Leave Details screen coming as blank in ESS

Hi All,
We have implementing ESS with ECC 6.0 EHP6 on NWBC. When we try to run Leave Request on NWBC Portal, the calendar displays fine but when I expand the "Leave Details", it's showing blank.Any help would be highly Appreciated.

is it showing the other tabs Calendar, Team Calendar, Time Accounts, Leave Requests as you showed in screen shot
And only Leave Details is not showing which you marked in red box ?
It's looks like employee did some personalization to this leave request tab.
Follow below steps once and check it.
-> Logon with that user ID,
-> Open the Leave Request
-> Right click on page and click on Display hidden elements
-> In Displayed dialog do Reset all

Similar Messages

  • IPad screen backlit but blank

    I have struck a real problem with my iPad and I have tried everything to fix it.
    The problem is as follows:
    The screen is blank but is glowing with the backlight
    After pushing the home button, if I slide my finger across the bottom of the screen I can here the click of the iPad unlocking but I still see nothing.  I can even get music to play by double clicking the home button and sliding it right.
    If I hold the sleep/wake button down and then slide my finger across the area where the power off slider is, I get a brief glimpse of the power off slider, then a wiggly block of solid blue across the top of the screen (about 3-4mm high across the width of the whole screen).  I then get the usual power down spinning thing in the middle of the screen and the iPad powers off
    When I hold down the sleep/wake button again I get a split second of the solid white apple logo in the middle of the screen which then flashes off leaving the screen backlit but blank.
    iTunes detects the iPad as usual and gives no diagnostic sign that the iPad is in any way faulty
    I have tried the following:
    Powering up and down
    Complete reboot using the home and sleep/wake buttons together.  This results in the iPad closing down like in 3 above and when I switch it on again (like item 4 above) I get the same result as in 4.
    I have tried a complete restore of the iPad using iTunes.  This worked fine acording to iTunes but did not restore the screen to working order.
    HELP!!

    I have this same issue. My ipad charged overnight. When I came to turn it on in the morning, the screen was blank. If I turn it on and off I can see the backlight but the screen still shows nothing on it. I can hear a beep when I plug and unplug the power cord.  Have left it charging for longer but no luck. Have done a soft restart. When I plug in to itunes, it shows the ipad but when i click the ipad button, it disappears. Does not do anything.
    I really hope this isn't a hardware issue because this thing is not very old. (Well, old enough that warranty is no good but less than 2 years).
    Any advice would be appreciated.  Thank you!

  • Addition of a new field "Leave Details" in the LTA screen with dropdown val-ues from Infotype 2001 subtype ITEL. From the current calendar year in ESS

    Hi Experts,
    we are using portal 7.3 version,Our requirement  is addition
    of a new field “Leave Details” in the LTA screen with dropdown values from Infotype
    2001 subtype ITEL. From the current calendar year in ESS.The new field should
    be available only for the claim type LTA claim or claim against advance.
    please find the below screen shot and details.
    Current View
    Component: HRESS_CLMS_WD_EMCR
    Personalization: 4370750342A6297CC184E2B07FE6D13E
    Window: W_CLM_DYN_UI
    View: V_CLMS_DETAIL
    Application Component: PY-XX-RS
    Kindly help me how to add this field and in which method can i implement code.
    Thank you in advance
    Regards,
    Vanitha

    Hi Shankar Reddy,
    Business requirement is  the new field  should display the list entry in Infotype 2001 for the calendar year as selection option for employee. they would like to know ITEL subtype claim,
    Example.employee no: EE#9941
    As per screen shot you may see for EE#9941 there are 2 Leave requests.
    So in the leave details the selection drop down menu option or any other way  should be display 2 lines.
    Regards,
    Vanitha

