Legal issues with exs 24 instruments

Are there any legal restrictions about sharing or selling home made EXS Instruments?

Data Stream Studio wrote:
You can't copyright a sine wave,
really...??? C'mon DSS, you didn't think that was serious...?
If I write a novel in .doc format, can I sell it?

Similar Messages

Does anyone have issues with the instrument library?

I've installed iLife 08 and then added all the jam packs. Now when I open GB the default track is an accordion (not a piano) and when adding loops to the timeline they take on a different instrument sound (e.g. drum loop sounds like raindrops, etc.)
I've searched high and low for similar problems and have found nothing that resembles this, I've cleared my preferences and repaired permissions and still nothing helps, I've contemplated reinstalling but I have no guarentee that that will help and I'm reluctant to invent the 3 hours it will take to do all that if it is all for nothing...
Bottom line is...is this really an issue with the instrument library and is there any way for me to fix this without reinstalling?

Just loaded the 6.0.2 update a few days ago. I was hoping it would fix the dropping of wifi where the 4g and 3g always kept. I have restored the router and I have even switched towers through AT&T's help, but to no avail. I still am dropped and sometimes it spins and spins looking to connect and then says, Cannot connect at this time. Sometimes it connects, and when the phone goes to sleep, it disconnects and then it is heck connecting again. I am very upset for I do not have unlimited data and my data has soared over 270 mg which I usually always kept way below 200 as being in my home most of the time. I am planning to take into AT& T store for a new one, just not happy with the wifi situation. It is sad that this cannot be fixed with an update. I saw earlier that some Iphone 5 made in China were the cuprits, and maybe I got one of those. I hope At&T and Apple are reading these dialogs. Please let me know if fixes are on the way!

Logic crashes when opening song with EXS instrument

I'm having problem opening a L7 song that contains and EXS instrument. Can't get song open before logic crashes.
The song loads except for the exs file (stock sample in default library). "Loading audio files" for the EXS gets to the last wav file of the patch then stops, the command-period to cancel doesn't work. Logic freezes and L7 "not responding" and have to force quit. Ironically, this EXS patch works in a new song when loaded.
I think i have tried everything with project manager scans and prefs: rescanned project manager, removed the scans, changed all the project manager pref settings ("search using pm database only", unselected "pm on program launch", etc)
Its not just this song but backups / previous versions. Trashed logic preferences, etc but no change. This song also uses ewqlso (loads fine) but i have reduced the buffer on that and there should not be any memory problems.
Thanks for your help.
Michael

Finally I got the free time to explin wht happened. Well, here is what happened to this particular corrupted song. I have heard rumours abound about OSX updates and EWQLxx but i have absolutely no proof of this just like I originally thought this was an EXS problem.
Anyways, I found a solution - With core audio disabled I emptied logic trash via key command, but did NOT reorganize song memory. That was the kicker for some strange reason.
So I think I figured out what some already know here but trying the three combinations (trash only, reorg only, or both together) may help solve similar issues.
Good luck, this one really blows under a tight deadline.

Legal issues with distributing Captivate projects

Are there any legal issues to consider is for example a
tutorial is created with Captivate and then that tutorial is sold
and distributed via Web and CD?

Hi niatross and welcome to our community!
If you are referring to anything "Legal" wise with regards to
what you produce using Captivate, there is nothing you have to do
as far as Adobe is concerned. They supply you the software and you
are totally free to do what you want with the output from that
software.
However, you could run up against a possible legal issue if
perhaps you used Captivate to record something that was copyrighted
and distributed that.
Make sense? I hope so.
Cheers... Rick

How to do multi-instrument with EXS instrument in Logic Express

Hello Logic Express Users,
I wonder if someone can help me. I can set up multi-instruments with Battery 2, and Kontakt 2, but I am battling to set up a multi-instrument when I am using the EXS with Logic Express. How do I assign the outputs to different outputs so that I can hear different instruments through different aux channels.
Or is it only possible with the EXS editor that comes with Logic Pro? Because if it is then it is weird why they make the EXS with Logic express a multi-instrument.
Thanks in advance for any help.

