101381 and check the LEP, it has been updated to 510.78!!!
    10. The same thing happens, i.e. the LEP gets updated if I simply select just 1 item i.e. FROM 101381 TO 101381.
    Why does the LEP not get updated automatically when all Items are taken at once? There is no way the users are going to click the green right arrow 20000 times just to refresh the LEP on all 20000 items. I am not sure if this is a bug in this PL?
    I have tested this extensively and any positive suggestions will be greatly appreciated.
    Thanks,
    Ajay Audich

    Hi,
    Please refer SAP note:
    1952446 - Inventory audit report updates item's last evaluated
    price
    Thanks & Regards,
    Nagarajan

  • MM Pricing Schema - Contract item price not picked

    Hi All,
    For a certain Material and Vendor, when there is a Info Rec Condition and Contract Condition maintained, I thought having the Key table for Contract (016) above the Key table for Info Rec (017) in the Access Sequence for PB00 would take the Contract Price over the Info Record. Also the "Exclusive" ind is set fo both key tables in the access sequence.
    When I goto the pricing analysis, I see "Access not made (initialized field)" message with a yellow exclamation appear for the Contract Item key table row in the Access Sequnce.
    Why is this? Any idea?

    Hi,
    It seems that valid Condition Record for the key combination specified for the Contract has not been picked by the system.
    In Access Sequence, you will define which fields the SAP system should check in searching for a Valid Condition Record.
    Please check the fields mentioned in the access for Contract and try to maintain the condition record with those field values for the Contracts. Then, you will get the price from the Contract prior to Info record.
    Regards,
    Narayana.

  • Price not picking from VK12

    Hi,
    I maintained a price in vk12, and the condition record for today states a price of 17,
    And i'm creating a billing doc for today. In the codition type, pricing date is set as 'C' to pick the billing date for pricing.
    Sales order price how ever picks the price when the SO was created which is 16.
    Ideally at billing it should pick the price as 17 since its maintained in cond record but it picks 16.
    Can you please explain how i can correct this to pick the vk12 price.
    Thanks
    Keshini

    Hello Keshini,
    Ideally the pricing flows from the sales order (VA01) to the invoice (VF01).
    Explanation:
    Say you created a sales order on 10/07/2008 & at that time the price was Rs.16/-.
    Today on 22/07/2008, the price has changed to Rs.20/-. Now ideally the pricing will be copied from the sales order & so the price will be Rs.16/- by default.
    If you want the bill to be created with Rs.20/- do one thing o go to item level pricing condition - click on "update" button - select the option "B"-carry out new pricing. The system will determine the new price Rs.20/-.
    You can also try out maintaining the copy control settings in transaction code VTFL (copy control between delivery document & billing document) for pricing as "B". But watch out for the manual conditions which may have been selected in the sales order. You may again have to enter them in the invoice.
    Reward points if solution helps.
    Regards,
    Allabaqsh G. Patil.

  • Price not picking from vendor agreement to project

    Hi Guruu2019s,
    I have a problem in where am not receiving the price from vendor agreement to the projects. Let me know what are all the settings to be done for this to get rectified.
    Please revert back for any further inputs.
    Looking forward for your valuable inputs.
    Regards,
    Kumar.S

    hi,
    if my above requirement is not clear then please refer my req as mentioned below,
    Whether the system takes the agreement (Which i have manintaned in ME33)price in the network pur.req. automatically or not?If yes then please tell me what settings i need to maintain.
    Expecting the step by step process to fix this issue.
    Regards,
    Kumar.S

  • Stock Transfer Price not pick in Billing

    Dear all,
    I am doing stocktransfer for one plant other first i create using t-code me21n than outbound delivery vl01n & billing VF01.
    I had take 100 rupee price in PO but at the time of billing it will take zero value.
    please give me the solution .
    Thanks & Regards
    Amit Karalkar

    Dear Mr Karalkar,
    In case of stock transfers, it is more convenient to understand pricing as made up of two parts:-
    1.  pricing for inventory valuation and
    2.  pricing for billing (SD) function.
    For an analysis of the pricing in sales and distribution, kindly verify if the pricing procedure in the billing document header is consistent with what is expected i.e OVKK assignment.
    The assignment may be independently analysed in v/08 and its functioning in document pricing analysis.
    Trust the lead is helpful.
    Regards,
    K Gopidas.

  • Last Aggregation Method not getting applied for Time hierarchy(Y, Q & M)

    Hi,
    OBIEE: 11.1.1.6.2
    In my application there is a measure (closing balance) that we wish pick as LAST when ever we associate this measure to time hierarchy. In order to achieve this configuration we have set the Aggregation method as:
    Logical Column Window > Aggregation tab > Based on Dimensions (checked) > Under Logical Dimension
    Other: SUM(Measure)
    Time Hierarchy: LAST(Measure)
    Now what happens is that when we see this measure against the time hierarchy the the LAST value is not picked up, Example:
    Time-Hierarchy:
    2008
    2008-Q4
    Oct-2008
    Nov-2008
    Dec-2008
    What's happening is, instead of picking the Dec-2008 value, the 2008-Q4 value is displayed as Oct-2008 value. Which means that OBIEE is sorting the months under the Quarter node in alphabetical order (D, N & O) and then picking the LAST value as 'Oct-2008'.
    Kindly suggest what can be done to pick the right node value of Dec-2008.
    Thanks
    Prashant

    Hi,
    chek weather u have any data for DEC-2008 in fact table
    in which level u put the week,month, year hirarchy.chckthe session query weather it is doing any filter or order by
    mark helps
    thanks
    Edited by: Rupesh Shelar on Apr 7, 2013 10:03 PM

Maybe you are looking for