Leopord Users with intermittent access problems
We have intermittent issues with network users on two separate servers not being able to login, or loading the wrong group permissions from the server. We have tried deleting /Library/Managed Preferences on the local machine to force reloading,and it sometimes fixes the issue but not always. We end up logging in/out and restarting a number of times until the right permissions load. Apple says upgrade to Snow Leopard, but that would mean new intel based servers and we have apps that have not been approved on snow leopard.
Does anyone have any other ideas how to deal with this issue, ie, does anyone use the computer list in workgroup manager?
Welcome to the Apple Discussion forums.
Setting the options using the Print & Fax dialog box seems to be saving the installed options for a test printer I just installed using the lpadmin command. You could also try using the web interface at _http://127.0.0.1:631/printers_. Just click on the printer and then choose set default options from the pop up menu.
Matt
Similar Messages
-
Airtunes user with a minor problem: Ethernet
Hi everyone I am a mostly satisfied Airtunes user with a minor problem I hope someone can help me with.
The Airtunes/Airport Express is working perfectly with my stereo and my usb printer. But even after reading and tinkering I cannot make it connect via ethernet to my G3 iMac.
My setup is thus: A G5 Dual 2Ghz has the Airport Extreme card inside it and the aerial attached. That's in the studio. In the lounge is the stereo, Airport Express and the printer and iMac.
I have the Airport Admin Utility 4.2 and there are no updates available according to Software Update. I don't have any security activated and have turned internet sharing off for the base station. I have turned WDS on. The amber light has been flashing since I first plugged the Express in yesterday. I'm using OSX.3.9 and the Admin Utility still says I am on a WAN Network, even though I am trying to setup a LAN thing so I can access the printer and G5 from the imac through the ethernet cable.
Reading around I have discovered advice that says things like: 'yes, you can connect via ethernet to an existing network using WDS... 'and then stops there. It doesn't say how, or if it says 'the Express base station needs a static ip for the ethernet to see it', it never says how to assign the ip, what it should be, just assumes I must know what that means, rather than going through the necessary steps.
So could someone please help with this? To me this seems the absolute most basic setup anyone would use and should be in the manual, or at least on the Airport Support site. Why can't the imac (also using OSX.3.9) scan for available networks and see what is hanging off the other end of the ethernet cable?I could be mistaken, but I believe it is not possible to do what you are trying to do. I don't think you can connect the Airport Express via WDS to an airport card installed in a Mac.
You were correct when you enabled WDS on the Airport Express in an effort to share the internet connection, but I think you are only half-way there. I think you need to add an Airport Extreme to your network to act as the WDS master for the Airport Express.
In this case, you would put the Airport Extreme next to the G5. You would plug the internet connection (from DSL or cable or whatever) into the Airport Extreme. You would then set it up as a WDS master and add the Airport Express to the new wireless network using the Airport Utility that comes with the Airport Extreme.
Lastly, you connect the G5 wirelessly to the new network and plug the iMac into the ethernet port on the Airport Express. The iMac will not know it is on a wireless network. It will just get an address through its ethernet connection and start working. -
Users with direct access to tables
I need to find out which users have direct access to tables, not through the roles.
Is dba_tab_privs the right table to query or table_privileges is the correct one.
Please let me know the difference between these two.
I have gone through the documentation but I am still not clear about the difference between them.
Let me know whatever your thoughts are on this.
Thanks,
RushiAh, an opportunity to illustrate the value of COMMENTs:
SQL> select * from dict where table_name = 'TABLE_PRIVILEGES';
TABLE_NAME
COMMENTS
TABLE_PRIVILEGES
Grants on objects for which the user is the grantor, grantee, owner,
or an enabled role or PUBLIC is the grantee
SQL> select * from dict where table_name = 'DBA_TAB_PRIVS';
TABLE_NAME
COMMENTS
DBA_TAB_PRIVS
All grants on objects in the database
SQL>So, TABLE_PRIVILEGES is a view relevant to the user who is currently connected and SELECTing from it.
