Layers revert on open - HELP

I have an old pdf with several layers - back then in 2008 I created javascript to turn on and off layers with a pop up - now in 9 when I select the layers that I want on with the eye or the layer control javascript - hit save and open. all the layers revert to some pre-ordained visability and I loose my work. Is there some list deep inside the pdf that holds the original layers on/off settings? Funny thing is that when I open the file - for a second - I see the layers I turned on and then they turn off. What gives. Is there a way to make the file open with the last visible set of layers? Please help - business depends on it. Thanks

Changing the "eye" symbol on the layers panel is only a temporary effect. Right-click each layer, choose Properties, and you will see the options for the initial (default) view state of the layer.

Similar Messages

Can I close all layers? or even better, stop illustrator from opening all layers when I open a file?

I just installed cs6, and when I open files in Illustrator, it opens all of the layers which contain sublayers. It does this even if all the top-level layers were closed during the previous save. The files I work with have a large layer-structure, so re-closing the top-level layers every time I open a file wastes a lot of my time. Can I close all layers at once, or better yet, can I stop Illustrator from opening all of the layers automatically when I load a file?
If not, then WHY on earth not? I can't be the only one who opens and closes large files with lots of layers and sub-layers...
Thanks for your help.
Edit: I also am noticing this problem is even worse in cs6, because openning and closing individual layers plays a little animation of rotating the triangular arrow before the layer which, cute as it may be, just makes the task of individually closing up all my layers that much more tedious. Can I turn off that little animation of the triangular arrow when opening and closing layers?

You can save it as a pdf and when you open that in AI the layers will not be opened even if they have sublayers.
Not true. Does the same nonsense an .AI file does. Saved as a .PDF, closed Layers/subgroups get opened.
And no one cares!
I do. Every other Adobe program with a layering sceme seems to be able to remember that you saved a file with all layers and subs closed. But not this one.
Maybe someone from the AI development team should ask someone from the Photoshop team how they've managed it.....for decades.

Why does a my layered Illustrator file open with only one layer, when opened by someone else?

I am using CS6, as is the other user. When they open the file in Illustrator all the artwork is on one layer, even though the original file has numerous layers, and opens with these layers when I open it even now.
I have never come across this problem before in all the years I have used Illustrator and have had no joy when trying to search for this problem.
Any ideas or help would be greatly appreciated as it is confusing us!
Thank you.

Hi Mike, Wade & Larry,
Thank you so much for your replies.
Since I posted this issue, I was later informed that the other user is infact opening my files with CS5 and so a quick solution to this was saving it down to a previous version! Sorry for the confusion!
This problem then becomes clear that it was a version error, but I have always had an error message come up if I try to open something that was created in a newer verion - is this no longer the case?
I have been assured no pop up messages appear when opening the file which I find odd, and also that this layer compression has only just started happening even though many files have been back and forth previously.
A little mystery! At least for now it is all working ok again
Thank you all very much, greatly appreciated.

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files?

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files? What can be done so that I can either open and see the layers or how can the sender save it in a way that it doesn't "merge" the layers in some way to just one?

Could try saving as tiff provided layers and transparency are chosen at the time of saving. But it's hard to give a definitive answer as it depends on the final usage. For example PSD's tend to work better in applications like In Design in comparison with tiff.

I've downloaded free trial versions of illustrator and photoshop but software not opening.Help!

I've downloaded free trial versions of illustrator and photoshop but software not opening.Help!

Nobody can help you with at least some system information....
Mylenium

Every time I try to open Photoshop Elements 12, it opens the Adobe login, after I login the program does not open:( Help please?

Every time I try to open Photoshop Elements 12, it opens the Adobe login, after I login the program does not open:( Help please?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Itunes will not open/launch on my desktop. There is no systems error message etc. It just won't open, help?

My Itunes will not open/ lauch on my desktop. There is no systems error message etc. It just will not open, help?

reset utility should help...for mac
http://www.apple.com/support/downloads/ipodresetutility103formac.html
for windows
http://www.apple.com/support/downloads/ipodresetutility104forwindows.html

When I try to open Help in Vector Works 12.5.5, nothing happens. It works fine when I switch to Safari as my browser. I'm running on a 10.5.8 Mac. It worked fine last week. Any ideas?

