Latest Value in Report

Hi,
I am creating a report with Client have some numbers for year and month basis. I am showing this in a Cross tab. User want to see the latest value also in a seperate Column as latest and it should be the last month shown in cross tab.
Attached is something I am looking for .
I am using BO 3.1
I am not able to find any way how to do that. If someone can help me.
Thanks.

you can use Last function in a footer column.
syntax: =Last([Measure Object])

Similar Messages

Release Value Contract Report

Hi,
As we can get individual customer released value contract amount through T Code VA43 and report Via T code Z_XX_SD_059 for mass customers which is usually not giving the correct amount of released from value contract. The report which is extracted via T code Z_XX_SD_059 normally not reconciled with the end result of T Code VA43.So, Is there any other T code for getting correct release value contract report for multiple customers? Please share if anyone knows.
Regards| Adnan Mahmood

Hi,
tcode Z is an in house development. Check with an abaper why there are differences with respect to VA43.
Regards,
JM

Stock value and report

Hi,
how determing <b>stock value with reports</b>?
Best regards

Hi,
There are quite a few standard reports which will give you the stock value report, you can try
MC.1 to MC.9 (gives you various stock value analysis reports), MMBE, MB5W etc.
Alternatively you can extract this data from MARD table.
If you are looking for a specific report, please let us know the same & we can be more precise in the output.
Hope i was able help you on this issue.
Regards,
Vivek

Retruning parameter/value from report to form - (Urgent)

Hi ,
I am calling a report (2.5) from a form using RUN_PRODUCT. I would like to know if there is any way to do the following.
(a) Return a value from reports to calling form. For ex. I would like to know the last Item name (assuming the reports prints all items in inventory) printed. I am sending a from and to numbers of item id's (range) and I need to know the last item printed.
(b). Check the success of report. For example, while printing the 5 items (the range that I passed) if there is any error in printing , this should be tracked either in the form or report. If this is not possible using run_product , If I need to use srw package, how to use it. Can I call the report as usual with run_product and in the after parameter trigger can, I call the report again and track error.
Any help will be appreciated.
Thanks

Please repost your question in the reports forum

Error when executing a scenario based on Variable type Latest Value

Hi,
I have created two ODI varaible -
1) filename of type as "Historize"
2) id of type as "Historize"
I have 2 Models -
1) One is based on FIle Technology with resource name as #CUSTOMER.filename (dynamic filename) (TARGET)
2) second is based on Oracle technology which contains two relational tables (SOURCE)
I have an interface in which one-to-one mapping is done from source to target.
At the junction of two source tables..i have put a query as "CUSTOMER_PAYMENT.CUSTID=CUSTOMER_DETAILS.CUSTID and CUSTOMER_DETAILS.CUSTID !=(#id)"
Package:
drag and drop two ODI variables , interface
Connect two ODI variable to interface and define the variable type as "Declare Variable" in the package.
Define filename as the firststep.
filename(firststep)-----------------------------
INTERFACE
id---------------------------------------------------
It is working fine with java callout and command prompt. It is not working when i invoke it on desginer.
It gives me error:
java.sql.SQLException: ORA-00936: missing expression
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_describe(T4CPreparedStatement.java:503)
     at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:965)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_maybe_describe(T4CPreparedStatement.java:535)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1051)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3026)
     at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Similary when i define the variable type as "Latest Value/Niot Persistent"...giving me same error as above...but working finw with java and command prompt.
Thanks
Edited by: user12420305 on Aug 31, 2010 10:42 PM