DBA_TAB_PRIVS is what you want to use to find users with direct access granted to tables. -
Security batch job to evaluate users with SAP_ALL access:
Hello,
I need to run some kind of batch report or program that runs for users that have SAP_ALL access.
Basically we need to run a report or program that shows what these users that currently have SAP_ALL are executing on a daily basis.
Do you have or know of a report/program that we can schedule nightly to find this information out ?
Thanks,
SteveHi Steve,
I don't think any SAP standard report or query is available for this. You probably have to design your own Z report/query to achive this.
However since SAP_ALL is a restricted access and you will have very few users with this access, if you want to find it out programs/transation being executed by these users, it can be done manually from ST03, through "Memory Use Statistics", probably this may help to identify the tables using which you can design your own report.
Regards,
Sanujit
Edited by: Sanujit Purohit on Jul 20, 2010 2:25 AM -
Set Single user with reviewer access to multiple conference room calendars
Want to add a single user with reviewer access to multiple conference room calendars, used the below but it given a below error , Single user i am able to add but single user for multiple confernce room calendars hot happening.
Import-csv C:\smtp1.csv | foreach-object {Add-MailboxFolderPermission -identity $_mail":\Calendar" -User "Mike" -AccessRights "Reviewer"}
Smtp1.csv
mail
[email protected]
[email protected]
Error:--
[PS] C:\>Import-csv "C:\smtp1.csv" | foreach-object {Add-MailboxFolderPermission -identity "$_mail:\Calendar" -User "Mike" -AccessRights "Reviewer"}
The specified mailbox "\Calendar" doesn't exist.
+ CategoryInfo : NotSpecified: (0:Int32) [Add-MailboxFolderPermission], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : 78C23328,Microsoft.Exchange.Management.StoreTasks.AddMailboxFolderPermission
The specified mailbox "\Calendar" doesn't exist.
+ CategoryInfo : NotSpecified: (0:Int32) [Add-MailboxFolderPermission], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : 78C23328,Microsoft.Exchange.Management.StoreTasks.AddMailboxFolderPermission
The specified mailbox "\Calendar" doesn't exist.
+ CategoryInfo : NotSpecified: (0:Int32) [Add-MailboxFolderPermission], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : 78C23328,Microsoft.Exchange.Management.StoreTasks.AddMailboxFolderPermission
The specified mailbox "\Calendar" doesn't exist.
+ CategoryInfo : NotSpecified: (0:Int32) [Add-MailboxFolderPermission], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : 78C23328,Microsoft.Exchange.Management.StoreTasks.AddMailboxFolderPermissioni tried with that as well but getting the below
A positional parameter cannot be found that accepts argument ':\Calendar'.
+ CategoryInfo : InvalidArgument: (:) [Add-MailboxFolderPermission], ParameterBindingException
+ FullyQualifiedErrorId : PositionalParameterNotFound,Add-MailboxFolderPermission
A positional parameter cannot be found that accepts argument ':\Calendar'.
+ CategoryInfo : InvalidArgument: (:) [Add-MailboxFolderPermission], ParameterBindingException
+ FullyQualifiedErrorId : PositionalParameterNotFound,Add-MailboxFolderPermission
A positional parameter cannot be found that accepts argument ':\Calendar'.
+ CategoryInfo : InvalidArgument: (:) [Add-MailboxFolderPermission], ParameterBindingException
+ FullyQualifiedErrorId : PositionalParameterNotFound,Add-MailboxFolderPermission
Cannot process argument transformation on parameter 'Identity'. Cannot convert value "" to type "Microsoft.Exchange.Configuration.Tasks.MailboxFolderIdParameter". Error: "Valu
e cannot be null.
Parameter name: mailboxFolderId"
+ CategoryInfo : InvalidData: (:) [Add-MailboxFolderPermission], ParameterBindin...mationException
+ FullyQualifiedErrorId : ParameterArgumentTransformationError,Add-MailboxFolderPermission -
Users with read access to the site unable to view Managed Metadata Navigation
Hi everyone,
I created a Managed Metadata service and created group, term-set and terms
I gave read access to users
I set up navigation to use Managed Navigation
I am logged in as farm admin and able to view the navigation when i browse site. But user are not seeing navigation.
