Layout for one-child container

Fairly often it comes up that I want to put just one child in a container, and for it to resize etc. with the container.
What layout do people usually use in these circumstances?

BorderLayout and component at Center.

Similar Messages

2 layouts for one screen

Hello everybody,
I'm working with RF screens, assigning phisical screens to the standard logical screens. For one of the screens, I have to show two completely different layouts depending on the value of a couple of fields. Since it's related to RF, the size is 8x40 and any of the layouts would occupy the whole screen.
Is there any way for me to define the two whole layouts, and show one or the other depending on the value of a field?
Thank you very much in advance.
Jose.

I've found the solution. It would be just to create two subscreens with the different layouts and create the main screen as a subscreen container. Then, on the main screen PBO call one of the subscreens or the other.

Invoking BPEL partnerlink each for one child node

Hi
I have a requirement for invoking partnerlink (DB Adapter) for each child node of input message of BPEL service! E.g. I have to update or insert an employee! I received list of of employees in input message like below.
<employee_list>
     <employee>
          <name> Ram </name>
          <Age> 21 </Age>
          <dept> IT </dept>
          <isNew>N</isNew>
     </employee>
     <employee>
          <name> Hari </name>
          <Age> 21 </Age>
          <dept> IT </dept>
          <isNew>Y</isNew>
     </employee>
</employee_list>
So the requirement is to call DB_Call partnerlink for each employee node in above!
Is this possible in BPEL? If yes, how?
Thanks In Advance
Priyadarshi

Yes you can, use a fo reach loop in bpel, loop for the count of employee, then have an if condition to check whether you want to update or insert for and use invoke node to call the appropriate operation.I hope you have gone through the upsert operation in database adpater which automatically supports insert or update. If a record is present it updates else inserts a new one.

Remove PR Mandatory for PO and Assign new PO Layout to one User

Hi Experts,
I want to remove PR mandatory for PO and assign new PO Layout for one User. I am facing following problem.
1. I have already created a function authorisation Z1 with reference to PR and assign the same in SU01, Paramenter EFB - Z1.
Now I have removed ref to purchase requisition tick and assign new PO layout in Z1.
But ref to PR not removed, and new po layout is not coming.
What should I do.
Thanks in advance.
GR

why dont u assign the new PO screen layout to the PO document type thru spro-mmpurchasingpo-define document type---here assign ur new field selection with the PO document type coz whatever the screen layout of PO comes while processing me21n,it comes due to the field selection present here as per my knowledge.
regards,
indranil

'Missing layout for container' error on deleted child containers

Hi all, here was the problem: I have a Web Dynpro app built using NWDS 7.1 SP01 PAT0000 Build ID 200811152209. In this app I have a view where I had existing containers and child controls. I selected one of my existing transparent containers and used "Copy / Paste" to make a copy of it. Then I went underneath the pasted transparent container (which of course had a copy of all the original child controls) and started deleting the ones I didn't need.
When I did a deployment, however, I had this strange set of errors:
[wdgen] [Error]   TransparentContainer 'tcPortHdr1.Layout': Missing layout for container.
[wdgen] [Error]   TransparentContainer 'tcPortHdr1': Missing 'Layout'.
[wdgen] [Error]   TransparentContainer 'tcPortSelect1.Layout': Missing layout for container.
[wdgen] [Error]   ScrollContainer 'tcPortSelectData1.Layout': Missing layout for container.
[wdgen] [Error]   ScrollContainer 'tcPortSelectData1': Missing 'Layout'.
[wdgen] [Error]   TransparentContainer 'tcPortSelect1': Missing 'Layout'.
[wdgen] [Error]   TransparentContainer 'tcPortNew1.Layout': Missing layout for container.
[wdgen] [Error]   TransparentContainer 'tcPortNew1': Missing 'Layout'.
The funny thing about these guys--they were the child controls I had deleted from the designer UI after doing the paste. In the graphical view designer, they didn't show up. However, when I do a search for one of the offending items (say, tcPortHdr1) using Ctrl+H, then I get one match found in RoadMap03SelectMethodView.wdview. That makes sense; it's the file SAP uses to create the view.
Double-clicking on that file brings up the visual view designer, which does not show the "missing" control in question. So, I tried right-clicking on the wdview file and using the Open With... -> Text Editor option. That brings up an XML file and voila the control is in there:
<TransparentContainer name="tcPortHdr1">
<ViewElement.Definition>
    <Core.Reference package="com.sap.ide.webdynpro.uielementdefinitions"
      name="TransparentContainer" type="UIElementDefinition"/>
</ViewElement.Definition>
<UIElementContainer.Children>
    <UIElement name="ftvPort1">
      <ViewElement.Definition>
        <Core.Reference package="com.sap.ide.webdynpro.uielementdefinitions"
          name="FormattedTextView" type="UIElementDefinition"/>
      </ViewElement.Definition>
    </UIElement>
</UIElementContainer.Children>
</TransparentContainer>
Wow! Even though I have deleted the child controls from the UI, they are still in the XML file. So, just for kicks, I try deleting the controls manually from the XML file using this handy-dandy regex and CtrlF: *Port[\w_]\d*
The above regex found four controls (all of 'em, of course, I had already deleted from the designer using the UI). I do another deployment and the build works great! So, it looks like problem solved and the only issue being some nasty little bug in the UI that doesn't really delete controls from the backing XML file when you delete them from the visual designer, right?
Edited by: ANDY BRUCE on Feb 3, 2009 7:24 PM
Edited by: ANDY BRUCE on Feb 3, 2009 7:29 PM
Edited by: ANDY BRUCE on Feb 3, 2009 7:30 PM
Edited by: ANDY BRUCE on Feb 3, 2009 7:30 PM