  • ESS Leave request screen giving a critical Error in production server

    Friends,
    We are in a critical face of ESS implemetation.
    We are doing an ESS MSS implementation for country grouping 99.
    When we moved our changes to production server after succesful testing in quality, getting the following Critical error for Leave Request Screen.
    java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
         at java.util.ArrayList.RangeCheck(ArrayList.java:512)
         at java.util.ArrayList.get(ArrayList.java:329)
         at com.sap.aii.proxy.framework.core.JcoBaseList.get(JcoBaseList.java:272)
         at com.sap.aii.proxy.framework.core.AbstractList.get(AbstractList.java:230)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCList.get(DynamicRFCList.java:281)
         at com.sap.tc.webdynpro.progmodel.context.Node$ModelElementList.getElement(Node.java:2543)
         at com.sap.tc.webdynpro.progmodel.context.Node.getElementAtInternal(Node.java:621)
    Other areas like personal Info & who is who are working fine.
    Leave request was working fine in Development and Quality servers and it never worked in Production server.
    It worked fine with same config, with same master data and same employee & org structure in quality server.
    We tried the following things:
    1. Checked and confirmed the sequence of transports for configs and Developments to Quality and Production.
    Even compared the table level entries and ABAP codings B/n dev and Production. All are same.
    2. Moved the workflow changes to production and activated the same. No change found after that.
    3. Gave SAP all authorization in R/3 and full authorization from portal side as well.
    4. Assigned the userid to different employees and checked the masterdata of employees.
    5. Checked the note 1388426.Every thing mentioned in the note is there in the system.
    6. Verified Rule groups and WEBMO feature are correct and same as in quality.
    As our go live date is very near, request your help .Thanks in advance for your help.
    Regards,

    Customisation of Leave request is mising in your system, please check the rule group using PTARQ.

  • Ess wda: updating Iban for insert/copy/modify in bank detail screen for germany

    Hi,
    We are using standard detail screen HRESS_CC_PER_DTL_BANK_DE for Germany, We have observed that even if the user changes/updates/creates the new record without filling Iban field system will not throw any error which is correct as per V_T588MFPROPC as we have not made it mandatory. but we have an option to populate Iban using specific button in PA30, can we have the same functionality in ESS? Can we implement HRPAD00INFTYDB for this purpose? Is there any other option for this functionality?
    Thank you,
    Krishna kishore T.

    I can solve this issue implementing the BAdI HRPAD00INFTYDB
    Summary of configuration options in ESS Personal Information scenario
    Regards

  • ESS - Family Members Detail screen

    Hello,
    I am on EP 7,NW04s, ERP 05 and tring to modify the Family Members Detail screen .I have already hidden some of the fields and moved some up and down but the Previous and the Review button and too far down because of the space created by hiding the fields ,how can I move these buttons up, since I don't see them in the Detail View Layout....
    Also I want to put a validation on the review button to make the Social Security Number field as mandatory ...I think I have to modify the ess~per application ....
    Any help would be highly appreciated.

    Hello Subhash.
    If you look at this thread:
    Floor Point Manager (FPM)
    You will find some links to documents explaining how to modify an ESS application.
    It should explain to you in these documents, that validation is completed in R/3 NOT in the Web Dynpro application - so modification of the application is NOT required.
    I hope this helps.
    Cheers,
    Chris

  • Natwest Credit Card Services tell me that Firefox above 3.6 blanks out my "Pesonal Details" screen, are you aware of this?

    I wished to change my e-mail address at Natwest Card Services. Their Help says click on Personal Details then Manage Personal Details and then update the e-mail address displayed. This screen is completely blank on my system. I spoke to someone in Card Services On-Line Support and they said Firefox above level 3.6 will do this! Safari and IExplorer are OK. He knew of no plans to tell people of the problem or get it fixed. Perhaps they need leaning on.
    Can you help? Regards, Donald Hey (A happy Firefox user)

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Add checkbox on Banks Detail screen

    Hello,
    I am on EP7.0 ERP05 NW04s and want to add a checkbox on the ESS Banks Detail screen and make it mandatory . I have already added that at design time and to make it mandatory I added the code in the VcPerBankUSDetail.wdcontoller in the onEvent() method as:
         String event = fpm.getEventData().getEventName();
              if (event.equals(IFPM.EVENT_REVIEW))
                                       <code to display the message if the checkbox is not        checked >  }
    When I run it and don't check the box it displays me the message alone but there aer certain mandatory fields on the screen if I leave them blank also at the same time I don;t see a message for them ... I want to know wheres the code written for these mandatory fields although we make them as required in the backend R/3 system....
    Any help would be highly appreciated.