One thing i noticed is when i give users full access or designer access to site they will be able to see the navigation. but i don't want to give users full access or designer access to the site.
How can users with read only access to site can view Managed Metadata Navigation...Please help?Hi Sunil,
Have you given your users permissions to actually read the MMS data from the service application?
http://technet.microsoft.com/en-us/library/ff625176.aspx covers permissions on the MMS.
Regards
Paul.
<<edit>> On reflection you might be hitting the issue in this Stackexchange post..
http://sharepoint.stackexchange.com/questions/75636/permissions-and-managed-metadata-in-navigation Is yours behaving the same way?
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times. -
User with Full Access to mailbox cannot view calendar
I have a user who one of several users that manages the schedules for several conference rooms using regular mailboxes on Exchange Server 2007. She (and she alone), has lost the right to manage the mailbox calendar. When she tries to access the
calendar she gets the error message, "You do not have permission to view this calendar".
I verified her rights as Full Access and even ran the cmdlet below which says, "Appropriate ACE is already present on object ".
[PS] C:\Windows\system32>Add-MailboxPermission -Identity "mailbox" -User user -AccessRights FullAccess -InheritanceType All
WARNING: Appropriate ACE is already present on object "CN=mailbox
49,OU=Service Accounts,OU= xxx,OU=xxxxx),OU=xxx,DC=xxx,DC=xx,DC=xxx" for
account "user".
Identity User AccessRights IsInherited Deny
Domaim domain\user {FullAccess} False False
When I get the permissions on the mailbox she has the following:
AccessRights : {FullAccess}
Deny : False
InheritanceType : All
User : domain\user
Identity : domain/OU/OU/OU/mailbox
IsInherited : False
IsValid : True
ObjectState : Unchanged
Any help out there?
[email protected]Hi,
According to your post, the permission seems to be configured properly in your Exchange server. This user has full access permission to Domaim’s mailbox.
Please try to open shared mailbox in OWA to check whether she can access the calendar. In Outlook, we can open shared calendar in Calendar panel by clicking Open Calendar > Open shared calendar. If it fails, please try the following steps:
1. Click File > Account Settings > Change > More Settings > Advanced.
2. Add the Shared mailbox that you want to open and click OK.
If there is any updates, please feel free to let us know.
Best Regards,
Winnie Liang
TechNet Community Support -
Giving List Permission to users with no access to the main site
On my sub site I have a list (where users from a specific store can report errors). This list I want to share with another group of users, those who will do something about the errors (entrepreneurs). I want them to be able to Edit in this list: they don't
need delete and create items, just being able to change an item is fine.
The problem is, I don't want them to have access to the sub site itself, because there is information on the sub site that they don't need to know about, they should only see this list. So they don't have any access at all to the sub site, but I'm giving
them permission to the list.
However, it seems like since they can't access the sub site, no matter what permission I give them to the list (Edit, Contribute, Full Control), in the end they only have Reading-access to the list and can't even update an item.
This error message turns up whenever they try:
"Unable to communicate with server".
The entrepreneur group is external users, but that shouldn't matter, should it? I've added them to SharePoint groups with the right permissions.
Is there any possible way to solve this problem?Hi ,
Here is the steps you can refer to:
Go to your site ->Site Settings ->Site permissions ->Permission Levels ->Click “Add a Permission Level” and create a custom permission level with following permissions :
Edit Items, View Items, Open Items, View Pages , Open.
Go to your list ->Shared With -> INVITE PEOPLE :
input your group, click “SHOW OPTIONS”
and select the new custom permission level.
Best Regards,
Eric
Eric Tao
TechNet Community Support -
I have a 2007 iMac running OS X Lion, all latest updates and patches applied.
My daughter has an account on the system, which I have limited to only being able to be used for a few hours a day.
The problem arises when she leaves herself logged in, but walks away, and the time runs out. When I sit down at the console, the first thing that happens is that the cursor disappears, and the systems starts to go into a logout. Makes sesne so far, I guess. However, the system then goes into what I can only presume is some sort of loop. The cube animation starts, and rotates back and forth several times between two screens, both equally hessian wrapped, with no distinguising features.
