Layouts for Double ALV
Dear Gurus ,
I made an ALV using Splitter and i have 2 Alv grids in my Screen . It works fine but i dont know how to set
a layout as default for that first alv and another layout as degault for the second layout .
Can i do this ?
Look my code ...
report aaa .
GS_TEST-VARI_SAVE = 'A'.
GS_TEST1-VARI_SAVE = 'A'.
CALL METHOD GR_ALVGRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT = LS_VARI
I_SAVE = GS_TEST-VARI_SAVE
I_DEFAULT = 'X' "GS_TEST-VARI_DEFAULT
IS_LAYOUT = GS_LAYOUT
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
CHANGING
IT_OUTTAB = ITAB[]
IT_FIELDCATALOG = GT_FIELDCAT
IT_SORT = LT_SORT
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4 .
IF SY-SUBRC <> 0.
*--Exception handling
ENDIF.
CALL METHOD GR_ALVGRID1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_VARIANT = LS_VARI1
I_SAVE = GS_TEST1-VARI_SAVE
I_DEFAULT = 'X'
IS_LAYOUT = GS_LAYOUT1
CHANGING
IT_OUTTAB = ITAB1[]
IT_FIELDCATALOG = GT_FIELDCAT1
IT_SORT = LT_SORT1
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
*--Exception handling
ENDIF.
Do you have any issue with the layout..?
Similar Messages
-
Default Layout for Multiple ALV displays
Hello All,
I have a requirement where I am displaying multiple ALV grid displays on different tabs of a screen.
Now I have to set a default layout for each of the grids separately as they have different fields.
Please let me know how to do it, I am using OO ALV display.
Thanks a lot
RuchiHi,
According to your grid called pass the variant name
gs_variant-report = sy-repid.
gs_variant-username = sy-uname.
gs_variant-variant = v_vari. " Your variant Name
call method grid1->set_table_for_first_display
exporting
is_layout = gs_layout
is_variant = gs_variant "<<<<<<<<<
i_save = 'A'
it_toolbar_excluding = i_exclude[]
changing
it_outtab = i_output[]
it_fieldcatalog = i_fieldcat[]
exceptions
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
others = 4.
a® -
Change Layout in Selection Screen for OO ALV-Grid
Hello everyone,
I got a problem regarding layouts for objectoriented ALV Grid. I want to make it possible that user can take the layout for ALV he wants to on the selection screen. So far thats no problem and it works. But there are some little problems which I do not know how to fix them. But first the facts:
(1) I got my parameter for layout
PARAMETER: p_vari TYPE disvariant-variant.
(2) I fill my global layout structure in initialization
INITIALIZATION.
* Variante vorbelegen
gs_variant-username = sy-uname.
gs_variant-report = sy-repid.
* Layout holen
CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = gs_variant
EXCEPTIONS
wrong_input = 1
not_found = 2
program_error = 3
OTHERS = 4.
IF sy-subrc = 0.
p_vari = gs_variant-variant.
ENDIF.
(3) I got my handling for F4-value help on variant parameter
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
CALL FUNCTION 'LVC_VARIANT_F4'
EXPORTING
is_variant = gs_variant
i_save = 'A'
IMPORTING
es_variant = gs_variant
EXCEPTIONS
not_found = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE text-m01 TYPE 'S'.
ELSE.
p_vari = gs_variant-variant.
ENDIF.
(4) I give back my parameters content into the variant structure at start of selection
START-OF-SELECTION.
gs_variant-username = sy-uname.
gs_variant-report = sy-repid.
gs_variant-variant = p_vari.
This works all fine but I got some problems when using default variants/layouts. For example I got a default variant only for me. When starting the selection screen it works fine that the default layout was written. It is displayed automatically in the variant parameter. But I want that if i I empty the content (blank it out) from my variant parameter, that report should start with "normal" layout how it was written in the report and NOT with default layout.
When I clear the gs_variant it works like I want it, but then the alv layout button looks like (without functions for layout), because I do not have the reference to my report.
So what to do? :-)
Regards
MichaelWow that was fast, works great, thanks :-)
I did not use this parameter in set table method but now I fill it dynamically.
Ok next problem, one step harder ;-)
Now I have one selection screen for one ALV-Grid, but four radio buttons which control with which data the ALV gets filled (four different fieldcats, data tables and so on). Each Grid got an own HANDLE so that the layouts can be separated in four categories.
Now I want that by changing the radio button the individual standard layout for the chosen alv grid is getting filled.
This works fine when using it in selection screen output.
AT SELECTION-SCREEN OUTPUT.
CLEAR gs_variant.
* Layout-Handles individuell für Klausel-Radiobuttons setzen
IF p_py IS NOT INITIAL.
gs_variant-username = sy-uname.
gs_variant-report = sy-repid.
gs_variant-handle = 'KLPY'.