Hi,
My Package contains:
First step : customerid and custFileName
Second step : interface
Type of both the variables in package is "Declare"
customerid : type Alphanumeric - Historize
custFileName : type Alphanumeric - Historize
generate a scenario of the package and execute it.
custFileName : abc.txt customerid : 2
The file is created but it is giving me error for customer id.
Operator Description:
select
     CUSTOMER_DETAILS.CUSTID CUSTOMER_ID,
     CUSTOMER_DETAILS.LAST_NAME || CUSTOMER_DETAILS.FIRST_NAME CUSTOMERNAME,
     CUSTOMER_DETAILS.ADDRESS ADDRESS,
     CUSTOMER_PAYMENT.PAYMENTID PAYMENT_ID,
     CUSTOMER_PAYMENT.AMOUNT AMOUNT
from     ODITEST1.CUSTOMER_DETAILS CUSTOMER_DETAILS, ODITEST1.CUSTOMER_PAYMENT CUSTOMER_PAYMENT
where      (1=1)
And (CUSTOMER_PAYMENT.CUSTID=CUSTOMER_DETAILS.CUSTID and CUSTOMER_DETAILS.CUSTID !=(#CUSTOMER.customerid))
Operator Execution:
936 : 42000 : java.sql.SQLException: ORA-00936: missing expression
java.sql.SQLException: ORA-00936: missing expression
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_describe(T4CPreparedStatement.java:503)
     at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:965)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_maybe_describe(T4CPreparedStatement.java:535)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1051)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3026)
     at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
When i try to execute the scenario from command promt/java callout ..it is working fine.
Thanks.

Problem using default value of report parameter 1 to validate parameter 2 passed in to report

I am having a problem with an SSRS report using the default value of report parameter 1 to validate parameter 2 passed in to report (via C#) instead of using the value of parameter 1 that is also passed into the report. Here are the
simplified details:
Using SSDT, SQL Server 2008 R2
SSRS report has 2 parameters:
P1 -- text, hidden, default value 'R1', ... front-end C# code can pass 'R2' or 'R1'
P2 -- text, allows multiple values, list of available values provided by stored procedure (sproc_list) that takes P1 value as a parameter. Hence, sproc_list either provides a list for P1 = 'R1' or P1 = 'R2'.
List for P1 = 'R1' is 'A', 'B', 'C'
List for P1 = 'R2' is 'A', 'B', 'D'
Values for P1 and P2 can be passed in via C# to the report.
The C# front-end displays 2 report choices to the user, R1 and R2, where both choices call the same RDL; but choice R1 passes in 'R1' for P1, and the choice R2 passes in 'R2' for P1.
Upon a users 1st time use of the report no parameters are passed in. Then when the user exits the report, the parameter value for P2 that was chosen is saved off to a file for R1 or R2, and used the next time the user selects the report.
Everything always works fine for report R1 since the default value for P1 is 'R1'.
When R2 is chosen and the user selects 'D' as the value for P2, runs the report, then exits, the P2 value of 'D' for R2 is saved to a file. When the user returns the next day to run report R2, 'R2' is passed for P1, and 'D' is passed for P2.
This is when the problem occurs. The value of 'D' for P2 is validated against a list generated for P2 based on the default value of 'R1' for parameter P1. Hence, SSRS considers 'D' an invalid value for P2 and blanks out the P2 parameter.
The user can then use the drop down list for P2 and choose 'D', but this defeats the purpose of saving the parameter values to be used the next time.
Why is the stored procedure that provides a list of available values for parameter P2 using the default value of 'R1' for parameter P1 instead of using the value of 'R2' passed into the report for parameter P1?

Hi Tom,
Sorry for my delay.
If I understand correctly, you have two parameter in your report. It is a couple of cascading parameter. If we have choose ‘R1’ of P1, the P2 values is A, B, C. ‘R2’ of P1, corresponding P2 values is A, B, D. What your requirement is to save the end use
select option of these two parameters.
In SSRS, if we have configure the parameter with default value. When we run the report, the parameter will fill with the default value to filter data. If we want to save the last status we are render the report, we need to update the default value of P1.
If we are query the default value from database, if possible, we can
update the database try to resolve the issue. Alternatively, we can set the dynamic default value for the parameter.
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Where is the value of report repository stored in the database?