If you want to save an instrument patch together with plugins and so on, you should save it as a channel strip.
Use the channel strip menu at the top of the channel object. There is a defined directory for user channel strips, but you can create folders within it and organise your channel strip settings as you like.
These settings will show up in the channel strip menu, and the media browser too.

HT201065 Selling MBP with Mavericks - legal issues?

Any legal issues with selling my MacBook Pro with a clean install of Mavericks? As a preliminary to selling I have followed Apple's instructions by securely erasing my hard drive etc. I then downloaded a clean install of Mavericks. I was required to enter my Apple ID to download it. Does this mean that the copy of Mavericks will be attached to my Apple ID? Am I allowed to sell it on as is? Or am I supposed to leave it to the purchaser to download Mavericks using their own Apple ID?

Any and all software sold and distributed solely through the Mac App Store cannot be sold or transferred at all, unless it original came pre-installed on the machine.
The license is quite explicit about that - https://www.apple.com/legal/
section 3 covers transfers (this is from the link for OS X - Mavericks)
3. Transfer.
A. If you obtained the Apple Software preinstalled on Apple-branded hardware, you may make a one-time permanent transfer of all of your license rights to the Apple Software (in its original form as provided by Apple) to another party, provided that: the Apple Software is transferred together with your Apple-branded hardware; (ii) the transfer must include all of the Apple Software, including all its component parts, printed materials and this License; (iii) you do not retain any copies of the Apple Software, full or partial, including copies stored on a computer or other storage device; and (iv) the party receiving the Apple Software accepts the terms and conditions of this License. For purposes of this License, if Apple provides an update (e.g., version 10.9 to 10.9.1) to the Apple Software, the update is considered part of the Apple Software and may not be transferred separately from the pre-update version of the Apple
Software.
B. If you obtained your license to the Apple Software from the Mac App Store, it is not transferable. If you sell your Apple-branded hardware to a third party, you must remove the Apple Software from the Apple-branded hardware before doing so, and you may restore your system to the version of the Apple operating system software that originally came with your Apple hardware (the “Original Apple OS”) and permanently transfer the Original Apple OS together with your Apple hardware, provided that: the transfer must include all of the Original Apple OS, including all its component parts, printed materials and its license; (ii) you do not retain any copies of the Original Apple OS, full or partial, including copies stored on a computer or other storage device; and (iii) the party receiving the Original Apple OS reads and agrees to accept the terms and conditions of the Original Apple OS license.

Legal issues?

Why have there been no answers from Adobe in this forum for the past few weeks? Is Adobe backing away from this initiative? Have they run into legal issues with Apple regarding the developer licence or any other aspect of the iPhone application submission process?
There is a lot of speculation right now about CS5 dev for the iPhone in general, so it seems strange that Adobe is not interested in their developers questions unless there is some issue they are currently dealing with.

On the contrary, there has been no public response from Apple (negative or positive) and the work is continuing at full speed.
There are three reasons you haven't seen much activity from Adobe employees the last few weeks:
October 11-17 was an official "shut down" week for Adobe (North America) employees. With very few exceptions nobody was allowed to work that week.
The teams that are building this are working feverishly to fix bugs, improve performance, and finish features in time for the public beta later this year. (Keep in mind that for a large project such as Adobe builds, before a public release the code is locked down for several weeks of testing and final fixing, so feature work needs to be wrapped up before that time.)
There isn't any new public information since MAX. Many of the questions are either asking for information that is answered in the public articles and FAQs, or else is asking for information that we can't answer right now because it's not public information.
The best thing I can say is to keep working on planning and building your content using existing publicly available resources (Flash CS4 using Flash Player and AIR apis, as described in the various FAQs) and when the public beta is available there will be opportunity for you to ask more questions (and test things out for yourself).
Paul
Adobe AIR team

Duplicate exs instruments marked with a plus sign?

