Lenovo G510 won't start when battery is on and it's fully charged

Hi there. I have my Lenovo g510 i5 notebook for 10 months, and my battery is wrong. I haven't used it on battery too much, but when I used it, I empty all of it and then charged it when it's turned down. Couple of days ago, the battery was empty I put it to charge, the orange light appears that it's charging, and day after when I put the battery on the notebook won't start, but with the battery and adapter start normally and show that the battery is 100% (fully charged). Why I can't use it on battery? Please help me.

Hi Kocevski_91,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not starting with battery in your G510 laptop.
Please remove the battery and connect only adapter and check for the issue, also try to perform a power drain by removing all the external devices connected to the devices and shutdown the system, now remove battery and adapter, press and hold the power button for 30 seconds, connect battery and adapter and check for the issue.
If still the issue persist, perform battery gauge reset, go to power manager select advance mode and select battery tab and click on battery maintenance under this option click perform under battery gauge option. Please perform and reply with results.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Lenovo s10e won't start on battery power alone

Hi,
I have the following problem with my Lenovo s10e netbook:
On battery power, press the power button, I see a flash on the screen, the blue power led turns on, then off after a few seconds, I can hear a sound from inside the device but it does not turn on.
If I connect the power adapter with the battery connected the device starts up with no problem.
If the battery is not connected and I only use the power adapter I have no problem starting the device.
I tried using a different battery and still have the same issue.
Do you have any idea what is causing this?

hi icelexy,
Welcome to the Lenovo Forums.
The unit looks like it's not getting enough power on the battery. If you're using the original 6 cell, 4400 mAh. 11.1 V battery, there's most likely a problem on the charging mechanism at the back part of the unit.
Have you already contacted lenovo to report the issue? (they'll most likely ask you to send the unit in for diagnosis)
Regards,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Sattelite L300D won't start on battery, needs adapter to start

Hi!
I've have my Sattelite L300D since April last year, and suddenly my laptop won't start when the net adapter is not connected. Battery says 100% (Fully loaded) when I'm connected, and started the system.
Anyone any idea why my laptop's not starting on battery alone?
I already updated the BIOS to version 1.50 but that does not change a thing!
(My warranty is till April, so should I send it in for repair?)
Thanks a lot in advance!

Hi!
In your case I would go to a local ASP (authorized service provider) and let check your laptop from these technicians.
I think its a hardware problem, maybe the battery is faulty and so you can only start the laptop with AC/DC adapter.
Bye

Ram Preview won't start when Render multiple frames simultaneously enabled

Hello everyone,
I have an issue with rendering AE CC , with my new PC computer in Windows 8.1 pro 64 bit
As the title says , my issue is Ram Preview won't start when Render multiple frames simultaneously enabled. Actually it starts after 8 -30 seconds depending of project complexity and the rendering is slower and skipping frames !
12 cores with 2 GB ram each.
When I disable the option of multiple frames simultaneously render starts ok.
but it's really very sad that I can't use this beast of CPU in full potential. its an new intel i7 5930K , 32 Ram DDR4 2.4 Ghz
Any advice and options would be much appreciated.
Thanks,
Vonzar.
Setup:
Windows 8.1 Pro 64 bit
CPU : Intel Core i7 5930K 3.5 GHz Six Core Socket 2011-3 140W Box
GPU : nVidia GeForce GTX 970 4GB DDR5 PCI-E
RAM : 32GB DDR4 Non ECC CL16 2400MHz Crucial Ballistix Sport
Mother board : Asrock x99 extreme 6

If you have any render or preview problems just turn off MP because, first, it only works with certain specific effects and codecs, and 2, it causes more problems that it solves most of the time. I only turn on MP rendering when I know for sure that it will speed up my workflow.
You should have a multiple of 4 GB assigned to AE and Other apps and an even number of cores. If you are using MP rendering make sure that the number of actual cores used makes sense and that there are an even number of cores assigned to other applications. Most important of all, don't spend hours trying to tweak MP rendering to save a few seconds in a render. Follow these general guidelines and then run a short test to see if it works. If you project involves any temporal effects at all turn it off.
Here is an example of the MP settings for a 4 year old Mac Mini that actually work for some projects, but most of the time it is turned off.
I should say that I can allocate 3 GB of ram per background CPU and still see 2 as the actual CPU's that will be used but this little Mac Mini works better with 2 selected. Setting the RAM allocation to 4 GB drops Actual CPU's to 0
BTW, I use the mac mini to record most of my tutorials because I figure that if I do a tutorial that will run OK on a Mac Mini, then anyone with an adequate system should be able to follow along without any problems.

