Launchd does not work on Volumes under /Volumes during startup any more

Hi folks,
we have many launchd jobs launching scripts, binaries and resources from Volumes that are mounted in /Volumes. That worked fine so far.
Now with 10.5.8 the Volumes in /Volumes are mounted after launchd has started up LaunchDaemons. That means I cannot start anything that uses resources outside of the root volume during system boot; e. g. our Sybase database is located on a different volume, and now it cannot be started during system start any more.
Apple Care has confirmed this change of behaviour.
Is there any workaround for this restriction? We would have to repartition and move lots of stuff to get along with that.
Any hint or help is appreciated. Thanks in advance!
Dirk

hi pierre, try this search:
http://forums.adobe.com/search.jspa?q=iphone+&resultTypes=MESSAGE&resultTypes=COMMUNITY&da teRange=all&communityID=3384&username=&numResults=15&rankBy=10001
and especially this thread:
http://forums.adobe.com/message/2948219#2948219
cheers,
dave

Similar Messages

Hi guys, I have a big problem! My bookmark shortcut entry(command D) does not work anymore and do you know by any changes how to undo resetting of Safari? Thnx a million :)

Hi guys, I have a big problem! My bookmark shortcut entry(command D) does not work anymore and do you know by any changes how to undo resetting of Safari? Thnx a million

Try troubleshooting the Safari .plist file.
Quit Safari.
Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Relaunch Safari. Try a bookmark.
If that didn't help, check Safari / Preferences then select the Extensions tab. If you have any installed, turn that off, quit then relaunch Safari.
If Extensions aren't the issue, reset Safari. From the menu bar click Safari / Reset Safari. Select the top 7 buttons, click Reset.

Groups does not work in Mail under Mavericks

Its not just smart groups, by I cannot get any of my Groups to work with Mail under Mavericks. I am weary of having to type out the address for each person separately. Is there some better way?

I don't know why typing he name of a regular group does not work for you, but…
Another way is to open the address panel, select a group, then select all in the group, then click the two button.

TS1996 my zero key does not work as it should after software update any help

my zero key does not work after a software update when i try to use it /pp0 then volume symbol appears on the screen just happened after the update

Hello, pakie1.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that you may find helpful when experiencing keyboard issues.
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Cheers,
Jason H.

I have upgraded to Lion Os but my Network storage (Iomega Home Media Network hard drive) does not work with Time Machine. Are there any solution available?

I have upgraded to Lion OS only to find that my NAS (Iomega Home Media Network hard drive) does not work. It tells me that it is not configured. Are there any solutions . Have Iomega sorted out the problem?

Same issue here. Based on what I can tell, iomega still has not developed a solution to the problem. See below:
https://iomega-na-en.custhelp.com/app/answers/detail/a_id/28327/kw/Mac%20OS%20X% 20Lion

Oregon Trail does not work after update to Leopard...any thoughts?

After installing the software, whenever I attempt to open it, it opens the first "learning software" screen in fullscreen and seems to be flawless, but then it quits back to the desktop unexpectedly.
Any ideas on how to get this to work? (the oregon trail website is practically useless)
Thanks

This was a major upgrade for OS X.
The "10" in 10.5 references the base underlying operating system. The "5" in 10.5 indicates that it has MAJOR changes in the software code. The "1" in 10.5.1 indicates a MINOR change.
It would be like in the WINDOWS world WINDOWS 3.1 was replaced by WINDOWS 98. Then 98 was replaced by various versions of WINDOWS 2000, then WINDOWS XP. Finally VISTA.
Each one these left some software behind that would not work with the newer version. My point is that "OS X" is the name of the operating system and the ".5" is the latest version. And even Apple has to leave some software behind when it upgrades or the operating system would become too cumbersome and probably unstable if it had to be compatible with software from the beginning of time.
Message was edited by: ECSD3R32

ICloud does not work with Thunderbird 7.0.1. Any resolution?

Migrated to iCloud from MobileMe and reset imap server and password on Thunderbird per Apple guidnace (article HT4864) for third party setup. Does not accept password or reach server. Webmail access to iCloud via browser works fine, so password is correct. Any resolution or ideas? Thunderbird worked fine with MobileMe. Can I go back to MobileMe until Apple gets this figured out? (windows 7 prof, TB 7.0.1)

You see, that happens if one does not read the famous "minimum system requirements". They are not stated for joy and fun.
In other words :
on OSX Lion you must use iCal/Adress Book/ Apple Mail
on Windows Vista and Win7 you must use Outlook 2007 or 2010.
"Thunderbird" is just some "other" clients. And it is nowhere written that it is supported. Just like nowhere is written that XP or some older OSX is supported. Nex time read the requirements better.

