Left audio track disabled in premiere when importing to Audition... Any way to enable?

I'd ask in the Audition forum but I cnanot post there for some reason.
Anyway, I sent a range of clips from my work area to Audition. Made some edits on some clips and realized that I left a track disabled in premiere when I sent them to Audition. is there any way to enable this track now in Audition or am I going to have to scrap whatever I did so far and start a new import with that track enabled?

Source Patching http://forums.adobe.com/thread/1442800?tstart=0
-and a FAQ https://forums.adobe.com/message/6725752

Similar Messages

Audio Tracks are not linked when imported

I know I recorded in stereo so I don't understand why the audio pair I imported are not linked(2 mono tracks) in the timeline. Anyone know how to fix this?
Adam

There is no panning in stereo pairs. That's the way it works. You can't have separately panned tracks and still have them be stereo pairs. FCP works the same in this regard. If you captured in FCP as a stereo pair, the panning would be as you see it in FCE.

HT1212 for an iTouch 4 my young daughter thinks she remembers her password now but we have already exceeded the attempts and it says "iPod is disabled" connect to iTunes. Is there any way we can get the device to allow another attempt?

My 7 year old daughter has an iPod Touch 4 and she used the wrong password too many times. She thinks she remembers her password now but we have already exceeded the attempts and it says "iPod is disabled" connect to iTunes. Is there any way we can get the device to allow another attempt? We are traveling this week so don't have access to the serial number or the computer that was used to originally set up her iTouch. I don't even know what operating system it's on and can only see the home screen.

Restoring the iPod will do nothing to his iPhone.
When you restore it wipes the iPod clean no matter what computer you use.
The only plus to doing it form your home computer is if you have a backup stored there, then you can restore from the backup once it's done wiping.
If you are away form your home computer, go ahead and use the computer you have to restore it, then when you get home, you can restore form any backup you may find. You can use this to help you do that when you get there: http://support.apple.com/kb/ht1766

Any way to enable the hand tool when not zoomed in?

I am always using the hand tool (space) to pan around the canvas while I'm working, but it really bothers me that you can only use it when zoomed in. It assumes that when the canvas fits on the screen you don't need it, but I still have all the tool palettes overlapping the image. I don't like having to press tab to see behind them and it would be much more convenient if it didn't disable the hand tool. Is there any way to fix this? I'm using CS5.
Cheers.

Hello!
If you press F to be in one of the full screen modes, you should be able to pan around with the hand tool.
Pierre-Etienne

I have downloaded a Audio Book from Itunes Store, but rencently i have had to reinstall windows, is there any way to re-download the audio book from Itunes, i know that the audio books are one time downloads, but is there any way to get the audio book

I have downloaded a Audio Book from Itunes Store, but rencently i have had to reinstall windows, is there any way to re-download the audio book from Itunes, i know that the audio books are one time downloads, but is there any way to get the audio book back as i have already paid for it once and i would not like to pay for it twice.

If you haven't got a backup copy and if it's still in the store then you can try contacting iTunes support and see if they will grant you a re-download (there is no guarantee that they will) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

IPhone 5c voice dial cannot be disabled after software update. Is there any way around this?

iPhone 5c voice dial cannot be disabled after software update. Is there any way around this?

Hi! It seems you found a bug on iOS 7.1
To disable Voice dials try this, (I saw in an iPhone website here in Brazil):
1. Turn on Siri (settings > General > Siri)
2. go to (Settings >Passcode > Voice Dial) trust me, it appears now
3. disable Voice Dial
4. go back and disable Siri
hope this could help you!!

Disabling "move files when importing" with Adobe Premiere Elements

I want pictures/videos to stay in file location when importing them into Adobe Premiere Elements (I use Adobe organizer) as I also use the files in Adobe LIghtroom. The respective option cannot be disabled in the import dialogue.

idogu
Could you elaborate on what you are doing and the problems that you are running into?
What version of Premiere ELements and its Elements Organizer are you using and on what computer operating system is it running.
My problem in understanding your question involves the following thoughts.
When you import files into Premiere Elements or its Elements Organizer, the originals remain at the computer hard drive save location. The program has just thumbnails of the files, and those thumbnails need to trace back to the originals at the hard drive save location. Is the problem in a shortcoming of the Lightroom program?
We will be watching for clarification.
Thank you.
ATR