I can log into the system via ssh, and I can confirm that the system is spiking out on SecurityAgent:
Processes: 661 total, 5 running, 29 stuck, 627 sleeping, 2082 threads
19:59:08 Load Avg: 1.68, 3.07, 5.24 CPU usage: 43.38% user, 23.52% sys, 33.8% idle SharedLibs: 3620K resident, 1948K data, 0B linkedit.
MemRegions: 104350 total, 1295M resident, 189M private, 2974M shared.
PhysMem: 1166M wired, 3312M active, 1655M inactive, 6133M used, 9560K free.
VM: 1611G vsize, 1118M framework vsize, 34169473(356) pageins, 5796949(92) pageouts.
Networks: packets: 100372238/47G in, 162918821/146G out. Disks: 23914908/3252G read, 27697160/2570G written.
PID COMMAND %CPU TIME #TH #WQ #PORT #MREG RPRVT RSHRD RSIZE VPRVT VSIZE PGRP PPID STATE UID FAULTS
27013 SecurityAgen 98.0 37:41.27 2/1 1 88 84 508K 3904K 2664K 31M 2410M 27013 1 running 92 3028
28561 top 25.9 02:27.05 1/1 0 32 43 3752K 216K 4176K 20M 2381M 28561 28505 running 0 1924014+
1 launchd 4.6 50:43.63 3 0 3159- 343 2804K+ 2836K 2128K+ 15M+ 2405M 1 0 stuck 0 553252+
0 kernel_task 1.5 08:01:03 71/2 0 2 976 14M 0B 595M- 15M 5487M- 0 0 running 0 23008
197 WindowServer 0.7 01:57:50 5 1 6653 6448 22M+ 885M 486M+ 137M 40G 197 1 sleeping 88 25934192+
18548 Transmission 0.5 01:59:18 7 1 175 372 10M 7352K 16M- 47M 2550M 18548 282 sleeping 501 10297632
14 opendirector 0.4 02:27.27 13 13 617+ 108+ 6072K+ 1872K 6860K+ 32M+ 2417M+ 14 1 stuck 0 407028+
25117 mcxalr 0.2 00:40.33 4/1 3 43 41 200K 252K 1780K 30M 2391M 25117 1 running 54 1580
26441 SecurityAgen 0.2 00:01.55 2 1 121 245 2856K 19M 6820K 35M 2503M 26441 1 stuck 92 27427
28001 ManagedClien 0.1 00:00.11 4 3 98+ 86 1196K+ 4900K 3748K+ 31M 2413M 28001 27998 sleeping 0 3718+
294 UserEventAge 0.1 00:20.22 3 1 212 140 976K+ 3964K 2632K+ 34M 2422M 294 282 sleeping 501 294201+
28006 ManagedClien 0.0 00:00.11 4 3 97 86 1184K+ 4904K 3700K+ 32M 2414M 28006 28003 sleeping 0 3725+
28573 mdworker 0.0 00:00.41 4/1 2 55 101 8648K 6052K 13M 38M 2422M 28573 28443 running 89 4766+
27831 loginwindow 0.0 00:00.50 4 2 153+ 108+ 1692K+ 4804K 3252K+ 35M+ 2425M+ 27831 197 sleeping 0 4875+
15 configd 0.0 00:33.57 6 1 2316 230 2392K 1788K 3524K+ 27M 2420M 15 1 sleeping 0 320735+
28318 loginwindow 0.0 00:00.54 3 1 151 101 924K+ 4712K 3120K+ 33M+ 2423M 28318 197 sleeping 0 4778+
Now, obviously, because I can ssh in, I can start a clean shutdown and restart, but I'd like a way to do this that doesn't involve me bringing down the system, when the whole point of multiple users and parental controls is that a system can be shared cleanly.
Thoughts?
