Lenght of project in nb

Hi all,
I'm not sure to be in correct forum (so sorry..), but I've a question for Netbeans users. Does anybody know if it is possible (existing tool or plugin) to know total number of lines of an entire, already existing, project?
Project contain package, and i would know total lines with and without jar imported..
Thanks a lot,
-nicola

The thing is, that animation is working in HTML, the javascript code has to be ok. But when i have more frames, longer then 80sec, then the HTML is just blank page. When i set it again with lower number of frames, it works again. I am viewing it locally... or... I dont need to do it online, but is truth when i am offline the HTML export doesn´t work and it makes blank page again. Could you help me, where is setting for locally/online exporting/viewing?

Similar Messages

Looping real instruments - follow time of project option not selectable

Hi,
I've recorded a real instrument track, now I would like to make it loopable and safe it to the instruments library.
So, I trimmed it to the desired lenght and wanted to export it.
Now my problem:
the export option "follow time and tonality" is not selectable irrespective whether or not I checked the box at the bottom in the edit track window that should allow the loop for following the project parameters.
Does anyone know what could be the problem?
THANKS

It seems that it is crucial to adjust the region one wants to loop to an integer bar lenght, then recheck the box, follow time and tonality in the track window. I have noticed that although following the same proceedure sometimes it not possible to export the such a loop as one that follows the tempo of the song (unable to check box, in the loop-export dialogue). To me the reason is not completely clear, often it requires some trial and error, import loop in new project to export it as a tempo following one.

Is it possible to replace all assets in a project?

Hi
I have just finished the first DVD of a series consisting of 26 menus (18 buttons each, except for the main menu which has 25 buttons), 75 playlists, 323 video files, 24 audio files, 33 timelines (up to 45 chapters each). In every case a video file corresponds to just one chapter. Total 3,4 Gb more or less.
I had a lot of problems (general error, out of memory, sorry an abnormal condition has occurred...) during the DVD build process, and I finally had to start from scratch and create new versions every few steps to get this thing to build. Took a long time as I had to save as, then build to see if it worked, then close the file, then reopen and start a new version, ended up with 27 versions.
I have to prepare the rest of the DVDs, which will have exactly the same structure, although some of the videos may be slightly different in length (just a few seconds difference).
Is it possible at all just to rename all the assets to avoid re authoring the whole thing, and then review only the timelines including the different lenghted videos?
Thanks a lot

Graciela Caro,
When faced with a similar Project (ended up being a set of 18 DVD-5's with the same structure), I built a test Project to work out the details and finally got everything as I wanted, then burned a DVD RW.
I took the "test" and built a "template" with all of my Bins/Folders, Menus (knowing that I'd change these, as each DVD would be similar, but unique) and Imported just the Assets that would be common, like the First Play and a lead-in to the Main Menu. This I Saved to a master folder. For each individual DVD, I opened that "template" Project and did a Save_As into the appropriate folder for that piece of the Project, i.e. Barry_DVDs_01. For each of these, I Imported the Assets unique to that phase of the overall Project. Then, it was just a matter of creating the individual Playlists, etc., and linking. I helped myself by doing a Flowchart in Illustrator. For each phase, I swapped out the Menus, and altered the Links to suit. This gave me the full schematic of each sub-Project. I used these for myself in the Linking process, and also used them for the client to sign off on. He knew exactly what was going to be on each DVD in the set, and how the navigation would work. In Illustrator, I kept things in their Layers, so it was easy to make changes for each sub-Project. Any changes after the Flowchart had been approved cost more $. The client knew this and could see exactly what was happening at every step.
Though it's some additional work, if you have the Project (your "test") finialized, and know that you'll be duplicating it many times, just with different Assets, I'd urge you to adopt something similar. It should not take long to re-create a blank Project with all of the common aspects in it. Use this as a "template," and do a Save_As of it, to begin each phase. It keeps the XML Links that have to be re-done to a minimum, 'cause you're starting with a semi-clean slate for each one.
As Jbowden points out, just replacing the Assets can lead to problems. I did not even want to go the Replace Assets command route, to keep the Project file from possibly getting corrupted by overwriting the Links, even using the correct, approved process.
Just make sure to place a copy of your "template" Project well away from the area that your working in on your I/O system. Make it Read Only, for safe-keeping, in case you forget to do the Save_As. I actually made two copies - one onto a DVD just for safety.
Good luck,
Hunt

