When I try to open Help in Vector Works 12.5.5, nothing happens. It works fine when I switch to Safari as my browser. I'm running on a 10.5.8 Mac. It worked fine last week. Any ideas?
When I try to open Help in Vector Works 12.5.5, nothing happens. It works fine when I switch to Safari as my browser. I'm running on a 10.5.8 Mac using Firefox 3.6.3. It worked fine last week. Any ideas?
== This happened ==
Every time Firefox opened
== today
Wow! You're amazing! It's now ok! Thanks so much!
I just thought that Rapport will help me to be more secured but I didn't know that it has a side effect. haha!
Similar Messages
-
I have already tried deleting my mail accounts twice. I have also reset it to factory settings.
Try here > iOS: Device not recognized in iTunes for Windows
-
Bridge CC keeps crashing on start up but was working last week - Any Ideas how to get it back. Have tried uninstalling and re installing software. All other CC software working fine (Mac)
Also some problems since the CC2014... For me i can launch bridge but the crash occurs when i try to change access to any bridge preference... i open a discussion about it
-
I just upgraded to Yosemite. Now when I try to open one particular document in Excel, I get a message that there's not enough memory. I can open other documents. The document I can't get to is the spreadsheet of my passwords. Go figure. When I check the storage under "about this Mac" it says I have 150 GB of 249 GB. I have a MacBook Air. Help please. Thanks, Connie
I just upgraded to Yosemite. Now when I try to open one particular document in Excel, I get a message that there's not enough memory. I can open other documents. The document I can't get to is the spreadsheet of my passwords. Go figure. When I check the storage under "about this Mac" it says I have 150 GB of 249 GB. I have a MacBook Air. Help please. Thanks, Connie
-
When I try to open itunes i get a small box that says....This version of itunes has not been correctly localized for this language. Please run English version. Help please!
June 2014, iTunes not localized - https://discussions.apple.com/thread/6306009 - language settings
-
I have ab HP 3250 e all in one printer. I have downloaded the software and installed on my Mac Book Air running OS X Mavericks. When I try to print from the Mac Book it shows that it is printing but nothing happens at the printer end. Why?
For some reason I cannot synch my iPhone notes with the Mac Book. How dodo I do this?
How do I change my primary email address on the Mac Book?Hello Bruarong,
It sounds like you are unable to print to your printer from Mac OS X Lion. I recommend the troublehsooting from the article named:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
Take care,
Sterling -
The sound isn't working. And it also does not appear, when i try to adjuct it with the buttons the sound bar doesn't appear and when i try playing music at the bottom the sound bar disappeared. How do I fix this?
Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device. Have you gone through ALL of these troubleshooting steps?
If you have gone through all the troubleshooting steps and you're still having problems, you'll need to bring your phone into Apple for evaluation. -
i upgrade my 3gs to os 6.1 but starting then all my manually installed apps does work and every time I open them, it asks me to log in to my apple account but responds that my password is incorrect. I tried to change my password but i never received the confirmation email. Does anyone know how to fix this?
Hi,
iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
AN @mac.com name can be used on any version of iChat (Until the 30th June 2014)
As it does not need a double check with Apple you can use it to log in to the AIM Web pages
Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
Select the Library that appears in the menu list.
Navigate to Preferences.
(If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
Fnd com.apple.ichat.aim.plist (even if you are using Messages)
Drag the file to the Trash and Restart the app.
7:39 pm Thursday; May 29, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
This happens when I use Firefox. I currently am using Firefox 4.0
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
Also, I'm due for an upgrade to the new iPhone. Should I just wait for my new iPhone?
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
I just got a new iPad air and started going through the set-up process. Now, I can't swipe to power down or power up. Advice?
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I just can not load the netflix app. I touch the load app and na da.
It appears that you have apps that need updating that were pruchased from more than one account
- Go to settings>Store and sign out and sign into your account.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account. -
When I try to add a video file to my itunes library nothing happens
I have tried dragging and ctrl+o but nothing has happened.
What format is your video file? Itunes only support mov, m4v, mp4 formats.
-
I recently purchased an external hard drive to back up my iMovies. When I try to open the movies on the backup I get a message "you may not have permission to modify that folder" How do I change permissions on the backup?
Hi
One Must NEVER move or alter any folders named
• iMovie Event's - or -
• iMovie Projects - or - alike
on DESKTOP/FINDER - Ever ! - ONLY Within the iMovie Program ! else all connections are broken and hard to impossibly to mend !
but rather do as described here under
Moving Event's and Project's
Connection - Either connect one Mac in Target mode to the other via FireWire. Or use an external hard disk !