Thanks,
WillSee if this blog post that our support team created helps you with the connection information. This can create the desktop Access application linked up to the Access 2013 web app tables you have.
http://blogs.technet.com/b/the_microsoft_access_support_team_blog/archive/2014/03/24/how-to-make-external-connections-to-an-access-web-app-new.aspx
Also, you might just try clicking the Create Reports button in the Access web app client interface and Access will create the reporting database for you with links to the web app tables. On the File menu (when using the Access web app in client) make sure
to click the option to Allow Any Location under the Manage button. After that, just click the Create Reports button on the File menu (right above the Manage button) and wait a few seconds. Access will create a new desktop database linked up to all of the Access
web app tables. You can then create as many reports or other desktop objects as you like.
Hope that helps,
Jeff Conrad - Access Junkie - MVP Alumnus
Senior Content Developer - Office Content Development Team - Microsoft Corporation
Author - Microsoft Access 2013 Inside Out
Author - Microsoft Access 2010 Inside Out
Co-author - Microsoft Office Access 2007 Inside Out
Access 2007/2010/2013 Info: http://www.AccessJunkie.com
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/en-us/legal/Copyright/Default.aspx -
I want to be able to create directory user ID for the iPlanet administrators. They should be able to access the admin console and all the instances created. They should be able to configure each instance and directory. I was able tocreate Admin Server Administrators but they were only able to modify the directory(tab) and not the configurations(tab). Any help would be greatly appreciated!
Thanks.
KeithHi Keith,
In o=netscaperoot, edit the static group called cn=Configuration Administrators, ou=Groups, ou=TopologyManagement, o=NetscapeRoot - this group contains the admins peer to your config admin. Since the console is quirky and doesn't let you add in users not in netscaperoot, just click advanced and put in the full dn of whoever you want in by hand, e.g., uid=scarter, ou=people, dc=mydomain,dc=com as a static member. then rebind to the console with the full dn and passwd, and away you go :)
james -
Users with diff. access
Hi,
I am new to Web Logic. I created a cluster using 6.0SP2. Now I want to give
different users diffrent access to Console.
For an e.g. I would like some users to deploy ear files but not modify any
thing else on the setup.
I tried creating users and giving some Administrators access, but at the
login prompt, when I tried with that login ID, it does not allow to login.
Please help.
Thanks,
ARHello Ove-André Gjertsen,
If you are working with version 2.2 or higher, you should check the following - http://download-uk.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28550/bldapp.htm#CHDEJDGB - Controlling Access to Applications, Pages, and Page Components.
Regards,
Arie. -
New user with strange font problem
I created a user account for my girlfriend...when she brought up the safari the google homepage had a strange grafiti font for all the text. (I say strange, but it's one of my many fonts in the collection) I opened up firefox and had the same problem...this morning I realized it was doing it in mail as well. Under my account (the admin and original account) there isn't an issue, but I've looked all over and can't find a setting to fix it for her account.
It's driving me nuts. Any help would be greatly appreciated.
15" Titanium Powerbook Mac OS X (10.4.8)..."I say strange, but it's one of my many fonts in the collection"...
Since it sounds like you know the name of the font, you could try to see if anything turns up with the command below, which searches through user preferences for a given string:<pre>defaults find "font name"</pre>A partial font name should be fine. Enter the command using "/Applications" > "Utilities" > "Terminal.app".
Also, the caches (associated with a user by the 'uid') don't appear to be cleared when an account is deleted. So if a new user is created and gets assigned a previously used 'uid', they may inherit the old cache files. For starters, try clearing out any file or folder whose name contains the user's 'uid', such as the "/Library/Caches/com.apple.IntlDataCache.###" file or the "/Library/Caches/com.apple.ATS/###" folder belonging to the affected user. Then log out and back in. To determine the user's 'uid', try:<pre>id -u username</pre> -
First time Mac User with a video problem
Hi. First of all I am a brand new Mac user. I am having problems watching videos. It constantly plays for a second or two, possibly a minute and then stalls....I wait....it picks back up, plays for a second or two longer and repeats the process, so basically it is a very bad viewing experience all around doing this. I have all the software updates. I am a former pc user so trying to adjust to the Mac. I don't know where to begin on fixing this so if someone has any insight or could help it would be great.