Scripting the lenght of a page (for smooth scrolling in DPS)

Hi, folks
I am quite a layman in this scripting world but I have a question that I would really need answered. It's not so much a question of 'how' but one of 'is this possible with scripting'?
We want to set up a system where the pages would be automatically created with XML input from a short set of templates so that they end as indesign documents in a given folder.
We have a very clear idea now on how to do that. But now, I have to take a design decission: Should I try using "one-page articles" with pages of variable lengt depending on the size of the body text frame? (so that they make afterwards smooth scrolling in Adobe DPS)?
What refrains me from doing that is that body text will be variable in size and lenght. So... I cannot predetermine which length must have the main frame in the pages and, consequently, I cannot predetermine the lenght of the pages (expressed as top margin + body frame length + bottom margin).
The question for scripting: Is it possible that you may run a script that does this?
- Text is input into the main body text frame via XML import.
- Frame is resized so that it fits with content (no more, no less).
- Page is then resized so that (expressed as top margin + body frame length + bottom margin) it keeps designed proportions.
I hope what I want is clear enough, because that is the doubt that is stopping me from trying the one long page winding way. Any idea, please?
Thanks a lot
Gustavo (Posting from Madrid)

Hi Gustavo,
yes you can accomplish what you are describing with InDesign scripting.
Instead of creating a smooth scrolling page you could even create a frame with scrollable
content on the template an fill the scrollable content with text.
That way you will not have empty spots on the page.
That sounds like an exiting project which combines InDesign, DPS and scripting skills.
Stefan

Creating projects with more that one exported sequences from different FCP

I am creating a compilation DVD containing 6 different FCP projects. I exported all the projects using the same settings
MPEG-2 6.2Mbps 1-pass 4:3.m2v and .aiff files.
They each burn and play just fine when I use just one in a DVD Studio project. The problem comes when I put them on one track using chapter markers to mark the beginning of each new clip on the track.
It looks as though it is working until I try to play it in the simulator. I can hear the audio, but the picture does not view on any of the clips other than the the first one in the track. If I go back into the viewer and click on a portion of the clip, it will play both audio and video, but once it moves to the next clip (through a chapter marker) the video will not view until I click on the track again.
What have I done wrong? I am a bit of a newby with FCP and DVD Studio.
MacBook Pro Mac OS X (10.4.8) DVD Studio 4.1.0
MacBook Pro Mac OS X (10.4.8)
MacBook Pro Mac OS X (10.4.8)

Hi:
Same problem in this thread:
http://discussions.apple.com/thread.jspa?threadID=741368
It seems to be a "kind of bug". If you build and test your project in your hard drive everything plays fine. In another thread (that cannot find right now to link!) someone mention that the problem is the difference in the lenght of audio and video aafter encoding each sequence.
But as I told you at least my projects builds fine.
Hope it helps !
Alberto

Why Are My Bounced Audio Projects So Large in Size?

I have been bouncing completed audio projects for many months now in Logic Express 9 and they have always been reasonably sized MP3 files (10 MBs or less). The music I have been bouncing is relatively short in length. The files I have most recently bounced are no different in song length or form than any other previous project, yet the file size of each new MP3 is at least 10 times as large as what I'm used to. I have not adjusted any settings in the Bounce screen so, needless to say, I'm a bit confused as to why the MP3s have jumped in size. Anybody have any ideas?

Hi, I don't know if you have checked this, but just in case.
When you bounce audio projects you have to set the beginning and the end . If you don't the lenght of the mp3 can be very long.
Hope it helps!!!