    Hello
    Thanks for the reply. But actually I am adding my own checkbox on the screen and want to make it mandatory rather than making the fields as mandatory ...
    Looking forward to your reply.

  • CRASH REPORT  Product:  Adobe Photoshop CC  Application running on:  Apple iMac 3.5GHz / Mavericks 10.9.2  Application crashes without warning. .  Symptom:  Drop down boxes go blank white  (I shot screen captures of blank drop down boxes) and application

    CRASH REPORT
    Product:  Adobe Photoshop CC
    Application running on:
    Apple iMac 3.5GHz late 2013 / Mavericks 10.9.2
    Application crashes without warning.  Symptom:  Drop down boxes go blank white  (I shot screen captures of blank drop down boxes) and application stops working, actions for appox. 10 minutes preceding crash are lost. Force Quit  required to quit unresponsive / frozen  application and then Restart of  Adobe Photoshop CC
    Crash Frequency:  Three time in this work day, 5.6.14  Once a day sporadically (approximately 10 times) in past two weeks.
    Other applications running at time of crashes:  Adobe Bridge - NOT effected.  Computer was on line with no browsers open.
    Otherwise computer continued to operate normally.
    I have been using Adobe Photoshop CC for approximately two months.

    Thanks, Chris,
    I hope that this is the solution.
    re:  "And a crash report without an actual crash report (a long, detailed text document available from the crash report dialog), is not all that useful" :
    I did in deed submit a homemade crash report.
    I would have submitted "an actual Crash Report "  and sooner, but:  When this event occurs. there are NO dialog boxes.  All frozen / blank.  No possibility of "actual crash report" !
    Thank you!

  • Total column not changed between header & detailed screen

    I have a report with header data contains contracts information and detailed data contains orders, debit credit memo related to the contracts.  I write the report using CL_SALV_TABLE to display  contract value, usage  in full ALV_GRID. When I double click on a contract line, it will go to the second screen to show all orders related to that contract.  The second screen with orders information will be in a screen on a container with all standard function ( Export list to Excel, Word format etc..), sort, total and sub total) and a push button to go back to first screen.
      The report works fine but when I am on the second screen, I total and sub total the amount on that screen in order to check with total value in header record and it total up correctly by currency.
    But when I go back to the first screen, select a different contract record,  double click on the line to get to the order info screen,  all order data display correctly except that the total column still show amount from the previous detailed screen.  If I select the column again and click the total, it will total correctly.   I did refresh the data in the screen before go back to first screen but it does not solve the problem.
    DOES ANYONE HAVE A SIMILAR SYMPTON LIKE THIS? 
    Thanks for your advice.
    On the order detailed screen, I create a container with screen 100 and write PAI, PBO like this:
    Screen 100:
    process before output.
      module status_0100.
      module load_data_to_control.   "Load usage data to screen
    process after input.
    module user_command_0100.
    module status_0100 output.
      set pf-status 'PF100'.
      set titlebar 'T100'.
    endmodule.  
    module load_data_to_control output.
      if gr_cont is not bound.
        create object gr_cont
          exporting
            container_name = 'CONTAINER_100'
          exceptions
            others         = 1.
        if  sy-subrc <> 0.
          message a052(zvn) with
          ' No container object found'.
        endif.
        try.
            cl_salv_table=>factory(
            exporting
         list_display   = list_display
              r_container = gr_cont
          container_name =
            importing
              r_salv_table = gr_alv_2
            changing
              t_table = gt_orders
          catch cx_salv_msg into gr_error.
        endtry.
        perform set_functions.        " Set all standard function in screen 100
        perform set_column_order using gr_alv_2.       "Set column format, display
        perform handle_events.                       "Register events for selection mode & user commands
         Display order screen 0100
        gr_alv_2->display( ).
      else.
        gr_alv_2->refresh( ).
    endif.
    module user_command_0100 input.
      data: wa_d type gt_dtab,
            ls_contract type vbeln,
            ls_order    type vbeln,
            ls_invoice  type vbeln,
            ls_belnr type belnr_d,
            ls_row   type char10.
      data: l_text type char128.
        case  sy-ucomm.
        when 'RETURN' or 'BACK' or 'EXIT' or 'CANCEL'.
    *... refresh the table in order to see the new data
          gr_alv_2->refresh( ).
          leave to screen 0.
        when others.
      endcase.
    endmodule.                 " USER_COMMAND_0100  INPUT

