Latest SP in PI 7.0

Hi,
what is the latest SP in PI 7.0?what are the different SP released in PI 7.0 right from the begining?
thank you.

The latest version is PI 7.0 -> sp19(XI is renamed as PI(process integration)).
for more on release notes for 2004S for usage type PI-
http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/8c3842bb58f83ae10000000a1550b0/frameset.htm

Similar Messages

I tried to install latest OS update. Recd error installing. IT tried to load the upgrade in Safe Mode. Now system will not boot up. IT says I have to do a clean install which loses all data.

After receiving an error when I try to install the latest update of OS-X, I took my laptop to oour schools IT dept. They tried to run the update in safe mode and then they got an error saying the system could not find the hard drive. Now they want to run a clean install which loses 1000's of docs and pictures. I have Block I exams in med school next Monday and all of my notes and slides are on that hard drive.
The IT dept took the hard drive out and tried to back it up and they said they other computer could not connect or find my hard drive.
Major panic....
I have Norton antivirus and have never found any viruses on the system. I also have a program called ExamSoft which some other students here have noted they had similar crashes. Not sure if that is the issue...

Several take home messages here:
always back up before you update.
always back up anything you don't want to lose. Kind of like flossing. Only floss the teeth you don't want to lose.
Norton is very, very bad software, and you should get rid of it.
You don't need antivirus software on your mac. Antivirus software on macs causes more trouble than it is worth.
Your hard drive may be failing and thus may not be salvageable.
You could try booting into the recovery partition and seeing if you can repair your hard drive.
If that doesn't work, then there is a small chance that a third party utility (like Disk Warrior or TechTool) might be able to fix your drive (if it is not failing).
If that doesn't work, you may be able to send your drive and a lot of cash to a drive recovery service and see if they can get your files off it.
In the mean time, get notes and slides from a (smart) friend.

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because its a prestiage of Apple Company.
Pls inform me how can i resolve the problem of wifi.

You have to go to autherized iPhone agent.

I have the latest version of Pages installed, yet there are documents I try to open and the message "you need a newer version of Pages to open this document". Help?

When I try to open some of my documents, the message "you need a newer version of Pages" appears; yet, I have installed the latest/newest version. How do I clear this up? Thanks.

You have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.01 can not open Pages 5.2 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Once opened and saved in Pages 5.2 files can not be opened in Pages 5.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed over 95 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

IPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers?

iPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers? I downloaded old version of Numbers 2.0.1 from DVD but with both versions the 2.0.1 will not open. So both versions are present but only the new version functions. I tried to drag the new version to the trash but the old version still runs error message and will not open. I did not try to restart with the new version in the trash.

Maybe. See:
Reverting to previous version of Numbers

I am on windows 7 and I upgraded to 10.0.2 and now it will not open. I have removed firefox completely and uploaded it again and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version and once again nothing.

I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?

I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
[https://www.mozilla.org/en-US/firefox/new/ Firefox]
[http://kb.mozillazine.org/Installation_directory Installation Folder]
[http://kb.mozillazine.org/Profile_folder Profile Folder]
Please note that using system restore would usually damage the Firefox installation.

I installed the latest version of Firefox last night. It worked 3-4 times flawlessly. Now, it crashes at startup and gives me a box with crash detail report. How can I fix this?

I have a brand new HP dv8t laptop that is straight from the manufacturer 2 days ago.
Last night, I attempted to download and installed the latest version of Firefox. After installing, it worked great for an hour or so (3.4 different sessions).
Then, this morning when I came back to the computer, Firefox crashes at startup and gives me the option of finding a solution online or quitting the program.
How aggravating!
I have installed this same version on 2 other computers that I own, without any issue.
I have attempted to uninstall Firefox from the dv8 and reinstalling, to no avail.
I cannot find the crash report, but I do this see this message once the app crashes:
Problem signature:
Problem Event Name: APPCRASH
Application Name: firefox.exe
Application Version: 1.9.0.3399
Application Timestamp: 49f1091d
Fault Module Name: StackHash_5701
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: 4000001f
Exception Offset: 046b75ba
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 5701
Additional Information 2: 5701071bdc29491833a7ab96965d1870
Additional Information 3: c8d0
Additional Information 4: c8d0e80632ad4cc967a76f7e9c35ca44
Please help! I cant stand iE anymore and I'm so lost without Firefox!

