Learning portal does not check Prerequisite qualifications while booking

Hi,
We recently upgraded to EP4 and saw an issue on the learning portal.
When there are pre-requisite qulaifications attached to a course type, learning portal should check if the Learner has the prerequisite qulaification in his/her qualification profile and indicate if booking could be done or not.
We notice that learning portal is bypassing the check and shows the message ' The results of the prerequisites check indicate that you can book this course.' and does the booking successfully.
Please help.
Jaya

Hi Jaya
Function module LSO_TRAININGTYPE_GET_DETAIL_C
This function module is responsible for performing the prerequisite checks and determining whether the booking is possible or not by setting the flag NO_BOOKING_POSSIBLE. You can find that after executing the above function module for the learner that whether the value is space for flag NO_BOOKING_POSSIBLE.
This way you can findout the reason for the behaviour.
Best Regards
Chetan

Similar Messages

GetSubwebsForCurrentUser does not check Root site

Hi,
I am trying to check if logged-in user has permissions to site. I have used the "getSubwebsForCurrentUser", but it does not check the Parent site and only checks for subsites. What am I missing?
My current code is as below:
function sharePointReady() {
clientContext = new SP.ClientContext.get_current();
web = clientContext.get_site().get_web();
_currentUser = clientContext.get_web().get_currentUser();
webCollection = web.getSubwebsForCurrentUser(null);
clientContext.load(webCollection);
clientContext.executeQueryAsync(Function.createDelegate(this, this.onWebsLoaded), Function.createDelegate(this, this.onQueryFailed));
function onWebsLoaded(sender, args) {
var webEnumerator = webCollection.getEnumerator();
while (webEnumerator.moveNext()) {
var web = webEnumerator.get_current();
olist = web.get_lists().getByTitle("Pages");
clientContext.load(olist);
clientContext.executeQueryAsync(onRequestListSucceeded, onRequestListFailed);
I have also tried the "web" variable as
web = clientContext.get_site().get_rootWeb();
How to fix this?
Thanks

Hi,
The SP.Web.getSubwebsForCurrentUser Method returns the collection of child sites of the current site.
http://msdn.microsoft.com/en-us/library/office/jj246242(v=office.15).aspx
If you want to check permission for current application scope, we can use
SP.Web.getUserEffectivePermissions Method to achieve it.
http://msdn.microsoft.com/en-us/library/office/jj850885(v=office.15).aspx
http://blog.fidelityfactory.com/2011/11/29/sharepoint-client-ecma-script-check-user-permissions/
More information:
http://sharepoint.stackexchange.com/questions/40082/js-jquery-check-if-on-root-web-of-root-sitecollection
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

I downloaded the latest version of Adobe Reader (11.0.07) and installed it. Message said install successful. But APEX learning software does a check to see if my system has Adobe Reader and it says I still need to install it. What's up? This has happened

I downloaded the latest version of Adobe Reader (11.0.07) and installed it. Message said install successful. But APEX learning software does a check to see if my system has Adobe Reader and it says I still need to install it. What's up? This has happened to me numerous times throughout the years. I need to get to the bottom of this problem. Thanks for your help.

You still don't give us the message you are receiving. My guess: you are trying to open a PDF in a browser that uses its own PDF viewer, not the Adobe Reader plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

IMPORT Target Portal does not match the Source Portal version

Hi,
Executing the import via the command line gives me the following error: Error: Target Portal does not match the Source Portal version
Cannot proceed with Import
Checking the output of the script tells me that the portal source has version 9.0.2.6 and the target 9.0.4.0.
Does this mean that there is no backwards compatibilty?
How should I continue from here?
Best Regards

Portal Export/Import utilities are designed only to work between Portals which are at the same version level.
For more information, please see this section in the Portal Export/Import FAQ for 9.0.2.6:
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/DEPLOY_PERFORM/9023_EXPORT_IMPORT_FAQ_0308.HTM#question_5
OracleAS Portal allows you to upgrade your existing content to the latest release of Portal.
What you need to do in your particular case is to upgrade your existing portal installation from 9.0.2.6 to 9.0.4 before using Portal Export/Import between your two portal instances.
Best Regards,
Harry

The apps on my iphone 4s does not show the x while wiggling. How do i delete an app?

The apps on my iphone 4s does not show the x while wiggling. How do i delete an app?