Canon Pixma MP520 does not work with Airport under Leopard

Before this printer MP520 worked without any problem.
After installing Leopard, I can print through USB but not through Airport.
I installed all latest updates for Leopard, firmware for Airport and even the latest Canon driver.
I can see the printer in my Bonjour list. Then it looks like it's connecting and then an error window pops up. Error A 306, print attempt failing.
I also restarted Airport with and without printer connected.
Any hint is welcome

Resolved after complete re-installation of MAc OS X

Enhanced dictation does not work. I've tried everything. Any help?

Hello everybody. After downloading enhanced dictation (spanish-spain), the microphone seems to be Ok but no word is written. Regular online dictation works well. I use a mac-mini i7 16Gb and a micro connected to an external audio card firewire. I've tried to delete and download again several times, to clean the cache, turn on-off with resets,.. but nothing seems to fix the problem. Dictation is important for me to work and I'd like to try with enhanced dictation because I've read that it improves the performance with respect to online dictation.
I've empoyed such a lot of time looking for a solution in the support community and other forums but nothing worked.
Could anybody help me.
Thanks so much in advance

Ok, I reply to myself.
The problem was caused by the microphone and the firewire connection. Enhanced Dictation is not ready to work with my audio hardware (micro Shure and Presonus audio card via Firewire). Although this audio hardware works fine with other software and even with online dictation, when I use it with Enhanced Dictation, the system seems to be working (the micro bars of the microphone in the screen move ok) but no words are written at all.
The solution was to connect it analogically, using an audio connection between my audio card and the line-in connection of the mac mini (stereo).
Hope Apple will solve this problem. I guess many people probably are having the same problem, mainly people with pro audio cards. I hope that this will help them

HP Deskjet 3000 does not connect via Wireless to Windows 8.1 any more

Good day. My job requires me to move with my laptop (Asus X54C with NO bluetooth, only wireless) between multiple workplaces. One of these offices has an HP Deskjet 3000 wireless printer, which I used with no problem whatsoever under Windows 8.0 64-bit.I didn't even need to install its drivers, because Windows 8 would instantly recognise the driver's wireless signal.
Then a month ago I decided to update to Windows 8.1: after that, the printer suddenly stopped appearing in my “Network Connections”. I tried to uninstall the drivers and reinstall the 8.1 signed drivers by HP, but to no avail. The printer is recognised and works perfectly with an USB cable. I clearly recall seeing it on the right-hand pane (“Networks”), but since the 8.1 update it isn’t there anymore. The icon in the System Tray tells me that “connections are available”, but I can see no connections at all. In that particular office there is no Internet connection or other wireless connections apart from the HP printer (that however I cannot connect to). I'd like to point out that the wireless function is OK because a colleague of mine can still print using his Mac's Airport connection.
I have already posted in the Windows 8 (Microsoft Answers) Forum, but nobody has ever answered. You can find the thread here: http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/winows-81-not-finding-wireless-...
Any ideas?
Thanks in advance.

Hi,
Please reinstall the following package:
http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63287.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

T60 does not automatically connect to wireless profile at bootup any more

Probably my rose-colored-glasses mistake again.
I let the ThinkVantage system updater install most of the latest updates last night including the
wireless adapter software. Now, when I boot up, my PC no longer automatically connects to
my wireless profile. The radio is on and it is obvious it knows the network is there because it
is highlighted in the Access Connections menu with a Connect option.
It connects just fine when click Connect.
It will still automatically switch between ethernet and wireless when I plug and unplug the
ethernet cable even if I have specifically disconnected from the wireless connection before
plugging in the ethernet cable. It also automatically connects when I log off Windows and log back on.
Is there a setting some place that controls whether it should automatically connect to a
wireless profile at bootup?
I love the brain-dead online FAQ about this exact problem.
It says to click the Connect button if it happens.
Well, duh! What do I do to make it automatically connect like it used to?
I tried unchecking the "allow computer to turn off the radio" setting as other suggested.
But, my problem is not the radio being off.
Thanks

Hi sashton,
When troubleshooting Wi-Fi connectivity issues, I find the following resource has the most relevant information:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Furthermore, you may want to avoid giving your network a common name. While the following article (and excerpt) refer to iOS devices, the same applies for your Mac:
Avoid giving your wireless network a common name (SSID)
http://support.apple.com/kb/HT4450
If you were to give your wireless network a common name (SSID), users of your network who use iOS devices [sic] and are away from your network would run the risk of joining a different network with the same name. Having joined the unexpected network, they would be exposed to potential data theft.
Because of this security issue, Apple maintains a list of common or ambiguous SSIDs, including the default SSID for many commercially available access points, as well as the SSIDs "wireless" and "default". If your network's name is on the list, any iOS device [sic] that joins the network stores the access point's BSSID and associates it with the network's SSID. Subsequently, it will only auto-join the network if the access point's BSSID matches the information the device has stored. This avoids joining a different network with the same name.
Therefore, you may want to refer to the following article when configuring your Wi-Fi router:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Thanks,
Matt M.

html:link action="" input type="button"... does not work under IE browser

Greeting,
I have the following codes in struts1.3.5. It works fine under Firefox, but it does not work at all under Internet Explore (IT) at all. Any clues why under IE it does not work?
<html:link action="/private/search">
<input
type="button"
value="Search"
class="search-button">
</html:link>
Thanks a lot!