Hi all,
One of our developers is trying to write a code that would send the output report (pdf)of a process through mail, typical work flow stuff.But the problem is that we are not supposed to hard code the value of report repositiry from where the report has to be picked.can anybody suggest a table in the database from where the value of report repository can be queried.
we tried using
select reportrepositorypt from pswebprofile.
but this doesnt return the correct path. we went to PIA->peopletools->webprofile ->webprofie configuration
here we updated the value in report repository field and saved it and queried again.
But this didnt solve our problem.
Its showing the previous value which is different from the actual report repository path.
all the servers are in solaris box.
please suggets.
Thanks!

Right now, I am trying to send a PDF (XML Publisher report) as an email to our vendors (it is their ACH Advice).
What I have done so far is: Created an App Engine, one step to populate a state record with run control information and the second step that runs XML Publisher and creates PDF report(s) which are published to the Report Repository and saved to a file on our network. Now I think I just need to create a third step to recall the PDF(s) and send the PDF(s) out as emails to our vendors.
I have found that the PDF information from Report Repository is stored in the Database in the CDM_LIST_VW record (this is a view and the main underlying table is CDM_LIST, but this contains what I need for now, so I'm going to try using it first). The Report ID is stored in the CONTENTID field and the Report Description (description shown on the Report Repository -- which in our case contains the email address) is stored in the CONTENT_DESCR field. So I am going to try over the next week to write the logic to query the CDM_LIST_VW for the data needed for the email address and the ReportID to go and grab the file....The hardest part is finding the actual file but I am hoping that I can also find a URL on that table. I'd pull the file from the network, but XML Publisher writes them out into numbered folders where all the PDFs are named the XML Report Defn - thus same name). I have not tried any of this yet, but am hoping I'm on the right path.
I hope this helped answer your question.
Good Luck!
Jennifer

How to find report values using report writer

hi,
Please help me.
How to find report values using report writer
Regards,
RRK.
Edited by: Alvaro Tejada Galindo on Feb 6, 2008 12:01 PM

Thanks all for the reply.
I am trying to solve a problem where report parameter value that is set at Management Console is wiped out after calling replaceConnection.
databaseController.replaceConnection(oldConnectionInfo, newConnectionInfo,
null,DBOptions._doNotVerifyDB);
We have to support changing database connection from a java utility
class. But once replaceConnection is called all existing static parameter values are lost. To fix this issue we thought of getting parameters and values before calling replaceConnection and setting it after replaceConnection.
Version is CS2008 SP3 - version 12.3.0.601
If there is any other option of fixing the original wipe out issue?
ParameterValues.getValues() didn't return value. I will try ParameterValues.getCurrentCalues() but the document says ParameterValues.getValues() is equivalent to the IParameterField.getCurrentValues() method unless it is empty, in which case it is equivalent to the IParameterField.getDefaultValues() method.
So getCurrentValues() may not work.

How to enforce SCN of a datafile to the latest value?

Hello,
I try to restore old contents of my database on another server. The DB is not (and never was) in ARCHIVELOGMODE, and I have 2 cold backups of it. Neither backup set is complete (due to recycling of old tapes), but I still can restore all datafiles, though to two different SCNs. Out of 38 datafiles, 35 have SCN = 2458610942 and 3 have SCN = 2448133391.
SQL> select checkpoint_change#, count(1) as cnt from v$datafile_header group by checkpoint_change#;
CHECKPOINT_CHANGE# CNT
2448133391 3
2458610942 35
I believe, these 3 datafiles should still have usable contents, and hence would like to open DB as is.
RMAN> recover database;
Starting recover at 04-FEB-13
using channel ORA_DISK_1
using channel ORA_SBT_TAPE_1
starting media recovery
RMAN-08187: WARNING: media recovery until SCN 2448133391 complete
Finished recover at 04-FEB-13
RMAN> alter database open resetlogs;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 02/04/2013 18:17:06
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u01/oradata/GENERIC/system01.dbf'
Of course, there is no archived logs to update these 3 tablespaces.
Can I enforce SCN of these 3 datafiles to the latest value 2458610942? Or should I do something else?
Thanks already for your help!

user522816 wrote:
_ALLOW... sounds great! A description, please? docs, blogs...You need to be EXTREMELY AWARE that that parameter is classified as a hidden, udocumented parameter for good reason. If you don't know exactly what you are doing with it, you run a huge risk.
Your question is yet another classic case of focusing on some pre-concieved (and most likely, ill-conceived) solution to some un-stated business problem. If we knew that problem, we could give better advice than the dangerous use of hidden, undocumented parameters.