Hello,
I recently upgraded to Logic Pro x and performed a full-content install from the App Store. Afterwards, when looking through the exs instruments, I noticed that there were a fair amount of what looked like duplicate instruments installed, with one of the two including a "+" at the end of the file name to distinguish the one from the other. After auditioning several of the pairs, I feel as if they are the same exact instrument, though I am confused as to why two similar exs instruments would be installed . . .
Are they really dupes and why would they be a part of the installation package in the first place? Thank you!

I'm pretty sure the ones with + signs utilize articulation IDs. If you open the event list, in the view menu, you will see an option to show this column. It is how you switch between articulations (legato, pizzicato, etc. on strings for example). That used to be done with the mod wheel when applicable. Sometimes, but not always, there will also be a smart control mapped to this. Not all the + sign ones have an equivilant without the + sign (at least on my install).

EXS instruments fail to load

Hello, I am having problems loading all EXS instruments in Logic Pro. I have created a custom EXS instrument with my own samples, and even when i try to load basic things like the garage band "Hip-Hop Kit" drums, it takes at least 10 minutes to load the instruments. When loading my custom one, it almost always comes up with an error reading: Logical end-of-file reached during read operation ---- Result code = -39 "
Sometimes the EXS instruments, once finally loaded, won't even play their programmed samples. I don't know what the deal is, and am obviously missing something. I have tried the previous recommendation of using the project manager to expanded scan the system, then save data, and in preferences selecting the "Load Project Manager database on launch" box. Yet the issue doesn't change.
Should I tell Logic to copy EXS instruments into project folder? (when i created the project that was not selected). If so, how do i activate that option with an already-created project?
Any help is MUCH appreciated. thank you!

Thanks. I'm trying that. I should also say that my computer is connected to a 7TB Xsan Server, and though none of my files or scan paths are on it (it's actually an excluded scan path), i have a feeling it's looking for files through the entire server.