Dear Andy,
I think this should go in the Web Dynpro forums?!
Regards,
George.

'Missing layout for container' error on deleted child container

At times in Web Dynpro apps I run into this compiler error. I thought I would share my investigation into it.
Hi all, here was the problem: I have a Web Dynpro app built using NWDS 7.1 SP01 PAT0000 Build ID 200811152209. In this app I have a view where I had existing containers and child controls. I selected one of my existing transparent containers and used "Copy / Paste" to make a copy of it. Then I went underneath the pasted transparent container (which of course had a copy of all the original child controls) and started deleting the ones I didn't need.
When I did a deployment, however, I had this strange set of errors:
[wdgen] [Error]   TransparentContainer 'tcPortHdr1.Layout': Missing layout for container.
[wdgen] [Error]   TransparentContainer 'tcPortHdr1': Missing 'Layout'.
[wdgen] [Error]   TransparentContainer 'tcPortSelect1.Layout': Missing layout for container.
[wdgen] [Error]   ScrollContainer 'tcPortSelectData1.Layout': Missing layout for container.
[wdgen] [Error]   ScrollContainer 'tcPortSelectData1': Missing 'Layout'.
[wdgen] [Error]   TransparentContainer 'tcPortSelect1': Missing 'Layout'.
[wdgen] [Error]   TransparentContainer 'tcPortNew1.Layout': Missing layout for container.
[wdgen] [Error]   TransparentContainer 'tcPortNew1': Missing 'Layout'.
The funny thing about these guys--they were the child controls I had deleted from the designer UI after doing the paste. In the graphical view designer, they didn't show up. However, when I do a search for one of the offending items (say, tcPortHdr1) using Ctrl+H, then I get one match found in RoadMap03SelectMethodView.wdview. That makes sense; it's the file SAP uses to create the view.
Double-clicking on that file brings up the visual view designer, which does not show the "missing" control in question. So, I tried right-clicking on the wdview file and using the Open With... -> Text Editor option. That brings up an XML file and voila the control is in there:
<TransparentContainer name="tcPortHdr1">
<ViewElement.Definition>
    <Core.Reference package="com.sap.ide.webdynpro.uielementdefinitions"
      name="TransparentContainer" type="UIElementDefinition"/>
</ViewElement.Definition>
<UIElementContainer.Children>
    <UIElement name="ftvPort1">
      <ViewElement.Definition>
        <Core.Reference package="com.sap.ide.webdynpro.uielementdefinitions"
          name="FormattedTextView" type="UIElementDefinition"/>
      </ViewElement.Definition>
    </UIElement>
</UIElementContainer.Children>
</TransparentContainer>
Wow! Even though I have deleted the child controls from the UI, they are still in the XML file. So, just for kicks, I try deleting the controls manually from the XML file using this handy-dandy regex and Ctrl+F:
*Port[\w_]+\d*
The above regex found four controls (all of 'em, of course, I had already deleted from the designer using the UI). I do another deployment and the build works great! So, it looks like problem solved and the only issue being some nasty little bug in the UI that doesn't really delete controls from the backing XML file when you delete them from the visual designer, right?
Edited by: ANDY BRUCE on Feb 3, 2009 11:52 PM
Edited by: ANDY BRUCE on Feb 3, 2009 11:54 PM