I have also noticed it is doing the same start-stop activity when trying to listen to a 30 second music clip in itunes....start, stop, start, stop. So you never get a continuos listen to those clips or watching any video. Very annoying and there has to be a way to fix this, just don't know how to do it on a mac. Need a little help.If you are using wireless, you might want to try plugging your computer directly into the cable or DSL modem and running the speedtest again. This will determine if it's a connection problem, or a problem with your wireless (possibly your router). I recently had a router go bad, and the only symptom was it was cutting the connection speeds in half, both wired and wirelessly. When I plugged straight into my cable modem I had full speed.
What is really strange is the disparity between your upload and download numbers. Usually, the upload is 1/10 of the download, not 2x larger. I've only seen this at work where they throttle our download speeds to 6,000 kbps to keep us from downloading large files for free on the wireless, while the upload speed runs 20,000 kbps. At my home, for example, I have 4,000 kbps download, and 400 kbps upload. -
New user with a small problem...I bet...
I just started using flash, but I am getting a bit better. I
purchased a template through monster and have slowly picked up on
flash. Here is my problem and forgive if I use incorrect
terminology or seem ignorant...
I have a page on my site that has 4 buttons on each
side...movie clip over a button...looks like a bar with a small
arrow movie clip on the end. I am sure you know what I mean. When
you roll the mouse pointer over the page it obviously is supposed
go through its actions and alert user there is a link. If I put my
code on the movie clip, you have to move the mouse over the arrow
to show the link. If I put my code on the button layer, it causes
all 8 of the buttons to have the same action/link and if I change
one it changes all.
website:
http://www.accordproperties.net
rentals page
What am I doing wrong? I can't seem to figure it out.
Textreduce the size of your #mainCotent to something like 580px and the white space is the top margin and top padding of the <h1>...simply zero it out in your css. Same issue with the last <p> in your #mainCotent...padding and margin is keeping the footer from coming up all the way. Also give your #mainContent some padding to push the text inward. Then you can also give the imgs some padding as well to space off the text. Going to take some fine tuning but this will at least get you started.
-
Same user with different access rights depending on internet or intranet
Hi gurus,
I'm faced with the following situation. Users are able to access our portal (EP7.0) via Intranet as well as via Internet. But via Internet the users shouldn't be able to access security critical content (sitting in an internet cafe and checking accurate BI reports wouldn't be a nice thing).
So, how can we achvieve this?.
- Dynamic role assignment? So after login we should determine internet/intranet (eg http header set by our reverse proxy).
- PCD filtering? In this case we need to set custom attributes on iViews for restricting internet access and then write an PCD filter.
Any other suggestions?
Thanks a lotHi,
R u using SAP Web Despatcher?
Then use URL Filtering and block the URL'S accessing from the internet in Web despatcher.
If the user is in intranet any way he can access because he will access the server directly without web-despatcher.
Thanks,
gopal
Maybe you are looking for
-
Recording Audio from additional sources: Why doesn't the "Audio File" show
Hi, when recording audio from another source and saving: where does logic store the file? Shouldn't it be in the "audio' folder or the set path you set it to>? For some reason after we record the "Audio File" we recorded is not to be found in the "Au
-
I forgot the answers to my security questions, so I logged into my account and had a help email sent to my email address. The email did not come to my email address. How do I retrieve the answers to my security questions?
-
My ipod is formatted to windows, I now have a mac...
Hi, my ipod is formatted to Windows, but I now have a mac. Is there a way to change it, and what difference does it make? Any help would be appreciated x
-
My order has been stuck in processing status for almost a week now
Hello VZW community, I ordered a new phone, for an early upgrade, on last Wednesday (4/15) and even paid extra for 1 day shipping. It is now 5 days later and after having checked my order status, it still says: Your order is currently being processed
-
Blackberry epub reader (Buku Reader)
hi, I want to share Blackberry Application for reading epub & text http://appworld.blackberry.com/webstore/content/52662?lang=en Buku Reader is an epub & text Reader (DRM-free epub) for BlackBerry® Buku Reader allows you to import epub and text file