Macbook won't start on battery power

I have a six-week old Macbook. Was working just fine until today.
Now it will not boot up on battery power. Works fine when Magsafe is connected and the battery is showing that it's fully charged (100%). When disconnected from AC power it powers off immediately and won't boot up.
Have tried a SMC reset. Didn't help. Any guesses what the problem might be?
Thanks in advance.

Currently, there are two very similar problems with the MacBook batteries, I've found.
The first is that the computer IS recognizing that the battery is there, and the MacBook shuts down almost as soon as AC power is removed. The usual diagnosis here is that you have a bad battery.
The second variant is that the computer is NOT recognizing that the battery is there (the X through the battery literally means the computer thinks you have no battery connected), and the omputer behaves he same way as the one in the first scenario. This usualy means that you have another type of bad battery, or the battery does not have a full connection.
Either way, I reccomend that you follow these steps:
1. test the battery by pushing the small button next to the set of LEDs on the battery pack, and make sure the LEDs light up. If they do not, the battery is most likely deffective.
2. Make sure there is no foreign object or corrosion causing a bad connection with the battery. You should be ably to do this by removing the battery and looking at the metal contacts on both the battery and computer.
3. Make sure your software and firmware are updated. To do this, click the apple pull-down menu in the top left corner of the sceen, and select "About this mac". Then, click the Software Update button.
4. Reset the PRAM, PMU, SMC, and make sure the battery is properly installed. Find instructions on Apple's website.
If all else fails (or if the battery proves to b defective in step 1), call Apple or visit an Apple store to get tested, and replacements.
I hope this helped. Nobody bothered to answer my post, and I had to find this information out from a buddy of mine.

Itunes won't start when i plug in my ipod

itunes won't start when i plug in my ipod touch

Good catch! Glad you got things working again.

MBP won't start on battery even tho its charged.

Hi,
I have a Mac Book Pro which I bought sometime in April. Just yesterday, when I unplugged the AC adaptor, the computer shut down, even though the battery says it is fully charged.
The green lights on the battery itself are all on.
When I try to start up my Macbook without the AC adaptor, it turns on for a second(i hear the superdrive turning), then it shut downs again. I just got this computer..whats the deal . Good thing I have apple care.
Oh, I tried to restart the PMU. I shutdown comp, take ac adaptor out, and battery out, and click on the power button for five seconds. Still no progress. I saw another thread on this..let me see if it'll help.

I report another case of the identical problem: The MBP will not start on battery alone, though it is completely charged as indicated both by the menu bar and by battery LED's. Furthermore, disconnecting the power adapter while running, causes the computer to go down immediately and completely, despite fully charged battery.
The behavior began abruptly after about ten weeks of normal use, though it was preceded in the last week or two by a few instances of the battery running completely down without a "low power" warning. Whether these are related symptoms, I don't know, but have read a number of reports of the latter problem.
I will request a new battery from Apple Care, but it sounds as if this may not get to the heart of the problem. Any further info would be appreciated.
MacBook Pro Mac OS X (10.4.7)

My new iPad2 won't start up or shut down and I'm getting an error message OxE80000651

My iPad won't start up or shut down and I'm getting an error message when plugged into iTunes as OxE8000065!

Is it frozen on a certain screen? If yes, this happened to me when I tried updating the software on my iPad. (I have the iPad 1) All you have to do, is hold down the home button and sleep/wake button at the same time, for about 5 or so seconds. The iPad then should do a Factory Reset and turn on. After that, just connect the iPad to your computer and sync it to get all of your stuff back on it. I hope this helped! If not, could you give me any more info?