When I try to open Help in Vector Works 12.5.5, nothing happens. It works fine when I switch to Safari as my browser. I'm running on a 10.5.8 Mac using Firefox 3.6.3. It worked fine last week. Any ideas?
== This happened ==
Every time Firefox opened
== today

Wow! You're amazing! It's now ok! Thanks so much!
I just thought that Rapport will help me to be more secured but I didn't know that it has a side effect. haha!

Open help in new window

Hi,
I use following to link OHW
<af:goLink text="Help" destination="#{adfFacesContext.helpProvider['title.htm'].externalUrl}" targetFrame="_blank" />
when i click the link, it opens help in new tab. How do i open new window without toolbar.
I tried using <af:clientListener />. clientListener opens new window but goLink also opens help in new tab.
My requirement is to have "Help" text or button which, onclick opens help.
Kindly suggest me.
Tilak

Is this still an issue for you?
Also, please note that we recently release a new version of Oracle Help, version 5.0, available here:
http://www.oracle.com/technology/tech/java/help/index.html
Regards, Maria

I can't open my adressbook. I also can't open 'help

I can't open my adressbook. I also can't open 'help', not the one of addressbook but also not that of finder.

System cache cleaning programs can cause the launch services to get corrupted making Apple applications fail to launch. Do not use such programs.

CANNOT OPEN HELP

I am using ID CS on windows XP pro. I was trying to open help but just get notepad pop-up that's full of gibberish and then IE opens and locks up. I use maxthon as my usual browser. If I have maxthon open, the ID help opens just fine. Is there a way to set maxthon as my default browser for help? This just started today. Any help would be greatly appreciated.

From the Owners Guide http://www.palm.com/us/support/handbooks/treopro/treoproT850E_UG.pdf But I dont think its what your looking for.
Setting options for rejecting a call By default, when you reject an incoming
call, the caller is sent to voicemail. You can
change this setting so that, in addition to
sending the caller to voicemail, a text
message opens. This message contains
default text and is addressed to the caller
so that you can send the message right
away. You can also change the default text
of the message.
1 Press Start and select Settings.2 On the Personal tab, select Phone .3 Select the Advanced tab.4 To turn on the text message feature, check the Reject call with text
message box.
5 (Optional) To change the content of the message, select the text in the box and
enter the text you want.6 Press OK .

What's with the cute bear and SUMO on the opening help page?

Firefox's opening help page has a picture of a cute bear and some kind of add for SUMO. Does any one know why it is there?

It's possible that you are coming out of a remote terminal or remote DSLAM, rather than a full blown central office. Verizon seems to have an unspoken rule or habit of only provisioning 3Mbps and below to customers on the remotes. To augment that, it's been seen in some cases that they are running Fiber to the remotes, but only supply the equivalent of several T1 circuits rather than OC-3 Fiber or better.
To find out why the speeds are being limited, we would need to know what kind of DSLAM is in use, and how far you are from the nearest Verizon CO. The attenuation you have suggests you're one mile of wire length away from the source of DSL, which is either an RT or a CO. From that point, we would also need to find out what kind of connectiivty Verizon has running to your DSLAM.
If you're coming out of a CO instead, it's also been seen that Verizon has a habit of selling only 3Mbps out of congested COs or those with lesser connectivity running to the CO.
The thing you can do, is pressure Verizon into giving you at least 7Mbps. With those stats you should have no problems at all. It's going to take weeks of pushing to get the job done, but it is possible. I'd start off by calling Techincal Support, who would be able to assist with this. Emphasize to ignore the availability database - this is just a bunch of records controlled by what Verizon wants to input in.
========
The first to bring me 1Gbps Fiber for $30/m wins!