Audio track missing on timeline when I insert clip from source monitor

I have the following problem with PP CS6: my media contains two alternate mono tracks (one with the signal boosted as an insurance) and I have PP set up to treat them as two mono tracks, rather than one stereo track. Everything works fine when I drag media directly to the timeline from the project panel. But when I use the source monitor to select in and out points, and then insert the chosen clip into the timeline, only one of the two audio tracks appears on the timeline. Can anyone please explain how to make sure I get both tracks on the timeline via this route?
Thanks
DM

Hi Jim,
Thanks for replying. Unfortunately this doesn't apply to my case. I've set PP's default behaviour to import as dual mono in Edit\Preferences\Audio. This allows me to drag media from the project panel to the timeline and get two sediscrete mono channels. My problem is that when I go the source monitor route, any clip that I insert does not display two audio tracks on the timeline, just one. I have discovered I can switch the source channel from left to right, which to all intents and purposes fixes my problem, but I would like to maintain the option of getting both channels displayed separately on the timeline if possible.
Thanks
DM
Sent from my iPhone

Dropping an audio track onto a PSD file imported into Final Cut Express

I created a credits page for my video in Photoshop and then imported it into Final Cut Express (Version 1.0). I then duplicated part of an audio track from another sequence (My friend's father playing the organ), and dropped it onto the Photoshop credits sequence. It displayed and played nicely in Final Cut Express, but did not create an audio track which was visible within Final Cut Express. When I exported the sequence as a .mov file and then imported that into iDVD, it also displayed and played correctly in iDVD. But when I burned the DVD, there was no longer any audio with the credits. Any suggestions?
iMac Mac OS X (10.4.5)

Thanks so much for your response. I selected and copied tracks A1 and A2 from one sequence and then pasted them into the credits (Photoshop) sequence. No audio tracks appeared in the Photoshop sequence, but we could hear the audio when we played the Photoshop sequence.
There was video associated with the original organ track, and we did not lock off the video when we dropped it into the Timeline, although there didn't seem to be any problem with the video. We did not Mixdown the audio either, although no audio tracks were displayed in the Photoshop sequence. I will try both of those things and see if it makes a difference. Thanks again.
iMac Mac OS X (10.4.5)

Audio and sound not matching when importing

Hello - I've been importing footage from a miniDV from my Panasonic - the footage contains about 10 dance numbers. I had no problems, until I noticed that one of the dance numbers was a little 'off' in Final Cut. I checked the footage again, viewing it on the camera, and it was fine, so I imported again, and the dancing and the music was off even more, yet the video and audio tracks were lined up.
So then I tried importing into iMovie, and that worked just fine! So I had to make a full quality DV from that, and then re-import into FCP. How is it that it's fine on the the camera, but then goes 'off sync' when being imported into FCP, even though all of the other imported dances were fine? Any ideas/suggestions would be most helpful, thank you.

When you say off do you mean out of sync?
There's really a thousand things it could be and nearly impossible to tell with just a post. What version of FCP? What computer? What OS? What kind of drives are you using? What are you settings? How are you viewing? What capture settings did you use?
See lots of stuff. With DV, if it's out of sync changes are you have some kind of hardware issue going on as it doesn't take much computer power to edit DV.

Audio track of *.mp4 file after import to imovie 09 asynchronous

I've got a *.mp4 file of about 90 min. Picture and audio are synchronous.
After I imported the file to imovie 09 the picture is more and more delayed.
Why an how to fix?

I have that camera and I can't get it to work with iMovie '08 or iMovie '09. I'm seeing an empty event just like you.
How did you get it to work with iMovie '08?

IPad 1 disabled, not recognized when plugged in to any computer

I have an iPad 1 and I've been trying to get this fixed for about 2 days. It gives this message "iPad is disabled, try again in 23 million minutes" and whenever i plug it in to any computer it says "USB device not recognized". I also tried DFU mode and it still does it. Is there ANY way to restore the iPad ON the device. Or is there any way to get it fixed?