My phone turned off out and it won't start again, and it was fully charged. How can I fix it?

My phone turned off out and it won't start again, and it was fully charged. How can I fix it?

Thank You! It worked

Non of my video links seem to work; bbcipalyer keeps on loading filmon goes black website news programs won't start, i downloaded puffin player and through that films and newssites work , youtube won't part etc etc. I have a ipad2

Non of my video links seem to work; bbcipalyer keeps on loading filmon goes black website news programs won't start, i downloaded puffin player and through that films and newssites work , youtube won't part etc etc. I have a ipad2

Non of my video links seem to work; bbcipalyer keeps on loading filmon goes black website news programs won't start, i downloaded puffin player and through that films and newssites work , youtube won't part etc etc. I have a ipad2

X server won't start after recent catalyst-test and kernel upgrade

Hi,
after recent upgrade of catalyst-test (13.2) and kernel (3.7.5), my x server won't start with this log (WW) and (EE) only:
[ 114.989] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 116.077] (WW) Falling back to old probe method for fglrx
[ 116.093] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 116.101] (EE) fglrx(0): DAL initialization failed!
[ 116.101] (EE) fglrx(0): Display Infrastructure Failed
[ 116.101] (EE) fglrx(0): PreInit failed
[ 116.212] (EE) Screen(s) found, but none have a usable configuration.
[ 116.212]
Fatal server error:
[ 116.212] no screens found
[ 116.212] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 116.212] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 116.212] (EE)
[ 116.515] Server terminated with error (1). Closing log file.
My card is mobility radeon hd 5700, I'm running on x86_64 system. I'm using aticonfig generated xorg.conf. I will provide any other information if needed.
I've tried:
- to downgrade to catalyst 12.8 and xorg 1.12 (screen just freezes after trying to get to X, only poweroff button works (system catches the signal and shuts down softly - no errors in Xorg.0.log))
- to use catalyst-total 13.1 / catalyst-generator 13.1 (Xorg.0.log says something about *not* compatible module - i can try it again and give you the whole log, it is probably another problem)
- to use open-source drivers (poor performance, overheating)
- to check nomodeset option (present at all kernel images in generated grub.cfg)
Unfortunately, I could not find any similar issue solved in past few days...

Downgrading kernel to 3.7.4 actually worked for catalyst 13.1. Anyone knows what could be wrong for linux 3.7.5?
Edit: catalyst-test 13.2 beta works with linux 3.7.4.
Last edited by sirkubador (2013-02-05 14:24:44)

Hi, I have a Macbook Air 13 "and I have a problem with it starting when I open it and the logo appears below a cerculer that spins and nothing else. Still not opening up

Hi, I have a Macbook Air 13 "and I have a problem with it starting when I open it and the logo appears below a cerculer that spins and nothing else. Still not opening up

Hi aysha13
Do check the article provided by BGreg. If it's not a h/w issue, you will be able to resolve it.
Good Karma.
Holydevil.

My Mac Pro won't start. It turns on and then a blank, white screen appears. What do I do?, My Mac Book Pro won't start. It turns on and then a blank, white screen appears. What do I do?

Mac Pro won't start. It turns on and than a blank, white screen appears. What do I do?

This could be a software/state problem or a hardware problem. Here are steps to resolve the former.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570

My iPad 1 won't hold a charge for very long and will only fully charge when turned off while plugged in. Will a full reset fix this?

my iPad 1 won't hold a charge for very long and will only fully charge when turned off while plugged in. Will a full reset fix this?

maybe but
most likely no
if you have many apps running and using data and localization at the same time yes maybe
but batteries get worse and worse and worse over time until they die a software reset will not change that

My iPad 2 Wireless / 3G was fully charged. A message popped up to update software to latest version. I clicked on "update" and the battery drained immediately and now does not charge. Has anyone else encountered this?

My iPad 2 Wireless/3G was fully charged. A message appeared saying to update the software. I clicked on "update" The battery immediately discharged and now will not charge again. Does anyone know how to fix this?

Plug it into the wall charger.
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Lenovo G510 won't start when battery is on and it's fully charged

Similar Messages

Maybe you are looking for