Lenovo Yoga disables WiFi for all devices

I have a Lenovo Yoga 2 that connects fine via LAN cable, but when i disconnect and try to use WiFi it disables my wireless router for all devices. The wireless router works fine for windows phones, android phones and other laptops. The Yoga disables WiFi every time it connects - is there some setting i can change to fix this? how do i diagnose what is going on? I've checked Ipconfig /all but it looks normal. Any ideas? thanks

Sounces like the network is overloaded, or there's interference.
Try ethernet.

Similar Messages

I loose wifi for all devices once apple tv logs on to wifi

i have to reset modem and router to be able to log back onto wifi with any device for some reason it just takes over
my router is new its good for more than one device ?

Sounces like the network is overloaded, or there's interference.
Try ethernet.

SNR License Issue. How Can I Disable SNR for all Users?

Hi,
I Have an issue with SNR on CUCM 10.5 and with assignement of license type
I have a cluster with 400 users.
200 users use ip phone 3905 and should be use an Essential License.
When system check for assignement of license type , itassign a Basic License instead of an Essential License, because it see that users have SNR Enabled.
All users in my system have SNR enabled, and I can not disable it. All my user have Enable Mobility unchecked, and all my phone have Device Mobility Off, but system however see SNR enable.
How can i disable SNR for all users? This is a feature that client don't need.
I dont' have a sufficent number of licenses for support all 3905 in Basic License.
thanks for help.
Andrea

Well actually, Mobile Identity wouldn't apply to a 3905 unless those phones had another line on a Dual-Mode device like an iPhone or Android phone. So unless you have either of those in your system you can scratch that idea. Someone else may chime in here and try to help a bit more as RD/RDP are the main SNR culprits.

LMS 4.1 shows "No records" for all devices

Hello everyone,
One of our end clients noticed that there is a "No records" message when choosing to show syslog messages for all devices that are configured on his LMS.
Under "LMS - Admin > System > Server Monitoring > Processes" I can see that the "SyslogAnalyzer" and "SyslogCollector" are showing as "Running normally"
Also see attached screenshot:
I would really appreciate your advise on this issue.

hello Daniel,
you are getting syslogs but they are getting filtered .
go to >>
Admin > Network > Notification and Action Settings > Syslog Message Filters
and change the filter settings . Try >> KEEP and Enabled combination. after changing settings check the syslogs collector status , Keep an Eye on the Forwarded column, you should see counts in it instead of zero .
you might need to play with filter settings to get this worked.
This is how Filters works:
Scenario 1:
All filters are disabled. Mode:Keep (Like in Our case with
Disabled the LINKUPDOWN and Mode is Keep .so all the messages for that
LINKUP DOWN will be only Forward)
All messages will be forwarded.
Scenario 2:
All filters are disabled. Mode:Drop
All messages will be filtered.
Scenario 3:
Atleast one filter is enabled. Mode:Keep
Only those syslog messages that satisfy the enabled filters will be
forwarded and all others will be filtered.
Scenario 4:
Atleast one filter is enabled. Mode:Drop
Only those syslog messages that satisfy the enabled filters will be filtered
and all others will be forwarded
Thanks-
Afroz
[Do rate the useful post]

HT201251 I want to use 30 ipads to run kiosk software in my restaurant. Can I use one Apple ID (and one credit card) for all devices

I want to use 30 ipads to run kiosk software in my restaurant. Can I use one Apple ID (and one credit card) for all devices?

Alternatively you can always manage your iPads (does not matter how many) with a single apple id and all reporting to your account under "find my device" service. Keeping an eye on all your units. Additionally as you mentioned these are for your Restaurant you may find the solutions offered by this company who creates apps and hardware for this purpose: http://www.spartakioskpro.com
Additionally if you expand beyond those 30 iPads to say 300 you will want to enable or plan on MDM as your best option to automate every ipad to use the same profile and app and ios configuration while also keeping a close eye on all of them via online MDM services like: https://meraki.cisco.com/products/systems-manager
Here is a pic

How can I keep lion from generating .DS_Store files on windows network partitions, but not disable it for all network partitions?

How can I keep lion from generating .DS_Store files on windows network partitions, but not disable it for all network partitions? I am fimilar with changing the setting for all network partitions(defaults write com.apple.desktopservices DSDontWriteNetworkStores true), but that is undesirable when I connect my laptop to my home network. A preferable solution would be where I could control the writing of these files based on disk format (NTFS vs HFS+).

Go to MacUpdate or CNET Downloads and search for ds_store. There are numerous utilities for preventing them from being transferred to Windows systems.

How can I create a magazine web app for all devices?

How can I create a magazine web app for all devices?

magazine web app is not supported in DPS as of now. You can share the contents to preview it on web content viewer.

For me, a time capsule is even safe when you have whatter damage op fire in your house. Am I wrong or is it just an additional HD like there are so maney with the only advantage that it goes automatically via your wifi for apple devices?

For me, a time capsule is even safe when you have whatter damage op fire in your house. Am I wrong or is it just an additional HD like there are so maney with the only advantage that it goes automatically via your wifi for apple devices?

Jloe,
As I have posted before, You, and others having issues with Verizon would be much better off if you complained to the FCC and FTC as well as your Senators and Congressmen. We, as individuals, have such small voices - use them where they might do the most good.
Also, don't assume that Verizon doesn't monitor these postings, they actively do & sometimes contact those that post complaints.
Sorry for your problems. GC

Home pc is under my husband's user id, I have an iPad and iPhone under my apple id. I have more music on my iPad then on pc or iPhone. If I set up synching over wifi for my devices... What do they sync to? Will the songs on iPad be added to phone/pc?