ELSEIF p_rh IS NOT INITIAL.
gs_variant-username = sy-uname.
gs_variant-report = sy-repid.
gs_variant-handle = 'KLRH'.
ELSEIF p_aj IS NOT INITIAL.
gs_variant-username = sy-uname.
gs_variant-report = sy-repid.
gs_variant-handle = 'KLAJ'.
ELSEIF p_sr IS NOT INITIAL.
gs_variant-username = sy-uname.
gs_variant-report = sy-repid.
gs_variant-handle = 'KLSR'.
ENDIF.
* Layout holen
CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = gs_variant
EXCEPTIONS
wrong_input = 1
not_found = 2
program_error = 3
OTHERS = 4.
IF sy-subrc = 0.
p_vari = gs_variant-variant.
ELSE.
CLEAR p_vari.
ENDIF.
But unfortunately selection screen output is getting passed by EACH changing in the selection screen. This means when I try to clear the default layout in my parameter field, it gets refilled automatically with default layout. If I do a condition around the filling (only if not initial) the default value filling does not work fine in every case, e.g. when clearing the parameters field and then change the radiobutton -> then it does not get filled automatically. -
How can i pull alv layouts for selection screen ?
hello ,
i search way to give the user option to choose his layout,
i sow here examples that look good , but
all of tham talk about function :
"REUSE_ALV_VARIANT_DEFAULT_GET"
i run it in 'se37' and no data is pull ,
i know that there is layouts for my alv report ,
i use it like this in my report and in 'se37' :
CLEAR ls_variant.
ls_variant-report = sy-repid.
ls_variant-handle = 'LIST'.
MOVE ls_variant TO def_variante.
MOVE vari TO def_variante-variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = def_variante
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = def_variante-variant.
ENDIF.
thanksHi,
Try this.
INITIALIZATION.
Get Default display variant
PERFORM f200_display_default_variants.
Enable variant saving
data w_variant TYPE disvariant.
FORM f200_display_default_variants.
*initialize to default layout if one exist.
w_variant-report = sy-repid.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = w_variant
EXCEPTIONS
wrong_input = 1
not_found = 2
program_error = 3
OTHERS = 4.
IF sy-subrc EQ 0.
p_layout = w_variant-variant.
ENDIF.
ENDFORM.
Try this and reward points by clicking the star on the left of reply,if it helps. -
Hide Change Layout Button in ALV report o/p for MB52 Tcode
Hi,
Is it possible to Hide Change Layout Button in ALV output for Report MB52 using authoriztaion.
We have created a layout in which we are hiding some coloumns which the user should not see.
But if the change layout button is active then the user can add those coloumns to output.
Is this possible through authorizations. I want to avoid doing any chnages to the std sap program.
Thanks & Regards,
FawazCheck the object S_ALV_LAYO
-
DB Table for Layout Variant in ALV report
Please help me by providing the table name which will get an entry when we save Layout Variant in ALV(OO ALV grid) output.
Hi,
I have seen the table LTDX which is giving me the Variant names for a particular program. Hope this will help you.
Database table is LTDX
Database view is V_LTDX.
Regards,
Venaktesh -
Save layout option for Block Alv
Hi,
Small Question,
Is there any way to enable Save layout(Ctrl+F10) option for Block ALV?As i cannot see any option to do so with Reuse_*Block like i_save in Grid and For list ALVs...FM.And its by default it is Disable.
Any Hints?
Cheers,
Amit.That's what i already investigated(Small).
wanted Just to confirm.Anyways thanks.
@Gautham:I already found that link([And this also |/message/702997#702997 [original link is broken];) but thought After 2 and
half yrs Vijay found any solution and would land with any solution as always
Anyways Thanks Vijay And Gautham.
Cheers,
Amit. -
Problem with same layout (variant) for two ALV Grid and ALV Tree
Hello!
I have two docking containers on the screen. On the left i have cl_gui_alv_tree, on the right cl_salv_table.
When a user set a default layout for ALV Grid (or ALV Tree), raport starts and sets this layout in both objects (tree and grid).
How to avoid this?Hi,
Take Two radio buttons.
First radion button display the two containers in grid format,
second radio button display the two containers in tree format base on user selection.
CREATE OBJECT G_DOCING_CONTAINER
EXPORTING PARENT = G_CUSTOM_CONTAINER."G_CONTAINER.
DISPLAY THE DATA IN GRID FORMATA
CREATE OBJECT r_grid
EXPORTING
i_parent = G_DOCING_CONTAINER
CALL METHOD g_docing_container->set_width
EXPORTING
width = 1300.