IPhoto slideshow in iDVD project

I have some questions on problems creating a iDVD project of an iPhoto slideshow:
1. Is it possible (how ?) to create buttons for scene selections, as in iMovie ?
My project contains one continuous slideshow (942 still pictures) which I want to divide in
chapters relating to the varuous trips I made during one travel.
If not in iDVD: has this breaking up of a single iPhoto slideshow be done in iMovie or iPhoto itself,
or by way of creating a 'Magic iDVD' ?
2. Can audio be imported with different sound clips ?
As for now my audio clip (3 min) repeats itself endlessly till the end of the project (48 min), and I
want to use various songs out of my iTunes library.
3. For a slideshow with its speed matched to the lenght of an audio clip, 10 seconds seems to be
the longest duration for one single picture. Can this be lengthened ?.
In my actual project, 10 seconds for each picture in combination with a cross dissolve seems
to work too fast in my slideshow.
I expected this transition to be added to their duration; instead it seems to take seconds away
from the linked stills.
If all these problems can't be adressed in iDVD 6: is iDVD 8 the better option ?

To get the versatility that you want, and because this is a complex project for iPhoto, I suggest that you bring iMovie into the work flow.
I would create a separate iPhoto slideshow for each segment of your trip (eg. Italy, France, etc.)
Then export each slideshow to your desktop as a High Quality Quicktime movie. There will be no loss of quality. Then create an iMovie project, and drag each Quicktime movie into the project. You can add your audio in iMovie, as well as chapter markers. Then save and close, and drag the iMovie icon (the one with the star on it) into an iDVD project. Just drag it to the edge of the iDVD display menu so it doesn't fall into a drop zone. Then save your iDVD project as a Disk Image (an option from the File menu). This will take awhile because all the encoding will be done as if you were burning a disk. To play the disk image, double click on its icon, and then open the DVD Player app on your Mac. Make sure it plays O.K. Then close it, and open the Utilities/Disk Utility app on your Mac. If it's not already in there, drag your disk image icon into the left side display panel in the Disk Utility Window. Then insert a DVD-R disk into your drive and hit Burn. The burning process will be fairly quick because all the encoding already was done when you created the disk image.
As far as I am aware, you cannot extend the length of a photo in an iPhoto slideshow beyond what the settings will allow you to do. If you want to go beyond that, I would suggest creating your slideshow in iMovie where you can display the photos for as long a duration as you want. In my opinion, 10 seconds duration for a photo is way too long, particularly when you have 942 still pictures. Whew! I would keep it to 5 seconds at most. You can always use the remote pause button of your DVD player if you want to display to your viewers a particular photo for a longer time.
In an iPhoto slide show you can import different audio with different sound clips. Go to iTunes and make up an album of the songs that you want to play in your slide show. Then, when you select your music from the media pane in your iPhoto slide show, select the album that you created, and the slide show will play those songs in succession as your slide show runs.
The cross dissolve transition will shorten the display duration of the photo on each side of it, and thus shorten the overall display time of the slideshow. The overlap transition will not shorten the overall time display.
I hope this helps. Good luck with your project/.

Help!! The lenght of my quicktime file is different when I import it to fcp

So I have a project on fcp. 23.98 fps. total length 1 hour.. I exported a quicktime file at 'current frame rate'. THe outputted quicktime shows that the length is 1hour and 5 seconds. When I import this quicktime back into final cut - the lenght goes back to 1 hour.
Can someone plese tell me what is happening???

OK, so i figured it has something to do with the frame rate. I am editing in 23.98. when i edit in 29.97 then the quicktime file has same length. BUT... why should qt length change when i output from a 23.98 version AND the qt file is playing at 23.98?

Open Project and it needs to be re rendered

Win 7, Premier Pro CS4
5 tracks of Video
5 tracks of Audio
Time line lenght 44 min.
Problem: With the project rendered (all Green, NO red) and saved, project closed and Premier shut down, When it is opened again some segments only a few are red and need to be re rendered.
Q: Why is this happening???

Geoff,
That takes the externals and the networked drives out of the mix. They often contribute to such issues.
Thanks, two down, and one to go!
Good luck,
Hunt

Can't publish or export project-error code -108.

I created a project with videos, photos, music etc. The lenght might be a bit long (1h.17) but I did not find any information about a specific limit...When I tried to publish in 1080 hd or any other resolution or even export to quick time after about 30 min it would fail I got the message with error code -108. I have enough space on the hard disk...is there a way to fix it?

I forgot to say that I tried to reboot my mac book Pro with no sucess...