Thanks for the advice, but I'm not interested in fixing the problem. Just in giving someone else some keywords to help resolve the problem

Defining Report LayOut for a parent child report

I have a parent child report. I want to print this report in PDF using BI Publisher. Now I wanted to define a layout for that report using BI template builder. My stratagey for defining Report layuout is
1. Write a query containing all fields that I need
2. Convert that query data to XML, one way or the other
3. Load that XML into template builder.
4. Define the layout.
Now the problem is that I need some fields for parent and some from child. If I do not use group buy clause in the query I will not be able to use the tabular format in template builder (taht I wanted to use).
IF I use a group By caluse then I am unable to select the child fields as they are not the part of group by clause.
Plz help

You have 2 repeating frames: R_contracts and R_ads. Create a frame M_disclaimer after R_ads, within R_contracts to hold the disclaimer page. This page will print after all the ad records have been printed, and before the new contract starts.
You can set Page Break Before on M_disclaimer to print this frame on a new page.

Can more than one child be visible/open at the same time in Accordion navigator container?

I have a situation where I need a layout like Accordion
container but with more than one child panel visible at the same
time. Is it possible with Accordion container? If not, any
suggestions to implement this layout?

Ryan,
Could you elaborate on what you mean when you say that the program which ran first cannot find its report? Are you trying to modify the same report simultaneously with these different apps?
Regards,
Jared Boothe
Staff Hardware Engineer
National Instruments

How do I use family share to setup a new device for my child when I don't already have one with iOS 8?

My kids want apple products.
I don't own any.
I buy an iPad for one and an iPhone for the other, but I can't set them up because they require me to setup Family Share and create accounts. I can't do that because I don't have a device with iOS 8 already setup.
I do have a valid AppleID. I've had it for years. I use it with iTunes.
I wish they would just let me manage the account setup and Family Share through a web page. Right now I'm dead in the water and Christmas is approaching fast.

I have found a solution.
It turns out that all the documentation I could find on the web was wrong. At least in the case of the iPad I just bought. I did manage to borrow a device so that I could setup family share and the kids accounts, but when I went to enter the new existing account into the setup of the iPad, it then started leading me through the process to create the account (clearly it didn't bother to check if it really existed already). In reality, I believe had I just entered a "new ID" for my child, that didn't exist, it would have led me through the same process. As it was, I had to back out to the first screen and skip the creation process, since I had already created the IDs elsewhere.
The only part I'm not clear on, is if I still would first have needed to turn on family sharing for my ID before starting this whole process, or whether it would automate that while creating the child AppleID.

I recently purchased 2 iPad2's for my children. I currently have my own apple id and have successfully setup 2 more for each child. I have setup one iPad with the one apple id, but the second iPad has me apple id on it. How can I change the apple id on th

Santa recently purchased 2 iPads for my kids.
I currently have my own apple id for my iphone.
I have created 2 aple ids for each child and succesfully setup one iPad with one of the new apple ids, but the other iPad has my own apple id.
Can I change the apple id on a device (iPad 2)? And how?

You sign off and sign in with the correct Apple ID.
See this tip and is still valid for IOS 6
iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

Different Layout within a webflow for one Portal Page

Hi All,
Can I set different layouts within one portal page journey depending on the hyperlink
I click on one of the portal page with in a webflow.
My requirements is such that if user clicks on one of the link on one of the portlet,
I want to show them the next page with different content in a different layout
with in same portal page journey.
Can anyone post the sample code to achieve this.
Thanks
Nitin

1 - you can not change the photo frame size if that is what you are asking
2 - you can enlarge the photo within the frame by selecting it and using the slider above the frame
3 - you can use a different page layout -- or even theme -- see Liz Castro's web site for examples of all available layouts for each theme -- http://www.lizcastro.com/iphotobookthemes/
LN

I want to create a new customized screen layout for responsive HTML5 output. I don't want to use the ones present in the gallery. What are the steps to do so?

I don't wish to use the ones already present in the gallery. They do not meet my requirements. Therefore, I want to create/design my own screen layout for the responsive HTML5 output. Please let me know the steps to do so. How to create a SLZ file, what is the code that I need to write. What are the components that I need to create to have a complete screen layout to be used in a responsive HTML5 output.