Latest Value to Show in Query

I'm trying to create a query where the latest value shows up on my query.
For example, my data looks like the following:
Week      Hours
05/2007   1360.0
06/2007   1360.0
07/2007   1440.0
08/2007   1440.0
09/2007   1400.0
If I have a variable on the week and choose a range from 01/2007 through 11/2007, I want the ending hours to show up as 1400.0. Currently, they show up as 0 since I don't have any data for week 11/2007. Any ideas on how I might be able to achieve this?
Any help is greatly appreciated.

Hi,
As per my understanding I believe that you need the latest data in the Date range inputted.
You can calculate the value using Formula variable. Populate the Forumula variable in the User exit based on the Date range value.
Thanks & Regards,
Namrata

Display latest value

Hi All,
I have a questions to ask. Is that i create a subvi for my table and it can display latest value at the top. Below attached snapshots of my programming. I uses a random number and stop button to control to let u guys see the whole process of what i want.
but when i change 'true/false constant' and using a numeric control. and i placed it back to my program. It won't lists down the values and it wont display the latest value at the top. what's the problem? I have been stuck at this problem for awhile.
and another question was how to keep the size of the listing be constant? for example, i onli wish to display 30readings on my table. as the programming kept running, the oldest value will be replace. because if kept running my programming, and the listing on my table getting more and more, means memory increases, result in lagging. I don't wish to happen. So is there a way to maintain the fixed table displaying values?
Solved!
Go to Solution.
Attachments:
table.ex.JPG ‏38 KB
table.ex1.JPG ‏41 KB
te1.JPG ‏98 KB

Hi Isabella,
I think the problem causes from initializing a shift register in sub vi. If you initialize a shift register, every time sub vi is called, it'll replace value in shift register with initialized value. Uninitialize a shift register should solve a problem. I attached a screenshot of my sub vi for your reference.
Regards, Kate
Attachments:
isabella.PNG ‏5 KB

Latest Value - Select Option - At Selection Value help

Hi,
I need the current values entered in the Select Option of the Selection Screen while generating the Value Help.
There are two selection option fields in the Selection Screen, Selopt1 and Selopt2, to generate the Value help of Selopt2 i need the latest values of the Selopt1, the function module dynp_read_values does not return all the values of the selectop option Selopt1 it returns only the first row of selopt1-high and selopt1-low, the function module RS_REFRESH_FROM_SELECTOPTIONS does not return the current values entered in the selection screen, is there any way to retrive the latest values of the select option in the event At Selection Screen on Value Request.
regards
Santosh

Hi Santosh,
When you go for f4 help on selopt2, you can use following code to get the current value of selopt1,
AT SELECTION-SCREEN ON VALUE-REQUEST
FOR selopt2-high.
select * from bkpf into table it_bkpf where
BKTXT in selopt1[].
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield    = 'BKTXT'
      dynpprog    = sy-repid
      dynpnr      = sy-dynnr
      dynprofield = 'Invoice Id'
      value_org   = 'S'
    TABLES
      value_tab   = it_bkpf .
IF sy-subrc <> 0.
    " do nothing.
ENDIF.
In selection screen, you can directly fetch the value of selection options or parameters by selopt1 or selopt2 (in your case by using AT Selection Screen for value request).
Reply for further doubts,
Please reward if useful.
Thanks and regards,
Ashlesha Desai
Edited by: ashlesha desai on May 26, 2008 6:06 AM

Latest Value Function

I'm trying to create a spreadsheet with a footer row that will contain the latest value entered (like in the Weight Tracker template's Most Recent Weight cell), but I can't figure which functions to use. Any help? Thanks so much!

lobbyart wrote:
Except it doesn't work... I just get errors. I've tried over and over to plug in equivalent cells to the formula on the template, but no combination is correct. If it were that simple, I wouldn't have come on here for advice.
la,
Coming here for advice works best if you are willing to patiently and completely describe your situation and enter into a dialog with the volunteer helpers.
I'm glad you found an answer, but as Barry noted, you haven't done any favors for others who may come here looking for answers to similar problems.
Jerry

How could I pass parameter that depend on values in report from report to form?