Check your restrictions.
Note that default apps cannot be deleted and thus will not have an x.

PO creation-ME21n-Why SAP does not check company code and Plant relation

Hi All,
Does someone know, why SAP does not check Plant and company code relation at the time of PO creation or how can we put validation between plant and company code at the time of PO creation.
<b>Example:</b> Suppose i have a company 0001 which is assinged to Plant 0001. when i am creating a PO with another company code 0002(Entering at header level-Org, data) and using Plant 0001 at line item level. SAP does not do this validation.
How can we put this check in place?
Thanks in advance.
Deepak

Hello Deepak,
There are three types of purchasing
- Company code specific :You need to assign company code to Pur organization
- Plant specific : You must assign plant to pur organization
- Cross company purchasing: No assignment between company code and pur organization.
In the case 3, the system will not check company code and plant relationship, but it will check plant and pur organization specific.
The following is the copy of sap help text:
You can assign a purchasing organization to one company code. This is company-specific purchasing.
You can assign a purchasing organization to no company code. This purchasing organization can then procure for all plants assigned to it, irrespective of the company code to which the plant belongs.
Since each plant must be assigned to a company code, the company code can be determined via the plant in each procurement transaction, even if the procuring purchasing organization is not assigned to a company code.
A purchasing organization must be assigned to one or more plants. This is plant-specific purchasing.
Now, check your company-code and purchase organization assignment.
Hope this helps.
Regards
Arif Mansuri

Common Services portal does not appear on the LMS 3.0 homepage

Hi,
I am encountering a problem on Ciscoworks LMS 3.0 wherein the Common Services portal does not appear on the homepage. This was after I tried to upgrade CW to LMS 3.2 but does not seem to work so I revert back to LMS 3.0. I even did a restore of the backup database but still no Common Services on the homepage.
How do i resolve this?
Appreaciate your help. Thanks in advance!

If you're not seeing the Common Services application portlet on the Functional Portal View, then you need to open a TAC service request to get the steps to manually re-register all of the installed applications from the command line.

Vl01n for so does not check batch management

batch management on the mm was not initially checked.
was checked after the material was put on the so.
unrestricted batch stock does exist
attempt to vl01n for that line creates a delivery but does not check batch management under material tab
what needs done to get the delivery to inherit the batch management check?

Dear Starz,
I guess according to SAP standard - The indicator cannot be changed if stocks exist in either the current period or in the previous period.
However the same would be applicable as soon as you post the new stock after changing the material master record.
Hope this helps...
Give points if useful...
Thanks,
Jignesh Mehta

Record does not "check in" after workflow is complete

Hi All,
I have built a very simple workflow as below
1. start step
2. process step
3. approve step
4. stop step
in the fourth step that is the stop step i have selected "check in" so that the record automatically check's in after the process is complete,
but the record does not check in and the data manager shows it as in workflow. please help
Thanks in Advance
Sharma.

Hello Abhishek,
Thanks for the reply.
The issue is resolved.
The user had the authorizations and the records were checked out as well.
i was missing the step of "Mark as approved" that was the reason for the records not to check in automatically.
Thanky you again.
Regards,
Sharma

AVK does not check includes

Hi, AVK does not check include jsp files <jsp:include
any clues?

Hi
This is a known issue with the AVK which we will be addressing in a future release

I am on a MAC Application. It has been rejected by following reason. This app does not check for the existence of a purchase receipt, which can prevent In-App Purchases from being correctly processed. We recommend implementing receipt validation to reso

I am on a MAC Application.
It has been rejected by following reason.
This app does not check for the existence of a purchase receipt, which can prevent In-App Purchases from being correctly processed.
We recommend implementing receipt validation to resolve this issue.
At a minimum, the app will need to check for the existence of an App Store receipt and exit at launch with a status of 173 if it does not exist.
Any help ?
Thanks in Advance.

I am on a MAC Application.
It has been rejected by following reason.
This app does not check for the existence of a purchase receipt, which can prevent In-App Purchases from being correctly processed.
We recommend implementing receipt validation to resolve this issue.
At a minimum, the app will need to check for the existence of an App Store receipt and exit at launch with a status of 173 if it does not exist.
Any help ?
Thanks in Advance.