IPhone 4S issues with wi-fi and iMessage & Apple support

Against my better judgement and experience I bought an Apple iPhone 4S when it was released. I should have remembered the extensive pain I experienced with Apple's so-called "support" when I had iPod/iTunes issues but I bought into the promise and the hype by Apple's marketing. I'm still wondering why this product includes only 90 days of support if Apple is so confident in it's reliability. So I was having increasingly frequent problems with my iPhone connecting or remaining connected to known strong and good wi-fi connections. It would arbitrarily disconnect from my wi-fi and go to a 3G connection which of course causes me to use data on my Verizon data plan. Usually I didn't notice the change in connection until I was waiting far too long for the requested information to show up. As you can imagine, that issue will push me towards exceeding my data plan quckly and thus cost me more money on my Verizon bill. Not acceptable.
Then in the last two weeks I started having an issue with iMessage/IM in being able to reply to messages. I could read them, I could open and close the app, but once I tapped in the field to type my reply it froze. I could not type anything. I could close and reopen the app, same problem again.
So I set up a call with Apple's glorious support system for which I had only a few days left on my extensive 90 day support term. The lady that called me was friendly and fun to talk to. No issues there. She had me initiate a backup after checking a few things. Because the backup was going to take about 20 minutes, she asked if she could call me back. I was fine with that, no need to make small talk for that amount of time. I got a call back but it was from a guy at another location. This concerned me but he said he had all the notes so I was hopeful. He advised me that if there was some corrupt SW on my iPhone, restoring would only put the problem back on my phone. I'm a sales guy in the IT industry, so I bought that. He said he was going to set my phone back to "new" as if I just bought it, then would restore all my apps, settings, contacts etc back to my phone. It was a big leap of faith for me, but I went along because they are supposed to be the experts. After spending close to an hour on the phone with this guy, who was also polite and fun to talk to, he has me start the restore process and waited on the phone with me for a while. The process was taking quite a while, I think around 30 in total so about 20 min into the process he has me stop the restoring session and tells me I can restart it later. He wants to check that my wi-fi is working. It was, so he asked if there was anything else I needed. I said just to put my phone back to the way it was with my apps, contacts, music etc. He told me that would complete when I finished the restore. I had to go to my company's office for the afternoon and spent much of that time resetting everything that was on my phone to how it was before. I noticed that the iPhone had pulled every single contact from my Outlook db on my personal computer (where iTunes resides) and all the contacts that I had set up on my iPhone were gone unless they were also in my Outlook. The really aggravating part of this issue is that I have about 800 contacts in my Outlook, many of which are people I don't want or need to have on my phone. The contacts I had entered on my iPhone over the past almost 3 months were the people I call or call me. All that data appears to be gone. I have since restored twice and the same thing occurs, everything is set back to "new" status and nothing is the way it was. I am now so angry I could crush this phone with a hammer and switch to the competition. Neither of the very nice people who "helped" me told me I would lose any information. In fact, both assured me my phone would be back to the same setup I had previous to their help.
I ask you folks at Apple, what is the use of backup if it doesn't back up AND restore all the information? We have a saying in my business, "you can back up the entire world, but how well can you restore?". I don't know if some step was missed along the way, or I initiated a restore from an incorrect target, but I am not a happy customer. Add to that the fact that I'm locked into a 2 year contract on this thing, and have had issues with poor support before and I'm pretty angry. I've gone into my local Apple store to ask a question about my iPhone's capability. It was a simple question that required only a "yes" or "no" answer and I would have been fine either way. What I got from the pasted on smile Apple associate was a sales pitch on the product I was showing her! Continously smiling and telling me the world is beautiful does not answer questions or resolve issues. I was eager to buy an iPad in the near future but with the pain I seem to get everytime I buy an Apple product, that purchase is never going to happen. You can block me here, blacklist me or whatever you like to do to keep people from reading negative comments about Apple, but I will be posting this same story elsewhere as well. For the amount of profit you make from these devices, I expect much better service and much less aggravation.
Sincerely,
Rick S.

The nice thing about owning this overpriced POS is that Apple not only doesn't support it, but also doesn't want to hear about anything negative regarding it. So I spoke to the so-called "support" people at Apple who successfully screwed up my contacts beyond repair. I got a nice email from Apple asking me to rate the support I got. I was actually civil and described the issue tactfully. What do I get in return? Nothing. Not a damned thing!! You're luck you've got me by the short hairs on a 2 year contract but I'm still tempted to throw this POS through the front window of the nearest Apple store!! Not only will I be replacing this phone with a competitive product but I won't be buying anymore Apple crap. I guess when you con 27 million people into believing your rhetoric and sales lies, you don't have to care whether some customers get screwed or not. I'll be going back to Verizon and threatening legal action if they don't take this electronic dung heap back but I'm sure the teams of lawyers Apple and Verizon have on staff have insured that I have no rights in this matter and you're free to screw me anytime you please. Sad. I used to love Apple as a company and your products. Now you're just another Microsoft with more trendy looking junk. I've had it with you. If any of your executives are brave enough to talk to me, please contact me at your convenience.