(Target-Mode - Start one Mac e.g. laptop - BUT keep T-key down during full up-start - Now a FW-symbol is jumping around the screen and it will work as an external hard disk when connected to the other Mac)
A. The External Hard Disk - MUST BE - Mac OS Extended (hfs) formatted to work for Video. UNIX/DOS/FAT32/Mac OS Exchange works for most other things but not for Video whatever program is used (iMovie or FinalCut)
B. Should be a FireWire one as USB/USB2 performs badly to me and especially when filling up
C. Do never Move or Alter any folder named
• iMovie Event's - or -
• iMovie Project's
on DeskTop/Finder - as this will result in iMovie losing connections to them and repair can be anything from hard to impossibly
D. Moving and Copying must be done within iMovie application and Events to Events - and - Project's to Project's.
E. Moving Project's to Event's - Do not work for me - I have to export project as a QuickTime movie then Import this into Events.
Event's window can show two faces
Like this
or like this
from one hard disk Event - You can move it to the other hard disk
You can not (at least not me) move Event to Project or other way around only
Event to Event and Project to Project
Yours Bengt W -
Photoshop CS5 shuts down when I try to open a file or save something.
I'm not sure what I have done, but I just used it a few days ago with no problems. I could open files from the file menu and save-as things. Now when I try to open a file from my documents folder it shuts down. What is the problem. I have tried to uninstall photoshop and reinstall with a few things that are now working (something about the color scheme had to be switched to windows 7 basic and I couldn't save-as things), but this one problem is still there. Any help? I am super computer illiterate, so if you talk about third party plug-ins or things like that, I have no clue what that means.
Thanks
TiffanyLog Name: Application
Source: Application Error
Date: 2/10/2012 3:24:07 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Tiffany-HP
Description:
Faulting application name: Photoshop.exe, version: 12.0.4.0, time stamp: 0x4d9d8cbc
Faulting module name: QuickTime.qts, version: 5.0.2.15, time stamp: 0x3b313300
Exception code: 0xc0000005
Fault offset: 0x002d12b5
Faulting process id: 0x1dfc
Faulting application start time: 0x01cce842ab287cd7
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Photoshop.exe
Faulting module path: C:\Windows\system32\QuickTime.qts
Report Id: f1f08af8-5435-11e1-8803-b88ca4be16ac
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-02-10T22:24:07.000000000Z" />
<EventRecordID>22752</EventRecordID>
<Channel>Application</Channel>
<Computer>Tiffany-HP</Computer>
<Security />
</System>
<EventData>
<Data>Photoshop.exe</Data>
<Data>12.0.4.0</Data>
<Data>4d9d8cbc</Data>
<Data>QuickTime.qts</Data>
<Data>5.0.2.15</Data>
<Data>3b313300</Data>
<Data>c0000005</Data>
<Data>002d12b5</Data>
<Data>1dfc</Data>
<Data>01cce842ab287cd7</Data>
<Data>C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Photoshop.exe</Data>
<Data>C:\Windows\system32\QuickTime.qts</Data>
<Data>f1f08af8-5435-11e1-8803-b88ca4be16ac</Data>
</EventData>
</Event>
Maybe you are looking for
-
French characters are not correctly stored in database with SQLPlus
Hello everyone, I would like to do the following: Run an SQL script that inserts/deletes/updates data. The data itself may be French or non-English characters .Currently, we do this by just running a script that invokes SQLPlus and runs the various S
-
Plain text emails do not display content when Usin...
While testing the Nokia E71 as a possible phone to enable those of our workers who sometimes go on the road to access their emails using, an IMAP4 connection, I noted plain text emails just displayed the sender and subject line. The text of the mess
-
I can't download the itunes in my mac book
I can't download the itunes in my mac book,What can I do?
-
A question about control panel.
Click the up arrow on the control panel,then,pop up the subpanel.I want to create a password dialog before pop up the subpanel,only you put the right password,the subpanel was popped up. what shuold I do?thank you.
-
Hi, 0 Vu ( -20 dbfs) is a good reference level for pretty strong voice over and it is generally accepted. But when it comes to music, say, a 10 sec ouverture, can we go over 0 VU ( -20 dbfs) for some periods of time ? I ask the question, because, if