    Hi ,
    When you are using the CL_SALV_TABLE, what is the use of screen 100. Better populate the evnts table in CL_SALV_TABLE
    Cheers
    Pavan

  • Close frame attachments in shopping cart details screen

    Hi,
    i'm working in SRM rel 5.0 and i have this requirement.
    In detail screen of shopping cart document i need to see texts screen but not attachments screen.
    I see that this operation is managed by BBP_PDH_TEXT service and there is gs_ui_control_flags structure that have HIDE_ATT_SCREEN field, set to blank.
    I try, in debug, to change this value with 'X' and result is that no attachments screen is showed.
    How can i set this field? Perhaps in attribute of my service using SICF transaction?
    Thank's in advance.
    Best regards
    Maurizio Ortolani

    Hi,
       We had  a similar reqt.However we finally modified the ITS template in service BBP_PDH_TEXT for that.however this will disable the attachement feature for all the documents(SC,Bi etc..) as this is a common template being used across.
    The  commented statements are:
    `BBPGroupBoxBegin(LABEL_ATT_HEADER.label)`
    if ( (GV_MODE == "E") || (GV_MODE == "C") || (GV_INTERNAL_ATTACH_MODE == "X") )`
            <table><tr><td class="instruction" tabindex="0">`#LBL_ATT_INSTRUCTION`</td></tr></table>
            `BBPVSpace()`
            `TABLE(class="format")`
            `TR()`
            `TD(class="label")`<label for="`GS_SCR_TEXT-FILENAME.name`">`#LBL_ATT_DESCRIPTION`</label>
            `TD(class="data", nowrap="X")`<input `if (GV_ATT_EDIT_MODE != "")`disabled readonly `end`type="text" id="`GS_SCR_TEXT-FILENAME.name`" name="`GS_SCR_TEXT-FILENAME.name`" value="`GS_SCR_TEXT-FILENAME.value`" maxlength="64" size="30">
            `TR()``Lines()`
            `if (GV_CONFIG_DEACTIVATE_APPLET != "")`
                `TR()`
                `TD(class="label")` <label for="`GS_SCR_TEXT_FILEPATH.name`">`#LBL_ATT_PATH`</label>
                `TD(class="data", nowrap="X")`<input `if (GV_ATT_EDIT_MODE != "")`disabled readonly `end`type="FILE" id="`GS_SCR_TEXT-FILEPATH.name`" title="`#HELP_ATT_PATHINPUT`" name="`GS_SCR_TEXT-FILEPATH.name`" maxlength="255" size="30">
                `TR()``Lines()`
            `end`
            `if (GS_UI_CONTROL_FLAGS-SHOW_ATT_CATEGORY_SELECTION.value != "")`
                `TR()`
                `TD(class="label")`<label for="`GS_SCR_TEXT-FILENAME.name`">`#LBL_ATT_CATEGORY_SELECTION`</label>
                `TD(class="data", nowrap="X")`
                <input type="hidden" name="`GV_CATEGORY_SELECTED.name`" VALUE=" ">
                `if (GV_DISABLE_CATEGORY_SELECTION == "")`
                    `BBPCheckbox (GV_CATEGORY_SELECTED.name,"","X")`
                `else`
                    `BBPCheckbox (GV_CATEGORY_SELECTED.name,"","")`
                `end`
                `TR()``Lines()`
            `end`
            `endTABLE()`
            `BBPVSpace()`
            `BBPButtonBegin()`
                `if (GV_CONFIG_DEACTIVATE_APPLET != "")`
                    `if (GV_ATT_EDIT_MODE == "")`
                        `BBPButton("TEXT_ATT_ADD", BUTTON_ATT_ADD.label)`
                    `else`
                        `BBPDisabledButton(BUTTON_ATT_ADD.label)`
                    `end`
                `else`
                    `if (GV_ATT_EDIT_MODE == "")`
                    `BBPButton("", BUTTON_ATT_APPLET_ADD.label,"launchAppletCreate()", "")`  
                    `else`
                        `BBPDisabledButton(BUTTON_ATT_APPLET_ADD.label)`
                    `end`
                `end`
            `BBPButtonEnd()`
            `BBPVSpace()`
            `BBPVSpace()`
            `BBPVSpace()`
        `end`
    <table><tr><td class="instruction" tabindex="0">`#MSG_ATT_NO_ATTACHMENTS`</td></tr></table> 
    HTH.
    BR,
    Disha.
    Pls reward points for useful answers.