You might try using the add-on 'NoSquint' which allows numerous zoom options specific to each page you visit & keeps your settings - https://addons.mozilla.org/en-US/firefox/addon/nosquint/
If you want to go back to 3.6x, you will find it here:
http://www.mozilla.com/en-US/firefox/all-older.html
In most cases you can simply "upgrade" (meaning downgrade) directly from the installation. It would be a good idea to save your passwords & bookmarks just to be on the safe side.

Office 2013 latest update broke new profile creation on all network computers

Hi,
Reporting a bug here!
Setup details:
We're using samba 3 as our backend and all workstation are Windows 7 Pro x64.
Office 2013 Home and Business Retail (en-us) Click 2 Run version
Context:
Deployed to the whole network of one of our client using the Office Deployement Tool.
We update their base update (no updates) to the latest update 15.0.4569.1508
Everything was working alright after initial Office 2013 installation with no updates. After updating the all the PCs to the latest version as of 31/03/2014, the user profile creation broke for newly created user.
Symptoms and causes:
Trying to log on as a new user on the machine would give the following error on Logon before automatically loging off because it cannot copy the following file to the new user profile:
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_00.sqm
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_02.sqm
The Bici folder has Read and Execute permissions for everyone but the _XX.sqm files inside only have permissions (Full Control) for SYSTEM and Administrators and LOCAL SERVICE with the all permissions EXCEPT:
- FULL CONTROL
- TRAVERSE FOLDERS/EXECUTE FILES
- CHANGE PERMISSIONS
- TAKE OWNERSHIP
Solution:
I gave "everyone" Read and Execute permission on those files and the new user could log in and his profile got created alright.
The files with broken permissions time stamp shows they've been modified during the Office 2013 update and Bici seems to be a OneDrive related service. This bug should get fixed ASAP.
Event log error:
Windows cannot copy file \\?\D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm to location \\?\D:\Users\TEMP\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-User Profiles General" Guid="{DB00DFB6-29F9-4A9C-9B3B-1F4F9E7D9770}" />
<EventID>1509</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-04T07:15:51.922563800Z" />
<EventRecordID>9615</EventRecordID>
<Correlation />
<Execution ProcessID="940" ThreadID="1764" />
<Channel>Application</Channel>
<Computer>F00241D1DAAAD</Computer>
<Security UserID="S-1-5-21-1582357797-4105456612-768596941-1206" />
</System>
- <EventData Name="EVENT_COPYERROR">
<Data Name="Source">\\?\D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm</Data>
<Data Name="Target">\\?\D:\Users\TEMP\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm</Data>
<Data Name="Error">Access is denied.</Data>
</EventData>
</Event>

Hi dude,
I appreciate that your sharing your experience and solution here. And, I would report it through our internal channel. Thanks again.
Tony Chen
TechNet Community Support

HT1444 How can I upgrade my system 10.4 into a newer one or the latest I could get for my machine?

I currently have Mac OS X V. 10.4.11 and there are some things I'm unable to use on my computer, Adobe flash player being one of them, so I figured why not upgrading my software into the latest I could get? However I have no clue how can this be done, or if it can be done?
I'll appreciate any advice. Thank you.

OS numbers and names
OS X 10.4.x - Tiger
OS X 10.5.x - Leopard
OS X 10.6.x - Snow Leopard
OS X 10.7.x - Lion
OS X 10.8.x - Mountain Lion
More about Macs
The Apple History site has specifications for every Mac ever produced: http://www.apple-history.com/
Upgrade to Leopard
Those wishing to upgrade to Leopard should be aware that install disks can be expensive unless you contact Apple. Details: http://lowendmac.com/deals/best-os-x-leopard-prices.html Standard Leopard installers impose several hardware limitations including speed and RAM size but all these restrictions can be overcome. Google for details. Leopard works well at 500 MHz with 1 GB of RAM and many happy users have less than this.
Upgrade beyond Leopard
OSs beyond OS X 10.5.8 require an Intel processor. If in doubt check this: Click the apple at the top left of your screen and select 'About this Mac'. This will give you your OS number. Then click 'More Info' to see which processor you have. If it says PowerPC you cannot upgrade to Snow Leopard and above. If you have an Intel Mac it is well worth upgrading to Snow Leopard now and then considering other options after that. You can buy Snow Leopard here: http://store.apple.com/us/product/MC573Z/A
Upgrade beyond Snow Leopard
Information about upgrading Snow Leopard to Lion or Mountain Lion: http://store.apple.com/us/product/MD256Z/A
Important
Check that your Mac complies with any requirements. If you are not in the US you should use the Change Country link at the bottom of Apple pages.