There seems to be an issue with opendns free servers

''(Locked. Not a support question. See bold text for reasons of locking -m)''
This is more of a "I found it" than a question as this seems to be an issue with the opendns free DNS servers related to certain torrent sites and the duckduckgo search engine. However any thoughts are appreciated.
While looking for a solution I followed troubleshooting steps found here to no avail regarding cookies (I'm accepting them from everyone including third party cookies and their dogs), clearing cookies (do that all the time as a matter of routine, did it again several times), clearing the cache (did that, got the T-shirt, now I'll never be naked) and checked the about:config setting (I forget which one but it was already set to 20, the default)
Note that I can eliminate these issues completely by setting my DNS to "automatic" however I've been using opendns free DNS servers for years and have changed nothing except when troubleshooting this issue.
The following is a detailed description. It can be confusing if you don't read it carefully:
I had this happen on several torrent sites however I can get through on others but when I choose the .torrent link I get the same problem on most like at: http://kickass.to/movies/genre/news/ and the KAT mirrors... on KAT I can get to the page but the .torrent links are at http://torcache.net and I am unable to get those .torrents at all. (getting the "the page isn't redirecting properly" Firefox error message and the very long http://guidetest.a.id.opendns.com/?url=guidetest%2E (goes on forever) URL
I'll post a few links that I've tried (just to see if they work) below.
http://www.torrentz.eu/ - can't see the page at all, I get the "the page isn't redirecting properly" Firefox error message and it redirects to the URL: http://guidetest.a.id.opendns.com/?url=g...Ecom%(goes on for something like a couple of hundred characters)
Same issue with several other torrent sites...
lazypirate.net I can't get through at all - same issue
http://extratorrent.cc/ - no problem with pages or .torrents
http://isohunt.to/ - again no problem with pages or .torrents
Particular torrents I get the:"the page isn't redirecting properly" Firefox error message and it redirects to the URL: guidetest.a.id.opendns.com/?url=guidetest%2Ea%2Eid (blah blah forever) are:
http://thetorrent.org/A5F7D7D92D8CDE2576...9B.torrent : (getting the "the page isn't redirecting properly" Firefox error message and the very long http://guidetest.a.id.opendns.com/?url=guidetest%2E (goes on forver) URL
I can go on to list individual .torrents but I think you get the idea...
I've had this issue with more than a few torrents over the last couple of days and can't remember them all but further checking does seem like it's either particular torrent sites I can't access at all or on sites I can access but store their .torrent files on either torcache.net or thetorrent.org so there seems to be mixed issues, being able to see some pages but not get .torrent files from those sites if they're stored somewhere else.
On duckduckgo I get the "this site is untrusted" error.
Again, when I abandon the opendns DNS servers I've been using for years and go to "automatic" both of these issues disappear with no other changes. and I've done that several times just to verify the problem and even confirmed that the opendns server addresses are correct, which they are the same ones I've used for years.
I've emailed opendns and described the issue and they are completely confused and tell me "it must be your settings"
'''Although this doesn't seem to be a Firefox or a Windows issue, I'm using FF 28.0 on win XP Pro SP3, legal OEM copy, Pentium D, 3.66 GHz, and 4 GB or Ram (3.65 GB of RAM recognized by XP, this is normal)'''
'''Again, this issue only happens with the opendns free DNS servers I've been using for years and vanishes completely when I choose the automatic DNS setting and has only been happening a few days.'''
I have screenshots of the errors and thought there was a way to post them here but I don't see that.
The error on torrent sites is "The page isn't redirecting properly. FF has detected that the server is redirecting the request for this address in a way that will never complete. (and goes on to say blah blah cookies blah blah that I've checked and rechecked)
The error on duckduckgo is "This Connection is Untrusted. You have asked Firefox to connect securely to duckduckgo.com, but we can't confirm that your connection is secure." blah blah (you probably know the rest). I expect that I could add an exception but again the problem doesn't happen when using automatic DNS server detection.
I have no problems on other sites that I see.

Here are the screenshots for what it's worth.
Not sure why I can't post them in the original post. 
Mod edit: See [https://bugzilla.mozilla.org/show_bug.cgi?id=718813 bug 718813]
'''Again, when I set my DNS server to automatically detect the servers both problems disappear and I have no issues at all.'''
IMO opendns is either doing this on purpose (unlikely) or they're under some sort of attack/being used to attack the specific torrent sites although I'm open to other explanations. I believe using the automatic setting for DNS is using my own ISP's DNS servers (which again, work fine... but still...)
I'd rather not use Google's public DNS servers as Google is to commercial these days and I think there's potential privacy issues.
'''Again I have changed the setting for DNS servers back and forth several times to duplicate/verify the issue(s)... and the issues only happen with the opendns servers.'''