  • Show detailed screen for "WORK ITEMS"

    Hi
    We have configured POWL for showing Leave / Travel request. The requirement is ... we have to show detailed screen of respective item which are displaying under "Work Items", it's a combination of Leave / Travel etc.
    How do I show complete detail screen of selected item which are displaying under "Work Items "???
    Thanks

    Powl has multiples queries ie leave request and Timesheet you can all filter to see all tasks in one screen ALl the queries in the initial screen comes form POWL_COCKPIT

  • Country Specfic screen is not visible in ESS

    Hi,
    I have configured personal profile. Employee belong to Qatar country grouping and it should display country specfic screen like for IT0002,IT0021.
    But I am not able to see country specfic screen .
    Regards,
    Vijay

    For portal you have to configure/create Qatar specific detail screen.
    Have a look at this wiki:Exciting Enhacements to ESS Personal Information Profile in Enhancement pack 6
    Dummies Guide: Configuring Overview Screens in Personal Profile
    Summary of configuration options in ESS Personal Information scenario
    ESS On EhP6 - Personal Profile - BizCard Contro... | SCN

  • Book Binding with a PDF Cover Page - cover page coming in blank

    Hi All,
    I have sucessfully created a pdf book using PDFBookBinder. I'm getting a blank page when I try to use a Pdf as my cover sheet. My toc.xml looks like this....
    <?xml version="1.0" encoding="utf-8" ?> <outline xmlns="http://xmlns.oracle.com/oxp/book/">
    <title-page type="pdf">L:\badev\templates\quoting\temp\QUOTEFile10691\QUOTE10696.PDF</title-page>
    <toc-template>..\user_templates\BookBindingTemplates\toc-template.rtf</toc-template>
    <item>
    <title>112112</title>
    <content>L:\badev\templates\quoting\temp\QUOTEFile10691\QUOTE112112.PDF</content>
    <pagenum-template type="rtf">..\user_templates\BookBindingTemplates\pagenum.rtf</pagenum-template>
    </item>
    <item><title>1124343</title>
    <content>L:\badev\templates\quoting\temp\QUOTEFile10691\QUOTE1124343.PDF</content>
    <pagenum-template type="rtf">..\user_templates\BookBindingTemplates\pagenum.rtf</pagenum-template>
    </item>
    </outline>
    the File L:\badev\templates\quoting\temp\QUOTEFile10691\QUOTE10696.PDF is a one page pdf but for some reason it is coming in blank... Has anyone come accross this before?
    thanks,
    Matt

    Hi Matt,
    I'm also trying to use the PDF Book Binder API.
    I used the FOProcessor to convert a number of XSL files into PDF files and I'm nowing trying to use the PDFBookBinder to add a 'table of contents' to my PDFs.
    Where you able to dynamically create the TOC?
    And if so, I would be grateful if you could provide some detail on how it was done.
    P.S. Sorry to be answering your question with a question.
    Many Thanks
    Keith