What is new in the latest Apple TV version?

Is the March 2012 version of Apple TV the same as the latest version? I'm thinking about purchasing a refurbished model (http://store.apple.com/us/browse/home/specialdeals/ipod/apple_tv) and wonder if there is any downside to that version vs. what is sold now new.

Click here for information.
(89646)

What is new in IWeb latest version ?

Can someone tell me what is new in IWeb latest version ?
are there new features or is it just a bug-cleaning ?
Thanks
MacBookPro 1,83 GHz Mac OS X (10.4.6)

MacBookPro,
Hi there. If you are talking about 1.1.1 then I think that just fixed the publishing error problems.
If you mean the version before....maybe someone else can jump in and answer that one.
jabberwock
iBook G4 Mac OS X (10.4.6) http://web.mac.com/abenningfield/iWeb/Benningfield

Is it possible to uninstall the latest kitkat update ("improvement")? If not, how can I fix the problems it has created?

The latest kit kat "improvements" have made using my phone much more frustrating. How can one roll back this operating system update to the previous version? If it is not possible to roll it back, how do I fix the following issues?
1) The battery timing has been greatly diminished.
2) Gmail isn't syncing properly. At least 7 times since the update, upon opening gmail, I see lists of messages that are sometimes over a year old, and not my current ones.
3) The sound slider bar on the open screen has disappeared. It now takes 4 steps in order to get into settings, and temporarily turn off the sound. That is ridiculous when entering a meeting. Not to mention that you have to repeat those steps upon the meeting's end.
4) Searching for a particular contact in people has become more complicated--much easier to select "m" when looking for Mary's info than to have to scroll through the very JITTERY and way too touch sensitive sidebar all the way to the "M's" to even begin to search through the M's. This is way too unwieldy.
5) Emoticon symbol has replaced the symbol to move to the next line in text messaging keyboard. I am not interested in childlike emoticons. I am interested in writing a coherent professional message with appropriate spacing.
Any suggestions will be greatly appreciated.

You cannot uninstall Kit Kat from your phone. BTW what kind of phone do you have??

Note: Due to heavy load, the latest workflow operation has been queued. It will attempt to resume at a later time

Dear all,
sorry for opening another thread on this.
I think I have a performance issue with workflows attached to document sets in SharePoint. And I say “I think” because people keep telling me that this is the way it just is.
The user creates a new document set, which triggers a workflow in which the user has to confirm/review/approve a series of tasks. The time it takes from clicking the OK button on those task form to the workflow status moving to the next step is about 4 seconds.
And visiting that status page within those 4 seconds brings up the infamous “Note: Due to heavy load, the latest workflow operation has been queued. It will attempt to resume at a later time.” message.
Hitting Refresh in the browser after those 4 seconds will make the new workflow status appear and the red text go away.
Is that normal? Is that the performance that everyone else is seeing as well?
I struggle to see why simply moving a workflow from one task to another should take that on a machine that isn’t doing anything else at the time.
(1)
I have a standalone (non-clustered) SharePoint box, 4 CPUs, 8 GB of memory, more than half of that available, acting as application server and wfe; only the database is on different box.
(2)
The CPU only goes up to 18 or 19%, so CPU does not seem to be the bottleneck. Half the RAM is also still free.
(3)
The workflow is designed with Nintex, and has about 9 flexi and review tasks – the last 2 of them in a loop iterating over typically 3 or 4 items.
(4)
Looking at the logs it looks like the processing in Nintex only takes about 1 second – I don’t know where the other 3 seconds are going.
(5)
There is nothing obvious in the logs.
(6)
We’ve looked at all the “theoretical” improvements around throttling and batch sizes etc. – none of them appeared make any difference. And the workflow is so small that it looks like my tasks gets executed straight away. The problem appears
to be that the execution takes too long(?) and therefore has not finished by the time the page get redrawn.
(7)
I am running perfmon and I can e.g. see one(!) workflow being loaded into memory – as expected as I am the only user.
(8)
I am seeing a total of 3(?) SQL queries being executed(?). I get the Bytes Sent/sec spiking at 25K, and Bytes received at 18K. But is this good or bad or a bottleneck?
Where do I take it from here?
I have been told that “[…] most customers have no issue with this as they are used to the way SP operates and it can be slow at times.” Is it really that bad?
If it is worth watching more performance counters then I’d need to know what to compare them to.
Is there something else I am missing?
Thanks
Martin