DISPLAY THE GRID DATA IN SECOND CONTAINER
CREATE OBJECT r_grid1
EXPORTING
i_parent = G_DOCING_CONTAINER
CALL METHOD g_docing_container->set_width
EXPORTING
width = 1300.
OTHERWISE WE CAN DISPLAY THE TWO CONTAINERS DATA IN A GRID FORMAT
CREATE OBJECT g_tree
EXPORTING
parent = g_docing_container"g_custom_container
IF R1 = 'X'. "FOR GRID DISPLAY
CALL METHOD r_grid1->set_table_for_first_display
CALL METHOD r_grid2->set_table_for_first_display
ELSE.
************TREE DISPLAY
ENDIF.
regards,
muralii -
What is the constant name for Change layout Button in ALV Grid ABAP Objects
Dear All,
I have one query please help me.
what is the constant name for Change layout Button in ALV Grid ABAP Objects.
With Rgds,
BabuHalo Vinod,
The consant name is cl_gui_alv_grid=>mc_fc_current_variant.
Regards
Arshad -
Global ALV Layouts for Costing report
For T code S_P99_41000111 ie Analyse / compare material cost estimate , I want to create a global ALV layout .
When I am trying to create the layout option for user specific layout comes with tick greyed out .System does not allow to remove the tick so that I can create global layout .
With this option I cannot create a Global layout .
Can anybody help me with this so that I can create global layout .
I checked with security team & they gave me SAP_ALL authrisation but still it does not work .
Is it that SAP has allowed only user specific layouts for this T code S_P99_41000111 ie Analyse / compare material cost estimate .
Or is this authorisation issue .
Thanks
ManojHi Manoj,
Have you already tried configuration transaction OKN0? There is a
field called 'shared' in Layout Visibility. Do an F1 over this field for more info.
Regards,Declan -
How to set default layout for ALV grid ?
Dear all,
When execute ALV reports, the user customize the layout for their own purpose. But each time they run that report, they must choose again their layout. Is there any way to set the layout as default ?
Thank you very much,
Sylvecat.Hi,'
After you have created a layout just follow the steps listed below for making it as default layout:
1. Click (Save Layout).
2. Enter a name in the Save Layout field. The name must begin with a letter.
3. Type in a description for the layout in the Name field.
4. Select the Default Setting check box if you want this layout to be the default layout every time you run
the report.
5. Click (Continue).
Note: A warning message will appear if you are trying to save over an existing layout. Close the box by
selecting the X in the upper right hand corner or choose Yes to overwrite the layout.
Reward Points if found helpfull..
Cheers,
Chandra Sekhar. -
How to show the layout option for double-sided printing on Acrobat Pro X on Mac?
Adobe Acrobat Pro X version 10.0.0 print dialog does not show the option to select Layout for two-sided (double-sided) printing. How to fix it?
System: Mac OS X 10.6.6 on Mactel
Thanks.David,
Wow, it worked. Many thanks. This is what I did, following your directions to print PDF files as double-sided:
01-Command P & Click "Printer button".
02-Click Yes.
03-Click the Popup Arrow to display contents.
04-Select Two-sided "Long-Edge binding" or whatever needed and Click Print.
05-Click OK to Print.
What fooled me is that from Word (.doc) files the screen on step 3 and 4 show directly selecting a popup menu on the initial print window, whereas when printing PDF files it is required to go through steps 1-2-3 above.
Again, many thanks. You made my day!!! -
How to restrict the user to change ALV layout for Standard Report Output
Dear All,
How can i restict the Users to change Output layout of Standard ALV reports,
kindly suggest to solve the issue.
Regards,
Niranjan.GHi NIranjan,
In the ALV function module , the i_save can have the below paramater values.
You can add based on your requirement.
I_SAVE = SPACE Layouts cannot be saved.
I_SAVE = 'U' Only user-defined layouts can be saved.
I_SAVE = 'X' Only global layouts can be saved.
I_SAVE = 'A' Both user-defined and global layouts can be saved.
Check the Authorization Object - S_ALV_LAYO in SUIM (Objects by Complex Search)
Activity -23.
Edited by: Raj on Jul 13, 2010 3:05 PM -
Help needed for editable alv grid program
hi,
Can you please tell me how to set a update button in application toolbar of alv griv without suppressing it and how to write the code for that update button so that if I change my editable column data and press the update button my updated data should be stored in my database table.
the code what i wrote is:
TABLES: vbak,vbap.
TYPE-POOLS: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_final,
vbeln LIKE vbak-vbeln,
erdat LIKE vbak-erdat,
matnr LIKE vbap-matnr,
posnr LIKE vbap-posnr,
END OF t_final.
DATA: i_final TYPE STANDARD TABLE OF t_final INITIAL SIZE 0,
wa_final TYPE t_final.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE slis_layout_alv,
gd_repid LIKE sy-repid.