  • Post-generating 3-level master-detail-detail screens

    Hi all,
    for a consulting project, I had to create several three-level master-detail screens using JHeadstart. For the JHS demo app, this would mean for example that a location page contained a list of departments at the location and underneath it a list of employees working at the currently selected department.
    From what I have learned so far using JHS, this is not supported by the wizards and should be done by post-generation changes. This forum has a few topics mentioning the problem and possible solutions, but most of the time just fragments of the complete solution/approach. As I had to create several of these 3-level detail screens, I tried to uniformly document them, providing the 7-step guide as outlined below. I only started working with JHS recently, so please let me know where I take a long way round or where my approach is not appropriate at all :o)
    NOTE1: Terminology-wise, for the example given above, I will call the departments the 2nd level detail and employees the 3rd level detail, while locations are the first level masters. I hope this is not too confusing ;o)
    NOTE2: the example code is not guaranteed to work with the JHSdemo. I just changed the names of variables and classes from my own application to the familiar entities of the demo.
    STEP 1: Generate plain MD screens for the first and second level entities (table-form) using the JHS application generator and make sure all generated features you want in your page are OK. Afterwards, switch off the UIX generation in your application structure file. If you want multiple entities at the third detail level,
    STEP 2: Add the functional contents of the generated 3rd level detail UIX page to the main master UIX page, right underneath the 2nd level detail-table but still inside the <header> entity of this 2nd level detail. (I'm not too sure whether this really matters, but at least the indentation looks nice). What I call "functional contents" is the <header> entity containing the 3rd level detail table.
    STEP 3: Edit the java file of the 3rd level view object, adding a variable storing the identifier (primary key) of the currently selected 2nd level detail row. If you haven't used the java file before, generate it by doubleclicking the view object and checking the generate view object box in the Java screen.
    private String $selectedDeptID;
    public void setSelectedDeptID(String id) {
    $selectedDeptID = id;
    STEP 4: Edit the java file of your application module (in the model layer) and add a method for updating the view objects search queries like the example below:
    public void updateEmployeeView(String deptID) {
    // fetch the view object instance
    EmployeeViewImpl view = (EmployeeViewImpl)this.getEmployeeView1();
    // register the currently selected departments ID
    view.setSelectedDeptID(deptID);
    // re-execute the view objects query
    view.executeQuery();
    // reset the selected ID
    view.setSelectedDeptID(null);
    STEP 5: Create a java class for handling the event when a user selects a different 2nd level detail row.
    package view;
    import javax.servlet.http.HttpServletRequest;
    import javax.servlet.http.HttpSession;
    import oracle.adf.controller.struts.actions.DataActionContext;
    import oracle.adf.model.BindingContext;
    import oracle.adf.model.bc4j.DCJboDataControl;
    import oracle.adf.model.binding.DCDataControl;
    import oracle.adf.model.binding.DCUtil;
    import oracle.cabo.servlet.BajaContext;
    import oracle.cabo.servlet.Page;
    import oracle.cabo.servlet.event.EventResult;
    import oracle.cabo.servlet.event.PageEvent;
    import oracle.cabo.servlet.ui.data.PageEventFlattenedDataSet;
    import oracle.cabo.ui.data.DataObject;
    import oracle.cabo.ui.data.DataSet;
    import oracle.cabo.ui.beans.table.SelectionUtils;
    import oracle.jbo.ApplicationModule;
    * USER-DEFINED EVENT-HANDLING CLASS
    * this class is triggered after the user selects another row in the Department
    * table/form in the Locations.uix screen. It derives the ID (pk) of the
    * selected row and launches the AppModule method to update the view objects
    * select queries with the selected DeptID.
    public class RowSelector
    * private variable holding the name of the DataControl module for this
    * Application Module
    private static final String DATACONTROLNAME = "AppModule" + "DataControl";
    * private variable holding the name of the table/form object in the uix page