Hi,
Before considering an additional hardware try to change following configurations for workflow:
Increase Throttle Size
Increase Batch Size
Time Out
Workflow Timer Interval
AutoCleanUpDays
Increase Throttle Size
The Workflow throttle setting controls how many Workflows can be processing at any one time on the entire server farm. By increasing the throttle it will allow the number of Workflows execution or can be initiated at a time.
Use below PowerShell command to get the current Throttle Size:
Get-SPFarmConfig | Select WorkflowPostponeThreshold
Use below PowerShell command to set new Throttle Size:
Set-SPFarmConfig -WorkflowPostponeThreshold 100
Increase Batch Size
This is the size that determines number of events processed for a single Workflow instance. Default value is 100, but it can be range from 1 to any number.
Use below PowerShell command to get the current Batch Size:
Get-SPFarmConfig | Select WorkflowBatchSize
Use below PowerShell command to set new Batch Size:
Set-SPFarmConfig -WorkflowBatchSize 200
Time Out
This decides the time out of the Workflow event. The default value is 5 and can be any integer. The time is in minute.
Use below STSADM command to get the current Time Out value:
stsadm -o getproperty -pn workflow-eventdelivery-timeout
Use below STSADM command to get the current Time Out value:
stsadm -o setproperty -pn workflow-eventdelivery-timeout -pv “15″
Workflow Timer Interval
This setting is applicable at Web Application level and not the farm level. The workflow timer interval specifies how often the workflow SPTimer job fires to process pending workflow tasks. This interval also represents the granularity of delay timers within
your workflow. If a timer is set to delay for one minute, but the interval timer fires only every five minutes, the workflow delays for five minutes, not one minute.
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o getproperty -pn job-workflow -url <Web Application Url>
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o setproperty -pn job-workflow -pv “Every 10 minutes between 0 and 30″ -url <Web Application Url>
Here is the url for reference :
http://praveenkasireddy.wordpress.com/2013/06/14/workflow-due-to-heavy-load-the-latest-workflow-operation-has-been-queued-it-will-attempt-to-resume-at-a-later-time/

Due to heavy load, the latest workflow operation has been queued. It will attempt to resume at a later time.

I have SharePoint 2010 Enterprise running SP1. Configuration is one SharePoint server in the farm and a SQL 2008 R2 database for the backend. Our user environment is 80 users with very little load on the SharePoint server. I have the workflow timer
set to 1 minute.
I have a SPD workflow that starts manually on a form library. Whenever I publish a new version of the workflow, the next time I start the workflow it takes the full minute to finish. If I click on the workflow status before it finishes, I see the message
"Due to heavy load, the latest workflow operation has been queued. It will
attempt to resume at a later time.". After the minute completes the workflow finishes.
Here's the weird thing, the next time I start the workflow, it runs in a couple of seconds - almost instantly. I've tried up to 15 times after the inital publishing and everything seems to work fine on initiation.
Well, that would be fine for me, however, I intermintantly get this heavy load message during task processes that are running inside the workflow. It's probably less than 5% of the time. It's really frustrating though so I appreciate some help. I'm look
online and haven't found anything that describes my situation.
Thank you in advance!