No, check this:
Media you've bought from the iTunes Store or songs you've imported from CDs are saved in your My Music folder by default. They won't be deleted by removing iTunes. Although it's highly unlikely that you'll lose any of your iTunes Library when following the steps below, first make sure that your iTunes library is backed up. See iTunes: Back up your iTunes library by copying to an external hard drive for more information.
copied from Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support

Importing new folder- any way to stop repeats?

i have a scandisc card that i occasionally download new music to from my phone. when i put it in the card reader and choose the option to import a new folder from the file menu, the songs that are already on itunes are put back on there. i dont want to keep having to go back and deleting songs from itunes because most of the time i forget which ones are duplicates. is there any way to stop duplicates from being imported? thanks in advance for your help!

i dont want to keep having to go back and deleting songs from itunes because most of the time i forget which ones are duplicates.
Why not delete the files from the scandisc card after you import them to iTunes?

Is there any way to enable editing when embedded in a browser?

When I embed Acrobat Pro in the browser it seems to run in a limited mode that prevents most document editing. It works fine when I access the document directly.
Is there any way I can enable full editing in Acrobat pro when it is browser-embedded?
Here's how it looks normally (excuse my choice of pdf)
When embedded it loses its menus, it loses the Tools link in the top right, and most items in the Comment functions.
It doubtless looses a lot more too.
My preference would be to have a simple (browser-side) call I could make to re-enable all these functions.
Note, I cannot add javascript to the pdfs. I can only act in the browser.
I'm starting to suspect I'll have to write a plugin, but I'd really rather avoid doing that if I can. It's been years since I've had to seriously develop in C++, and one glance at it reminds me the headache it can be.
For reference, browser embedded is key to my architecture, as the document will be being presented with a lot of ancillary information around it, and will need to save to a web-site, not to locally.
(If anyone has any experience with writing a save-back-to-a-website script I'd love to know how that can be done too.)

The plug-in has a limited number of features from the full product that are appropriate for web browsing, that is, viewing, filling in, printing, and submitting data to a scripted web page. Since the vast majority of users cannot save the downloaded file back to the Web server this feature was not included because one is "browsing" not creating nor editing.
Now if one is using a special web server like Microsoft's SahrePoint server it is possible to integrate the full Acrobat product to check out, lock form editing by others, for editing and then saving back to the SharePoint server and remove the lock. The reason for locking the file being edited is to prevent conflicts in the edited versions, sort of like locking Word or Excel files on a network server.
You might want to consider all the issues involved in editing networked files which could be changed by multiple users at any time and the needs of the users to have some control over the changes.
Do not over think this. You are using a "Browser" which only browses.

Video and audio goes out of sync when imported into Premiere

I have some videos ripped from some DVD that an acquaintance made, with an open source program called HandBrake, with the default "high profile" settings. When I play it both in VLC and in Quicktime, it plays just fine, but when I import it either in Premiere or in After effects, the video and audio goes out of sync (the video ran faster than the audio and when the video stops, the missing audio is trimmed).
Video info according to Premiere (in Spanish but you may get the meaning).
Ruta del archivo: [...].m4v
Tipo: Película MPEG
Tamaño de archivo: 667,7 MB
Tamaño de la imagen: 720 x 480
Profundidad en píxeles: 32
Velocidad de fotograma: 29,97
Formato de audio de origen: 48000 Hz - comprimido - Estéreo
Formato de audio del proyecto: 48000 Hz - Punto flotante de 32 bits - Estéreo
Duración total: 00:30:35:15
Velocidad media de datos: 372 KB / segundos
Proporción de píxeles: 0,8889

"HandBrake, these days, is almost entirely about H.264 video, aka MPEG-4 Part 10. HandBrake is migrating to quality-based encoding."
Hmmm. I use HC Encoder to make my DVDs because it's the only free encoder I've found with the much more professional Constant Q encoding option. But HC Encoder doesn't do HD sources for Blu-ray, so I've been wondering if I'd be stuck with the lame-*** consumer CBR and VBR options most encoders provide (including Adobe - hint, hint) when I eventually start working in HD. This is a very interesting program, Handbrake. I will have to check it out.

Left audio track disabled in premiere when importing to Audition... Any way to enable?

Similar Messages

Maybe you are looking for