Home pc is under my husband's user id, I have an iPad and iPhone under my apple id. I have more music on my iPad then on pc or iPhone. If I set up itunes synching over wifi for my devices... What do they sync to? Will the songs on iPad be added to phone/pc? Or will the iPad and iPhone be synced (matched) to pc and reflect what is on that device?

Home Sharing is designed to work on your local network not across the internet/cloud.
Stuff is accessed under the Computers column where your local iTunes library on a local computer would appear.
Home Sharing would share your iTunes content (i.e. stuff stored in itunes on the computer, not in the cloud) with AppleTV or an iPad etc on the SAME network.
AppleTV2 will not be able to see itunes content on the work computer over the internet. It's not designed to. if the work computer was on the home network it would.
iCloud is in it's infancy and is not a mature product - iTunes TV Show purchases appear on AppleTV, but currently music does not unless you are subscribed to iTunes Match. I find this rather odd to be honest, along with the inability to buy music on AppleTV2. Movies purchased in iTunes are not authorised for iCloud viewing currently either.
Maybe it has something to do with iTunes Match 'getting in the way' - i think they assume you'll use that whereas you really want to be able to access Purchased music from the cloud without subscribing to itunes Match which is overkill for some.
AC

Best Adobe Captivate Screen Size for all Devices?

Which would you say is the best screen size to use to cater for all device types (pc, laptop, tablet, mobile, etc.)?
Thanks.

Hi there,
You can select any moderate screen size and publish the course and on the publish dialog box, check "Scalable HTML content" (only in case of .swf, HTML5 and PDF).
If you are not sure about which screen size to choose and you are creating a course for large audience for devices and systems of different resolution, then 800 X 600 is recommended.
But now, with scalable HTML content checked, your course window will fit to the screen size of the device, and there will not be any scroll bar.
Thanks.

How to block a website (for all devices) on an EA6900

I'm trying to figure out how to block a website for all devices connected to my router. The only thing I can find is blocking websites by device. Please tell me that they did not take this feature away.

welcome to the 'smart' world. I think one of the best improvements Belkin could do is to give us back the option of the old gui. so much more useful.

Merging 2 apple id's in family for all devices

Is there an easy way to merge 2 different apple id's in the same family for all devices & iCloud?

No

LMS 4: VLAN config fetch failing for all devices

LMS 4.0.1, standalone on W2K8 R2, new install
Vlan config fetch is failing for all devices. If I attempt to put a vlan.dat file in tftpboot and then manually copy a vlan.dat file from a device, the following is returned:
TFTP: error code 2 received - 16739
%Error opening tftp://server_name/vlan.dat (Permission denied)
The Windows application logs ont the server log this:
Log Name:      Application
Source:        CRMtftp
Date:          6/15/2011 2:07:49 PM
Event ID:      3
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      server_name
Description:
GetEffectiveRightsFromAcl failed: Overlapped I/O operation is in progress.
(997)
I tried restarting crmtftp, but no luck. Any ideas what may be causing this?
-Jeff

I have the same issue with a freshly installed 4.2 version now:
Log Name:      Application
Source:        CRMtftp
Date:          2/24/2012 12:30:50 PM
Event ID:      3
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      srvwienlms.nts.local
Description:
GetNamedSecurityInfo failed failed: The operation completed successfully.
(0)
I will also open a TAC case, lets see if we still have to stick with a3.x TFTP binary...
br.herwig

Apps for all devices?

I am a freelance deisgner with a Individual account through Creative Cloud. If Iwant to create apps for all devices, not just iPad, through DPS what do I need to do, or is this possible with the set up I have?

CC accounts provide only Single Edition for iPad. For any other device
you'll need a Pro account at a minimum.

Trying to install Airport Express kills wifi connection for all devices!

I changed the wi-fi security from WEP to WPA2 on my parents Westell 327w (802.11g) and I updated their iMac, iPod touch and their iPad. All good. Then I get a call from them that the light on the Airport Express (AE) is staying yellow. Crap, I forgot to change that. So next time I'm there I unhook the Ethernet cable from the iMac and plug it into the AE and use the Airport Utility to change the security setting (first I reset it). It gets to the point where it is updating and it seems to be taking forever and I happen to look at the iMac Airport menu bar icon and it shows what I interpret as a dropped connection (no bars) (the iMac was on wifi since I was using the Ethernet cable for the AE). Airport Utility reports an error of some sort and wants me to restart it. Every device -- iPad, iPod touch, iMac -- does not connect because they no longer recognize the WPA2 password. I put the Ethernet cable back into the iMac so I could use the web interface for the Westell and after an hour of deleting settings, hitting forget connection, and disabling and re-abling WPA2 security somehow I got wifi going again. Then I decided to try the old AE again. Same thing happened all over again. UUUUGGGGHHH!!!!! Please, for the love of God, can someone tell me what is happening? Sometimes the Westell drops connections (like to the iPad) but usually turning it off and on restores it. Maybe it just dropped by coincidence as I was updating the AE but I've never seen all devices not recognizing the WPA2 password. Does anyone have any idea what is going on? Thanks.

Open Airport Utility (open Spotlight and type Airport Utility) and follow the on-screen instructions. If you still have trouble give AppleCare a call this can walk you through the process.

Lenovo Yoga disables WiFi for all devices

Similar Messages

Maybe you are looking for