In my case, I want to pass 'gno' and 'qno' values of report
to form. When click on the button then the form is showed.
There are automatically values in gno field on form so that user
don't complete this filed.
So I create a button on the report . I enter Javascript in
PL/SQL Code tab in '...after displaying the footer' as follow :
htp.formOpen
(owa_util.get_owa_service_path||'portal30.wwa_app_module.link?
p_arg_names=_moduleid&p_arg_values=1736929105&p_arg_names=_show_h
eader&p_arg_values=YES&p_arg_names=GNO&p_arg_values=1&p_arg_names
=QNO&p_arg_values=2');
htp.formSubmit(null,'New Answer');
htp.formClose;
The above code can pass only static value, while I want to
pass values that depend on value in column of report to form.
So please tell me how can I pass this value to form. I look
forward to hearing from all of you. Please!!!!!!
Thank You

Thanks for the prompt reply.
Yes. I am using a Custom Step Type.
I have attached a trial code which contains the trial VI, sequence and the type palette ini file.
Please have a look at it.
Regards,
Mirash
Attachments:
Injection trial.zip ‏35 KB

How to pass value from report to form?

Dear,
I built a report and I create button on report too. This
button will show a form that I want it to automatically show
receivable values from report so that user don't complete them.
So I create a button on the report . I enter Javascript in
PL/SQL Code tab in '...after displaying the footer' as follow :
htp.formOpen
(owa_util.get_owa_service_path||'portal30.wwa_app_module.link?
p_arg_names=_moduleid&p_arg_values=1736929105&p_arg_names=_show_h
eader&p_arg_values=YES&p_arg_names=GNO&p_arg_values=1&p_arg_names
=QNO&p_arg_values=2');
htp.formSubmit(null,'New Answer');
htp.formClose;
GNO , QNO is value which I want to pass
As you can see, the above code can pass only static value.
But I want to pass values that is the condition of this report.
I mean,such as, this report show data that gno=1 and qno=2 and I
want to pass these values to form. So both value will appear in
gno and qno field.
So please tell me what should I do. Please help me. I don't
know how to do it. I look forward to hearing from all of you.
Please!!!!!! Don't hesitate to answer.
Thank you very much
Sirin Kittichotpanich

Hi Marc,
Yes, you have it correct in what I am trying to do and if I put a default value in the hidden item on page 2 and run it then that works fine. I just can't get the value from the form passed to page 2 for some reason. There are actually 22 items on the form that can be filtered but just using COREID for simplicity. When I run the form I am just entering a value in the COREID field to try and return those records. Most of the other items on the form are displayed as Popup LOV(fetches first row). Would the values of all these be done the same in a comma delimited list for the items and values? I was trying to get at least one of them working first. Here is the search result that comes up in the debug window:
Search Results
0.01: Item: P2_COREID HIDDEN
0.01: show report
0.02: determine column headings
0.02: parse query as: MOTEAMSAPEX
0.02: binding: ":P2_COREID"="P2_COREID" value=""
0.02: print column headings
0.02: rows loop: 15 row(s)
No data found.
Here is the SQL statement:
select coreid, serialnumber
from MOTEAMS.V_ASSETS where
instr(UPPER("COREID"), UPPER(:P2_COREID)) > 0
The branch settings are:
Set these items: P2_COREID
With these values: &P1_COREID (also tried this with period at the end)
I am new to this and not familiar with apex.oracle.com. How would I go about posting to that site?
Thanks,
Pam

Latest Value in Report

Similar Messages

Maybe you are looking for