I have found an issue with MS13-098 which causes systems to be renamed to MINWINPC

I have found an issue with MS13-098 which causes systems to be renamed to MINWINPC. The issue has been reported in Japanese by Microsoft. The translation is:
Phenomenon
In Windows Server 2008 or Windows Vista, you might not be able to log an error appears to apply the new update the following programs, if you try to log on after the restart. • MS12-024 (KB2653956)
• MS13-098 (KB2893294)
Error message displayed is as follows.
Incorrect password or user name
Back to the top | feedback
Collapse image Cause
This behavior occurs when you apply the update KB2653956 in the state of some data is damaged following registry key, or does not exist.
HKEY_LOCAL_MACHINE \ SCHEMA \ wcm :/ / Microsoft-Windows-CoreOS? ...
Any string will contain the part of the ... Note:. Also, make sure to load the SystemRoot% \ system32 \ SMI \ Store \ Machine \ SCHEMA.DAT file% if the HKEY_LOCAL_MACHINE \ SCHEMA does not exist.
When you apply the update of KB2653956 in the state where the registry key is not present, the value of the following registry is changed to MINWINPC, logon will not be able to.
• HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ActiveComputerName
• HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ComputerName
Back to the top | feedback
Collapse image Solution
If this occurs, change to the correct computer name the value of the ComputerName registry and ActiveComputerName start in safe mode, has been mentioned above, and then restart.
Back to the top | feedback
Collapse image Workaround
To prevent this phenomenon occurs, you download and run the System Update Readiness Tool from the following KB.
http://support.microsoft.com/kb/947821
By performing the system update Preparation tool registry that is described in Section Symptoms are repaired.
If the repair is made, starting with log Recreated missing key as the following WinDir% \ Logs \ CBS \ CheckSUR.log file% is recorded.
Recreated missing key:? Wcm :/ / Microsoft-Windows-CoreOS ... \ metadata \ elements \ ComputerName
In addition, regardless of the presence or absence of entry damaged Microsoft-Windows-CoreOS, you can set the value of the ComputerName key in this tool. For this reason, the following log is recorded in the CheckSUR.log.
Recreated value: @ _type.
Recreated value: @ dataOnly.
Recreated value: @ default.
Recreated value: @ description.
Recreated value: @ displayName.
Recreated value: @ handler.
Recreated value: @ legacyName.
Recreated value: @ legacyType.
Recreated value: @ migrate.
Recreated value: @ scope.
Recreated value: @ xsd: type.
Back to the top | feedback
Note: This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. It contains information in response to emerging issues are listed. As a result of the speed of information provided may be
typographical errors are included in the article, you might be revised at any time without prior notice. For other considerations, and use conditions
Please refer to.
Back to the top | feedback
Collapse image Property
December 11, 2013 - Revision: - Last Review: 2901584: 4.0 Document Number
This document that was written about products for.
• Windows Vista Business
• Windows Vista Business 64-bit edition
• Windows Vista Enterprise
• Windows Vista Enterprise 64-bit edition
• Windows Vista Home Basic
• Windows Vista Home Basic 64-bit edition
• Windows Vista Home Premium
• Windows Vista Home Premium 64-bit edition
• Windows Vista Starter
• Windows Vista Ultimate
• Windows Vista Ultimate 64-bit edition
• Windows Server 2008 Datacenter
• Windows Server 2008 Datacenter without Hyper-V
• Windows Server 2008 Enterprise
• Windows Server 2008 Enterprise without Hyper-V
• Windows Server 2008 for Itanium-Based Systems
• Windows Server 2008 Foundation
• Windows Server 2008 Standard
• Windows Server 2008 Standard without Hyper-V
• Windows Web Server 2008
• Windows HPC Server 2008
• Windows Essential Business Server 2008
We are having the issue on hundreds of systems and I am rolling out the readiness tool mentioned above to prevent other systems from being affected. In the mean time I have stopped deploying MS13-098 and am hoping Microsoft will go ahead and let all
of their customers know about the problem instead of just one country. Hopefully the original bulletin will be updated with this known issue.