That would require inline formatting and I doubt that is an option.
If I am following you, the header area is full width of the screen so I cannot see how it can be broader, Perhaps you mean deeper? A screenshot might help here. The change would be made in the layout.css file.
That would be a change in the layout.css.
I suspect that too is controlled by the layout.css.
To make the changes you would have to go into the layout.css and modify that. As you will see, it is a very complex CSS and that is why I said creating you own layout is not easy. Hopefully when Willam is available again, he may be able to give you some more specific information.
I think Willam will confirm that if you cannot read the existing CSS to make those changes, then creating your own skin would be beyond your capabilities. Please do not take any offence there, I am simply emphasising how complex a task it is to create a skin from scratch. It's not one I would take on.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Accounts require credit cards. What is intended that one does with an ipad for a child?

Sorry, guys. The apple way is mindlessly coimplicated to me, I admit.
The ipad is required by school.
The child is 10.
She can't have an account, according to the rules.
She can't even download the free apps without an ID. <--- (HINT: This one is nuts,)
She can't have a credit card, the bank says "no".
Cunning plan: remove the credit card & leave her to free apps. The account won't let me remove the credit card.
OK, there are millions out there like this. I could not find any mention of the normal answer.
Anyone care to enlighten me?
Many thanks.
What are "categories" down there?

Where do you live?
If you have already created an Apple ID for your child and associated a credit card with the ID, by all means remove the credit card if that option is available for you. That would be by far the easiest thing to do and it would solve the whole issue for you.
You don't want to create a new ID if you don't have to - if you have already made purchase with the ID - those purchase will not transfer over to the new ID. If you downloaded free apps for the child, then creating a new ID would not necessarily be a bad thing because you can download the free apps again. Where it might get a little sticky is if your child has already created data of any kind in those apps, she would have to start all over again.
Do you have the option of removing the credit card in the settings? Have you seen this?
iTunes Store: Changing account information - Support - Apple

Would it be possible to have 2 shared resources, one local containing all common topics and pictures for several projects, and another one remote containing all topics and pictures for collaboration purposes

Hi,
I was wondering, now that I discovered the advantages of Resource Manger, if it would be possible to have 2 shared resources, one local with common topics and pictures for several projects, and another one, remote, containing the whole projects, i.e. topics and pictures, for collaboration purposes.
The local one I intend to use it for my purposes to have common items (topics & pictures) updated in all projects where they appear, and the remote one I intend to use it together with my remote colleagues that might want to do changes in the topics.
This would mean that the common topics and pictures would be present in both resources, the local one as well as the remote one.
Thank you.

Thank you for your fast answer Rick.
I was merely wondering if it would be possible w/o having to use other products outside RoboHelp.
We are already using svn for a lot of other purposes and we are using that for the RoboHelp projects as well, however I was wondering if it would not be possible to have RoboHelp take care of the RoboHelp projects, and with svn to take care of the other things in the company.
Eventually, if it would be possible, I would think to sync all the local projects with the remote projects, then sync the local project with the local shared resources, and at the end sync the rest of the projects with the local shared resources.

My aperture library has distorted for one of my projects. What can I do? (Details contained within)

My aperture library (Aperture 3 - with recent updates) has distorted for one of my projects. Originally, they were functional images, however, they are now essentially corrupt (composed of irregular colours/format). I have tried repairing library, generating thumbnails, and generating previews with no success.
Here's the story:
I was importing my images from a Lexar Pro 300x 32GB compactflash disc (from a Nikon D3s Camera). They were generating thumbnails fine and uploading fine. I erased the disc and ejected upon completion of the uploading process. As I started to view the images they all went corrupt in front of my eyes (as I was viewing them). It should be noted that I am uncertain if corrupt is the correct terminology.
Unfortunately, I can't seem to figure out how to upload a screenshot of the image, however, it looks like random colour streaks.
My computer specs are as follows:
24 inch iMac, 3.0GHz Intel Core 2 Duo, 4GB 1067 MHz DDR3 Ram. Mac OS X 10.6.7.
Any advice/suggestions would be highly appreciated!
If any further information is required I will be more than glad to supply it, as these pictures have an element of sentimental value to them.

It definitely sounds like the RAW files are corrupted. What you were seeing in Aperture at first was the JPG preview the camera imbeds in the RAW file. Aperture uses that at first to get an image up while it process the RAW file.
Because you deleted the images on the card already there is no way to know where the corruption took place. As Ernie wrote it is important to erase and format the card in the camera and definitely you don't want to erase until you're sure the image have been taken off the card and are OK.
All may not be lost however. There was a similar situation a while back see How to find corrupt masters I was able to access the preview and the resultant image was pretty good. If you really want or need to recover this images take a look at that thread and post back.
regards

Layout for one-child container

Similar Messages

Maybe you are looking for