    * from which we want to derive the selected row data.
    private static final String TABLEFORMNAME = "DepartmentsView2";
    * private variable holding the name of the form field holding the database
    * ID (pk) of a row in the ${TABLEFORMNAME} table/form
    private static final String IDFIELDNAME = "Dept_ID";
    * This method fetches the ID of the user-selected row in the DepartmentsView2
    * table/form in the Locations.uix form.
    * Afterwards, it fires the ApplicationModule method for updating the view objects
    public static EventResult doSelectionEvent(BajaContext bc, Page page, PageEvent event)
    try {
    // create a new FlattenedDataSet for the table name
    DataSet tableInputs = new PageEventFlattenedDataSet(event, TABLEFORMNAME);
    // fetch the UI table index from the DataSet (NOT the pk from the db)
    int index = SelectionUtils.getSelectedIndex(tableInputs);
    // fetch the DataObject representing all the input elements on the current table row.
    DataObject row = tableInputs.getItem(index);
    // fetch the value of the input field holding the ID (pk) of the selected department row
    Object value = row.selectValue(null, IDFIELDNAME);
    if (value != null) {
    // tell the AppModule to update the appropriate view object(s)
    getAppModuleImpl(bc.getServletRequest()).updateEmployeeView(value);
    // quick and dirty exception handling. not too many exceptions possible due to
    // hard-coded field/table/module names. anyway, taking no action at all is not
    // that bad an option for a demo ;o)
    } catch (Exception e)
    e.printStackTrace();
    return null;
    * method for fetching the active Application Module
    public static AppModuleImpl getAppModuleImpl(HttpServletRequest request)
    BindingContext ctx = DCUtil.getBindingContext(request);
    DCDataControl dc = ctx.findDataControl(DATACONTROLNAME);
    AppModuleImpl service = (AppModuleImpl)dc.getDataProvider();
    return service;
    STEP 6: Override the executeQueryForCollection method in your view object java file to make sure it uses the selected 2nd level detail rows ID for the bound variable specifying the 3rd level select query. Otherwise, the select query for the 3rd level detail set appears to use the ID of the first 2nd level detail row selected for the currently selected 1st level master. In the example below, no other bound variables are used in the view object, otherwise, the indexing might have to be adjusted.
    protected void executeQueryForCollection(Object qc, Object params[], int noUserParams) {
    if ($selectedDeptID != null) params[0] = $uur;
    super.executeQueryForCollection(qc, params, noUserParams);
    STEP 7: In the Locations.uix page, set a primaryClientAction for the radio select input in the 2nd level detail screen. This action should fire an event (fe 'userChoseDepartment') and refresh the 3rd level detail tables using the partial refresh options in the primaryClientAction dialog window. Afterwards, add an event handler to the bottom of your Locations.uix page, linking the event specified before to the doSelectionEvent in the RowSelector class.
    So, that's how it worked for me. I hope it does the same for you and please do post any comments or remarks if problems arise or simplifications are possible. The more remarks or bugs appear in the above code, the more the JHS team is hinted to enable auto-generated 3rd level detail screens :-D
    Cheers,
    benjamin

    Benjamin,
    Thank you for sharing your expreinces with us!
    A few remarks:
    1. With JHeadstart 10.1.2.1 you can generate unlimited master-detail levels in the same page when using UIX and table-layout for the detail groups This feature is implemented usin g UIX table detail disclosure: when you click on the "show" link in a row in of the level 2 detail table, you will see in the detail disclosure area the level 3 detail table.
    There is a screen shot of this feature in the JHeadstart Developers Guide for 10.1.2.1, chapter 3, section "Creating Table Pages". You can now download the dev guide from the JHeadstart Product Center:
    http://www.oracle.com/technology/consulting/9iservices/jheadstart.html
    2. You have a lot of steps related to synchronizing the level 3 ViewObject with the level 2 ViewObject. You can leave all this work to ADF Business Components, by adding the l;evel 3 ViewObject as a nested usage to the level 2 ViewObject in your application module data model.
    Ths would save you the work you aredoing in steps 3 to 6.
    Steven Davelaar,
    JHeadstart Team.

Maybe you are looking for