262 Movement Type Issue - Does not check order

Hello,
A material is issued via a 261 to an order.
Say this order is now complete and we want to do a 262 back into stock SAP does not check whether or not the material had ever been issued to the order I entered in my 261.
Is there anyway we can have a 262 movement type check whether the material is in the order we enter?
N.B. I am aware we can use MBST, however this doesn't help for partial reversals.
E.G.
MIGO - 261
Material     123456789
Order2       123XYZ
Plant          1234
MIGO- 262
Material    123456789
Order2      RANDOMORDER
Plant        1234
The above scenario will post okay. We don't want it to as Order 2 has never had anything to do with material 123456789.
Any help is greatly appreciated.
James

Shakti,
You did not read my problem.
As I have said using MIGO to reverse the 261 does not check if the material was issued to that order. If I wanted to I can 262 back to an order that I've just found randomly....
My question was how can we get SAP to check whether the order we used has issued that material before (in the 261).

Iphone does not sync with Yahoo Address Book

Hi My iPhone does not sync with Yahoo Address book. iTunes comes back with an error
"iTunes could not sync with Yahoo Address Book.Because an Internet connection not available"
This make no sense as I am conected to the internet. iTunes can acess the iTunes Store without a problem. I can also access the Web.
Any ideas?

I ran into this problem just within the past couple of weeks. I found someting on another discussion group on the net about someone with the same problem. They said that it was because one of their notes was too long.
I looked at my notes and wouldn't you know it, I created a couple of extra long notes a couple of weeks ago! I deleted them and I am able to sync without errors again. I didn't know there was a size limit for a note on the iphone.
PS. I have an iPhone 3GS, iOS 5.1.1, iTunes 10.6.3.25

Portal check out record does not check in when MDM workflow is active

Hi Experts,
We are using portal as front end for the MDM material creation/update.
when a user tries to edit a material via portal, the record is checked out in mdm and once the record update is done and submitted that particular record will be checked in. this is normal process and automatic in nature till date.
However, we have created a simple workflow in mdm, we havent checked out records in start step of workflow.
So it normally executes without check out /in via MDM Workflow.
workflow triggerring action = record import, record update, record add.
when i edit the material vai data manager WF triggers fine and all is well.
However when i edit the material via portal, record is checked out (which is normal) and once record is submitted, the workflow in mdm is triggered successfully.
Workflow ends with all necessary syndication's and validations and ends successfully, But after this the record still remains as checked out? ???
ideally as mentioned above (in bold) once the user completes editing the record and submits it, the record should be checked in, but this is not happening!!!
Please let me know why is this happening.
Please help.
Regards
Eva

Hi Eva,
That is useful.
Analyzing this issue I came across SAP note 1740194-Record remains in exclusive lock after workflow is completed.This was an issue observed in SAP MDM 7.1 SP08.
It gives a workaround -
The workaround is:
The owner of updating has to click on the modified record in Data Manager after workflow completed. The original modified record will be unlocked.
Ofcourse,resolution would require an upgrade.
Thanks,
Ravi

IMovie 10.02 does not have program memory while exporting movie

Hi there,
I would appreciate any help to learn what iMovie does while exporting a movie I just made.
I am using the latest iMovie under OS Maverick and I have just created a project, added soundtracks and wanted to export the project
into a movie. The project is 31 minutes long and trying to export it as a file in HD quality, iTunes breakes off after a while and shows
the error message, that my system does not have any program memory anymore and that I have to shut down all used programs in order to
avoid problems with my computer.
Did anybody have had this kind of problem before? With the previous version, I made so many movies, partly almost an hour long and never had
any trouble in doing so. I could export as HD movie or into Quick Time but now the game has changed and I do not know exactly what I did wrong.
Why would there be not enough recources even though I upgraded my RAM to 8 GB.
Cheers
Zuse
PS
Sorry this might sound a bit funny, but my program language is German so I translated the German error message

Hello Zuse,
Thanks for your answer...
I also walked the forums about this and no solution. I contacted yesterday assitance call and the person does not see more where the problem is. I tried to repair the disk and permissions thereof, restart in safe mode and reinstall iMovie 10 but to no avail. He even advised me to reinstall Maverick or as you say, to use the old version of iMovie 9. I hope Apple will soon respond to this issue and provide an update because it is not normal at all.
Best regards!
Phil

Learning portal does not check Prerequisite qualifications while booking

Similar Messages

Maybe you are looking for