Hi,
Before considering an additional hardware try to change following configurations for workflow:
Increase Throttle Size
Increase Batch Size
Time Out
Workflow Timer Interval
AutoCleanUpDays
Increase Throttle Size
The Workflow throttle setting controls how many Workflows can be processing at any one time on the entire server farm. By increasing the throttle it will allow the number of Workflows execution or can be initiated at a time.
Use below PowerShell command to get the current Throttle Size:
Get-SPFarmConfig |
Select WorkflowPostponeThreshold
Use below PowerShell command to set new Throttle Size:
Set-SPFarmConfig -WorkflowPostponeThreshold
100
Increase Batch Size
This is the size that determines number of events processed for a single Workflow instance. Default value is 100, but it can be range from 1 to any number.
Use below PowerShell command to get the current Batch Size:
Get-SPFarmConfig |
Select WorkflowBatchSize
Use below PowerShell command to set new Batch Size:
Set-SPFarmConfig -WorkflowBatchSize
200
Time Out
This decides the time out of the Workflow event. The default value is 5 and can be any integer. The time is in minute.
Use below STSADM command to get the current Time Out value:
stsadm -o getproperty -pn workflow-eventdelivery-timeout
Use below STSADM command to get the current Time Out value:
stsadm -o setproperty -pn workflow-eventdelivery-timeout -pv “15″
Workflow Timer Interval
This setting is applicable at Web Application level and not the farm level. The workflow timer interval specifies how often the workflow SPTimer job fires to process pending workflow tasks. This interval also represents the granularity of delay timers within
your workflow. If a timer is set to delay for one minute, but the interval timer fires only every five minutes, the workflow delays for five minutes, not one minute.
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o getproperty -pn job-workflow -url <Web Application Url>
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o setproperty -pn job-workflow -pv “Every 10 minutes between 0 and 30″ -url <Web Application Url>
Here is the url for reference :
http://praveenkasireddy.wordpress.com/2013/06/14/workflow-due-to-heavy-load-the-latest-workflow-operation-has-been-queued-it-will-attempt-to-resume-at-a-later-time/

I think there is a very annoying bug after the latest update of firefox, can I talk to someone, or chat with someone so I can get rid of it

Since the latest auto update of my firefox browser I am experiencing strange issues. Every evening when I stop working, I close my browser (closing all the tabs that I am working on and in the morning, I restore the session) . For many years everything worked just fine ... untill after the last auto update of the firefox browser .. all of a sudden a got 302 errors ( a blank page with the description 302 and I believe "page moved here" or something to that extend ... i try to click the link and get nowhere.
I first noticed it on a few wordpress pages (backend ) that I was working on and which were restored from the previous day ...
thinking it was a server error, since we have several vps and dedicated servers .. i contacted the company who hosts our servers ..
they looked into it and apparently .. there were no issues on the server side and neither on that particular computer ... but our server hosts told us .. that it is probably browser related and seemed to have something to with a bug with the cache of the browser
we didn't know what to do .. it was very annoying .. but at that point it only happened once on a hew pages .. so we decided to see what happened the next time
Next time we did not restore a session with wordpress pages .. but with the google search engine open and on a few other tabs logged into social media .... and as was saidn by our server hosts it was indeed not related to work that we did on pages on our servers ... since that time even the google search engine homepage ... showed us ... moved here
Can you pease look into it and fix this .. we are doing the same thing as many years on the same computer also a few years .. so it is not anything we do wrong either .. it is most definitely browser related
so can you please fix it asap .. since when we work on wordpress .. that is not the only thing that goes wrong .. we also have difficulty uploading updates ... when updating sometimes after the update of any particular change on a wordpress page is done ... we are also redirected to a blank page .. so the updated page does not want to load ... in that case we have use our back button ...
which sends us back to the right page ... but with the old data on it ... then we have to refresh that page .. and only then we see the page updated ... so it seems that there is an issue in both direction with the caching of the browser after the last update
Kind regards,
Robert

uninstalled firefox ....deleted all files still remaining under mozilla firefox directory in program files ... to avoid having to reprogram all my settings, reisntall all addons as well .. I did not remove anything from mozilla firefox that is stored in either appdata or under the windows users directory (if any)
... the as suggested reinstalled the latest version of the firefox browser using the link you provided in the email ..; tested and several issues still remain present and unresolved ....
so please this is urgent or I will have to jump browsers and start using chrome .. because we work 14 hours a day 6 (sometimes 7) days a week, to get ready for the launch of our newest venture and we cannot lose that much days on browser related issues ... so please instead of putting me through week long step process .. of do this .. do that .. can you please actually look into the issue from your end .. I use firefox for so many, many years thta I deserve this kind of support .. thnx Robert

Iphone no longer recognized by itunes or Win 7 since download latest version

Since downloading latest version of itunes, my iphone is not recognized by itunes or by my PC, running Windows 7 all fixes applied. HELP!!!!!!!!!!!

http://support.apple.com/kb/TS1538

Latest SP in PI 7.0

Similar Messages

Maybe you are looking for