After reloading adobe creative suite cs3 on my mac 10.4.11 acrobat will not open any pdfs it previously opened. help!

after reloading adobe creative suite cs3 on my mac 10.4.11 acrobat will not open any pdfs it previously opened. help!

hello.   hey, thanks very much for writing back. i got some good info with a search or two. (info about what regedit is and what corresponds to it in OS X -- regedit allows you to edit "preference" keys for individual programs, OSX's equivalent for these keys are the .plists in User & System: Preferences and Application Support)
what i ended up doing was uninstalling Premiere Pro (not the suite, just PPro).   Then i deleted a few preference files:
from User /Preferences/Adobe:
com.adobe.AdobePremierePro.plist
com.Adobe.Premiere Pro.5.0.plist
and from System Preferences:
the file: Adobe Premiere Pro Prefs
and..
/.../Premiere Pro/5.0/...
AMEPrefs.xml     (i noticed that there's also a preference file in Media Encoder's own folder so i didn't sweat this one)
Debug Database.txt
Placeholder Preset.epr
PostEncodeCmds.pref
PresetCache.xml
Trace Database.txt
NOTE:
of course i don't know if deleting any files beyond the 2 .plist files in User Prefs was necessary, but... it seems to have worked.
I then reinstalled Premiere Pro CS5, and fired up an old project and i've got playback of HD and DV files, and snappy editing and rendering, so hopefully i'm good to go.   I'm just going to stick with v5.0.0 because i actually don't remember ever having any trouble with it, and i don't remember v5.0.4 adding anything i was 'missing' or 'needed'
hopefully, this thread will be useful for any future folks that run into trouble - and it's got a solution for both Windows and OS X
happy editing,
peace

How do I open HELP with Photoshop Elements12?

Hi, I haven't used PSE in awhile and recently bought PSE release 12 so I went through looked at the Users manual, view the Online videos and wanted to check on HELP and the dropdown menu Photoshop Elements HELP (PF1) but nothing happened. I did this is in all three modes (Quick, Guided and Expert) but "help" did not appear so my question is, how do I open HELP with PSE12?
Thanks,
Bob
P.S.- my objective (what I was looking for) were the step by step instructions on how to straighten a photo

To automatically straighten the image and leave the canvas around the image, choose Image >> Rotate >> Straighten Image.
The straightened image contains areas of blank background, but no pixels are clipped.
To automatically straighten and crop the image, choose Image >> Rotate >> Straighten And Crop Image.
The straightened image does not contain areas of blank background, but some pixels are clipped.
If you have a photo with an horizon you can drag a line along it with the straighten tool.
Click Help on the top menu bar for the on-line help files.

Photoshop crashing, Lightroom not opening, help to fix please?

I paid for and downloaded Creative cloud last week, and have installed Photoshop, Lightroom and Bridge. When I went to use these programs I found that Bridge works, Lightroom won't even open, and Photoshop tends to crash after 3-5seconds upon opening. There is no crash report, or any other sort of explanation, and I tried logging off of creative cloud and back on again as the solution options say to do, however this hasn't had any affect on either Lightroom or Photoshop.
Oddly enough, the Camera Raw editor will work, but when I try to open the photo into photoshop, Photoshop again closes, this time asking if I want to save changes to my image. Selecting yes allows me to save the image and then closes, selecting no closes everything.
It's very frustrating.
My computer is an HP Pavillion, I think it's a notebook, but not sure.
I'm running Windows 7 with the following processor: Intel Core i3-2310M CPU 2.10GHz
4gb RAM and a 64bit operating system.
Can someone please help me sort this out? I'd really like to be able to use what I paid for

Hello,
After having contacted Adobe by phone (very professionals) i tried what
they told me to do and everything is fine now.
First i was told to run windows in "minimal" mode", that means without any
service except the microsoft ones by using msconfig.
Then install : "AdobeCreativeCloudCleanerTool"from Adobe; in the dos
windows chose "all", that will delete all previous install of adobe
products.
After that, you'll have to delete every adobe folder you find in this
places :
C:\Programmes\Adobe\
C:\Program Files\Adobe\
C:\Program Files (X86)\Adobe\
C:\Programmes\Common Files\Adobe\
C:\Program Files\Common Files\Adobe\
C:\Program Files (X86)\Common Files\Adobe\
C:\Programmes\Fichiers Communs\Adobe\
C:\Program Files\Fichiers Communs\Adobe\
C:\Program Files (X86)\Fichiers Communs\Adobe\
C:\ProgramData\Adobe\
C:\Utilisateurs\:
Photoshop crashing, Lightroom not opening, help to fix please?
created by maliet90 <https://forums.adobe.com/people/maliet90> in *Photoshop
General Discussion* - View the full discussion
<https://forums.adobe.com/message/6690296#6690296>

Layers revert on open - HELP

Similar Messages

Maybe you are looking for