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
fieldcatalog-fieldname = 'VBELN'.
fieldcatalog-seltext_m = 'sales order'.
fieldcatalog-col_pos = 0.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'ERDAT'.
fieldcatalog-seltext_m = 'date'.
fieldcatalog-col_pos = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'material no.'.
fieldcatalog-col_pos = 2.
fieldcatalog-edit = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'POSNR'.
fieldcatalog-seltext_m = 'line item no.'.
fieldcatalog-col_pos = 3.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
FORM build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
ENDFORM. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
IT_EVENTS = GT_XEVENTS
i_save = 'X'
is_variant = z_template
TABLES
t_outtab = i_final
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT avbeln aerdat bmatnr bposnr FROM vbak AS a
INNER JOIN vbap AS b ON avbeln = bvbeln
INTO TABLE i_final WHERE avbeln = bvbeln.
ENDFORM. " DATA_RETRIEVAL
thanks in advance.hi sudhir,
thanks for ur reply.
after seeing the code u send to me i made changes to my program.but still when i click on update button,nothing is happening.can u please suggest me an idea.
TABLES: vbak,vbap.
TYPE-POOLS: slis. "ALV Declarations
TYPES: BEGIN OF t_final,
vbeln LIKE vbak-vbeln,
erdat LIKE vbak-erdat,
matnr LIKE vbap-matnr,
posnr LIKE vbap-posnr,
END OF t_final.
DATA: i_final TYPE STANDARD TABLE OF t_final WITH HEADER LINE,
wa_final TYPE t_final.
*DATA:i_final LIKE vbap OCCURS 0.
*DATA:wa_final LIKE vbap.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE slis_layout_alv,
gd_repid LIKE sy-repid.
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
fieldcatalog-fieldname = 'VBELN'.
fieldcatalog-seltext_m = 'sales order'.
fieldcatalog-col_pos = 0.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'ERDAT'.
fieldcatalog-seltext_m = 'date'.
fieldcatalog-col_pos = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'material no.'.
fieldcatalog-col_pos = 2.
fieldcatalog-edit = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'POSNR'.
fieldcatalog-seltext_m = 'line item no.'.
fieldcatalog-col_pos = 3.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
FORM build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
ENDFORM. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'GUI_STAT'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
it_events = it_events
i_save = 'X'
is_variant = z_template
TABLES
t_outtab = i_final
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT avbeln aerdat bmatnr bposnr FROM vbak AS a
INNER JOIN vbap AS b ON avbeln = bvbeln
INTO TABLE i_final WHERE avbeln = bvbeln.
ENDFORM. " DATA_RETRIEVAL
FORM GUI_STAT *
--> RT_EXTAB *
FORM gui_stat USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'UPDATE' EXCLUDING rt_extab.
ENDFORM.
FORM USER_COMMAND *
--> U_COMM *
--> RS_SELFIELD *
FORM user_command USING u_comm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
DATA:selfield TYPE slis_selfield.
CASE u_comm.
WHEN 'UPDATE'.
LOOP AT i_final ."into wa_final.
i_final-matnr = vbap-matnr.
update (vbap) from table i_final.
IF sy-subrc = 0.
MESSAGE s000(0) WITH 'records updated successfully'.
ENDIF.
ENDLOOP.
ENDCASE.
ENDFORM. -
SAVE Layout Option in ALV list Report
Hi Experts,
Is it possible to SAVE the layout option for Block ALV list Reports?
Thanks in Advance,
Sivak.Hi,
It is not possible to save layout in BLock ALV display but possible to change layout. There is no parameter to save. It is not possible to store the layout as it has several structure.
Thanks & Regards
Rocky
Maybe you are looking for
-
I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?
-
Problems with Std BI Content Extractor.
Hi Experts, We are using the std isu extractor 0FC_OP_01 to get the weekly and monthly dunning procedure and dunning levels for Business Partner's,When we use this extractor we are getting some BP's where the dunning has not been done at all,why it i
-
Getting Error Message on the MC84 transaction code MG144
The field is defined as a required field; it does not contain an entry ... Message no. MG144 ... We are unable to get past the initial screen of the t-c mc84. getting the above error. The product group's material type is PROD. The only reqd entry in
-
Sequence tag error while importing the SSL certificate into ".keystore" fil
I have created the ".keystore " file successfully and also imported the "root.cer". but while importing the SSL certificate it says like "keytool error: java.security.cert.CertificateException: IOException: Sequence ta g error" (I got the certificate
-
Connecting old imac to new macbook pro
I have a five year old imac that I use for photoshop work. My new macbook pro is so much faster processing big files, I can see the Imac's days are numbered. Can I use the monitor from the imac with the new Macbook? How would I connect the two? Th