This would probably generate a HTML in which there will be a button inside anchor tag.
This is not a standard HTML feature and no wonder this is not supported by IE. I copied the generated html codes into test.html to try on IE, the button does not work at all.
Firefox is probably lenient here. True. test.html works in Firefox.
You might want to just have a link or do a form submission on button click.The action designed does not need an actionForm. I updated my code to :<html:button onclick="location.href='processSearch'"
property ="Search"
value ="Search">
</html:button>
And now both Firefox & IE works fine.
Thanks a lot!

N95 8GB unlokced , Vibrating alert does not work

Hi
I just bought used N95 8 GB from my friend which is locked to a network provider.
My friend took it to shop to unlock service provider (he didn't realise that service provider does it for free), now I tried to test income call vibration but it seems to me it does not work , I tried under Tool > Profile > Create new profile (vibrating on) ,,,,but still there is no vibration when I receive call!!!
I tried "Factory Settings" for the mobile but still same problem
Would unlock be the reason for that (I don't know if vibration was working before unlock) ?
Any other suggestion how to test that ?
Thanks

jimmyireland wrote:
1st see if you have the latest firmware installed, if you dont have the latest update and if problem still occurs after the update try a hard reset the code is Press *#7370#
if this fails you will need to take it to a nokia care centre.
1- Yes it already has updated firmware
2- I did a hard resst without any success.
3- Would unlocking process normally create this problem ?
Message Edited by zillah on 20-Jun-2009 12:02 AM

Issue with Apple Camera VendorID_0x106B ProductID_0x1570 green light blinks continually...camera does not work in photo booth or face time

Green light blinks continually...camera does not work in photo booth or face time.Any suggestions?

Hi Rogerya,
Thanks for using the Apple Support Communities. It sounds like you may be experiencing issues with the built-in FaceTime camera (also known as iSight) on your MacBook Air. The following resource provides relevant troubleshooting information that you can try:
How to Troubleshoot iSight - Apple Support
https://support.apple.com/en-us/HT2090
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
1. See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
2. See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
3. Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
4. Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
- Matt M.

Treo 700WX DUN: Does NOT work in Leopard! Anyone have luck?

I have a Treo 700WX with Sprint. I can't connect with Bluetooth or USB. When I used Tiger I was able to make it work just fine.
Now with Leopard...It does NOT work. The modem disconnects during connection. I just can't get online plain and simple.
At first I was blaming my Treo. But I tested it out on my Vista Partition and it worked! So the problem lies within Leopard.
Apple did a lowsy job on the Networking features in Leopard thus far.
*Has anyone gotten Leopard to use DUN (Dialup Networking) with a cellular Device?*
Again I'm using a Treo 700 WX (Windows Mobile 5) with the 1.15 software installed. I've also tried to install USB Modem (by Mobile-Stream) which enables USB connectivity. It still does not work. Same errors.
I was camping in the middle of nowhere for 5 WHOLE DAYS with no Internet!!!!!!! hehe jk I was actually happy about that. Excuse not to work! :P But there may be a day when I need DUN.
I don't have the "Phone as Modem" through Sprint. However you don't need it on your plan for this phone.

MikeyPD,
Sprint DUN is working just dandy for me, but I am using phone-as-modem, and with an A900M, not a Treo. You probably know more about the differences than I, but I would expect they both use the same protocols to connect (on both ends).
For me, it was a snap to set things up in Leopard. Actually easier than Tiger. Do you use a standard DUN connection, or must you use some other method for the Treo, running Windows Mobile?
Assuming it is standard DUN, let's go through the steps. First, is there any indication that the Treo is recognizing the connection as a request for DUN service (for example, my A900M clearly states that it is being used as a Data Modem)? Do you have the modem script set to dial #777? OK, here's the "Duh!!!" question: Do you have the modem script set to ignore the dial tone? If you do not have it set to "ignore," it will immediately fail every time.
Scott

Launchd does not work on Volumes under /Volumes during startup any more

Similar Messages

Maybe you are looking for