PPoj,
Apple has offered replacement or pro-rated refunds in the US as a settlement of a class action lawsuit, not because of pride in their design-centric approach to their products. If you seek a similar replacement/refund program in India, then the odds are pretty good that you’d need a similar legal approach with which to convince Apple to offer a similar program there. If you’re unwilling to wait for such an event, then you can purchase a replacement power cable now, and hope for a pro-rated refund at some point in the future.

Issues with multiple firewire devices

Over the past few months, I've noticed issues when daisy chaining FW devices to my MBP (a 15" purchased September 2009. Specs are posted in the signature). It often seems that a third device causes connectivity issues. 2 will always work fine (any 2) and of course 1 device is a no-brainer. But as soon as I add a 3rd to the chain, stuff happens, Specifics:
This usually involves 2 hard drives and an audio interface.
The audio interface has a FW 400 input. The hard drives have 800 and 400, among other options.
Since I can always successfully run any 2 devices without issues, I have to eliminate the drives, cables, or the new audio interface as a problem (??)
I'm not aware of any storm or electrical surge to have done damage. Anything is possible, of course.
For my day-2-day work, I need both drives and the audio interface up and running.
Data always seems fine.
The main question is are there any known issues with the FW port/chip on these MBP's. But also, how can I test the FW port integrity?
Thanks in advance for any advice.

When the controller is first plugged in (via usb), a logic popup finds and asks if i want to use this device in logic.
Logic is asking you if you want to use that audio device as Logic's audio driver.
This is entirely independent of MIDI - any MIDI sent to OSX from whatever MIDI device will show up in Logic.
Is there a way in Logic to turn off reading midi for certain devices. I dont want to shut down midi completely as I also use a midi keyboard which works without issues.
Yes, you want to filter out the MIDI coming from that particular port. Open the environment window, go to the Click&Ports layer, and New -> Instrument, call it "Null" or something and make sure it's set to no output port in that object's inspector parameters.
Now, cable the desired MIDI port on the "physical input" object that corresponds to your device, to this "Null" instrument. Now, all MIDI data coming into Logic on that port will be effectively nuked, and will not reach the rest of Logic and interfere with other things.
Of course, you'll need to save this setup as a template or song in order to use it in the future.

Issue with paper type when remote printing

Hello
we have an issue with printing from redirected printer
on the local machine Windows 8.1 i have a printer installed and when i try to print from a remote pc to my installed printer on my local pc the paper type is replaced.
on the local printer it was set to letter but on the remote the redirected printer is set to legal.
i try to switch it to letter but it was not kept it switch back to legal.
any adviced will be good ?
Thanks

Hi,
We may try to test this and will get back to you as soon as we get outcome.
In addition, here is a Print/Fax forum below you may get more insights from print experts:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverprint&filter=alltypes&sort=lastpostdesc
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Issue with remote printing

Hello
we have an issue with printing from redirected printer
on the local machine Windows 8.1 i have a printer installed and when i try to print from a remote pc to my installed printer on my local pc the paper type is replaced.
on the local printer it was set to letter but on the remote the redirected printer is set to legal.
i try to switch it to letter but it was not kept it switch back to legal.
any adviced will be good ?
Thanks

Hi,
What's the operating system of remote PC we log onto? Here, I am not sure that this can help but we can give a try by disabling the following policy setting:
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Printer Redirection\Use Remote Desktop Easy Print printer driver first
Regarding this point, the following KB article can be referred to for more information.
The client printer may print the documents by using an incorrect paper size if the "Use Remote Desktop Easy Print printer driver first" policy is enabled
https://support.microsoft.com/en-us/kb/980056
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Legal issues with exs 24 instruments

Similar Messages

Maybe you are looking for