Showing GL, PA Period error when create new Project

Hi All,
I am facing an Issue while creating a Project through Template, though I have opened PA Periods and GL Periods of current, but still showing following error
"Cannot copy a budget to a period which is out of the range of system defined periods (e.g. PA period or GL period)"
Please help me in resolving this.
Regads
Madhu

Hi
I assume your template budget has periods within the range dates of the template project, between the start date and the completion date of the project.
When you copy the template to create a new project, enter the start date of the new project as the start date of the template. If your project start date is different from the template start date, the system will try to more the end date, and may also try to move the budget periods, so those will keep the same lenght, but starting from the new project start date. In those case you might be creating budgets in other periods then the original template budget.
Dina

Every time FCPX starts I have to render my project

I experience a really awful problem...
Every time I start my project I have to re-render the whole timeline.
I'm using the latest version of everything, also from the CoreMelt plug-in I'm using in this project.
As long as the project is short this doesn't happen, but after 2 minutes project lenght this happens all the time.
I have 64 GB RAM so this should not be the problem.
The plugin developer stated that this is a FCPX background rendering problem, but when I switch it off it's not getting better.
Then I have to render it manually, before I can edit/watch the project.
I have one of the fastest MaPro's available 12 core and I work on a SSD-RAID0 with highest Data-Rates...
So what is the problem and how to solve this??

wolfgang,
does this happen if you delete the coremelt fx from the clips ?
I have never had this problem. But I did demo the coremelt plugs and they gave me nothing but H++++
Not saying they are the culprit... But if FCPx was at fault I think we'd be hearing more of it...
Try creating a fresh project with no core melt of other effects in it but with the same clips.. Then render the timeline. Quit FCPx and relaunch and see if the problem persists...
If it does
Try deleting
/Users/YourFolder/Library/Caches/ EVERYTHING FCPx
/Users/YourFolder/Library/Preferences/ EVERYTHING FCPx
Reboot with shift held.. Then log it.. Then reboot normally

Multiclip project out of synch

Newbie...
I've done a 4 camera multiclip music project and 1 of my clips has gone out of sych with the audio (the other 3 are good)....how do I fix this?

Hi
As to the problem - This occured for me and a 1 hour / two Camera project
In this case - I had a true problem as one Camera didn't match the other.
My small hand held Camera was - Sencitive to movement of Camera - The big one was not
Switching set-up to let small Camera be stationary and big one Hand held made futher propjects
totally OK and in Sync over full 62 minutes. (miniDV tape lenght used)
The troubling project was best off with Audio from both Cameras - nobody commented upon it.
Yours Bengt W

"Replace with after effects composition" on Premiere gives me a empty AE project...

I'm selecting and right clicking footage from my Premiere timeline, clicking "Replace with after effects composition", and getting a black, empty screen on After Effects.. There is no footage under Project in AE, and the footage I selected on Premiere also became black. .
I'm using the CS5 version of both programs, and video clips from my 7D... What could be wrong?

I am also having this problem. It worked before but now it isn't I did change to Windows 8 recently but I don't know why that would cause it. Here are some pictures to show
Premiere Pro CC and AE CC both updated today, both restared today. You can see the footage is there and PP is reading it. It is an MPEG2 file. easy.
Right Click on replace with after effect comp
AE opens up and I create a new project
Comp is blank. No footage. Lenght is correct though.
If I tab back to Premiere the footage is gone and shows only black.
Please help.

Freeze clips after sending RED-Project to Color

I have a RED project, edited in Final Cut. there are some RED reference files consist from 2 RED clips. the clips in project are linked with the 4k reference files (-F.mov an the end) but in the file container there are 2 or 3 RED files the reference links to. in final cut no problem. but if I send the project to COLOR the clips freeze between the switch from RED-file 1 to 2. the only way I found to edit the red file direct to color. What can I do to make a good transfer from Final Cut to Color with mutiple RED files? Thanx!

Thank you for the information. it was very tricky to finish the project. The clips named ..._F.mov with Freezes in Color sent from Final Cut will be send back to Final Cut with the Freezes. So I made a new Video Track in Color and imported the original Red-Files (they have no Freezes anymore) and edited the lenght. I corrected them but Color doesn't send the new Video Track and the new material back to Final Cut... So in Final Cut I imported the in Color rendered .mov-files from the new material and this worked finally... I'll take a look at the colorfixer...

Lenght of project in nb

Similar Messages

Maybe you are looking for